Varžtų pirkti naudotą (313)

Sąlyga: naudotas, Faceplate, faceplate chuck, four-jaw chuck, facing lathe chuck - Chuck size: 415 mm Hsdpfx Acsd S Hp Sjuofn - Inner diameter: 105 mm - Bolt circle diameter: Ø 172 mm - Weight: 49 kg

Sąlyga: geras (naudotas), WSM Stationary Screwdriving Unit / Screwdriving Station Hfodpfxjibichj Acujn Assembly of components for car radios and navigation systems, as well as testing of the same. The assembly station is enclosed by a protective housing. The service doors are equipped with monitoring switches and interlocks (locking mechanisms). The doors are locked during automatic operation and can only be opened during an automatic stop or in manual mode after pressing the door release button on the control panel. When the door is open, automatic operation cannot be started. Functional Sequence: The station is loaded via the transfer belt with the pre-assembled unit. Below are the operating steps of the automatic station during the processing of a workpiece carrier (WT). In normal operation, all 3 stations operate in parallel. - Positioning of the WT with the pre-assembled unit in St.2.1 - Lowering the carrier with the scanner and vision sensor - Scanning of 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the WT onto the conveyor - Positioning the WT with the pre-assembled unit in St.2.2 - Positioning the screwdriver and screwing the front PCB - Lowering the WT onto the conveyor - Positioning the WT with the pre-assembled unit in St.2.3 - Lowering the light protection hood and contacting, positioning the carrier with the test sensors from below - Type-dependent testing of the lighting for SD and CD slots and buttons - Functional test of the CD eject button - Lowering the WT onto the conveyor > continue If errors occur during testing, they are displayed on the screen and can be rectified if possible. To do this, switch to manual mode and open the doors. After repair and restarting the automatic mode, the WT in the station is tested again. If a repair is not possible (e.g. screwdriving error), the WT is marked as NOK in the control system and is not further processed. Manual NOK marking and ejection is also possible. Additional assembly stations, new and used, can be found in our shop! International shipping costs on request!

Sąlyga: naudotas, Faceplate diameter: 400 mm Maximum pitch circle diameter: 133.4 mm Hodpfxofu Tr Sj Acujfn Short taper mount, size 6 / DIN 55027 Faceplate / four-jaw chuck with individually adjustable jaws Short taper mount, size 6 according to DIN 55027 Stud bolts with collar nut Including 2 sets of jaws

Sąlyga: geras (naudotas), Approx. 870 SSI Schäfer R3000 shelf panels, shelves approx. 1m x 0.40m – used –: Price per unit: only €8.50 (net), packed and loaded ex location! Hsdjki T Akspfx Acujfn Minimum purchase: 1 pallet (approx. 180 units) Manufacturer: SSI Schäfer Model: R3000 Year of manufacture: unknown Dimensions: approx. 1m x 0.40m 870 shelf panels Load capacity per shelf: at least 100kg Condition: good Available: immediately Location: Frankenberg / Saxony

Sąlyga: naudotas, Gamybos metai: 1990, Progressive header SACMA SP.140 Perfect working condition Available for any test Technical data: Hodpfx Acow Eluwjujfn Number of dies: 3 Heading force: 420 kN Maximum cutoff diameter (500 N/mm²): 8 mm Maximum cutoff length: 65 mm Maximum die kickout stroke: 45 mm Maximum punch kickout stroke: 14 mm Production rate: 350 pcs/min Main motor power: 19 kW Die diameter: 45 mm Die length: 75 mm Punch diameter: 38 mm Net weight: 8,500 kg Gross weight: 10,000 kg Condition: Very good, fully operational Year: 1990 Ready for immediate delivery The machine operates flawlessly. Available at HBR srl - Calolziocorte (LC), Italy

Sąlyga: naudotas, Gamybos metai: 1974, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: N32469, National double-action press M68, used, year of manufacture 1974, Hjdpfx Acjwiuy Rouefn

Sąlyga: naudotas, faceplate, rotary table, clamping plate - Faceplate: Ø 2300 mm - Thickness: 70 mm Hodpfx Acjd I Da Teusfn - Center bore: Ø 370 mm - Weight: 2313 kg

Gamybos metai: 1993, veikimo valandos: 104 599 h, Sąlyga: geras (naudotas), Marke: Cincinnati Milacron Austria GmbH Typ: CMT 35 Maschinennummer: 2005723/10 Schraubenart: Konische Doppelschnecke Baujahr: 1993 Betriebsstunden: 104.599 Stunden Schneckendurchmesser: 35 mm Abmessungen (LxBxH): 3.200 x 1.500 x 1.720 mm Hsdjvl Hzgjpfx Acuofn Gewicht (ca.): 2.000 kg

Sąlyga: naudotas, Faceplate diameter 510 mm Pitch circle diameter max. 171.4 mm Camlock size 8 Clamping plate Camlock mount size 8 according to DIN 55029 Pitch circle diameter 171.4 mm Hjdpfx Acsfu Tr Isuefn

Sąlyga: geras (naudotas), Approx. 24 SSI Schäfer R3000 frames, depth 30 cm – used – : Hodpfx Aceki Tz Asuefn Price per unit: only €30 (net), packed and loaded ex location! Manufacturer: SSI Schäfer Model: R3000 Year of manufacture: unknown Frame height: approx. 2.28 m Frame depth: 30 cm Condition: good Available: immediately Location: Frankenberg / Saxony

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1983,

Sąlyga: geras (naudotas), Gamybos metai: 2003, THROUGHFEED AUTOMATIC DRILLING AND INSERTING MACHINE with roller and belt panel return system Hfodpfx Acoiy D U Ioujn CONFIGURATION: • Lower head with 5 + 3 spindles • No. 2 automatic hinge feeders • No. 1 vertical magazine WORKING FIELDS: • X-axis (min/max): 250 / 2,500 mm • Y-axis (min/max): 130 / 700 mm • Panel thickness (min/max): 15 / 50 mm OTHER SPECIFICATIONS: • Spindle rotation speed: 4,000 rpm • Compressed air operating pressure: 6 bar • NC 1000 control system DIMENSIONS: • 7,530 x 3,500 mm • Weight: 2,500 kg

Sąlyga: naudotas, Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 600 mm -Through-hole diameter: Ø 136 mm -Bolt circle: Ø 170 mm -Weight: 111 kg Hjdpfx Acofwncgsuefn

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, Progressive Header SACMA SP250 4 Dies – Used – In Perfect Working Condition Overhauled in 2025. Available for any test at HBR srl. Machine fully overhauled in 2025. Square wedges. Available with soundproof cabin, Brankamp process monitoring system, and conveyor belt. Technical Information: Number of dies: 4 Heading tonnage: 650 kN Maximum cutoff diameter at 500N/mm²: 10.5 mm Maximum cutoff length: 85 mm Maximum die kickout stroke: 65 mm Maximum punch kickout stroke: 20 mm Production speed: 275 pcs/min Main motor power: 30 kW Die diameter: 54 mm Hodpewq Dy Aefx Acuofn Die length: 90 mm Fixed punch diameter: 45 mm Fixed punch length: 100 mm Net weight: 11,000 kg Gross weight: 12,600 kg We welcome you to HBR srl in Calolziocorte (LC).

Sąlyga: naudotas, Faceplate, faceplate chuck, four-jaw chuck - Chuck size: Ø 500 mm - Without jaws Hfedpfsb A Sbpox Acujn - Camlock mount: Ø 196 mm short taper 11 - Bolt circle: Ø 204 mm - Weight: 80 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Progressive Header SACMA SP260 5 Dies – Like New – Fully Operational Available for any test at HBR srl from June 2025. Delivered fully painted and cleaned. Technical specifications: Number of dies: 5 Heading tonnage: 650 kN Maximum cutoff diameter at 500N/mm²: 10.5 mm Maximum cutoff length: 85 mm Maximum die kickout stroke: 65 mm Maximum punch kickout stroke: 20 mm Hodswar Efepfx Acuofn Production speed (pcs per minute): 275 Main motor power: 30 kW Die diameter: 54 mm Die length: 90 mm Punch diameter: 45 mm Net weight: 11,300 kg Gross weight: 13,000 kg We look forward to welcoming you at HBR srl in Calolziocorte (LC).

Sąlyga: naudotas, Faceplate, faceplate chuck, four-jaw chuck Hodpfx Aceb A Iqqsusfn - Chuck size: Ø 380 mm - 4-jaw chuck - Threaded mount - Weight: 40 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2024, CARLO SALVI PSV overhauled in 2024 Double-blow cold heading machine. New electrical system Technical Specifications: Min. and max. wire diameter: 0.8 - 3 mm Max. cut-off length: 37 mm Hfodpfx Acjv Tzgyjuon Max. shank length: 25 mm Max. output per minute: 600 pcs Motor power: 5 HP Net weight: 1,600 kg Dimensions: 1900 x 850 x 1100 mm

Sąlyga: naudotas, Faceplate, faceplate chuck, four-jaw chuck Hjdpfeb A Iuyox Acuofn - Chuck size: Ø 560 mm - Short-taper mount: Ø 122 mm - Bolt circle: Ø 170 mm - Weight: 100 kg

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1988, CARLO SALVI 635 SV Overhauled to CE standards 6.35x70 mm 360 ppm Available with RF System for semi-pierced parts - New Electrical System compliant with CE, including Inverter and PLC - New Lubrication System - New Motor with Disc, Pulley, and Brake - New Drawing Roll Pump Hfjdpfx Aoh N Dh Ajcusn - New Belts - Grinding of all main unit parts (Slide, Gibs, and Caps) - Replacement of Pins, Bronze Bushings, and Nuts - New Bearings - Shims for gears VISIBLE IN CALOLZIOCORTE (LC) at HBR srl, who will carry out the complete overhaul

Sąlyga: naudotas, Faceplate, rotary table, clamping plate - Faceplate: Ø 2300 mm - Thickness: 80 mm - Weight: 4450 kg Hfedpfx Acsd I Da Ueuon

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1989, COLD FORMING STAMPING MACHINE SACMA SP-27 BOLTMAKER with Pointer and Thread Roller Hfodpfxol Dw Aro Acusn Used, in excellent condition – fully operational 1980s 4 dies Max diameter: 10.5 mm Cut-off length: 85 mm Shank length: 65 mm Speed: 275 ppm

Sąlyga: naudotas, Clamping devices, clamping claws, low-profile jaws, clamping pads, clamping tools, step clamps, low-profile clamps, clamping bars, step blocks, clamping screws, T-slot bolts, groove bolts, T-slot nuts Clamping tool set of clamping screws with storage box -Type: various models, see photos Hfodpfxou Npgwj Acuon -Thread: M20 -Price/sale: complete set -Box dimensions: 380/315/H60 mm -Total weight: 11.7 kg

Sąlyga: geras (naudotas), Gamybos metai: 1970, For sale: Hilgeland model CH5AL header The machine is in perfect technical condition. Machine weight: approx. 20 tons The header is equipped with a comprehensive set of accessories. Loading provided. Maximum diameter of normalized bolt: 16 mm Hjdeu Szucjpfx Acuofn Maximum length: 200 mm

Sąlyga: labai geros būklės (naudotas), Siūlau baldų vežimėlius / sandėliavimo vagonėlius su šiais matmenimis: Plotis x Gylis x Aukštis: 2800 x 1110 mm ✅ Šiuo metu sandėlyje: apie 300 vnt. ✅ Pagal užklausą galimi ir kiti baldų vežimėlių dydžiai. ✅ Kiekvienas baldų vežimėlis pilnai atrestauruotas (plokščių, varžtų keitimas). ✅ Naudotiems baldų vežimėliams suteikiame 1 metų garantiją. • Tušti vežimėliai gali būti sudedami vienas į kitą Baldų vežimėlis idealiai tinka beveik bet kokių prekių vidiniam transportavimui ir sandėliavimui. Visi vežimėliai yra labai geros būklės. Sąskaita faktūra pridedama. Hfsdpfsxmt H Uex Acujn Pristatymas galimas visoje Europoje. KAM-KUB Logistic&Trolleys Europe – Jūsų specialistas baldų vežimėlių pardavimui ir aptarnavimui Europoje.