CNC kalimo agregatas

Benz. CAVO-V Fitschenaggregat

Sąlyga: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 Features and technical data: Right-hand configuration Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Knedpfxet Hagns Adksd Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5% / 50 Hz including: Press mechanism with feed cylinder, main cylinder, clamp cylinder Connection fitting for transport piping Chromed clamp Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and Screw conveyor discharge screw + motor Side panels standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with fill level limit switch Material: Planer shavings, sawdust from solid wood, loose, clean and free of contaminants* Max. dimensions: 12 mm Throughput capacity: approx. 50 m³/year/ *Contaminant specification: Anything other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on the material. Average values are indicated. Depending on mix, moisture, and material characteristics! Application not or not fully known/specified. Machine is sold appropriately and according to requirements by a specialist dealer. In the event of heat build-up, the run time may be drastically shortened due to increased temperature. Availability: short notice Storage location: Solingen

Sąlyga: geras (naudotas), pjovimo aukštis (maks.): 200 mm, grandis plotis: 400 mm, įėjimo įtampa: 380 V, aukščio reguliavimo tipas: elektrinis, sukimosi greitis (maks.): 3 400 aps./min, galia: 37 kW (50,31 AG), Maksimali darbinė aukštis: 200 mm Grandinės plotis: 400 mm Ksdpfxetvpfms Adkend Maksimalus atstumas tarp išorinių peilių: 380 mm Peilių skersmuo (min./maks.): 250 / 350 mm Reguliuojamas padavimo greitis (su inverteriu): 5–30 m/min Mažiausias ruošinio ilgis: 1000 mm Peilio laikiklio skersmuo: 70 mm Peilio laikiklio veleno apsukos: 3 400 aps./min. Variklių galia: 2 x 37 kW

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Kjdpfx Adormucxjksnd Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: naudotas, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness 0.4 - 20 mm 18.5" touchscreen control in 16:9 format, swiveling and pivotable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motorized adjustable infeed guide Pre-milling unit for joining before the gluing station with 2 NC servo axes Syncro edge magazine, fully automatic for coil and strip material MOT3, with 2 motorized pressure rollers Gluing station GLU-JET automatic. For cartridges and PU gluing. Thin-film technology Glue height adjustment / sensor nozzle Maximum edge height 60 mm Pressure unit with 4 rollers, motor-pneumatic. NC servo axis End trimming unit for coil and strip materials up to 20 mm edge thickness, with electro-pneumatic adjustment from 0-10° bevel of the saws Flush trimming unit 20 mm MOT3, motorized horizontal adjustment Multi-function milling unit MOT6 with multifunctional milling technology Flush trimming 8 mm Radius milling R1, 3; R2 (2x) Chamfer milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating probe, corner copying, postforming corners, with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear vertical edges. Working height 60 mm. R1, 3; R2 (2x); Chamfer 45° Scraper unit MOT8 incl. high gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); Chamfer 45° Nesting package Face scraper unit with pre- and post-sensing Usage-controlled, oscillating buffing unit for finishing and edge polishing with 2 textile discs Spraying device in infeed and outfeed area, as well as antistatic agent at the pressure unit Infeed area electronically controlled release agent spraying device Pressure unit electronically controlled antistatic spray device Ksdpsxnmu Iefx Adkjnd Outfeed area electronically controlled cleaning agent spraying device with cleaning agent Automatic chain lubrication Barcode scanner Machine has FACTORY SERVICE and is in TOP CONDITION Year of manufacture 2021 / Leasing possible Machine is connected and ready for demonstration at the exhibition center Available from stock Lieboch

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Machining center Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working range X: 2,500 mm Working range Y: 1,300 mm Working range Z: 4 - 80 mm Number of routing units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: Swivels 90° X-axis speed: 130 m/min Y-axis speed: 80 m/min Z1-axis speed: 50 m/min Ksdoh E Sghopfx Adkond Z2-axis speed: 27 m/min Spindle speed: 18,000 rpm Dismantled - available immediately

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007601, Working area X-axis: 4320 mm Kedpou N Skfofx Adksnd Working area Y-axis: 2245 mm Working surface: nesting table Main spindle power: 9 kW Number of controlled axes: 3 axes Number of drilling spindles: 16 Number of tool positions: 8

Gamybos metai: 2008, Sąlyga: geras (naudotas), Industrinis nerūdijančio plieno oro drėkintuvas, garo generatorius Išorinis įrenginys Knjdpfxjfl Iquj Adkjd 4x8 kW šildymo elementai, 32 kW maks. 160 °C

Sąlyga: naudotas, Gamybos metai: 2019, Used machine Kedswkbbdspfx Adkjnd Year of manufacture: 2019 Base machine - DYNESTIC 7532-10.5 Automatic Dynestic table For classic nesting processing with wear plate Processing length: 3100 mm Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregates head and consoles Gantry in bridge design Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning Technical data: Processing dimensions: Max. support area on nesting table: X = 3100 mm, Y = 1560 mm Max. travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm Max. clearance height (DYNESTIC table): Z = 100 mm from table top (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min DYNESTIC table Rigid, continuous machining table with grid layout, continuous slots in X and Y directions, slot spacing: 50 mm with 25 meters of sealing cord for clamping the wear plate Vacuum zones Single-circuit vacuum system Drilling unit 7877, 19 spindles Drive power: 1.7 kW 13 vertical spindles, individually selectable U-shaped arrangement 5+4 in X and 4 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from mounting end (depending on panel thickness) Spindle projection: 70 mm Rotation direction: alternating right / left n(max.) 1000 - 4400 rpm, infinitely variable Mount: M10 thread - fitting diameter 11 mm without tool, without holder 6 horizontal spindles 2 double drilling spindles in X direction 1 double drilling spindle in Y direction Mount: M10 thread, fitting diameter 11 mm Max. total drill length: 63 mm from mounting end without tool, without holder Milling unit 7842 Power: 12.0 kW (S6) n(max.) = 1000 - 24000 rpm, infinitely variable max. performance at 12000 - 24000 rpm air-cooled with HSK-F 63 tool holder with right-hand thread nut (for right-hand rotation tools) with collet chuck for HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools: milling and grinding tools up to max. Ø 160 mm Safety enclosure according to CE standard Safety fence at side and rear Vacuum pump: 500 m³/h, dry-running Personnel safety via light barriers at the front of the machine Remote control unit for operating the machine with the following functions: > Start / Stop of machining program > Speed control of machining cycles > Reset button > Manual feed / rapid traverse for all axes > EMERGENCY STOP CAMPUS V7 CAD/CAM Software, 1x machine license Consisting of: 1. CAMPUS NC-HOPS 2. CAMPUS MT-Manager 3. CAMPUS Workcenter 4. CAMPUS DXF interface CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology Automatic central lubrication Automatic lubrication at defined intervals Additional sealing against dust due to overpressure in each guide carriage Simultaneous lubrication for all linear guides in X, Y, and Z directions, for all ball screws in Y and Z directions, for all milling spindle bracke

Gamybos metai: 2006, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: W144, Technical Data: Ksdpfxsp Artdj Adkend 1 Demag KBK column-mounted slewing jib crane, rated load 50 KG Rated load at full outreach: 50 KG Height: approx. 3.8 m, lower edge of jib: approx. 3.3 m Outreach: approx. 5 m, hook height: approx. 2.95 m Total weight: approx. 300 KG Equipped with 125 kg steel chain hoist with pendant control (2 lifting speeds) Connection: 400V 16A, slewing range 270° The crane is dismantled and packed on a pallet Inspection logbook available Very good condition, see pictures Item location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Shipping via freight carrier or collection by appointment

Sąlyga: naudotas, Gamybos metai: 2007, with photoelectric sensors in the infeed area, the dryer only activates when parts are detected by the sensor; otherwise, the dryer remains in energy-saving standby mode with the reflector halves almost closed. Operation via a Siemens control panel. - Manufacturer: Venjakob - Model: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1,300 mm - Max. part height: approx. 100 mm - Number of lamps: 2 units - Suitable for mercury and gallium lamps - 3D for edge drying - Maximum lamp power: 120 W/cm - Lamp power infinitely adjustable: 50–120 W/cm - With standby function Ksdpfeu S N R Ejx Adkend - With conveyor - Feed rate: approx. 2.5 – 7.5 m/min - Length: 2,500 mm - Width: 2,750 mm - Total connected load: approx. 45 kW - Location: in stock - Voltage/Hz: 400/50