Frezos

Casadei MATRIX 4+1

FOUR-SIDED MOULDER, 4 SPINDLES + UNIVERSAL SPINDLE, 2.5M TABLE & HEAVY-DUTY MOTORS
Brand: CASADEI Model: MATRIX 4+1
Nodpfx Afou Sr Ivjajcu
Serial Number: 02-84-022 Year: 2002

WORKING CAPACITIES (thickness x width): 6 to 155 x 25 to 230 mm
- Four-sided planer and moulder
- Working width: 25 to 230 mm
- Working height (wood thickness): 6 to 155 mm
- Maximum finished wood section: 155 x 230 mm
- Minimum working length: 480 mm
- Adjustable cutting depth max: 10 mm
- Spindle speed: 6000 rpm

MOULDER CONFIGURATION:
- Sturdy welded steel frame
- Soundproof panoramic hood on gas struts
- Raised control panel, operator side
- Steel infeed table 2500 x 250 mm
Floor height: 880 mm
Spring-loaded lateral infeed pusher
Manual lubrication unit for the table after planing
1) Bottom horizontal spindle 5.5 kW
TERSA cutterhead Ø 125 x h.240 mm
1 retractable vertical pressure roller
2 & 3) Vertical spindles (right then left) 1 x 7.5 kW each
TERSA cutterheads Ø 125 x h.165 mm
4) Top horizontal spindle 7.5 kW
TERSA cutterhead Ø 125 x h.240 mm
- Adjustable pressure shoe at output
5) Universal spindle 7.5 kW
Ø 40 x 255 mm
1 retractable horizontal pressure roller

FEED SYSTEM:
- Variable feed speed: 5 to 25 m/min
Feed motor: 1.1 kW (1.5 HP)
- 8 independent pneumatically-pressured feed rollers:
2+2 grooved steel, then 2+2 rubber-coated

OTHER FEATURES:
- CE marked
- Main power supply: 380 V, 3-phase, 50 Hz
- Lockable main switch, automatic star-delta starters
Emergency stop front/rear
- Installed power: 37 kW (50 HP) IN 62A
- Braked motors
- Spindle drive by cardan shafts
- Digital indicators (Siko-type counters) for precise manual adjustment of each operation
- Electric raise/lower of the beam for thickness adjustment
Raise/lower motor: 0.37 kW
- Axial adjustment of spindles:
Bottom horizontal: 0 to 15 mm
Top horizontal: 0 to 25 mm
Verticals: 0 to 25 mm
- Acceptable tool dimensions:
On bottom horizontal spindle: Ø 120 to 140 mm
On vertical spindles: Ø 100 to 180 mm
On top horizontal spindle: Ø 100 to 180 mm
End cutterhead: Ø140x12x40 mm
- Recommended pneumatic supply: 7 bar
Working pressure: 6 bar
Average consumption: 0.85 Nl/cycle
Connection: 1/2" G
- Centralized upper extraction port: Ø 250 mm
Required air speed: 25 m/sec minimum, Flowrate: 4500 m³/h
- Technical manual included.
- Machine equipped with 4 TERSA spindles
Overall dimensions: 4700 x 1700 x h.1800 mm
Weight: 2240 kg
Contact us for consumables, accessories, and/or dust extraction systems.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.