Universalios Staklės pirkti naudotą (48 398)

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in the field of Kellenberger overhaul/retrofit, we not only offer machines delivered in as-new condition and with warranty, but can also provide comprehensive service for your machines, fully refurbished to metric standards and newly painted. Version R: Machine features central lubrication and roller guideways in the X-axis flat way as well as air lift in the grinding headstock. -Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional equipment at extra cost: - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in centre height to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. Gsdpfx Aced Ih D Njueuh At this time, the machine tool does not comply with the fundamental safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum protection level must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivels: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – between centres: 130 kg incl. clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Gjdpfxjd Ih D Ro Acusuh Space requirements approx.: 3.1 x 2.0 m Machine completely overhauled according to Kellenberger standards. - Workpiece spindle drive utilises modern three-phase technology - 2-axis digital readout. X-axis resolution: 0.5 µm Optional extras (available at additional cost): - Rotary encoder with digital display on workpiece headstock - Rotary encoder with digital display on grinding headstock (not compatible with height adjustment via spindle) - New, robust internal grinding device, diameter 80 mm or 100 mm, with height adjustment - Centre height increase up to max. 225 mm - Variable speed control for grinding spindle Included accessories: - Operating tools - Collet tube for chuck Further accessories available on request.

Sąlyga: naudotas, Grinding diameter: 450 mm Grinding length: 1000 mm Centre height: 225 mm As a globally leading company in Kellenberger overhauls and retrofits, we are not only capable of delivering machines in like-new quality with warranty, but can also provide ongoing service for your equipment. Machines are overhauled and delivered in accordance with the manufacturer’s standards. Photos shown are of previously delivered machines with additional options. Mechanical overhaul: - Complete overhaul of the entire machine per Kellenberger inspection protocol - New, maintenance-friendly enclosure - Newly painted Electrical overhaul: - New, state-of-the-art CNC cylindrical grinding machine control system - Completely refitted control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute encoder (for B-axis) Gedpfeuwv Hyex Acusuh Photos of previously delivered machines with alternative configurations are available. Grinding head variant UR/RS: - Wheel arrangement for external and angular plunge grinding, wheels mounted in tandem - Enables use of 400 mm diameter grinding wheels for each operation - Significantly reduced risk of collision - Simplified programming - Wheel specification: 400×63×127 mm (each) - Provision for operating a high-frequency spindle - Spindle available as optional extra - CNC-controlled B-axis for flexible external, face, and internal grinding in a single setup - Swivel range: +10° / -270° - C-axis for polygon grinding available as optional extra - Lower base fixed - Grinding head motor: 10.0 kW - Tailstock - Marposs measurement system for wheel profiling - Marposs longitudinal positioning system

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 1000 mm Center height 175 mm Space requirement approx. 3.6/3.5 m As the world’s leading company in Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new quality with warranty, but can also offer ongoing service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, state-of-the-art CNC cylindrical grinding machine control featuring the BEMA grinding interface - Completely rebuilt control cabinet - New drive technology - Replacement of all electrical cabling, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B axis) Standard Equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper, optionally with fine adjustment - Grinding spindle headstocks T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - B axis high-resolution - Marposs measuring system for grinding wheel measurement - Longitudinal positioning with Marposs - GAP control (sensor on grinding spindle headstock), ELASO integrated into control interface - Semi-automatic balancing by ELASO integrated into control interface - BEMAT grinding wheel measurement Options at Extra Cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle headstock - Measuring control - Extraction unit Gusdpfsuwv H Tex Acueh - Paper band filter Control Functions: Basic Grinding Cycles - Zeroing the workpiece with Z-pos (longitudinal positioning) - Grinding wheel measurement with BEMAT - Touch sensor GAP - Measuring dressing diamonds - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (B-axis swiveling, dressing with straight wheel) - External and internal radius grinding (radius dressed onto wheel) Optional Grinding Cycles - External and internal profile plunge grinding with profile wheel - External and internal profile grinding with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Out-of-round grinding external and internal 15,000

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Gjdpfeuxft Eex Acujuh Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Gamybos metai: 1987, Grinding diameter 200 mm Grinding length 400 mm Centre height 100 mm Geometrically overhauled and newly painted With internal grinding attachment Gedpfx Aevw Duuocusuh Accessories available on request

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/ø Continuous infeed: 0–0.95 mm/ø Table swivelling: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Guodpfxod Ih D Hs Acujh Photo shows identical machine, centre height 225 mm Version R: Machine equipped with central lubrication, roller guides on the X-axis flat bed, and pneumatic lift-off for the grinding headstock. - Digital readout in 2 axes. X-axis resolution 0.5 µm Options: - Rotary encoder with digital display on the workpiece headstock - Rotary encoder with digital display on grinding headstock (no height adjustment via spindle possible) - New rigid internal grinding attachment diameter 80 mm or 100 mm, with height adjustment - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine tool does not currently comply with the essential health and safety requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The required minimum safety objective must be determined by means of a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -T6: internal grinding attachment -T7: internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP control on T1 and T2 by ELASO (contactless), integrated into the control interface -GAP control on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock, hydraulic with fine adjustment +/-150 µm -Dressing device on the lower table, workpiece spindle side -Dressing device on the lower table, tailstock side -Dressing device on the upper table -New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece headstock with direct drive *highly recommended for non-circular grinding *max. workpiece weight, between centers: 150 kg *max. workpiece weight, overhung: 75 kg *water-cooled *Morse taper 5 combined with short taper mount to DIN 55026 *spindle orientation stop *fixed lower section B-axis with direct drive, center height 225 mm *extremely torsion-resistant *high positional accuracy *resolution ° *water-cooled MECHANICAL OVERHAUL: - Complete machine overhauled according to Kellenberger measurement protocol - New paintwork New hydraulic unit: - Improved temperature control (oil cooler) - Energy-saving: only one pump, and not running continuously! - Pressure monitoring - Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X axis - Wear-free, since no contact during operation - No loss of accuracy, even during prolonged operation under full load at maximum speed - Friction-free at low speeds - No reversal jump of friction force when changing direction - Transmits smallest rotational movements - No stick-slip effect even at low speeds - No fluctuation in friction torque due to recirculating balls - Higher axial stiffness than ball screw drives - Significantly better damping, leading to improved workpiece surface and longer tool life - No vibrations due to recirculating balls - Also suitable for high speeds and accelerations - Cost-effective alternative to linear motors, offering higher accuracy and much less heating - Much lower power loss and thus no swarf issues on permanent magnets - Much lower cooling requirements compared to linear motors ELECTRICAL OVERHAUL: -New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface -Newly constructed control cabinet -New drive technology -Replacement of all electrical wiring (Berus pressure switches etc.) -New absolute glass scales in X and Z -New absolute encoder (for B-Axis) CONTROL SYSTEM: The grinding software consists of a base license and various options, depending on the machine configuration. Software base functions: - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece... Gusdpjuxfu Nofx Acujh

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m As a world-leading company for Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality and with warranty, but can also offer you comprehensive service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical cabling, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute encoder (for B axis) Gjdpfxeuwv H Hj Acujuh Standard Equipment: - Workhead with MK5 taper, optionally with MK5/short taper adapter - Tailstock with MK4 taper. Optionally with fine adjustment - Grinding spindle stock T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing by ELASO integrated into control interface - BEMAT grinding wheel measurement Optional at extra cost: - HF internal grinding spindle - Ultra-precise, highly torsion-resistant workpiece spindle - Measuring control - Extraction unit - Paper band filter Control: Basic Grinding Cycles - Workpiece zeroing with Z-position (longitudinal positioning) - Wheel measurement with BEMAT - Approach sensor GAP - Measurement of dressing diamonds - Corrections - External and internal cylindrical grinding (traverse and plunge grinding) - External and internal taper grinding (B axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional Grinding Cycles - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Godsuxftrepfx Acusuh Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding head swiveling: 180° ± Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed in steps: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Longitudinal table travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. (between centres, including clamping): 130 kg Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guideline Including new, modern and future-proof control system. Photo shown: Example of an already delivered machine with special options -The operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original controller, so no retraining is required. -Diagnostics function with display of PLC notifications and digital I/Os -Dressing function can be expanded or modified on request. -Spindle positioning of the workpiece spindle available on request. -New maximum infeed: 40 mm, can be extended on request. -Digital readout on 2 axes. X-axis resolution: 0.5µm Options: -Encoder with digital readout on workpiece headstock -Encoder with digital readout on grinding headstock (no height adjustment possible with spindle) -New robust internal grinding device, Ø80 mm or Ø100 mm -Increase of centre height up to 225 mm -Spindle speed control for grinding spindle Included: -Operating tools -Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid table traverse. Versatile application possibilities in production for external and internal grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Gauging control The machine currently does not comply with the basic health and safety requirements as specified in BetrSichV 2015. The required minimum safety target must be determined by a risk assessment according to BetrSichV.

Sąlyga: naudotas, Gamybos metai: 2005, Grinding diameter: 500 mm Grinding length: 1500 mm Center height: 250 mm Control system: GRINDplusIT Machine is partially overhauled with measurement protocol and warranty Delivery within Germany and neighboring countries. 1 UR-RS 175 / 1500 Standard version (T1, T2, T5, T7) 1 Grinding wheel assembly T1 400x63x127mm 1 Grinding wheel assembly T2 400x63x127mm 1 Grinding wheel assembly T5 400x63x127mm 1 Internal grinding attachment T7 0120mm for HF spindles 1 Center height 250mm 2 Grinding head motor: drive power 10.0kW 1 CNC control Heidenhain GRINDplusIT 1 Kel-ASSIST 100 PLUS (includes Kel-Assist 100 and thread calculation) 1 KEL-POLY, non-circular grinding 1 KEL-NET for CNC control GRINDplusIT 1 B-AXIS GRINDplusIT: "CNC-controlled B-axis" (standard) 1 GRINDplusIT: constant speed 35 m/s or 45 m/s_adjustment of grinding spindle via control 1 T1, T2, T5, T7: T1 and T2: constant speed, T5: variable speed (Danfoss), T7: HF spindle 1 Operating unit for 1x MFM or MFV spindles, VACON 22kW 1 x HF internal grinding spindle Fischer MFM 1224/42/31 right HJND 21 1 x HF internal grinding spindle Fischer MFV 1260/4 right 1 x HF internal grinding spindle IBAG HF 33 S 60 P 1 Tailstock with manual retraction 1 MICRO ADJUSTMENT: Tailstock base with micro adjustment 1 Spring-loaded quill insert 1 Pneumatic relief for the tailstock 1 Upper table flooding (standard) 1 Reinforced workpiece spindle head MK 5 DIN 55026 size 5" 1 C-AXIS: CNC-controlled C-axis for reinforced workpiece spindle head 1 Fixed base for reinforced workpiece spindle head 1 KELPOS: Active longitudinal positioning MOVOMATIC, mounted on the grinding head 1 Diameter gauge Movomatic DU200 1 Measuring control unit Movomatic ES124 / digital 1 KELSET: Tool measuring system KELSET, MARPOSS 1 Base module for KEL-TOUCH touch sensor and KEL-BALANCE balancing system 1 KEL-TOUCH, touch sensor for diagonal/tandem 1 Full enclosure emulsion 1 Coolant cleaning gun connected to the table 1 Grinding mist extraction system emulsion 1 Lubricant for initial fill Gusdpfx Acewulrhoujh HF dressing device type IBAG on OT Data refer to as-delivered condition, without guarantee.

Sąlyga: naudotas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Center height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180 ± ° Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg (including clamping) Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhaul/retrofit, we not only deliver machines in as-new quality with warranty, but also provide service for your machines, metrically overhauled and freshly painted. Gsdpfx Acod Ih D Eeujuh Photo shows a machine already delivered, possibly with different options. Machine is equipped standard with central lubrication and roller guides in the X-axis flatway, as well as air lift-off in the grinding headstock. BEMA Standard Equipment: - Digital readout in 2 axes. X-axis resolution: 0.5 μm - Grinding spindle speed display - Infinitely variable grinding spindle speed 70–100% - Infinitely variable internal grinding spindle speed 70–100% - Workpiece spindle drive powered by three-phase motor, infinitely variable via frequency converter Available options at extra cost: - Encoder with digital display in workpiece headstock - Encoder with digital display in grinding headstock (height adjustment via spindle not possible) - Sine bar - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase center height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid in neighboring countries only). Further accessories on request. The machine tool does not currently comply with the essential health and safety requirements as set out in BetrSichV 2015. An assessment of the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. cantilevered workpiece weight: 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines in as-new condition and with warranty, but can also provide service for your machines, including recently delivered machines, with additional options such as: - Splash guard doors - X-axis enclosure Godpfxsuxftxo Acueuh - Grinding headstock swivel angle display Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guides in the flat bed of the X-axis as well as pneumatic lift-off in the grinding headstock as standard. - Digital readout in 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Increased centre height up to a maximum of 225 mm - Variable speed control for the grinding spindle Includes: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently comply with the basic safety and protection requirements as specified in the 2015 Industrial Safety Regulation (BetrSichV). The necessary minimum safety objectives must be determined by means of a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible Gujdpfx Ast Ii Rrocush The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter: 250 mm Grinding length: 400 mm Centre height: 125 mm Control system: Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings - New X-axis spindle - Upper table re-ground Gjdpovx Dvuefx Acusuh - New table geometry - New geometry between WSS and grinding spindles B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle GAP control Paper band filter

Sąlyga: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm The machine was overhauled according to the Kellenberger inspection protocol and newly repainted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means the machine also received a completely new electrical system as part of this upgrade. Machine equipped with a reinforced workpiece spindle head for chuck grinding of heavy workpieces. Currently, the machine does not meet the fundamental safety and protection requirements specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). Gujdpfx Aevq R Uzjcuoh Raising the required minimum safety standard must be determined by means of a risk assessment according to BetrSichV.

Sąlyga: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Gjdpfx Asv Dxxzscueuh Machine equipped with reinforced workpiece headstock for unsupported grinding of heavy workpieces. The machine will undergo a major service/partial overhaul including a geometry inspection report in accordance with Kellenberger new machine standards. The machine tool currently does not meet the essential safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The necessary minimum safety objectives must be determined in the course of a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Gamybos metai: 2010, Grinding diameter 350 mm Grinding length 1000 mm Gsdpsvdk N Eofx Acujuh Centre height 175 mm Control unit: Fanuc 310is Completely mechanically overhauled. Includes grinding process setup and tooling for one part. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control: GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel configuration left: 500 x 80 mm Grinding wheel configuration right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swiveling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle headstock for internal and external grinding Preparation for measuring control systems Movomatic ESZ 400 or Marposs P7 ME Preparation for external filtration unit Coolant cut-off for table devices Fully enclosed emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: probe C25 Hydraulic preinstallation for Arobo steady rest

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK 5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel: 360° Grinding headstock swivel: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (overhung): 130 kg incl. clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Floor space approx.: 4.2 x 2.0 m Available immediately, naturally with 12 months warranty! Geometrically overhauled and newly painted with new electrics, in KELLENBERGER quality! - Digital readout on 2 axes. X-axis resolution: 0.5 µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Further accessories available on request. At this time, the machine tool does not comply with the fundamental health and safety requirements as stipulated in BetrSichV 2015. Gujdpfx Acjv I Eq Soujh An increase to the required minimum safety target must be determined by means of a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Gamybos metai: 1978, Grinding diameter: 500 mm Grinding length: 500 mm Centre height: 250 mm The URF model is designed for both single-piece and series production of highly precise workpieces clamped in a chuck, on a faceplate, or on a magnetic chuck, with a maximum load capacity of 330 Nm including clamping devices. This machine type is characterized by its compact and robust construction, ease of operation, and high versatility, as well as short changeover times for external, face, and internal grinding processes. Fields of application: - Toolmaking - Mould making - Gauge manufacturing External grinding wheel diameter: 400 mm Face grinding wheel diameter: 225 mm Internal grinding device for spindle diameters of 70 mm; 80 mm available upon request. The machine has been completely overhauled: - New control cabinet Gedpfevx Dvnox Acusuh - Modern hydraulic unit - Reinforced workpiece spindle head (see photo) - 2-axis digital readout by Fagor - Sine bar for precise adjustment of the swivel angle Photos show current overhaul status. Delivery time: approx. 3 weeks from order.

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: Gujdpfx Aouxfucscujh - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Sąlyga: naudotas, Gamybos metai: 2006, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Machine weight approx. 3.5 t Machine fully overhauled in BEMA style with 12 months warranty Mechanically and visually as new Guedst Ii Nbspfx Acueh Photo shows a freshly completed machine with some different options. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/planar grinding - B-axis automatic 1° Hirth toothing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount 400mm diameter - Right grinding wheel mount 300mm diameter - Internal grinding attachment with belt drive - Tailstock with micrometric adjustment - Fine adjustment of upper table - Paper band filter SBP4 240l

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Plunge feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a worldwide leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver these machines in like-new condition with warranty, but also provide service for your machines. Machine geometry overhauled and newly painted, with original electrics. Gusdst Ii Nuopfx Acuoh Photo shows a recently delivered 600U. - Digital readout in 2 axes, x-axis resolution 0.5 μm Options: - Rotary encoder with digital readout in the workpiece spindle headstock - Rotary encoder with digital readout in the grinding spindle headstock (no height adjustment possible with spindle) - New stable internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height can be increased up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not comply with the essential safety and protection requirements as stipulated in the German Industrial Safety Ordinance (BetrSichV 2015). Compliance with the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: Gusdpfjuxfupex Acuoh - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Sąlyga: naudotas, Gamybos metai: 1987, Grinding diameter: 350 mm Grinding length: 650 mm Gedemmmtfspfx Acujuh Centre height: 175 mm Top-condition machine from the prototype construction of a defence contractor Despite its excellent condition, the machine was completely dismantled down to the base, cleaned, all seals and wear parts replaced, upper table re-ground, and geometry restored to as-new machine tolerances. - 7,072 operating hours - Retrofitted in 2013 with a KSS band filter system, capacity 300 L, manufacturer: Knoll - Measurement control system - Includes extensive machine accessories, e.g. adapters, flanges, collet set, Movomatik measuring head, etc. - As-new paper band filter from 2014, but practically unused