Maka pirkti naudotą (50)

Sąlyga: labai geros būklės (naudotas), Katalogo numeris 7266 TECHNINĖ INFORMACIJA - veleno plotis: 530 mm - 4 peilių velenas - garso slopinamasis šukos - veleno apsauga - stalų ilgis: 2900 mm - ilgesnis įleidžiamasis stalas: 1655 mm Pgodpfxox Symbo Af Nsg - ketaus stalai - abu stalai reguliuojami - originalus reguliuojamas ketaus vedlys - stabdys - ištraukimo jungties skersmuo: 140 mm - variklis: 4 kW - matmenys (ilgis/plotis/aukštis): 2900x1000x1210 mm - svoris: 695 kg PRIVALUMAI – vokiška gamyba – 4 peilių velenas – stabdys – garso slopinamasis šukos – ilgesnis įleidžiamasis stalas – nedažyta – naudotas obliavimo stalas, labai gera būklė Originalios nuotraukos Mašinos paleidimo vaizdo įrašas: youtube.com/watch?v=v_3ECkLDWVI Grynoji kaina: 18 900 PLN Grynoji kaina: 4 500 EUR pagal kursą 4,2 PLN/EUR (Kainos gali keistis priklausomai nuo valiutų svyravimų)

Sąlyga: naudotas, Gamybos metai: 1993, Naudota mašina Pagaminimo metai: 1993 Įranga ir techniniai duomenys: - standus frezavimo velenas; nauji guoliai Podpow I Uinjfx Af Njgg - su stalo prailginimu ir ištraukiama rėmo atrama 2500 mm - Variklis 5,5 kW - Apsisukimų dažnis: 3000/4500/6000/8000/10000 aps./min. - Frezavimo atmušas su 2 reguliavimo galimybėmis: - bendras atmušas - galinės nuėmimo žnyplės - Ištraukimo gaubtai: 2 x 120 mm - Automatinis variklio stabdis - Sukimas dešinėn/kairėn - Su Haffner padavimu, 4 voleliai Svoris apie 700 kg Galimybė: pagal susitarimą Vieta: Flörsheim

Sąlyga: labai geros būklės (naudotas), Motor power 2.02 kW Pgjdpsh Im S Nsfx Af Nsg Pneumatic clamps Pneumatic depth adjustment Arm length 220 cm Working depth 16 cm

Sąlyga: paruoštas naudoti (naudotas), Motor 1.5 kW, 2 clamps. Bore depth 13 cm, bore width 20 cm, bore height 15 cm. Pedpfx Afet D Evps Nsgg

Sąlyga: naudotas, Gamybos metai: 1973, Sandėlio vieta: Nattheim Pgsdpfxsvvkt Uj Af Neg

Sąlyga: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 21017403, X ašies eiga: 1 250 mm, Y ašies eiga: 5 900 mm, Z ašies eigos atstumas: 250 mm, valdiklių gamintojas: BWO 900C, ruošinio svoris (maks.): 8 000 kg, sukimosi greitis (min.): 1 000 aps./min, sukimosi greitis (maks.): 17 000 aps./min, bendras svoris: 8 000 kg, ašies variklio galia: 12 500 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 32, tvirtinimo skersmuo: 90 mm, įrankio skersmuo: 160 mm, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, The machine is operational and in use; it will be available at the earliest from 01/11/2024. The vacuum pump, central lubrication system, tool magazine, and spindle have all been serviced and overhauled. The machine is connected to the power supply and can be inspected and tested on site. Additionally, the equipment includes software with a post-processor for stair production and a laser projector. Training can also be provided. Podpfx Asuyl Npef Nogg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1998, mašinos/transporto priemonės numeris: M000039046, gręžimo gylis: 180 mm, aukščio reguliavimo tipas: mechaninis, stalo plotis: 315 mm, stalo ilgis: 565 mm, grąžto griebtuvo dydis: 20 mm, bendras svoris: 260 kg, sukimosi greitis (maks.): 2 840 aps./min, galia: 1,5 kW (2,04 AG), darbinio aukščio: 850 mm, MAKA LB-1 Mortising Machine Robust, heavy-duty cast work tables and supports, combined with a large machine base, ensure perfectly smooth operation. The height and depth adjustments are monitored via graduated scales, and the extremely easy one-lever adjustment via ball guides enables fatigue-free operation. Technical specifications: Table size: 565x315 mm Working table height: 850 mm Longitudinal travel of drill head: 240 mm Max. drilling depth: 180 mm Vertical adjustment drill head: 140/160 mm Two-jaw drill chuck: 0–20 mm Speed: 2,850 rpm Motor power: 1.5 kW Pedpfxsyc Rz Ae Af Njgg Extraction port Ø: 90 mm Net weight: 60 kg Sound level according to DIN-45635/1600: 66.9 dB The machine is in perfect technical and optical condition and has been checked in our workshop. It is equipped with a dowel hole drilling device (16-22-25-32 mm) and a precision mitre fence (45°-0-45°). Shipping available at extra cost. We ship exclusively within the EU. No shipping outside the EU.

Sąlyga: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Kairės-dešinės sukimosi kryptys, 3-1000 aps./min., stabdymo variklis su Haffner 3 ritinėlių padavimu, 8 greičių, gera būklė. Transportavimas galimas už papildomą mokestį! Pgjdpeybv A Ajfx Af Nog

Sąlyga: naudotas, Three-phase motor, electric motor, milling motor Maka - Power: 1.3 kW - Speed: 2800 rpm - Shaft: Ø 18 x 40 mm Psdpfodwhuqsx Af Nogg - Design with: dovetail guide - Dimensions: 330/135/H195 mm - Weight: 15.7 kg

Sąlyga: reikia remonto (naudotas), Gamybos metai: 2005, veikimo valandos: 52 751 h, Funkcionalumas: nepatikrintas, X ašies eiga: 975 mm, Y ašies eiga: 9 100 mm, Z ašies eigos atstumas: 575 mm, nominali (akivaizdi) galia: 12 kVA, valdiklių gamintojas: BWO, valdiklio modelis: CNC 920, ruošinio ilgis (maks.): 8 500 mm, ruošinio plotis (maks.): 450 mm, ruošinio aukštis (maks.): 225 mm, sukimosi greitis (min.): 1 000 aps./min, sukimosi greitis (maks.): 20 000 aps./min, bendras svoris: 16 600 kg, ašies skaičius: 1, įrankių magazino lizdų skaičius: 32, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, nuolatinis darbinis slėgis: 6 juosta, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry incl. unit and tool changer: approx. 15,000 kg Weight of control cabinet: approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 L/h (uncompressed) Control type: BWO CNC 920 Number of controlled axes & max. traversing distances approx.: X - 975 mm / Y - 9100 mm / Z - 575 mm / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range 1,000 - 20,000 rpm Lubrication: permanent grease lubrication Pgjdpfxsv Rlpye Af Njg Tool holder: HSK 63 F Tool magazine: chain magazine with 32 slots / 160 mm Machine table: 2 clamping stations with 6 support crossbars each with clamping function / pneumatic clamping devices Maximum workpiece dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +-270° / B - +-98° At present, the machine is not operational. The spindle including retrofit kit for newer software needs to be replaced (can be requested via Maka). The machine can be inspected under power by appointment in DE94424 Arnstorf. All information without guarantee. Sale only to commercial customers. Inspection and collection by prior arrangement in 94424 Arnstorf (Germany).

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Mortising machine, oscillating chisel mortising machine MAKA Type DB 5 including many mortising tools, see photos Workpiece stops: 2 pcs Stop rails right/left: 2150 mm Workpiece extraction: 2x Foot pedal Pneumatic workpiece clamping, lateral: 1 unit Pneumatic workpiece clamping, from above: 2 units Extraction connection diameter 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (excluding stop rails) Note on used machines: • Subject to errors in technical details and prior sale. Pgsdpfx Afov Hm Nmo Njg • Stated prices are ex-works – loaded free of charge! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and phone number!)

Sąlyga: geras (naudotas), Gamybos metai: 2005, Used Machine MAKA PE 70 5-Axis CNC Machining Center for processing wood and plastics. Gantry-type machine with rack and pinion drive. Year of manufacture: 2005 Technical Data: CNC Control BWO 920 for 5-axis processing. 10.4" LCD display 2 MB NC memory, movable control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm construction height (top edge of vacuum cup) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm construction height (top edge of vacuum cup) A-Axis 540° (rotary axis), B-Axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y: 45 m/min. Z-axis: 24 m/min. A-/B-Axis: 10 m/min. Milling Unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1), 10 kW (S6), infinitely variable speed up to 22,000 rpm, HSK-F63 milling spindle, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool Magazine: - HSK-F63 tool interface for automatic tool changing system. - 1 drum magazine, horizontal, with 20 slots for tools up to D = 90 mm, with sorted storage up to max. 160 mm (three slots required for this). Machine Table: - 10 support rails on linear guides with pneumatic release for quick positioning. - 2 x control circuits for stops "raise / lower" - 2 x control circuits for sliding rail "raise / lower" - 2 x control circuits for pneumatics "clamp / release" - 2 x vacuum circuits with buttons for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated into the base frame, for removing chips and small offcuts up to max. approx. 100 x 100 x 100 mm. Pgjdpfx Afjvr A A To Neg Vacuum Supply: - Machine equipped with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with tank. - Vacuum supports with various suction pads. Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. Occupational Safety: - Moving protective cabin with safety bumpers on operator side. Repairs / Maintenance prior to delivery: - Maintenance newly performed. - Lamella curtain on gantry replaced. - Sliding window replaced. - Energy chain Y-axis replaced. - Energy chain Z-axis replaced. - Various cables and air hoses renewed.

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Used machine MAKA PM 270 R 5-axis CNC machining center for processing wood, plastic, and aluminum. Machine with gantry design, equipped with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC Control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis operation, with tool diameter 60 mm / tool length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with fixture height 180 mm (vacuum cups) Working areas in 3-axis operation, with tool diameter 60 mm / tool length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with fixture height 180 mm (vacuum cups) A-axis 540° (rotary axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling, with a 50° inclined head, max. power 12.5 kW, continuously adjustable speed up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface ISO 40 for automatic tool changer system. - 1 chain tool magazine with 32 positions for tools up to D = 90 mm, with sorted storage up to max. 160 mm (for which three positions are required). Pjdpfovmywqsx Af Njgg Machine table: - 10 support tubes on linear guides with pneumatic quick-release system for fast positioning. - 2 control circuits for stops "Raise / Lower" - 2 control circuits for sliding rail "Raise / Lower" - 2 control circuits for pneumatic "Clamp / Release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 1 integrated chip conveyor in the machine base for removal of chips and small waste up to approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! By arrangement, the system can be supplied including various tool holders. We would be pleased to provide you with a separate quotation for this. Vacuum supply: - 1 pc. vacuum pump, approx. 140 m³ suction capacity, including tank with 250 liter capacity for rapid vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Stops “raise / lower” for positioning components. Miscellaneous: - Automatic central lubrication system. - Control cabinet with air conditioning unit. - Projection laser Occupational safety: - Traveling safety cabin with safety bumpers on the operator side.

Sąlyga: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for processing wood, plastics, and aluminum. Machine in gantry design, with rack and pinion drive. Most recently used for timber staircase production. Year of manufacture: 1999 // RETROFIT in 2019 Technical Details: CNC control BWO Vektor 921 for 5-axis machining. 256 MB NC memory, USB port, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (top edge of vacuum cups) Working areas in 3-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum cups) A-axis 540° (rotary axis), B-axis 196° (swivel axis, +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min, Z-axis 15 m/min, A-/B-axis 10,000 °/min Milling unit: - 1 universal unit for 5-axis milling with 50° angled head, max. output 12.5 kW, variable speed up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface ISO 40 for automatic tool changer system. - 2 chain tool magazines, each with 32 slots for tools up to D = 90 mm, with sorted storage up to max. 160 mm (requires three slots for this). Machine table: - 10 support tubes on linear guides with pneumatic release mechanism for quick positioning. - 2 control circuits for stops “raise / lower” - 2 control circuits for pneumatics “clamp / release” - 2 vacuum control circuits with pushbutton for clamping and automatic reset via CNC programming. - 2 step separation devices, stroke approx. 320 mm. - Various clamping fixtures for posts and winding strings. - 1 integrated chip conveyor in the base frame, for removal of chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for rapid vacuum buildup. - Approx. 20 vacuum supports with various suction plates. - 4 stops raise/lower for positioning workpieces. Other features: - Automatic central lubrication. - Control cabinet with climate control. - Projection laser. Work safety: - Moving protective cabin with safety bumpers. Refurbishments / Repairs in 2018 / 2019: - Conversion of rotary and swivel axes to a new generation of drives (digital). - New energy chains on Y- / X- / Z-axis. - Complete rewiring; all power and measuring cables renewed. - All linear guide carriages replaced. - Z-axis ball screw and guide rails new. - X-axis guide rail new. - Control system upgrade to BWO Vektor 921, with V-CNC card and 256 MB NC memory. - Vacuum valves and hoses replaced. - 2 x tool magazines + tool grippers overhauled. - Swivel extraction system overhauled. Software: Pgedpjvmpx Refx Af Nog - It is possible to take over a current version of the Compass stair construction software. Compass is the leading provider for the planning and manufacturing of wooden staircases.

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Hauptantrieb Achsenanzahl: 5 Zusätzliche Ausstattung Energieketten: verschiedene Ausführungen Dieses 5-Achs MAKA FPM 470 CNC-Holzbearbeitungszentrum wurde 1999 hergestellt. Es ist ideal für komplexe Holzbearbeitungsprojekte und bietet Präzision sowie Vielseitigkeit. Wenn Sie auf der Suche nach hochwertigen Fräskapazitäten sind, empfehlen wir die zum Verkauf stehende MAKA FPM 470 Maschine. Kontaktieren Sie uns gerne für weitere Informationen zu dieser Maschine. Einsatzbereiche CNC-Holzbearbeitung Pgjdpsx D Ebxsfx Af Nsg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, Allgemeine Daten Maße Breite 3500 mm Maße Tiefe 6000 mm Maße Höhe 3400 mm Maschinengewicht 7000 kg Hauptantrieb Drehzahlbereich der Spindel 24000 U/min Spindelmotorleistung 10 kW Werkzeugaufnahme HSK 63F Anzahl Achsen 5 Verfahrwege X-Achse 2900 mm Y-Achse 1740 mm Z-Achse 1050 mm Werkzeuge Max. Werkzeuggewicht 3 kg Zusätzliche Ausstattung MAKA Schutzeinhausung, oben offen und mit zwei manuell zu öffnenden Fronttüren Dieses 5-Achs-Bearbeitungszentrum MAKA MK 7s wurde 2007 gefertigt. Es verfügt über einen robusten Rahmen mit 7000 kg Eigengewicht, arbeitet mit 400V/50Hz und hat eine Nennleistung von 18,5 kW. Die Maschine ist mit einer BWO 910 RC Steuerung sowie einer vielseitigen HSK 63F Frässpindel ausgestattet. Das lineare Werkzeugmagazin fasst Werkzeuge und Sägeblätter und wird durch einen Aluminium-Aufspanntisch mit den Maßen 2000 x 1000 mm ergänzt. Nutzen Sie die Gelegenheit zum Kauf dieses MAKA MK 7s Horizontal-Bearbeitungszentrums. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Fräsen Pjdpfxox D Dlce Af Negg

Sąlyga: naudotas, Feed unit MAKA - used - stepless feed speed Pgodou R S R Uspfx Af Nog ----- Technical data ----- Rollers: 3 pieces

Sąlyga: naudotas, Gamybos metai: 1992, su Centrofix – peilių velenas bepakopis padavimo reguliavimas 2 x ištraukiamosios velenos naudotas, geros būklės, aukštos komplektacijos Pjdpfoxuv N Iex Af Negg Gamintojas Maka Modelis DH 630 A Metai 1992 Mašinos Nr. 9201891 GS – patikrintas dėl medienos dulkių Variklis 6,7 kW Obliavimo plotis apie 630 mm Obliavimo aukštis apie 300 mm Stalas su viena reguliuojama slankiąja voleliu Segmentinis spaudimo balkis Segmentinė padavimo volelis 2 plieninės ištraukiamosios voleliai Padavimo greitis 0–21 m/min, bepakopis Peilių kiekis 4 vnt. Centro-Fix keičiami peiliai Skaitmeninis obliavimo aukščio indikatorius Elektrinis aukščio reguliavimas su rankiniu tikslaus nustatymo ratu Ištraukimo jungties skersmuo 150 mm Užimama vieta apie 1200 x 1200 x 1400 mm Svoris apie 1000 kg Sandėliavimo vieta: 97447 Gerolzhofen, laisvai pakraunama, be įpakavimo Perduodama esamoje apžiūrėtoje būklėje, be garantijos ar pretenzijų

Sąlyga: naudotas, Gamybos metai: 2008, 5-axis CNC machining center Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and technical data: CNC control: Siemens 840 D Max. travel of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = ±90 degrees C = ±270 degrees HSD milling unit with 10 kW, liquid-cooled Infinitely variable speed control up to 24,000 rpm. Permanent grease lubrication Tool holder HSK 63F 1 multi-spindle drilling unit with pneumatic advance stroke, mounted on the milling unit. 16 individually selectable vertical drilling spindles 1 horizontal twin drilling spindle in X-direction and 1 twin spindle in Y-direction Drill receptacles each 10 mm diameter Note: Workpieces that can be processed with the drilling unit = 900 mm (w/ X-/Y-reference spindle) Milling unit and drilling unit with 200 mm extraction connection, each with pneumatic shut-off valve, joint connection to customer's extraction system, diameter 300 mm Tool changer: 1 drum tool magazine for 5-axis milling unit, 20 slots for tool diameter 90 mm or max. 160 mm with organized storage, tool length max. 160 mm. One saw blade up to max. 300 mm diameter can be stored and changed, but occupies 3 magazine slots Special tool lengths up to max. 180 mm are possible with corresponding limitation of the working area. Tool weight max. 6 kg (incl. HSK holder) Total weight in the magazine approx. 60 kg. Magazine positioned at the aggregate exit position. Machine table: 8 support beams, manually adjustable along the machine length, each with 1 retractable workpiece stop, positioned fixed towards the operator. Division of the table surface into two clamping situations, each station: - 1 length stop, pneumatically raisable and lowerable Podpfx Afjx Enqzj Njgg - 2 pneumatically raisable and lowerable sliding rails - 1 vacuum clamping circuit Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with intermediate tank capacity 250 liters. 16 vacuum suction cups 110 mm diameter Vacuum cup assortment for stair production incl. touch valve. 1 clamping device for posts/curved parts Incl. chip conveyor Incl. NC-Hops 5 Wop system Incl. bumper safety device at the front and fencing on the side and rear Central lubrication Rated power: 21 kW Fuse: 63 A Availability: approx. March 2026 Location: Westerwald

Sąlyga: naudotas, Obliavimo staklės AH 430 - Gamybos metai: 1992 - 3 kW - 380 V - Valdymo pultas viršuje - Bendras stalo ilgis: 2750 mm - Obliavimo plotis: 430 mm - Tersa 4 peilių velenas - Stalo reguliavimas rankiniu ratuku - Variklio stabdis - Nusiurbimo gaubtas - Bendri matmenys: 2800 x 600 mm Pedpsx Htb Iofx Af Negg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1990, mašinos/transporto priemonės numeris: 8905829, obliavimo plotis: 430 mm, bendras aukštis: 1 200 mm, bendras plotis: 600 mm, stalo ilgis: 2 750 mm, įėjimo įtampa: 380 V, galia: 3 kW (4,08 AG), Planing width: max. 430 mm, table length 2750 mm 4-knife shaft with reversible knives, serrated table lips Chip thickness adjustment via handwheel with magnifier display Motor: 3 kW, 380 V Podpfx Afsuivw Te Nsgg Condition and further details as shown in the pictures

Sąlyga: geras (naudotas), Gamybos metai: 1991, pjovimo plotis (maks.): 1 050 mm, pjovimo aukštis (maks.): 135 mm, pjūklo disko skersmuo: 400 mm, aukščio reguliavimo tipas: mechaninis, bendras svoris: 930 kg, galia: 5,5 kW (7,48 AG), Įranga: dozatorius, MAKA SC 3200 Sliding Table Panel Saw with Scoring Unit Manufacturer: MAKA/Griggio Technical Data: Psdpfxsp H Tgbe Af Nogg Sliding table length: 3200 mm Cutting length: 3300 mm Cutting width right of saw blade: 1050 mm Max. saw blade diameter: 400 mm Max. cutting height: 135 mm Saw blade tiltable: 0-45° Cutting height at 45°: 90 mm (with 400 mm saw blade) Main motor: 5.5 kW / 400 Volt 3 speeds: 3,000 / 4,000 / 6,000 rpm Scoring unit motor: 0.75 kW Scoring blade diameter: 125 mm Extraction port: 120 mm Wide and narrow safety hood Dimensions: 3250 x 3100 x 830 mm Weight: 922 kg

Sąlyga: naudotas, Kvadratinis kaiščių gręžtuvas, 4-kampis kaiščių pjoviklis Grandininis kalimo įrenginys, kaiščių skylučių kalimo mašina MAKA (Max Mayer) TIPAS ED 30 Gamintojo Nr. 3130 Kaiščio plotis 75 mm Išsikišimas 0 iki 75 mm (be medinės plokštės) Rankenėlės eiga apie 125 mm Spaudimo plotis maks. 140 mm Kaltelio plotis 8 mm Apsisukimų skaičius 2800 aps./min. Variklio galia 0,3 kW Tinklo įtampa 380 V, 50 Hz - reguliuojamas kaiščio kelias ant ekscentrinės ašies - gylio reguliavimas rankenos pagalba - kaiščių pjoviklis reguliuojamas 75 mm per sraigtinį veleną Pedpfx Afexw Rbdo Negg - greito fiksavimo rankenėlė tvirtinimo įtaisui - dviejų kolonų kreipimas, tvirta konstrukcija - tinka stačiakampių skylių iškalimui kaiščio sujungimams Užimama vieta I x P x A 420 x 360 x 400 mm Svoris 38 kg labai gera būklė

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 12 805 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 900 mm, Y ašies eiga: 1 900 mm, Z ašies eigos atstumas: 1 000 mm, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 45 m/min, valdiklių gamintojas: Siemens, valdiklio modelis: 840D SL, ruošinio ilgis (maks.): 2 000 mm, ruošinio plotis (maks.): 1 000 mm, ruošinio aukštis (maks.): 600 mm, bendras aukštis: 3 700 mm, bendras ilgis: 6 700 mm, bendras plotis: 3 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, stalo apkrova: 500 kg, bendras svoris: 8 000 kg, veleno greitis (maks.): 24 000 aps./min, veleno veikimo valandos: 4 314 h, ašies variklio galia: 16 W, įrankių magazino lizdų skaičius: 20, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, For sale is a high-precision 5-/6-axis CNC machining center MAKA MK 7s from MAKA Systems GmbH, equipped with Siemens SINUMERIK 840D SL control and OP15 PCU operator panel. Pgsdpfox Hv I Dox Af Nsg The machine comes directly from production, is powered on, and can be inspected or demonstrated in operation at any time. It is in excellent technical condition and has been regularly maintained. TECHNICAL HIGHLIGHTS: - 5-axis milling technology, retrofitted with a 6th axis (B-axis / Lehmann rotoFIX EA-530) - Spindle fully overhauled (2025, €18,000 investment) - Tool magazine with 20 positions (rotary carousel) - Tool holder HSK A63, speed 24,000 rpm, power 16 kW - Rapid traverse: X/Y = 60 m/min, Z = 45 m/min - Positioning accuracy per axis: ±0.1 mm/m, repeatability: ±0.05 mm/m - 3D wireless touch probe, tool breakage monitoring, spray cooling system - Rectangular frame table with zero-point clamping system and chip management (brushes, guide plates, conveyor belt) - Workpiece clamping pneumatic/hydraulic incl. power unit - Hydraulic system up to 210 bar (3 clamping circuits) - CAD data, technical documents, and layout plan available WORKING RANGE & DIMENSIONS: - Travel X/Y/Z: 2900 / 1900 / 1000 mm - A-axis: 196°, C-axis: 540° - B-axis (Lehmann rotary table): retrofitted, integrated into control - Working space: 2000 × 1000 × 600 mm - Machine weight: approx. 8 t - Dimensions (L × W × H): approx. 6.7 × 3.0 × 3.7 m ADDITIONAL EQUIPMENT: - Saw blade pick-up station (Ø 450 mm) - Reinforced front doors, sheet metal enclosure with roof in sound-insulated design - Automatic safety sliding doors - Air blast nozzle in tool magazine (spindle cleaning) - Electrical connection: 400 V / 50 Hz – 19 kW – 43 A - Pneumatic connection: 6 bar / ½” – air consumption approx. 800 l/h OPERATING HOURS / RUN TIMES: - Power-on hours approx. 12,805 h (as of Oct 2025) The counter runs whenever the machine is powered on—including during setup, maintenance, or idle times. - Spindle running time total: 4,314 h The current spindle was completely renewed and overhauled in 2025 SPECIAL FEATURES: - Under power – demonstration possible at any time - Direct from production – no dealer sale - Complete technical documentation available - Support with dismantling, loading, and transport possible (subject to additional cost) Price €174,900 net – optionally incl. 6th axis (Lehmann) €199,000 Price is net, negotiable for quick completion. All details provided to the best of our knowledge and belief. Changes, errors, and prior sale reserved.

Sąlyga: naudotas, Gamybos metai: 1993, Stalo kėlimas: motorizuotas Stalo ilgis: 3000 mm Stalo plotis: 800 mm Maks. stalo eiga: 500 mm Stovo išlinkis: 600 mm Spaudimo batukas: spyruoklinis Šlifavimo batuko plotis: 150 mm Šlifavimo juostos ilgis: 7830 mm Šlifavimo juostos plotis: 150 mm Viršutinė juostos danga: yra Juostos greitis 1: 18 m/sek Juostos greitis 2: 36 m/sek Psdpfxjvnw Ngj Af Nogg Važiavimo kryptis: kairė/dešinė Svoris apie: 480 kg Variklio galia: 2,2 kW Nusiurbimo diametras: 2x160 mm Sandėlio vieta: pas klientą