Varžtų pirkti naudotą (630)

Būklė: dilaminuotas dirbtuvėje (naudotas), unidad completa de plastificación para DEMAG 2.300 con husillo y cilindro de 80 mm Ncsdjfwcttspfx Acpor

Būklė: naujas, NEW! Screw & barrel, incl. heating band Screw: 35 mm Ncodpfxsilhvde Acper Injection unit: 350 Article no.: LA198

Būklė: geras (naudotas), Grease pin for rope pulley, wire rope pulley, deflection pulley, crane rope, four-rope clamshell grab, polyp grab, mechanical clamshell grab, clamshell bucket, ship unloading grab, scrap grab, waste grab, rope grab, grab bucket, pin crane pin, grease pin -Grease Pin: Crane pin type 75x145 M48 -Shaft diameter: Ø 59.6 mm -Quantity: 7 pins available -Price: per piece -Dimensions: Ø 80 x 170 mm Ncsdpov Illcjfx Acpor -Weight: 3.9 kg/pc.

Būklė: geras (naudotas), WSM Stationary Screwdriving Unit, Screwdriving Station Assembly of components for car radios and navigation systems, as well as testing of the same. The assembly station is enclosed in a protective housing. The service doors are equipped with monitored safety switches with interlock (locking mechanism). In automatic mode, the doors are locked and can only be opened after an emergency stop or in manual mode by pressing the door button on the control panel. Automatic operation cannot be started if a door is open. Process Sequence The station is loaded with the pre-assembled module via the conveyor belt. Below are the automated station work steps for processing a workpiece carrier (WT). Under normal operation, all three stations work in parallel. - Positioning of the WT with the pre-assembled module in station 2.1 - Lowering of the carrier with scanner and vision sensor - Scanning of the three codes (front panel, front PCB, SD PCB), cross-check with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the WT onto the conveyor - Positioning the WT with the pre-assembled module in station 2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT onto the conveyor - Positioning the WT with the pre-assembled module in station 2.3 - Lowering of the light protection hood and contacting, approaching the carrier with test sensors from below - Type-dependent testing of the illumination of SD and CD slots and pushbuttons - Functional test of the CD ejection button - Lowering the WT onto the conveyor > continue If errors occur during testing, they are displayed on the screen and can be remedied if possible. To do this, switch to manual mode and open the doors. After repair and restarting automatic operation, the WT in the station will be retested. If repair is not possible (e.g. screwdriving error), the WT is marked as NIO (Not OK) in the control system and is not processed further. A manual NIO marking and ejection is also possible. Ncodpfxoibichj Acper Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more new and used assembly stations in our shop! International shipping rates available on request!

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1988, CARLO SALVI 635 SV Overhauled to CE standards 6.35x70 mm 360 ppm Available with RF System for semi-pierced parts - New Electrical System compliant with CE, including Inverter and PLC - New Lubrication System - New Motor with Disc, Pulley, and Brake Ncjdsh N Dh Ajpfx Acpor - New Drawing Roll Pump - New Belts - Grinding of all main unit parts (Slide, Gibs, and Caps) - Replacement of Pins, Bronze Bushings, and Nuts - New Bearings - Shims for gears VISIBLE IN CALOLZIOCORTE (LC) at HBR srl, who will carry out the complete overhaul

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Tucker / Emhart Stud Welding System – DCE1500 + ETF50D + EFM2100 Handheld Stud Welding Gun Manufacturer: Emhart Teknologies / Tucker GmbH System consists of: DCE1500 Control & Power Unit ETF50D Stud Feeder EFM2100 Handheld Stud Welding Gun Made in Germany Description: This complete Tucker / Emhart stud welding system is designed for manual stud installation and is commonly used in: - Body construction - Repair departments - Pre-series production - Manual workstations - Maintenance & rework The combination of automatic stud feeding, a powerful energy supply, and an ergonomic handheld welding gun makes this system ideal for: ✔ Manual point stud welding ✔ Flexible workstations ✔ Applications where robots cannot be used ✔ Rework on body and structural components Technical details (from nameplates): 1️⃣ DCE1500 Control & Power Unit Art. No.: T022 910/400 Power: 400 V – 50/60 Hz Type: DCE1500/5.021.20.05.0400.S Serial No.: 13/3705380250001 - Supplies energy for stud setting - Process monitoring and control - Perfect for manual welding stations 2️⃣ ETF50D Feeder: Art. No.: T044 067/400 Nodpfxox Thg Ss Acpecr Power: 400 V – 50/60 Hz Type: ETF50D.07.69/6.17-36F13.3 Serial No.: 08/2496740200001 - Automatic feeding of studs into the welding gun - Robust, fast, industrial-grade 3️⃣ EFM2100 Handheld Stud Welding Gun: Art. No.: T0580 Type: EFM2100.00.01/5.16F8 Serial No.: 10/2879300500091 - Handheld device, not a robot-guided head - Compact, ergonomic, highly reliable - Ideal for rework, repair, or flexible applications Typical applications: - Manual stud welding - Bodywork service - Repair and rework stations - Pre-series and prototype production - Mobile or small production cells

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Stanley Tucker Stud Insertion System TE1500 + TF21D + LM310 – Stud Welding & Joining System Manufacturer: Stanley Engineered Fastening / Tucker / Emhart System components: Control Unit / Power Supply: TE1500 (Item No. T028 618/400) Feeding Unit / Feeder: TF21D (Item No. T059 060) Stud Insertion Tool: LM310 (Item No. T133 016) Made in Germany Description: This professional Tucker stud insertion system is a complete industrial joining package for fully automated installation of: - Weld studs - Press-in studs Ncodex Tfypepfx Acpor - Fastening elements for car bodies - Structural and sheet metal joints Tucker / Stanley systems are used worldwide in automotive manufacturing because they are: - extremely reliable - highly precise - durable - ideal for integration into robotic cells The system consists of: 1️⃣ TE1500 Control Unit / Power Supply - Supplies the insertion tool - Regulates process parameters - Input: 400 V, 50/60 Hz - Type: TE1500/3.032.55.03.0405.X - Serial No.: 14/4409830349001 2️⃣ TF21D Feeding Unit - Automatic provision & feeding of studs - Mains voltage: 24 V - Type: TF21D.00.00/5.16F8 - Serial No.: 14/4328730020002 3️⃣ LM310 Stud Insertion Tool - Pneumatic/servo-assisted insertion gun - Type: LM310/K.00.00 - For final placement / pressing-in / insertion of studs - Power: "Stud 5.14" (system-specific input value) - Serial No.: 13/3850680080004 Technical Data (from nameplates) Control Unit TE1500 - Mains voltage: 400 V - Frequency: 50/60 Hz - Type: TE1500/3.032.55.03.0405.X Feeding Unit TF21D - Power supply: 24 V - Type: TF21D.00.00/5.16F8 - Automatic feeder for studs / fasteners Insertion Tool LM310 - Type: LM310/K.00.00 - High-precision insertion module for body construction Typical Applications - Automotive industry / OEM production - Robotic cells (KUKA, ABB, FANUC, retrofit systems) - Structural sheet assembly - Joining technology for body components - Series production with high volumes

Būklė: geras (naudotas), Faceplate Njdpfx Ascx N Atscpscr Diameter 500 mm 475 rpm

Būklė: naudotas,

Būklė: geras (naudotas), Suvirinimo kaiščiai, keraminiai žiedai, viršūninio uždegimo kaiščiai, galviniai kaiščiai - Suvirinimo kaiščiai: su keraminiais žiedais, 40 skirtingų tipų Nodpfx Acomxpt Iepscr - Kiekis/atlikimas: žr. nuotraukoje esančią detalių sąrašą - Parduodama/kaina: tik visas komplektas - Matmenys: 1200/800/H120 mm - Bendras svoris: 64 kg

Būklė: naudotas, Gamybos metai: 1998, Darbinis slėgis 8,5 bar Našumas litrais: . l Bendras galios poreikis: 454 kW Keturi vienetai komplekte Ncodjx Edwuspfx Acpor Vulcast Pakrauname mes Gera būklė Pagaminimo metai: 2013 Svoris apie 8 t vienam 3 vnt. zr 450 1 vnt. zh 500 Visi kaip komplektas

Būklė: geras (naudotas), CNC pull studs, tool holders, tool clamping systems, milling holders, milling tools - Quantity: 28 pieces - with: groove ring - for: SK50 holders - Thread: M24 - Price: for the complete lot Ncedpfed D Iq Njx Acpor - Weight: 6.8 kg

Būklė: geras (naudotas), CNC pull studs, tool holders, tool clamping systems, milling holders, milling tools Nodpfxsb A Rbbs Acpscr - Quantity: 43 pieces - Features: with circlip groove - Suitable for: SK50 tool holders - Thread: M20 - Price: for the complete lot - Weight: 13.5 kg

Būklė: geras (naudotas), Screws, hexagon head bolts, socket head cap screws, Allen screws Ncedpfxsb A R Udj Acpjr - Various sizes - Various grades: 4.6 / 5.6 / 8.8 - Various manufacturers: Fuchs, Würth, Sisma, FS - Euro pallet: 1 - Weight incl. packaging: 340 kg

Būklė: geras (naudotas), Varžtiniai spaustuvai, vamzdžių spaustuvai, vamzdžių tvirtinimai -DN: 20/22 -DN: 25/28 -DN: 32/34 Ncsdpfx Acjb A Sl Rjpsr -DN: 40 -DN: 50/52 -DN: 65/70 -Kaina: komplektas -Pakuotės svoris: 21,5 kg

Būklė: geras (naudotas), Ball screw with nut, Transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded bar -Manufacturer: Rexroth -Type: R150257086 -Type: 69115 40H Ncodpfxjcp Anpj Acpor -Thread diameter: 48 mm -Thread pitch (two-start): 20 mm -Overall length: 1995 mm -Weight: 26 kg

Būklė: geras (naudotas), Approx. 870 SSI Schäfer R3000 shelf panels, shelves approx. 1m x 0.40m – used –: Price per unit: only €8.50 (net), packed and loaded ex location! Minimum purchase: 1 pallet (approx. 180 units) Manufacturer: SSI Schäfer Model: R3000 Year of manufacture: unknown Dimensions: approx. 1m x 0.40m 870 shelf panels Load capacity per shelf: at least 100kg Condition: good Ncjdpfx Ajki T Akecpjr Available: immediately Location: Frankenberg / Saxony

Būklė: geras (naudotas), Approx. 24 SSI Schäfer R3000 frames, depth 30 cm – used – : Price per unit: only €30 (net), packed and loaded ex location! Manufacturer: SSI Schäfer Model: R3000 Year of manufacture: unknown Frame height: approx. 2.28 m Frame depth: 30 cm Condition: good Nedpeki Tz Aofx Acpecr Available: immediately Location: Frankenberg / Saxony

Būklė: geras (naudotas), skirtingos modifikacijos IšxPlxAukšt 112x72x117 cm iš viso 460 vnt. Ncsdpfx Ajxv S Euocpor IšxPlxAukšt 112x72x95 cm iš viso 154 vnt. IšxPlxAukšt 150x94x82 cm iš viso 12 vnt. IšxPlxAukšt 102x62x79 cm iš viso 33 vnt.

Būklė: naudotas, Gamybos metai: 1997, Delivery pressure: 10 bar Flow rate: 1,500 l Operating hours: 5,111 h Total power requirement: 11 kW Ncsdpfoid S Trjx Acpsr Machine weight: approx. 250 kg

Būklė: naudotas, Faceplate diameter 510 mm Pitch circle diameter max. 171.4 mm Ncodpofu Tr Ijfx Acpjr Camlock size 8 Clamping plate Camlock mount size 8 according to DIN 55029 Pitch circle diameter 171.4 mm

Būklė: naudotas, Faceplate diameter: 400 mm Njdpfx Aofu Tr Socpocr Maximum pitch circle diameter: 133.4 mm Short taper mount, size 6 / DIN 55027 Faceplate / four-jaw chuck with individually adjustable jaws Short taper mount, size 6 according to DIN 55027 Stud bolts with collar nut Including 2 sets of jaws

Būklė: beveik kaip naujas (naudotas), Set, packed in wooden crate, screw and cylinder barrel for 150 mm extruder Ncjdpfx Ajdm Aghjcpjr nitrided feed section, screw with shearing and mixing section

Gamybos metai: 1993, veikimo valandos: 104 599 h, būklė: geras (naudotas), Marke: Cincinnati Milacron Austria GmbH Typ: CMT 35 Maschinennummer: 2005723/10 Schraubenart: Konische Doppelschnecke Ncodpfx Ajvl Hzgocpsr Baujahr: 1993 Betriebsstunden: 104.599 Stunden Schneckendurchmesser: 35 mm Abmessungen (LxBxH): 3.200 x 1.500 x 1.720 mm Gewicht (ca.): 2.000 kg

Būklė: naujas, PTG – Štampavimo kaiščiai 9 ir 10 mm Ø, priekalas 15°, spaudimo/lyginimo plokštelės, PMH – priekalas 15° ir kiti, spaudimo/lyginimo plokštelės 6°/4° ir 8°/5°, POR 40/42U – Štampavimo kaištis 9,5 mm Ø, priekalas 9,5 mm Ø Njdopfaxuopfx Acpscr