Termoformavimo mašina su etiketavimo įrenginiu

VC 999 RS Series 459/230

Gamybos metai: 2002, būklė: labai geros būklės (naudotas), 10-2 Bar, pagaminimo metai 2002 Gbedpeykyqisfx Afqot

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, slėgis: 16 juosta, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, temperatūra: 400 °C, įėjimo įtampa: 6 000 V, sukimosi greitis (min.): 1 500 aps./min, sukimosi greitis (maks.): 1 500 aps./min, aušinimo tipas: oras, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed and never commissioned, still covered by manufacturer’s warranty. Following a revision of the long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator, complete as per original OEM supply, is now available for sale. The unit is NEW, manufactured and fully tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in a controlled indoor environment. Immediate availability allows you to bypass the usual production lead times, which for this kind of equipment are typically 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual casing turbine (Steam Part A + Steam Part B) - 3-shaft integrated gearbox (2 pinions + central gear) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - 3-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, prepared for parallel grid operation Systems included: - Integrated oil system in base frame - Main mechanical oil pump and auxiliary electric oil pump - Local control panel on skid - Control and protection panel equipped with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration plants Gsdpfxjyidvdo Afqebt - Process steam energy recovery - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Possibility of installation and commissioning with manufacturer support Possible fields of application: - Biomass and waste-to-energy plants, for production of electricity and process steam, with immediate unit availability — no multi-year production lead times - Industrial cogeneration (CHP) in plants with continuous process steam usage (paper, food, chemical, and manufacturing industries) - Revamping/repowering of existing plants, as a fast-track alternative to new OEM supplies with 24–36 month delivery times Price: Upon request. Further technical information and documentation available upon request.

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001 degrees SUBSPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel path: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES Gbedpfx Aoyw H Szsfqot - 3-color status light - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt

Būklė: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on milling spindle: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis swivel range: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on milling spindle: 6 x VDI25 Gsdpfev Ig Avex Afqsbt TOOL CHANGER - Tool changer type: Bar magazine - Number of tools in magazine: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg OPERATING HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control system: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal system

Būklė: geras (naudotas), Gamybos metai: 2003, tekėjimo ilgis: 1 505 mm, Turning-milling center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical data: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of tool magazine positions: 120 pcs. Tool interface milling spindle: HSK 63 Gsdpfjwzbq Tox Afqjbt Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool interface: HSK 63 Lower turret: X-axis: Z-axis: Speed driven tools: Number of turret stations: 12 pcs. Tool interface: VDI 40 Accessories: - Chip conveyor - High-pressure system 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, veikimo valandos: 29 000 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, The INDEX C200 – built in 2009 – is a high-performance CNC production turning center equipped with a FANUC 31i control, main and counter spindle, and a 65 mm bar capacity. The machine features a premium 3-turret design, with turrets 1 and 2 each providing X-, Z-, and Y-axis movement, while turret 3 is dedicated to operations on the counter spindle. All three disc turrets offer 10 stations each, enabling highly flexible complete machining with powered tools at up to 6,000 rpm. Equipped with a parts handling gantry, conveyor, C-axes on both main and counter spindles, and powerful spindle drives, this machine is particularly suitable for productive series manufacturing of complex turned/milled components. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disc turrets Bar capacity: 65 mm Machine bed: vertically arranged cast iron machine bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Output: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: 0.001° resolution Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Output: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: 0.001° resolution Counter spindle Z-axis: 700 mm travel Z-axis rapid traverse: 50 m/min Tool carriers / turrets Three-disc turret configuration, each with 10 stations. Tool system for 10 stations: Cylindrical shank DIN 69880 – Ø30 x 55 mm. Tool carrier 1 X-, Z-, Y-axis 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm as per documentation Y-axis: 100 mm, ±50 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X-, Z-, Y-axis 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Used exclusively for machining on the counter spindle X-axis: 180 mm Powered tools: 6.5 kW / 16 Nm / 6,000 rpm Additional technical equipment as per documentation Gbjdpfx Afoy Tmhzsqjt Gantry loader with numerically controlled Z-axis Part discharge from main or counter spindle onto conveyor Remnant removal from main spindle into remnant bin Gantry loader: Traverse speed: 100 m/min Travel range: 70 mm Maximum workpiece diameter: 90 mm Maximum workpiece length: 250 mm Maximum remnant length: 250 mm Maximum workpiece weight: 3.5 kg Hydraulic system: Delivery flow: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery flow: 19 l/min Cooling unit capacity: 13 kW Coolant system: Pump flow rate: 80 l/min / 8 bar Tank volume: 300 l Chip conveyor: Chip discharge height: 1,250 mm

Gamybos metai: 2003, būklė: paruoštas naudoti (naudotas), Galima Gildemeister CNC dvigubos galvutės tekinimo staklė su Y ašimi. Strypo pralaida: 32 mm, įrankių vietos: 2x12, pagrindinio ir priešpriešinio veleno greitis: 8000 aps./min, valdymas: Siemens Sinumerik 840D Powerline, darbo valandos: 39 426 h, veleno valandos: 25 529 h. Komplekte yra KSS sistema, įrankiai ir trumpų strypų padavimo įrenginys 1500 mm Iemca Vip 80E. Yra dokumentacija. Galima apžiūra vietoje. Tikimasi, kad bus prieinama nuo 2026 m. balandžio pabaigos. Gsdeygw Svopfx Afqobt

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, MAJA ice flaker Year of manufacture: 2009 Voltage: 400 V, 3 Ph, 50 Hz, 5.42 A Power: 1.9 kW Refrigerant: R404A Dimensions: MAJA unit: 800 x 600 x 860 mm Crate: 1350 x 1900 x 1670 mm Godpfx Ajv S H Tpefqjbt

Gamybos metai: 2015, būklė: labai geros būklės (naudotas), „Octopus“ – automatinis svėrimo įrenginys su spausdintuvu, skirtas etiketėms spausdinti. Svorio diapazonas: nuo 40 gramų iki 6 kg. Pagamintas iš nerūdijančio plieno. Įrengtas VWS spausdintuvo etikečių spausdinimo modulis, modelis LPX R Blow XL, PX4 / 300. Šiuo metu naudojamos 100 mm pločio etiketės. Matmenys: 1700 mm ilgis, konvejerio juostos plotis – 300 mm. Gsdpjn R Syijfx Afqobt Vaizdo įrašas, kuriame matomas įrenginys veikiant, gali būti pateiktas pagal užklausą. Būklė – puiki.

Gamybos metai: 1990, būklė: naudotas, 2016 m. įrenginys buvo kapitaliai suremontuotas pas originalų gamintoją. Nuo to laiko jis labai mažai dirbo, o dabar jau keletą metų sandėliuojamas ir neprijungtas. Gedpoyaczpofx Afqobt