Tinklas Mortiser pirkti naudotą (231)

Sąlyga: paruoštas naudoti (naudotas), Technical characteristics Pneumatic table feed per side: 4 adjustable upper mortising heads, 3 rear horizontal heads including 1 adjustable Table dimensions: 1000 x 200 mm Number of mortising heads: 14 Mortising features: Tilting table Iedpfxot Dgc Ds Af Ioal Mortising: Spindle Power and motors Overall dimensions

Sąlyga: naujas, Centauro BETA 3-Achs CNC Schwenkmeißel- Stemmmaschine Neue, voll programmierbare, horizontal arbeitende 3-Achs CNC-Schwenkmeißel-Stemmmaschine, geeignet für allgemeine Tischlereianwendungen und die Möbelproduktion. Durch die automatische Bewegung des Stemmkopfes in der X-Achse und einen automatischen Greifer zur Positionierung des Werkstücks ist kein manuelles Verschieben oder Handling erforderlich, abgesehen vom Einlegen des Holzes, dem Andrücken an den pneumatischen Referenzanschlag und dem Entladen nach abgeschlossenem Bearbeitungszyklus. Der gesamte Bewegungs-, Spann- und Stemmzyklus läuft vollautomatisch ab. Die Bewegungen in X-, Y- und Z-Achse erfolgen präzise über Kugelumlaufspindeln und Linearführungen für maximale Positioniergenauigkeit. Dank programmierbarer Z-Achse sind auch seitliche Zapfenlöcher, Doppelzapfen oder breitere Zapfenlöcher mit demselben Meißel möglich. Die Programmierung gestaltet sich sehr einfach über den benutzerfreundlichen grafischen Touchscreen-Controller, auf dem Programme unter einer Zahl oder einem Namen (bis zu 8 Zeichen) gespeichert werden können. Der Schwenkmeißel erzeugt sehr saubere Zapfenlöcher; für tiefe Zapfen können bis zu 3 Schnittiefen als „Woodpecker“-Funktion programmiert werden. Weitere Programmoptionen: Bezug auf Sichtfläche oder Werkstückdicke, Anfertigung von spiegelbildlichen Teilen (links/rechts) innerhalb eines Programms. Optional kann die Maschine mit einem separaten, programmierbaren Langloch-Bohrkopf zum Anfertigen kleiner Öffnungen für Sprossen ausgestattet werden. Alternativ ist ein horizontaler Fräskopf für Bandtaschen, Schlitze bei Jalousietüren usw. erhältlich. X-Achse Verfahrweg: 1100 mm Y-Achse Verfahrweg: 250 mm, max. Schnitttiefe: 120 mm (abhängig vom Meißel) Z-Achse Verfahrweg: 100 mm, max. Werkstückhöhe: 120 mm Iodpfx Aob Tmpqof Ioal Alle Achsen über Kugelumlaufspindel und brushless Motor Max. Werkstückbreite: 200 mm (größer auf Anfrage) Max. Schwenkmeißel-Breite: 20 mm Min. Schlitzlänge: ca. 25 mm (mit Schwenkmeißel) Min. Schlitzbreite: 6 mm 3 vertikale pneumatische Spannzylinder 3 horizontale pneumatische Spannzylinder 4 PS Hauptmotor „Power 1000“-Touchscreen-Grafiksteuerung mit 99 Programmen à 50 Zeilen; USB-Schnittstelle Programmierbare Schnittgeschwindigkeit für die Schnitttiefe Ausreißschutz mit Druckluftblasen und Absauganschlüssen (1 x 80 mm, 1 x 60 mm) Arbeitstisch-Maße: 1210 mm x 215 mm Installierte Leistung: 3,6 kW (Standardmodell) Druckluftversorgung: 6 bar / 470 l/min Verbrauch

Sąlyga: paruoštas naudoti (naudotas), Caractéristiques techniques Mortaises carrées, à éclats, sans lubrification Course horizontale avant de 90 mm Avance pneumatique Tête inclinable Presse pneumatique Table en aluminium de 1200 mm Machine idéale pour l'ameublement et la menuiserie Mortaisage à bédane Puissance et moteurs Isdpfxsuaiiko Af Isal Dimensions hors tout

Sąlyga: naujas, Automatische Stemmmaschine mit 3 Köpfen Arbeitstischmaße: 3000 x 300 mm Gusseisenkonstruktion für maximale Stabilität 3 vertikale hydraulische Werkstückspannvorrichtungen 3 horizontale hydraulische Werkstückspannvorrichtungen Vorschubgeschwindigkeit hydraulisch einstellbar Automatischer Betrieb 3 Stemmaggregate Manuelle Verstellung auf der X-Achse mit mechanischer Arretierung Mechanische SIKO-Anzeigen für Höhenposition (Z-Achse) Iodpfon Nv Txex Af Ijal Doppelt exzentrischer Betrieb der Stemmaggregate (patentiertes Design) Motorleistung: 3 PS Drehzahl: 2800 U/min Maximaler Abstand zwischen den 2 äußeren Stemmaggregaten: 2800 mm Minimaler Abstand zwischen den 2 äußeren Stemmaggregaten: 180 mm (Mitte zu Mitte der Stemmung) Absaugstutzen: 100 mm Hydraulikpumpenmotor: 10 PS

Sąlyga: naudotas, Sicma márkájú, 3-fejes függőleges fúróberendezés Iaodpfx Afjq Tiq Eo Iel

Sąlyga: naudotas, Masina de găurit Camam model FM/2U/10A, axuri cu cap multifuncțional, second-hand. Iaodpfx Aforwrk Is Iol

Sąlyga: naudotas, Camam doppelzapfenfräsmaschine, riemengetrieben, mit 2 horizontalen und 3 vertikalen Spindeln, gebraucht Iaodpslxurmsfx Af Ijl

Sąlyga: naudotas, Mortasatrice marca Comec mod. FFM/LX, matricola 890704, dotata di cabina, carico e scarico automatici, per eseguire mortasature e forature di testiere, pedoniere di letti e articoli simili. Iodpfxem Smg Ue Af Isal

Sąlyga: naudotas, Usada máquina horizontal de mortajar doble para asientos tipo "Old America" y similares. Iasdjq Rkt Dopfx Af Iel

Sąlyga: naudotas, Doppelbohrmaschine mit jeweils 8 Spindeln pro Seite, für die Rückenlehnenholme von Stühlen im Modell „Old America“. Iajdpsq Rkt Iefx Af Isl

Sąlyga: naujas, Gamybos metai: 2025, A planer-thicknesser is a versatile woodworking machine, designed for straightening, dimensioning, and smoothing lumber. Ideal for joinery and furniture manufacturing applications, it allows for precise planing, surface finishing, edge processing, production of boards, fabrication of joinery components, and preparation of timber for gluing. The machine features a robust cast iron table, high-quality cutterhead knives for material removal, an electric motor, and adjustable settings for ease of use. Applications The CORMAK PT260 230V planer-thicknesser is the perfect solution for: - Joiners and carpentry workshops producing wooden structures, furniture components, and mouldings - Renovation and construction workshops processing raw sawn timber and laminated wood - Hobby workshops seeking an accurate thickness planer for domestic use - Schools and training centers teaching woodworking fundamentals on professional-grade equipment Standard Equipment - Cutterhead Ø75 mm with 3 knives (250 × 30 × 3 mm) - Planer table: 1100 × 250 mm - Thicknessing table: 600 × 248 mm - Adjustable aluminium fence: 700 × 150 mm (90–45°) - Anti-vibration rubber feet - Dust extraction port Ø100 mm - Operating manual (Polish) - CE Declaration of Conformity Optional Equipment - Mortising and drilling attachment - Chip and sawdust extractor - Knife setting jig - Roller support stands Upgrade your workshop with modernity, precision, and reliability—choose the CORMAK PT260 230V planer-thicknesser NEW VERSION to streamline your woodworking operations. Technical Specifications Cutterhead diameter [mm]: 75 Cutterhead speed [rpm]: 4000 Dust extraction port diameter [mm]: 100 Fence tilt angle [°]: 90–45 Number of knives: 3 Knife dimensions [mm]: 250x30x3 Planer table size [mm]: 1100x250 Thicknesser table size [mm]: 600x248 Max. planing width [mm]: 250 Max. planing thickness, surface planer [mm]: 5 Max. planing thickness, thicknesser [mm]: 2.5 Max. cutting depth, thicknesser [mm]: 3 Max. stock height, thicknesser [mm]: 180 Feed speed, thicknesser [m/min]: 6 Fence dimensions [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1100 x 250 Weight [kg]: 170 Total motor power: S1: 2.0 kW / S6: 2.6 kW Power supply: 230V Manual: Polish / English CE Declaration: Yes Manufacturer: Cormak Iedpfew H R Aiex Af Isal

Sąlyga: labai geros būklės (naudotas), Parduodamas profesionalus miško gervė Schlager & Reichart Maschinenfabrik (Marktoberdorf, Vokietija). Pilnai komplektuota, tvirta konstrukcija su PTO (galios nuėmimo veleno) pavara – paruošta darbui miške. Modelis: Tipas 5119 2R – 836. Pagaminimo metai: 1991. Traukimo jėga vidinėje linijoje: 5 tonos. Išorinėje linijoje: 3,5 tonos. Lyno skersmuo: 12 mm. Darbinis slėgis: 155 barų. Pavara: PTO velenas 540 aps./min. Konstrukcijos stipris (Bruchlast): 12,6 tonos. Tvirtas apsauginis skydas, apsauginis tinklas, reguliuojamos atramos. Pilnas mechanizmų, valdymo svertų, hidraulinių išvadų komplektas. Būklė pagal nuotraukas – įranga naudota Vokietijos komunalinių tarnybų (Stadt Gotha Gartenamt), nuolat prižiūrėta ir gerai palaikyta. Ijdpjxcaaaofx Af Isal

Sąlyga: naudotas, Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window machining center ----- For sale on behalf of customer Manufacturer’s description: Designed for the production of individual parts, components, and small series. Spindle arrangement: One crosscut saw, a single tenoning and slotting spindle, a right-hand profiling spindle, a tenoning/slotting spindle, and a profiling spindle suitable for stacking multiple tools on top of each other, with pneumatic spindle movement. Slot table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit. Height adjustment of the feed by manual control. Iaodpfjx Tu N Hsx Af Iel Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for precise frame or sash external dimensions. Control of tool positions (longitudinal and cross machining) via selector switch on the operator panel. Technical data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thicknesses IV 68 – IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Synchronised spindle ----- Pneumatically actuated forward/backward motion for tear-free profiling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool min. diameter: 112–140 mm, max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for synchronised spindle from 4 kW to 7.5 kW Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production possibilities: single pieces, double pieces, by frame, series production, profiling. Data input via keyboard with integrated user guidance and error diagnostics. 1 Groove spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial stroke: 2 positions Radial stroke: 2 positions Max. tool diameter: 130 mm Motor upgrade for groove spindle from 2.2 to 3 kW 1 hardware recessing unit, right: ----- For routing the hardware groove during profiling or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the operator panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool cutting circle: min. 140 mm, max. 180 mm Home position below table: 10 mm Hardware router in special design: Clamping length 150 mm Axial stroke 80 mm, 3 positions 3 tools Radial stroke, 2 positions Motor upgrade for hardware routing spindle from 2.2 to 3 kW Hardware routing spindle for 230 mm tool diameter in and above table Electrical height adjustment of the feed with selector switch on the operator panel for 2 timber dimensions, includ...

Sąlyga: naujas, Katalogo numeris S 0335 - Naujas įrenginys, sandėlyje - CE sertifikatas OBLANKAVIMO STAKLĖS: - Darbinio stalo matmenys: 1500 x 320 mm - Maks. apdirbimo gylis: 5 mm - Aliumininės atraminės liniuotės matmenys: 1100 x 155 mm STORIO PLANIRAVIMO STAKLĖS: - Darbinio stalo matmenys: 316 x 600 mm - Maks. apdirbimo gylis: 3 mm - Pjovimo greitis: 7 m/min - Medžiagos storis: 4–230 mm - Variklio galia: 3 kW - Frezavimo galvos apsukos: 5600 min⁻¹ - Matmenys (ilgis/plotis/aukštis): 1500/600/1050 mm - Svoris: 315 kg * Šlifuoto paviršiaus ketaus stalai, * Tiksliai reguliuojami išilginio obliavimo stalai, * Stabili aliumininė liniuotė (culaga) su reguliuojamu nuolydžiu nuo 90° iki 45°, * Frezavimo galvos apsauga, Iaedpfevw Rqijx Af Isl * Storio obliavimo stalo centrinė vedimo kolona ir laikiklis, * Įjungimas ir išjungimas be įrenginio sustabdymo, * Drožimo mechanizmas su kairine eiga. Grynasis kaina: 14500 PLN Grynasis kaina: 3440 EUR Kaina paskaičiuota pagal kursą 4,2 PLN/EUR (Kursui ženkliai svyruojant, kaina gali keistis)

Sąlyga: naudotas, Gamybos metai: 1994, Techniniai duomenys: Gamybos pajėgumas: 2 x 4,8 MW Generatorių kiekis: 2 vnt. Kuro bako talpa: 480 m³ Kuro rūšis: dujos + alyva Pilna jėgainė 2005 m. pabaigoje atlikta pilna revizija: - 2 degimo varikliai, 12 cilindrų V tipo varikliai iš Maschinenwerke Halberstadt, tipas: 12 VDG 48/42 AL, - skirti darbui su DUJOMIS ir ALYVA 2 generatoriai Leo Somer su: - elektrinė galia po 4,6 MW kiekvienam, - mechaninė galia po 4,8 MW kiekvienam (apie 6500 AG), - šiluminė galia po 4,8 MW 2 vnt. garo katilų su šilumos atgavimu: - elektros įvedimas: vidutinė įtampa 10 kV (tiesiogiai į tinklą). Iodpfx Aou Nxatsf Ieal Papildoma įranga: - šilumokaitis, katalizatorius, valdymo kambarys, vidutinės įtampos tinklas, alyvos paruošimo įrenginiai, tarpiniai ir kuro saugojimo bakai 4,8 m³

Sąlyga: naudotas, Gamybos metai: 1985, Technical details: Pressure: 3 t Throat depth: 150 mm Maximum ram stroke: 280 mm Shut height with bolster plate (ram/top): 355 mm Distance table/ram: 355 mm Bolster plate on table: 280 x 290 x 50 mm Passage opening in table: Ø 100 mm Ram speed, advance: 0.1 m/s Ram speed, return: 0.3 m/s Pin hole in ram: Ø 20 x 40 mm Height above floor: 800 mm Total power requirement: 1.5 kW Machine weight approx.: 370 kg Machine dimensions approx. LxWxH: 0.8 x 1.2 x 1.9 m Iaedpou Nfvbjfx Af Iol The single-column press is mounted on a subframe (welded sheet steel construction) Operation via footswitch The press has been retrofitted: - Mount for foil with punching device with automatic feed (pneumatic) - FIBRO punching device (plastic disc with Ø 47.5 mm for punching) - Foot control

Sąlyga: naudotas, Technical specifications: Pressure: 2.5 t Iodpfxsu Nfv Ue Af Ioal Reach: 155 mm Max. ram stroke: 280 mm Distance table/ram: 450 mm Clamping plate on table: 260 x 1000 mm Ram advance speed: 0.08 m/s Ram return speed: 0.32 m/s Ram bore: Ø 20 x 45 mm Height above floor: 930 mm Total power requirement: 1.1 kW Approx. machine weight: 500 kg Approx. machine dimensions (LxWxH): 0.85 x 1.0 x 1.7 m The machine is equipped for straightening operations.

Sąlyga: naudotas, Gamybos metai: 1982, Technical details: Pressure: 16 t Stroke: 250 mm Throat depth: 270 mm Installation height: approx. 400 mm Table dimensions: 800 x 500 mm Bore diameter: Ø 50 mm Ram surface: 220 x 360 mm Ram pin hole diameter: Ø 40 mm Table height above floor: 970 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V / 50 Hz Iaodpfx Aeu Nfmyef Iol Total power requirement: 3.0 kW Machine weight approx.: 2.3 t Machine dimensions approx. LxWxH: 1.8 x 1.5 x 2.72 m High-Speed Hydraulic Press Press frame made from rugged welded steel construction. Operating mode selectable via switch: jog, two-hand, foot pedal, or continuous operation with feed. The press features a piece counter on the side. EMERGENCY STOP switch With stroke limitation Press force adjustable With overload protection (pressure relief valve) With cutting impact damping SICK optical safety light curtain is pre-installed (can be reactivated as an option) *

Sąlyga: naudotas, Technical Details: Pressure: 63 t Throat depth: 315 mm Ram adjustment: 60 mm Stroke adjustment: 70 mm Ram stroke: 10 - 105 mm Strokes: 71 - 140 strokes/min Strokes per minute: Single stroke: 45 / 50 strokes/min Clearance between side stands: 355 mm Installation height: 335 mm Table (W x D): 800 x 630 mm Passage opening in table: 400 x 130 mm Clamping plate (W x D): 616 x 85 mm Ram clamping surface (W x D): 450 x 280 mm Pin hole in ram: Ø 50 x 83 mm Total power requirement: 7.5 kW Machine weight approx.: 5.9 t Control cabinet dimensions (L x W x H): 0.86 x 0.30 x 1.3 m Machine dimensions approx. (L x W x H): Press: 1.42 x 1.8 x 2.6 m Iodpfx Afjvt Nvpe Ieal High-performance press with roller feeder/strip line and straightening machine Application: Suitable for series production Equipped with Servo Roller Feeder MINI: verified by manufacturer P/A GmbH, type SRF 220 - For strip width 220 mm - Feed rate 150 m/min - Operated via handheld device Straightening system: - Manufacturer Wanzke, type KS 150 - Max. entry width: 200 mm - 2 powered entry rollers - 4 powered straightening rollers (top), vertically adjustable approx. 30 mm - 5 powered straightening rollers (bottom), fixed, not adjustable Decoiler = custom-made: - Mechanical/manual - Max. outer diameter: Ø 1,500 mm - Max. inner diameter: Ø 300 mm - Max. width: 200 mm Roller storage: - Roller system with 9 roller rails with 53 rollers (Ø 25 x 25 mm)

Sąlyga: naudotas, Gamybos metai: 1983, Technical details: Pressure: 160 t Throat depth: 360 mm Ram stroke - max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through opening in table: 4x Ø 62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram area: 450 x 850 mm Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter i.e. Isdpfeu Nfvuox Af Ioal *

Sąlyga: naudotas, Technical details: Iaodpfx Afeu Nflio Ijl Pressure: 20 t Ram stroke: 6 – 60 mm Throat depth: 176 mm Ram adjustment: 55 mm Strokes per minute: 155 spm Distance table/ram: 270 mm Clear width: 470 mm Table size: 300 x 450 mm Pass-through opening in table: 90 mm Ram clamping surface: 130 x 248 mm Inclination: 28° Ram bore: 25 x 65 mm Table height above floor: 775 mm Required air pressure: 5.5 – 6 bar Total power requirement: 3.5 kW Machine weight approx.: 1.0 t Machine dimensions (LxWxH) approx.: 1.3 x 1.1 x 1.95 m High-performance press Central lubrication with monitored light barrier (Linuflex system) Stroke counter (counter unit) Additionally included: one steel plate 315 x 400 x 50 mm with Ø 63 mm center hole

Sąlyga: naudotas, Gamybos metai: 1991, Technical Details: Pressure: 160 t Stroke: 500 mm Throat depth: 360 mm Maximum ram stroke: 500 mm Iaodsw D Awmepfx Af Iol Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through hole in table: 4x Ø62 mm Ram speed, forward: 200 mm/s Ram speed, return: 125 mm/s Ram surface: 450 x 850 mm Pin hole in ram: 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Approx. dimensions (LxWxH): 2.1 x 1.4 x 3.4 m

Sąlyga: naudotas, Technical details: Pressing force: 2.3 t Stroke: 280 mm Throat depth: 155 mm Ram stroke - max.: Forward: 0.08 m/sec Installation height with clamping plate ram/top: 355 mm Distance table/ram: max. 355 mm Clamping plate on table: 280 x 280 mm Pass-through opening in table: Ø 100 mm Ram speed forward: 0.08 m/s Ram speed return: 0.32 m/s Pin hole in ram: Ø 20 x 45 mm Height above floor: 725 mm Total connected load: 1.1 kW Machine weight approx.: 0.5 t Machine dimensions approx. LxWxH: 0.6 x 0.7 x 1.6 m Press with mechanical two-hand operation. Pressure test up to 2.3 t performed. Iasdpfx Asu Nfwlef Isl Good condition.

Sąlyga: naudotas, Technical details: Pressing force: 25 t Clearance between uprights: 360 mm Stroke: 500 mm Installation height, table/ram at top: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.200 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 71 mm Table opening: Ø 182 mm Ram clamping surface: 450 x 360 mm Ijdpju U D I Rofx Af Ijal Pin hole in ram: Ø 32 x 72 mm Ram diameter: Ø 125 mm Height above floor: 710 mm Total power requirement: 12.5 kW Machine weight approx.: 2.4 t Machine dimensions approx. (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control console (single-hand operation possible in setup mode) Continuous and single stroke modes TÜV certified until 05/2024 i.D. *

Sąlyga: naudotas, Technical Details: Pressing force: 25 t Stroke: 500 mm Installation height: table/ram top position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Isdpfovc Awxex Af Ijal Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Table opening: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Machine weight approx.: 2.2 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and single-hand operation in setup mode) Continuous and single stroke operation