Stručiai pirkti naudotą (60)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2010, veikimo valandos: 1 721 h, Funkcionalumas: visiškai funkcionalus, pirmoji registracija: 07/2010, kuro tipas: elektrinis, Hako Jonas / Sweepmaster B 1500 RH Completely refurbished sweeper with new batteries, new drive wheel, 6-month warranty, and new DGUV V3 inspection including test certificate. Working width with side broom: 132 cm Central brush: 92 cm Maximum area performance: 7,300 sqm/h Container capacity: 240 L Drive type: battery Battery V/Ah: (36V 240Ah) wet cell Installed new parts / repairs carried out: - Fully overhauled sweeping unit incl. new PTO shafts, ball bearings, sealing strip, scraper strips, lift cylinder, anti-corrosion treatment, etc. - Trough battery (36V 450Ah) new (The battery is ordered new upon purchase and is installed before delivery/pickup) - All drive belts new - Sweeping container completely overhauled - Gas struts new - Tension springs new Gtedpfxeyccgke Ab Ssw - Main brush new - Side brooms new - Driver’s seat new - All rubber strips new - Cartridge filter new - All oils new - Oil filter new - All electric motor carbon brushes new - Exhaust hose new - Intake hose new Additionally, we offer: Service, repairs, and sales for all common Hako models.

Būklė: naudotas, Tugger train with 4 Liftrunner route trailers STILL Transport trolley, platform trolley Device type: Liftrunner Device designation: E-frame Device number: 5T 0501 A 00046 Payload: max. 600 kg Inner frame size: 1980 x 1050 mm Platform size up to center strut: 890 x 1050 mm Platform height lower: approx. 220 mm Gtsdpfxemxrv So Ab Ssw Platform height upper: approx. 260 mm Overall length per trailer without drawbar: 2250 mm Overall width: 1170 mm Overall height: 260 mm (frame height without superstructures) - Tugger train consisting of 4 Liftrunner route trailers - Each trailer has 2 platforms of approx. 890 x 1050 mm - 2 hydraulic quick couplings per trailer - 2 single-acting hydraulic cylinders above the axle for lifting the superstructure - Vulkollan band wheels Ø 140 x 55 mm - Uniform track width from first to last trailer due to central axle - Hydraulic lifting device, WITHOUT hydraulic power unit (hydraulics supplied by towing vehicle) - Without hydraulic hoses - Without drawbar - Previously used with half-pallet roller (not included) Weight per trailer: 325 kg Transport dimensions in transport frame (L x W x H): 2250 x 1200 x 1350 mm Total weight 4 trailers with post frame: 1400 kg

Būklė: naujas, 10x20m Mezzanine Platform, Load Capacity: 500kg/sqm, Underside Height: 3m, approx. 200 sqm, Modular System Platform Specifications: - Length: approx. 10m - Width: approx. 20m - Underside platform height: approx. 3.0 m - Top of platform: approx. 3.38 m - Total area: approx. 200 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm P6 chipboard, natural on top, white underneath - Support grid: 5.0m x 4.0m - NO CROSS BRACING, reinforcement via dome strut - Brand new ex works, plus freight depending on postal code Scope of delivery: - 20 x C profile 4000 mm, Sendzimir galvanized - 52 x S profile 4800 mm, Sendzimir galvanized - 18 x Columns 3000 mm, RAL 7016 - 3 x Dome strut 3049 mm, RAL 7016 - 93 x Chipboard panels 2400 x 1000 x 38 mm, natural/white P6 - 18 x Base plates for columns - 18 x Anchor bolt sets for columns Gtjdpjyr Ny Aefx Ab Ssw OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTE TAILORED TO YOUR REQUIREMENTS. Price: €20,938 net Plus applicable statutory VAT. You will receive an invoice with itemized VAT. Optional on request: - Collision protection - Guardrail - Transfer station - Stairs - Floor anchors - Steel structure can be powder-coated in the RAL color of your choice (standard RAL 7016) Transport: Delivery is available on request via our partner carriers. Costs depend on postal code. Assembly: Our trained staff are available upon request to assist with the professional assembly and disassembly of your facility. Our Recommendation: Let us know your requirements... We are happy to assist you with your projects—from planning and ordering to assembly.

Būklė: naujas, 10x25m Storage Platform, Load Capacity: 500kg/sqm, Clearance: 3.0m, Approx. 250sqm Modular Mezzanine Specifications: - Length: approx. 10m - Width: approx. 25m - Clearance below platform: approx. 3.0m - Top edge of platform: approx. 3.38m - Total area: approx. 250 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm chipboard, type P6, natural finish on top, white underside - Column grid: 5.0m x 4.15m - NO CROSS BRACING, stabilization via lateral strut - Brand new, ex works, plus freight according to destination postal code Scope of supply: - 020 x C-profile 4150 mm, Sendzimir galvanized - 004 x C-profile 4250 mm, Sendzimir galvanized - 066 x S-profile 4800 mm, Sendzimir galvanized - 021 x column 3000 mm, RAL 7016 - 004 x lateral strut 3049 mm, RAL 7016 - 0116 x chipboard 2400 x 1000 x 38 mm natural/white P6 - 021 x base plates for columns - 021 x anchor bolt sets for columns OUR DESIGN DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING, CUSTOMIZED QUOTE ACCORDING TO YOUR REQUIREMENTS. Price: €26,487 net plus statutory VAT You will receive an invoice with VAT stated separately. Options on request: - Impact protection - Guard rails - Transfer station - Stairs - Floor anchors - Steel structure can be powder-coated in your desired RAL shade (standard is RAL 7016) Transport: Delivery can be arranged on request by our partner forwarding agent. Shipping costs depend on the destination postal code. Gsdpoyr Nxlsfx Ab Setw Assembly: Our trained personnel are available to professionally install and dismantle your equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in the realization of your projects, from planning to ordering to installation.

Būklė: naujas, 21.25 m² mezzanine including staircase, railings on two sides, top edge at 300 cm, 500 kg/m² load capacity, immediately available from stock, accessible with a pallet truck, system mezzanine, steel platform, storage level Specifications: - Length: 5000 mm - Width: 4250 mm - Size can be extended upon request - Clear height below the mezzanine: 2612 mm - Support grid: 4605 x 3850 mm - Additional floor covering overhang of 200 mm - Supports, stairs, railing posts, cross bracing and struts powder-coated in RAL 7016 - Handrail, knee rail, upstand, main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - IMMEDIATELY AVAILABLE The mezzanine includes: - 04 x support posts - 02 x main beams C+350 - 06 x secondary beams S+260 - 01 x cross brace - 02 x struts - 10 x chipboard panels - 01 x staircase, 37° incline - Approx. 8.25 linear meters of railing - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €5,026.00 net €5,980.94 gross You will receive an invoice with separately stated VAT. Transport: Delivery can be made upon request by our partner carrier, costs depending on postcode. Assembly: Our trained staff are happy to assist you with the professional assembly and disassembly of your equipment if required. Gtsdjyr Nw Iepfx Ab Sow Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning to ordering and assembly. Interested or have questions? Contact us by message or phone. You can find our phone number on our company page. ☎️ We are available Monday to Friday from 08:00 to 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Būklė: naujas, 10x10m mezzanine storage platform, load capacity: 500kg/sq.m, clearance under mezzanine: 3m, approx. 100 sq.m, modular system platform. Specifications: - Length: approx. 10m - Width: approx. 10m - Clearance below platform: approx. 3.0 m - Height above platform: approx. 3.38 m - Total area: approx. 100 sq.m - Load capacity: 500 kg/sq.m - Decking: 38 mm chipboard P6, natural finish top, white underside. - Support grid: 5.0m x 5.0m - NO CROSS BRACING, stiffening provided by beam struts. - New, direct from factory. Freight charges depend on postcode. Gtjdpjyr Ivcefx Ab Sow Scope of supply: - 08 x C-profile 5000 mm, Sendzimir galvanized - 28 x S-profile 4800 mm, Sendzimir galvanized - 09 x Column 3000 mm, RAL 7016 - 03 x Beam strut 3049 mm, RAL 7016 - 47 x Chipboard panels, 2400 x 1000 x 38 mm, natural/white, P6 - 09 x Base plates for columns - 09 x Anchor bolt sets for columns OUR DESIGN DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTE TAILORED TO YOUR REQUIREMENTS. Price: €13,167 net plus applicable VAT You will receive an invoice with shown VAT. Options on request: - Collision protection - Guardrails - Transfer station - Stairs - Floor anchors - Steel structure available powder-coated in a RAL colour of your choice (standard RAL 7016) Transport: Delivery can be arranged through our partner freight forwarder; costs are postcode-dependent. Assembly: Our trained staff is available on request to assist with the professional assembly and disassembly of your facility. Our recommendation: Let us know your requirements... We are happy to support you in the realization of your projects, from planning and ordering through to installation.

Būklė: naujas, 10x20m Mezzanine Storage Platform, Load Capacity: 500kg/sqm, Underside Clear Height: 2.5m, Approx. 200sqm System Platform Specifications: - Length: approx. 10m - Width: approx. 20m - Underside of Platform: approx. 2.5m - Top Edge of Platform: approx. 2.88m - Total Area: approx. 200 sqm - Load Capacity: 500 kg/sqm - Decking: 38mm chipboard, type P6, natural finish on top, white underneath - Support Grid: 5.0m x 4.0m - NO CROSS BRACING, stabilised by purlin struts - New from factory, plus freight costs depending on postal code Scope of Delivery: - 20 x C profiles, 4000 mm, Sendzimir galvanized - 52 x S profiles, 4800 mm, Sendzimir galvanized - 18 x posts, 2500 mm, RAL 7016 - 3 x purlin struts, 2517 mm, RAL 7016 - 93 x chipboard panels, 2400 x 1000 x 38 mm, natural/white P6 - 18 x base plates for posts - 18 x anchor bolt sets for posts Price: €20,609 net Plus current statutory VAT You will receive an invoice showing VAT separately. Gsdpfx Aeyr Iu Eeb Sotw Options on request: - Collision protection - Railings - Transfer station - Stairs - Floor anchors - Steel structure can be coated in your choice of RAL colour (standard RAL 7016) Transport: Delivery by our partner forwarding company on request. Cost depends on the delivery postcode. Installation: Our trained personnel are happy to assist with the professional installation and dismantling of your factory equipment, if required. Our recommendation: Tell us your requirements… We are happy to help you realize your projects from planning and ordering through to installation.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Column-mounted slewing jib crane, Vetter, 1,500 kg, 6 m jib, 6 m height – unused – : Price ex location: only €13,950 (net)! Manufacturer: Vetter Model: Meister M Year of manufacture: 2022 Rated capacity P: 1,500 kg M15-6.0 Column-mounted slewing jib crane designed according to the EU Machinery Directive, EN 13001 including relevant standards, and VDE regulations, suitable for outdoor use up to wind force 4 Beaufort (20–28 km/h; moderate breeze). ID-No.: 50010400 EN 13001 HC2 S3 HD2 Slewing range SB: 360° ∞ Godeyhxk Hspfx Ab Sjtw Max. permissible hoist weight Gk: 180 kg Max. hoisting speed VH: 16 m/min Jib outreach A: 6,000 mm Lower edge of jib UK: 6,000 mm Overall height B: 6,470 mm Bolt circle diameter DL: 630 mm Flange outer diameter DF: 710 mm Beam flange width F: 180 mm Approach dimension Aa: 250 mm Approach dimension Ai: 915 mm Strut length B1: 1,540 mm Max. vertical force Vk: 32 kN Max. moment Mk: 11,575 kNcm Weight: 1,756 kg Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Coating of column for outdoor use (corrosivity category based on C3), steel grit blasted, finished in daffodil yellow RAL 1007, required film thickness 120 μm VETTER AnchorFix system, comprising anchor bolts, nuts, washers, lock nuts, and steel template. Bolt circle (DL) ø 630 mm. Foundation edge length (G): 2,400 mm × 2,400 mm, foundation depth (Gt): 1,000 mm. Flat trailing cable power supply with cable trolley, C-rail and tension arms for attachment to the beam. Short weather protection roof size 2, clampable to the crane jib, to shelter the hoist in its rest position. Robust, hot-dip galvanized steel tube frame with weather-resistant, plastic-coated tarpaulin cover, color rapeseed yellow RAL 1021. Essential for outdoor operation. Usable up to wind force 7. Dimensions (L x W x H): 1,320 x 1,520 x 1,042 mm Electric chain hoist manufacturer VETTER type electrolift® SiXX Designation: SiXX8F FEM classification 9.511 2m ISO classification M5 Number of load chains: 2 Capacity: 1,500 kg Lifting height: 5,351 mm Headroom: 649 mm Lifting speeds: 4 / 1 m/min Hoist motor: 1.45/0.36 kW Duty cycle: 40/20% Dead weight: 65 kg Protection class: IP55 Electric trolley type SiXX-EF-22-200 Travel speed: 24/6 m/min Trolley motor: 0.2/0.05 kW Duty cycle: 40/20% Dead weight: 19 kg Flange width: 180 mm Detailed terms & conditions and technical drawings available on request as PDF Original price: €18,436 (net) Condition: Excellent (this crane is brand new and unused – classic misconceived purchase) Availability: immediately Location: 30419 Hannover

Būklė: naujas, Gamybos metai: 2026, The KDP220TOP sandblaster is a top-quality product, delivering prolonged and reliable operation for users. It enables rapid and efficient cleaning of various types of components. The unit features a top-loading lid supported by telescopic struts, significantly enhancing ergonomics and facilitating the loading of heavy parts. Its 220-liter capacity allows for effective cleaning of large surfaces in a short time. Advantages of our sandblaster model: - Ready for immediate use - Ergonomic sandblasting gun with four interchangeable ceramic nozzles - Large, stable front door with a rubber peripheral seal for safe and dust-free operation - Telescopic struts for improved operator comfort - High-quality integrated rubber gloves - Vent connection - Powerful work area illumination - Four pieces of replaceable window protective film - Sandblasting hose located at the bottom of the collecting container - Suitable for use with various abrasives - Drain outlet for quick material changeover - User-friendly, reliable, and safe to operate Technical Specifications KDP220TOP Technical Data: AIR CONSUMPTION: 400–700 L/min MAXIMUM PERMISSIBLE PRESSURE: 8 BAR AIR CONNECTION: 1/4" quick coupler ABRASIVE CONTAINER CAPACITY: +/- 18 kg EXHAUST CONNECTION: 63 mm VIEWING AREA: 540 x 250 mm FRONT HEIGHT: 370 mm INTERNAL CABINET DIMENSIONS (LxWxH min-max): 840 x 550 x 370–550 mm EXTERNAL CABINET DIMENSIONS (LxWxH min-max): 890 x 560 x 1118–1380 mm WEIGHT: 49 kg DC23 Technical Data: MODEL: DC23 VOLTAGE: 220V POWER: 1200W VACUUM: >12 Kpa INLET DIAMETER: 45 mm CAPACITY: approx. 16 l Gjdpfx Ajvzqf Ujb Sotw Standard Equipment: - Work area illumination – 12V fluorescent lamp with 230V supply and switch - Two pairs of high-quality integrated rubber work gloves - Two exhaust (vent) connections, 63 mm and 90 mm diameter, for connecting an extraction unit - Sandblasting gun with four interchangeable ceramic nozzles (sizes: 4, 5, 6, 7 mm) - Four pieces of replaceable window protective film - Top lid with peripheral rubber seals for dust-free operation - Sturdy grid on the work area - Polish user manual - DC23 dust extraction unit - 2 m connection hose - Bag filter

Būklė: naujas, Gamybos metai: 2026, A professional folding machine with a 4.14 m working width, direct from the manufacturer Prod-Masz. Processable sheet thickness: steel sheet up to 0.7 mm, bending radius: up to 160° (suitable for forming seams). Both cheeks are CNC-machined from solid material, ensuring long service life. The machine is built heavy-duty, with a total weight of 700 kg! Think there’s no company that can handle your bending requirements? There is! Prod-Masz is your bending specialist! Especially with our folding benches! The sheet metal folding machine is equipped with a support for the cut sheet at the outlet, an angle gauge, adjustable angle stop, and gas struts for easy adjustment of the bending beam. Maximum working width of the folding machine: 4140 mm Bending capacity: up to 0.7 mm (steel sheet) Bending angle: up to 160 degrees Bending beam thickness: 20 mm Cutting with roller shear across the entire working width Upper beam can be lifted to three positions Gtodecgmd Ujpfx Ab Sew Pass-through opening: 80 mm Degree scale Angle stop Depth stop Total weight: approx. 700 kg Optional roller shear (max. cutting capacity up to 0.8 mm steel sheet): +350 EUR Manual seam closer: +75 EUR The machine complies with CE regulations and comes with a 12-month warranty. Delivery: weekly Shipping: 500 EUR We look forward to your enquiry! Invoices issued with 0% VAT for intra-community supply or plus 19% VAT as applicable.

Būklė: labai geros būklės (naudotas), CTS Temperature Test Chamber We are offering you a CTS temperature test chamber. Water-cooled Model series: T-40/600 Includes metal struts for increased floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Gedsygup Sspfx Ab Sjtw Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 Important information for your safety as the buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and details subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Būklė: geras (naudotas), Technical data for the pallet racking system: Racking system: Arestant Type: AS Setup data: Number of rack rows: 01 pc. Length per rack row: 19,575 mm Number of bays per rack row: 07 pcs. Number of levels incl. ground level: 02 pcs. Volume data: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 63 pcs. Total pallet spaces: 63 pcs. based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n/a Max. pallet weight: n/a Scope of delivery: 08x pallet rack frames, used Gtsdsw Ud U Hspfx Ab Sew Material color: blue Frame type: 878 Profile dimensions: 80 x 77 x 1.8 mm Incl. horizontal and diagonal struts, base plates The frames are pre-assembled (bolted truss design) 4,000 mm high 1,100 mm deep 28x pallet rack beams, used Material color: orange Box profile: 120 x 50 mm Bracket: 4 hooks Clear span: 2,705 mm 56x locking pins, used Material color: sendzimir galvanized For securing the crossbeams against unintentional lifting 32x wedge anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 16x levelling plates, used Design: fully galvanized For leveling rack frames installed on uneven floors 01x load sign with information on bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply. These costs can be provided upon request, depending on the delivery location and scope.

Būklė: naujas, Technical data for shelving unit: Shelving system: META Type: CLIP Technical setup data: Number of shelving rows: 01 pc Shelf length: 4,100 mm Number of bays per shelving row: 03 pcs Number of mesh shelves: 05 pcs per bay Scope of delivery includes: 04x Upright frames, new Material finish: Sendzimir galvanized Frame profile: 50 x 40 x 1 mm Adjustment pitch: 25|25 mm Incl. base plates, end caps, and reinforcing strut The frames are pre-assembled 2,000 mm high 835 mm deep 15x Mesh shelf, new Material finish: Sendzimir galvanized Total width: approx. 1,300 mm Total depth: approx. 800 mm Frame profile: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Crossbars (03 pcs): 750 x 18 mm Weight/pc: approx. 6.62 kg Max. load per shelf: 200 kg, evenly distributed load 08x Shims, new Dimensions: 76 x 58 x 2 mm Weight/pc: 0.064 kg Material finish: Sendzimir galvanized 60x Shelf brackets, new Weight/pc: approx. 0.014 kg Gsdjxd T Exspfx Ab Sstw Material finish: Sendzimir galvanized 03x Cross braces, new Material finish: Sendzimir galvanized 01x Load sign With specifications for bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Delivery or shipping of this item is subject to additional costs, which can be provided upon request, depending on the delivery location and scope.

Būklė: geras (naudotas), The scope of delivery includes: 01x Workbench, used Dimensions of system base: approx. 1,340 x 700 mm Height to top edge of worktop: approx. 938 mm Dimensions of worktop: approx. 1,400 x 1,000 mm Material thickness: approx. 38 mm Comprising PER EACH: 02 x Workbench stands, used Manufacturer: Dexion Type: P 90 Material finish: sendzimir-galvanised Profile dimensions: 100 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled (bolted truss) 900 mm high 700 mm deep 04 x Workbench beams, used Racking system: Dexion Type: Speedlock P90 Material finish: sendzimir-galvanised Box profile: 89 x 50 mm Beam type: SLO089|2 Clear span: 1,140 mm 08 x Dexion safety pins, used Type: Speedlock P90 Material finish: sendzimir-galvanised Head Ø: 13.58 mm Pin Ø: 5.92 mm Gedjx Itdlopfx Ab Sjtw Weight / each: 0.018 kg Chipboard panels, second grade, used Thickness: 38 mm Dimensions: 01x 1,400 x 1,000 mm 01x 1,120 x 700 mm Surface: possibly coated (single section) 08 x Wing-head countersunk screws, new Size: 6.3 x 70 mm Note: - Workbenches are shipped unassembled; - Workbench stands are pre-assembled; - Usual production time is approx. 3 - 5 working days. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the article: This item is offered for collection only. Any requested transport or shipping of this item will incur additional costs, which can be quoted separately depending on delivery location and/or scope of delivery.

Būklė: geras (naudotas), Technical data for the shelving rack: Shelving system: META Type: CLIP Technical data for configuration: Number of rack rows: 01 pc. Rack length: 3,200 mm Number of bays per row: 03 pcs. Number of shelves: 06 pcs. per bay Godpfsxfi Ncsx Ab Setw Scope of delivery includes: 04x rack uprights, used Material colour: blue Frame profile dimensions: 50 x 40 x 1 mm Adjustment pitch: 25|25 mm including base plates and wall strut Uprights are pre-assembled 2,490 mm high 435 mm deep 18x shelves, used Shelf designation: V100 Material colour: cream white Dimensions: 1,000 x 400 x 40 mm Weight: 2.78 kg/pc. Max. load per shelf: 100 kg with evenly distributed load 08x leveling plates, used Dim.: 76 x 58 x 2 mm Weight/pc: 0.064 kg Material colour: sendzimir galvanized 72x shelf supports, used Weight/pc: approx. 0.014 kg Material colour: sendzimir galvanized 06x cross braces, used Material colour: sendzimir galvanized 01x load sign with information on bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is offered for collection only. Any requested transport or shipment of this item is subject to additional charges, which can be provided on request depending on delivery location and scope of delivery.

Būklė: naujas, Technical Data for the Shelf Rack: Racking System: META Type: CLIP Installation Specifications: Number of Rack Rows: 01 unit Rack Length: 1,100 mm Number of Bays per Rack Row: 01 unit Number of Mesh Decks: 05 units Scope of Delivery Includes: 02x Upright Frames, new Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 40 x 1 mm Adjustment pitch: 25|25 mm incl. base plates, end caps, and partition struts The uprights are preassembled 2,000 mm high 535 mm deep 05x Mesh Deck, new Material finish: Sendzimir galvanized Total width: approx. 1,000 mm Total depth: approx. 500 mm Frame profile dimensions: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Cross supports (03 pieces): 450 x 18 mm Weight per unit: approx. 3.88 kg Max. load per level: 200 kg, with evenly distributed load 04x Levelling Plates, new Dim.: 76 x 58 x 2 mm Weight per unit: 0.064 kg Material finish: Sendzimir galvanized 20x Shelf Supports, new Weight per unit: approx. 0.014 kg Material finish: Sendzimir galvanized 01x Cross Bracing, new Material finish: Sendzimir galvanized 01x Load Sign With specifications for bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Gedpjxdkhqjfx Ab Sjtw Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only available for collection. Any additional delivery or shipment of this item will incur extra costs, which can be requested from us depending on the destination and scope of delivery.

Būklė: naujas, Included in delivery: 01x Lattice girder strut, new Manufacturer: Stow Material color: sendzimir galvanized Gjdpfsta Ak Sjx Ab Sstw Profile dimensions: C: 35 x 25 x 7.5 mm Length: approx. 1,154 mm Center-to-center hole: approx. 1,112 mm Drill hole diameter: approx. 10 mm Weight: approx. 1.20 kg per piece Currently in stock: approx. 600 pcs Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is desired, additional costs will apply, which can be requested from us separately depending on the delivery location and scope.

Būklė: naujas, Included in the scope of delivery: 01x Lattice girder strut, new Manufacturer: Stow Material finish: Sendzimir galvanized Profile dimensions: C: 35 x 25 x 7.5 mm Length: approx. 1,287 mm Center-to-center hole distance: approx. 1,245 mm Ø borehole: approx. 10 mm Weight: approx. 1.37 kg | piece Currently in stock: approx. 566 pcs Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Gsdpfx Absta H Snj Setw Mr. Falk Deutsch General information about the item: This item is only available for collection. Any transport or shipping beyond this must be arranged separately and will incur additional costs, which can be requested from us, depending on delivery location and scope.

Būklė: geras (naudotas), Technical Data for Shelving Unit: Racking System: META Type: CLIP Set-up Specifications: Number of Racking Rows: 01 unit Rack Length: 2,150 mm Number of Bays per Row: 01 unit Number of Shelves per Bay: 06 units Scope of Delivery: 03x Upright Frames, used Color: blue Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm including base plates and strut Upright frames are pre-assembled Height: 2,490 mm Depth: 635 mm 12x Shelves, used Type: V100 Color: cream white Dimensions: 1,000 x 600 x 40 mm Weight: 4.04 kg/unit Maximum load per shelf: 100 kg with evenly distributed load 06x Levelling Plates, used Dimensions: 76 x 58 x 2 mm Weight/unit: 0.064 kg Color: sendzimir galvanized 48x Shelf Supports, used Gjdpfxsxfkqzs Ab Sstw Weight/unit: approx. 0.014 kg Color: sendzimir galvanized 04x Cross Braces, used Color: sendzimir galvanized 01x Load Sign includes bay and shelf load data, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your Contacts at Our Company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. Any requested transport or shipping of this item is subject to additional costs, which can be provided separately depending on destination and volume.

Būklė: geras (naudotas), Technical data for the shelving unit: Shelf system: SSI Schäfer Type: R 3000 Technical data for the setup: Number of shelf rows: 01 pc. Shelf length: 1,357 mm Number of bays per shelf row: 01 pc. Scope of delivery includes: 02x Upright frames, used Gtjdpfx Aowvpwqsb Ssw Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm Including bracing struts and base plates The upright frames are pre-assembled 2,278 mm high 800 mm deep 05x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,282 x 800 x 40 mm Weight | per piece: approx. 12.82 kg 01x Cross brace, used Designation: KV31313 Material finish: Sendzimir galvanized Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only offered for collection. Transportation or shipping beyond this is subject to additional charges, which can be quoted separately depending on the place of delivery and scope.

Būklė: geras (naudotas), Workbench width: 2,860 mm / Height: 900 mm / Workbench depth: 800 mm We offer you here a used workbench frame from the manufacturer Vogelsang for sale. Technical data for the workbench frame: Manufacturer: Vogelsang Type: NS Included in the scope of delivery: 02x Workbench legs, new Material color: sendzimir galvanized Gtedpfxjhm Sr Ds Ab Ssw Leg height: 900 mm Leg depth: 800 mm Incl. cross and diagonal struts, base plates The legs are pre-assembled (bolted truss construction) 04x Workbench beams, used Material color: orange Box profile: 110 x 50 mm Clear span: 2,700 mm 08x Safety pins, used Design: fully galvanized The pictures are for illustration purposes only. The material color may vary. - The workbenches are picked unassembled; - The workbench legs are pre-assembled; - Standard production time is approx. 3 - 5 working days.

Būklė: geras (naudotas), Included in the scope of delivery: 01x Truss strut, used Manufacturer: Mecalux Material color: blue Length: approx. 1,057 mm Distance center-to-center of borehole: approx. 997 mm Borehole diameter: approx. 10.5 mm Cross-section: C 40x25x8 mm Weight: 1.150 kg | each Gjdpfx Aei Dxxlsb Setw General information about the item: This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested from us separately depending on the delivery location and the scope of delivery.

Būklė: geras (naudotas), Technical data for shelving unit: Shelving system: META Type: CLIP Technical data of the setup: Number of shelving rows: 01 pcs. Shelf length: 2,150 mm Number of sections per shelving row: 02 pcs. Gsdexfh Siopfx Ab Sjtw Number of shelves: 06 pcs. per section Scope of delivery includes: 03x shelf uprights, used Material color: blue Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm Including foot plates and dividing strut The uprights are pre-assembled 2,490 mm high 435 mm deep 12x shelves, used Shelf designation: V100 Material color: cream white Dimensions: 1,000 x 400 x 40 mm Weight: 2.78 kg each Max. load per shelf 100 kg with evenly distributed load 06x leveling plates, used Dimensions: 76 x 58 x 2 mm Weight each: 0.064 kg Material color: sendzimir galvanized 48x shelf supports, used Weight each: approx. 0.014 kg Material color: sendzimir galvanized 04x cross brace, used Material color: sendzimir galvanized 01x load capacity sign with information on bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Any transport or shipment of this item beyond this is subject to additional costs, which may be quoted separately depending on the place of delivery or scope of delivery.

Būklė: geras (naudotas), Technical data for the shelf rack: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rack rows: 01 pc. Gtodpfx Abjttg Erj Sjw Rack length: 1,056 mm Number of bays per rack row: 01 pc. Scope of delivery includes: 02x Rack uprights, used Material finish: Sendzimir galvanized Frame profile dimension: 31 x 60 mm Incl. bracing struts and base plates The uprights are pre-assembled Height: 2,280 mm Depth: 300 mm 05x Wooden chipboard shelves, used Chipboard width: approx. 985 mm Chipboard depth: 217 mm Material thickness: 22 mm 10x Beam, 2nd choice (new) Type: KTRZ 31036 Material finish: Sendzimir galvanized Z-profile: 60 x 40 x 12 mm Clear bay width: approx. 994 mm Hole pitch: approx. 53 mm Bracket: 3 HK (hooks) Weight | per pc.: 1.700 kg Max. load per pair of beams: 300 kg with evenly distributed load 10x Beam support, used Material finish: Sendzimir galvanized Dimensions: approx. 40 x 35 mm (W x H) Material thickness: approx. 1.50 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any further transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Būklė: naudotas, Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical Data for the Workbench: Manufacturer: Dexion Type: P 90 Included in delivery: 02x Workbench uprights, used Material color: green Upright height: 900 mm Upright depth: 600 mm Includes cross and diagonal struts, base plates Uprights are pre-assembled (bolted truss construction) 04x Workbench beams, used Material color: orange Beam profile: I: 120 x 50 mm Clear span: 3,000 mm 08x Safety pins, used Finish: galvanised using the Sendzimir process For securing the long beams against unintentional lifting 01x Chipboard panel, second choice, used Chipboard thickness: 38 mm Chipboard width: 3,200 mm Chipboard depth: 600 mm Surface: possibly coated (possibly two-piece) 01x Chipboard panel, second choice, used Chipboard thickness: 38 mm Chipboard width: 2,980 mm Chipboard depth: 600 mm Surface: possibly coated (possibly two-piece) Gtedpfx Asthfddsb Sow 06x Self-tapping screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 08x Z-brackets, used For securing/inserting chipboard panels Zinc-plated surface Notes: - The pictures serve to illustrate the materials. - Material color may vary. - Workbench frames are picked unassembled; - Workbench uprights are pre-assembled; - Production time is generally approx. 3–5 working days. You can also purchase the workbenches from us in the following alternative depths: Workbench 3,200 x 700 mm / 2 levels / (€271.00 incl. 19% VAT) Workbench 3,200 x 800 mm / 2 levels / (€282.00 incl. 19% VAT) Workbench 3,200 x 900 mm / 2 levels / (€293.00 incl. 19% VAT) Workbench 3,200 x 1,000 mm / 2 levels / (€304.00 incl. 19% VAT) Workbench 3,200 x 1,050 mm / 2 levels / (€309.00 incl. 19% VAT) Workbench 3,200 x 1,100 mm / 2 levels / (€315.00 incl. 19% VAT) Workbench 3,200 x 1,200 mm / 2 levels / (€325.00 incl. 19% VAT) Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding this item: This item is offered for collection only. If you require transport or shipping beyond this, additional costs will apply, which can be quoted separately depending on delivery location and scope.