Temperatūros Vonią pirkti naudotą (6 212)

Būklė: labai geros būklės (naudotas), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Nominal Voltage: 400V 3/N PE 50 Hz Nominal Power: 6.7 kW Nominal Current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display of setpoint and actual temperature values - Easy adjustment using +/- button - Digital input for temperature in °C - PLC compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-supplied test specimen sensors Shelving: Stainless steel, support surface 820 x 710 mm Maximum load per shelf: 35 kg Total load with maximum shelf configuration: 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic with stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Todpfxoziycbe Aa Dsa Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Temperature change rate: measured in center of test chamber according to DIN 50 011, Part 12 Heating: 2.5 K/min Cooling: 2 K/min Maximum heat radiation: 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimens, without radiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Nominal power: 6.7 kW Nominal current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg Important security information for buyers! The following points are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and error!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), We are offering a Weiss temperature test chamber. Weiss Temperature Test Chamber with S!MCON / 32 Controller, Water-Cooled Control Unit: "Touchpanel" All control and operation commands can be triggered simply by touching the function symbols on the "Touchpanel" control unit. Tsdpsziyb Refx Aa Dsa Adjustable Feet To compensate for floor unevenness and ensure sufficient ventilation of the machine components, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measuring lines and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: Nominal width 125 mm L1: Nominal width 50 mm (Refrigerant converted to R-452A) Test Chamber Volume: approx. 600 liters External Dimensions (with hinges and door lock): Height 1995 mm, Width 1090 mm, Depth 1660 mm External Dimensions (without hinges and door lock): Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal Dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max.: 2500 W Operating Data: Internal lighting: Halogen bulbs 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Main fuse (on-site): 16 A slow-blow Sound pressure level: approx. 58 dB(A) (measured 1m in front, 1m height) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your safety as a buyer, please note the following information! The following steps are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and details subject to change and errors excepted!) Feel free to contact us by phone for any further questions.

Būklė: labai geros būklės (naudotas), Julabo Julabo Transparent Bath Thermostat CT 72/P incl. ED Thermostat Product Description: For sale is a Julabo transparent bath thermostat CT 72/P with Julabo ED (v2) temperature controller. The device comes from a laboratory inventory and is in used but fully functional condition. The bath heats and regulates stably, circulation is present (see photos). Ideal for laboratories, industry, training, experimental technology, or development. Technical Data (Excerpt) Manufacturer: Julabo Labortechnik GmbH (Made in Germany) Model: CT 72/P with ED Thermostat (v2) Bath temperature range: approx. +10 °C to +60 °C Temperature stability: ±0.02 K Heating capacity: 2000 W at 230 V Circulation pump: Flow rate approx. 15 l/min Bath volume: approx. 18 liters Tjdpfx Aaszix Dqj Dsa Bath material: Acrylic glass / stainless steel Interface: RS232 Power supply: 190–253 V / 50–60 Hz Protection class: I / IP20 Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and errors!) Further questions can be answered by phone.

Būklė: naudotas, Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, Kilus klausimams, bet kada galite kreiptis į mane el. paštu. Įrenginio vieta – Laupheimas. Todpfx Aoya H Uyoa Dea

Būklė: naujas, Gamybos metai: 2025, SANITARINIS KONTEINERIS WC + DUŠAS LUX Tiesiai iš gamintojo – aukštos kokybės sprendimas už patrauklią kainą. Konteineris daugeliu atvejų iš karto prieinamas iš sandėlio. GRYNASIS KAINA TIK 4290 EURŲ. Galimas transportavimas po visą Europą – mielai paruošime individualų pasiūlymą su pristatymu. TECHNINIAI DUOMENYS Tsdpjzgtdmsfx Aa Dsa • Išoriniai matmenys: 2,20 m plotis × 1,20 m ilgis × 2,30 m aukštis • Svoris: apie 340 kg • Tvirto, sustiprinto plieno rėmas • Sienų ir stogo plokštės: 50 mm sandwich tipo plokštės • PU poliuretano putų izoliacija • Išorinė apdaila: cinkuoto plieno lakštas • Vidinė apdaila: cinkuoto plieno lakštas • PVC grindų danga • Pilnai įrengta vandentiekio, nuotekų ir elektros instaliacija • Vandens jungtis galinėje sienoje • Nuotekų jungtis galinėje sienoje • Išorinis 230 V pajungimas • Natūralus vėdinimas WC KABINOS ĮRANGA • Rakinamos durys su cilindriniu užraktu • Kompaktiška WC sistema • Praustuvas su vienos svirties maišytuvu • Tualetinio popieriaus laikiklis • Veidrodis • LED lubų apšvietimas • Rozetė • Vėdinimo grotelės DUŠO KABINOS ĮRANGA • Rakinamos durys su cilindriniu užraktu • Dušo padėklas • Dušo maišytuvas su rankiniu dušeliu • Lubų apšvietimas • Vėdinimo sistema PAPILDOMA ĮRANGA • Vandens šildytuvas • Elektrinis šildytuvas • Individuali komplektacija pagal poreikius JŪSŲ PRIVALUMAI ✓ Gamyba tiesiogiai iš gamintojo ✓ Patvari pramoninė kokybė ✓ Aukštos kokybės šilumos izoliacija ✓ Ilgaamžė plieno konstrukcija ✓ Paruoštas naudojimui ✓ Paprastas montavimas ✓ Pristatymas į visą Europą ✓ Individualūs sprendimai pagal užklausą TVIRTA PLIENO KONSTRUKCIJA Tvirtas plieninis pagrindas ir rėmas sukurti ilgam ir intensyviam naudojimui. GAMYBA PAGAL PRAMONINĮ STANDARTĄ Gaminama naudojant modernią įrangą ir taikant griežtą kokybės kontrolę. INDIVIDUALŪS SPRENDIMAI Mūsų konteineriai gali būti pritaikomi konkrečiam projektui ir vietos sąlygoms. STOGO SISTEMA Stogui naudojamos sandwich tipo plokštės su PU izoliacija. IZOLIACIJA Sienoms naudojamos sandwich plokštės su PU izoliacija ir mineraline vata (Rockwool). NEŠANTIS SISTEMA Pagrindinė konstrukcija – iš cinkuoto C ir U profilių. Medžiagos storis parenkamas pagal statinius skaičiavimus ir būsimas naudojimo sąlygas. PAGRINDINĖ KONSTRUKCIJOS SISTEMA SDS Containers moduliniai konteineriai projektuojami atsižvelgiant į paskirties vietos klimato sąlygas. NUOTEKŲ SISTEMA Konteineriuose įrengta integruota vandens nutekėjimo sistema su paslėptais latakais konstrukcijos viršuje. Lietaus vanduo nukreipiamas į kampus ir pašalinamas per specialiai suprojektuotas kampines atramas. Mielai patarsime ir pateiksime neprivalomą pasiūlymą. Susisiekite dėl daugiau informacijos, pristatymo terminų ir transportavimo išlaidų. TRANSPORTO PASLAUGOS Dirbame su keliais transporto partneriais ir galime užtikrinti ekonominius pristatymus visoje Vokietijoje bei ES. Naudojame transporto priemones su pakrovimo liftu ir rankiniu vežimėliu, todėl galime iškrauti konteinerį bet kurioje su transporto priemone pasiekiamoje sutvirtintoje aikštelėje.

Būklė: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, bendras svoris: 341 kg, įėjimo įtampa: 230 V, temperatūra: −86 °C, bendras plotis: 1 148 mm, bendras ilgis: 960 mm, bendras aukštis: 1 981 mm, garantijos trukmė: 2 mėnesiai, tuščias svoris: 304 kg, bakelio talpa: 949 l, įėjimo dažnis: 50 Hz, Įranga: aušinimo blokas, kompresorius, šaldiklis, Thermo Scientific Ultra-Low Temperature Freezer TSX70086V. With 5-door option. Includes 5 stainless steel shelves. Capacity: 700 x 2-inch boxes. Volume: 949L. Temperature range: -50 to -86°C. Tjdewth H Sopfx Aa Dsa Touchscreen LCD display. Manual defrost. External dimensions (H x W x D): 198.1 x 114.8 x 96 cm. Internal dimensions (H x W x D): 130 x 101.9 x 71.9 cm. NEW and UNUSED in original packaging. Larger quantities available on request.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Binder ultra-deep freezer UF V 700. Internal volume: 700 L. Temperature range: -90°C to -40°C Lowest energy consumption in its class High-performance cascade compression refrigeration system Environmentally friendly refrigerants R-290 and R-170 Tjdpswurnvofx Aa Dja Thermal insulation with unique long-life VIPs (vacuum insulation panels) Innovative door seal design reduces ice formation Ergonomic door latch handle Corrosion-resistant interior made entirely of stainless steel Removable inner doors made of stainless steel 3 flexibly positionable shelves made of stainless steel Volt-free alarm contact for connection to building alarm systems Internal data logger; measurement values can be read in open format via USB Ethernet interface 2 cable ports Ø 28 mm at the rear UNUSED, in original packaging. Functional guarantee.

Būklė: labai geros būklės (naudotas), Espec Model: PL-2KPH ESPEC PL-2 KPH Climate Chambers, air cooled Temperature range: -40°C to +180°C Humidity range: approx. 10 to 98% RH Dependency on temperature range and humidity fluctuation: ± 2.5% RH over time ± 3.0% RH Internal dimensions: Width 500 × Height 750 × Depth 600 mm External dimensions: Width 910 × Height 1590 × Depth 973 mm Microprocessor control with 10 internationally pre-set test standards and 20 freely programmable memory slots, as well as integrated timer with program start/stop automation and error code display, programming via touch screen. Alarm indicator (acoustic and visual) Device protection in case of overtemperature Tjdpfx Aszimfpoa Dja Overtemperature protection with 2 switching contacts Test chamber lighting Operating hours counter Test chamber volume: 225 l Weight: 300 kg net Electrical connection: 400 V 3/N 50 Hz Plug: CEE 16 A, max. current consumption: 11.0 A Refrigerant: R404A Scope of delivery: Espec climate test chamber Important safety information for you as a buyer! The following points are carried out on all chambers offered by us prior to sale: 1. Functional test and replacement of necessary components 2. New refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: see image (Changes and errors in technical data and specifications reserved!) If you have further questions, we will be happy to answer them by phone.

Būklė: geras (naudotas), Type: TS -70/1000-10 For sale: CTS Temperature Test Chamber Model: TS -70/1000-10 Cooling: Water-cooled refrigeration unit, Compressor has been replaced! Features: - Multi-touch control panel - USB and Ethernet interfaces - Feed-throughs for test cables (4 × Ø 125 mm) - Safety temperature limiter Areas of application: - Environmental and endurance testing - Thermal cycling (stress screening) - Quality assurance and R&D - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: Tsdpfx Aoziizyea Dsa Height approx. 1,000 mm, Width approx. 860 mm, Depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, Width approx. 1,270 mm, Depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ±0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note the following! The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and data may be subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Vötsch Type: VTS 7018-5 Water-cooled temperature test chamber System converted to R-452A Temperature range: -70°C to +180°C Todpfx Aajziixxe Dja Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation at +20°C: 3,000 W Heat compensation at -20°C: 3,000 W Test chamber dimensions: width 580 mm, depth 450 mm, height 750 mm External dimensions: width 870 mm, depth 1280 mm, height 1575 mm Test chamber volume: 190 liters Nominal voltage: 3/N/PE AC, 400V ±10%, 50Hz Nominal power: 100 kW, Nominal current: 21 A Overcurrent protection (on-site): 32 A slow-blow Sound level at 1m distance (free field measurement): < 69 dB(A) Side port: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R-452A and R23 Weight: approx. 460 kg For your safety as the buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors reserved!) Further questions can gladly be answered by phone.

Būklė: labai geros būklės (naudotas), Heraeus Vötsch Model: VT 7021 Temperature Test Chamber, Air-Cooled 1 Port, nominal width 80 mm Test Chamber Volume: 210 liters Temperature Range: -70°C to +180°C Temporal Temperature Deviation: ±0.2 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±1.5 K Temperature Change Rate (Heating): 2.5 K/min Temperature Change Rate (Cooling): 2.5 K/min Maximum Heat Compensation: 800 W Tsdpfx Aoziiw Ija Dea Test Chamber Dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External Dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical Connection: 1/NPE AC 230 V ±10% 50 Hz Rated Power: approx. 1.8 kW, Rated Current: 12 A Refrigerant: R404A and R23 Weight: 355 kg Important information for your security as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and specifications are subject to change and errors reserved!) If you have further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal supports to increase the load-bearing capacity of the base Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Tjdpfx Aszh Htwsa Dja Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg Important safety information for buyers! The following steps are carried out in advance for the chambers we offer: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data; all information without guarantee!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in steady-state condition according to IEC 60068-3-5, depending on test chamber temperature: timewise ± 1 K Temperature change rate according to IEC 60068-3-5: Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: The water level is below the sample rack Water level = 0 mm: Water level is at the upper edge of the sample rack Data for standard spray device: Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B: Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-tempering: Volume: approx. 2000 L Temperature range for pre-tempering: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Data for installation and operation: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feedthroughs: 1 feedthrough Ø 50 mm, installed on left Test chamber volume: approx. 500 liters Refrigerant: R-404a Electrical connection: Nominal voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: approx. 26 kW Nominal current: approx. 44.0 A (neutral loaded) Fuse protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Tsdpfx Aozh D S Roa Dsa Scope of delivery: (see photo) (Subject to technical modifications and errors in data and specifications!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Weiss Model: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled Tedpfjzh D Ryex Aa Doa (Test Chamber Explosion-Proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test Chamber Designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cooling / Heating Operation: -70 to +180°C Climate Operation: 10 – 95°C Humidity: 10...98 % rH Temperature Change Rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Required fuse (on site): 32 A slow-blow Permissible test specimen weight: Total load of grates: 80 kg Test chamber floor: 80 kg, insert grate: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The evaporator of the air conditioning unit was replaced) Important safety information for you as buyer: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, chambers are subjected to documented test runs. Condition: used / gebraucht Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) For further questions, please feel free to contact us by phone.

Būklė: geras (naudotas), CTS Model: T-70/600/S Water-cooled temperature test chamber Refrigerant: Converted to R-452A Control system: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific DUT control Technical Data Temperature testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, no heat radiation, and without additional equipment. Dimensions: Test chamber volume: 600 liters Internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Tedpozh D E Rjfx Aa Dea Refrigerant: R-452A / R23 Weight: 700 kg For your safety as a buyer, the following information! The following work is carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data, specifications reserved!) For further questions, feel free to contact us by phone.

Būklė: geras (naudotas), Autotherm Type: Temperature Control Unit Autotherm AW 95-12/VK/E Temperature Control Unit Autotherm AW95-12_VK for Water/Glycol Tempering (completely overhauled) Autotherm Temperature Control Unit AW: For highly precise temperature regulation of water Autotherm temperature control units are used in various sectors of industry, research, and laboratory applications. For example, temperature control units supply tools, open baths, double-walled tanks, heat exchangers, and thermal chambers with temperature-controlled water to maintain them precisely at the desired temperature. Areas of Application: - Mechanical engineering, for example in the solar and wind power industries, textile industry - Plastics processing - Chemical and pharmaceutical industries - Paper manufacturing - Medical technology - Food industry - Research Temperature Control Unit Autotherm AKW AW95-12/VK Temperature range: RT°C / +95°C Heating capacity: 12.0 kW Cooling capacity: 18.0 kW Passive cooling system via heat exchanger / connection to cooling water network required Rated capacity: 14.5 kW Dimensions: 600 mm x 840 mm x 910 mm Power supply: 400 Volt / 50 Hz 13,400 Watts 19.6 A 5.1 bar Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) If you have further questions, we are happy to answer them by phone. Todpfxszhkb Es Aa Dja

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Parduodamas druskos vonios cinkavimo įrenginys su kranu ir ištraukiamąja sistema bei įvairiais priedais. Cinkavimo įrenginys buvo pagamintas savarankiškai ir atitinka reikalavimus, tačiau neturi CE ženklo. Vonios matmenys: ilgis – 990 mm, plotis – 490 mm, aukštis – 680 mm. Sudaro 6 vonios. Bendri matmenys: ilgis – 4,70 m, plotis – 1,40 m, aukštis – 0,95 m. Kranas ir ištraukiamoji sistema įskaičiuoti į kainą. + 6 papildomi šildymo elementai. Todpfx Aaszkf E Rj Dea Įrenginį galima išmontuoti ir išsivežti patiems! Galima apžiūrėti iš anksto susitarus.

Būklė: naudotas, 250H18 DC76, 210 H, S.I.S.E, oil temperature control unit, 250°C Model: 250H18 DC76 Type: 210 H Condition: Used Todpjrx Tcyofx Aa Dsa

Gamybos metai: 2007, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Kasper REGELSTAR Combi C6 Stock no.: 503594 Machine type / Device type: Temperature Control Unit Manufacturer: Kasper Model: REGELSTAR Combi Year of manufacture: 2007 Total connected load: 18 A Heating capacity: 9 kW Cooling capacity: 36 kW at 80°C Pump capacity: 60 l/min Pump capacity: max. 4 bar Maximum temperature: 150°C (oil) Tsdpfx Aaewxvawo Dja Maximum temperature: 95°C (water) Circulating medium: Water & Oil

Būklė: naudotas, CTS Type: TS -70/600-13 Water-cooled climatic test chamber Series: TS -70/600-13 Control system: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side specimen control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 2250 mm, Width approx. 1300 mm, Depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from +120°C to -40°C Temperature deviation: ± 0.1 K over time, ± 0.5 K spatially Electrical connection: 400 V / 3P / N / PE Nominal power: approx. 27.8 kW Tedezg Tzfopfx Aa Doa Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y / 4PC-10.2Y Refrigerant: R-404A / R-23 Weight: 1350 kg For your safety as a buyer, please note the following information! The following measures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Temperature Test Chamber T-55/1000 Li Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS chamber series is composed as follows: For example, Type T -55/1000/Li 1) T stands for: Temperature 2) -55 stands for: lower temperature limit -55 °C 3) 1000 stands for: 1000 liters test chamber volume 4) Li stands for: Special equipment for tests with lithium-ion accumulators Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text Ethernet interface RS 232 interface Free switching channels for user-side test specimen control Tsdpfxezg Ty Uo Aa Dja Test chamber lighting: Energy-efficient, high-luminance LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4'' for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect the performance data. Dimensions: Test chamber volume 1000 liters Internal dimensions Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operational data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at 1m distance from the front) Weight approx. 1000 kg Heat emission to installation room 10.4 kW Cooling unit: Water-cooled, low-noise, fully hermetic Continuous performance adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by telephone.

Būklė: labai geros būklės (naudotas), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of target and actual values - Numerical input of target values - Error messages in plain text - RS 232 interface - Free switching channels for external specimen control Technical Specifications Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat emission: approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Nominal power: 8.8 kW Nominal current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Tjdjzg Ty Ijpfx Aa Dea Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information reserved!) If you have further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Espec Model: EGN28-6CWL Espec Water-cooled Temperature Temperature Test Chamber N Series Power Supply: AC 400 V 3-phase 50/60Hz 38A Temperature Range: -70 to +180°C Temperature Change Rate: Heating: 10 K/min Cooling: 5.5 K/min Todpfx Ajzg Tynea Doa Internal Dimensions (W x H x D in mm): 1000 x 1000 x 800 External Dimensions (W x H x D in mm): 1205 x 1920 x 2159 Usable Volume: 800 liters Refrigerant: R-404A Refrigerant: R-508A Weight: approx. 695 kg Important safety information for you as the buyer! The following steps are carried out on all chambers we offer before delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Būklė: geras (naudotas), Heraeus Vötsch Model: VTS 7034-5 Tsdpfxjzg Tp Ne Aa Dsa Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: width 580 mm, depth 765 mm, height 750 mm External dimensions: width 870 mm, depth 1595 mm, height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side cable entry: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R-404A and R-23 Weight: approx. 570 kg Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.

Būklė: geras (naudotas), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: width 580 mm, depth 765 mm, height 750 mm External dimensions: width 870 mm, depth 1595 mm, height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB(A) Side cable entry: 5.5 cm / 12.5 cm Tedpfx Ajzg Tp Asa Dsa Chamber is water-cooled Refrigerants: R-404A and R-23 Weight: approx. 570 kg Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone.