Suspausto Oro Variklis pirkti naudotą (26 996)

Būklė: naudotas, Pneumatic press, compressed air press BOSCH type Serial no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 mm Ram surface: Ø 45 mm Maximum installation height: 235 mm Pedpfxsh U Dtuj Acaspw Clamping shank bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force is infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic two-hand safety controls - Mounted on metal base frame with wooden panels Space requirements (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table substructure: 140 kg Good condition

Būklė: naudotas, Reciprocating Compressor KAESER Type EPC 630-250 Serial No. 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 litres/min. Intake capacity max.: 630 litres/min. Max. pressure: 10 bar Receiver volume: 250 litres Motor power: 3 kW Power supply: 400 Volt, 50 Hz (with 16 Amp plug) - 2 cylinders, oil-lubricated - Pressure switch set to 10 bar - Run-up time from 0 bar to cut-out pressure at 10 bar: 5 min Ppsdpfxjwypqro Acaew Dimensions (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Būklė: naudotas, Pneumatic Screwdriver, Air Screwdriver DESOUTTER Pneumatic screwdriver, inline screwdriver for assembly technology Model: SD 140-AR510-S4Q Torque range: 0.6–14.0 Nm Speed: max. 510 rpm Operating pressure: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Selector switch for forward/reverse operation (rotary ring control) - Without automatic shut-off - Pneumatic control line Ø 4 mm Ppsdpfx Aofgrrhjcasw - Pneumatic connection for screwdriver function min. Ø 10 mm - Aluminum bracket for handling device - Screw feed tube Ø 12 mm (internal diameter) Dimensions (L x W x H): 60 x 46 x 870 mm Weight: 2.8 kg Good condition 4 units available, price per screwdriver

Būklė: paruoštas naudoti (naudotas), Speed range up to: 12,000 rpm Power at 6 bar compressed air: 900 W Ppjdpfxjd Iatio Acaew Stroke length (extension length): 1,000 mm Thread outlet: 45° with collet: 6 mm

Būklė: naudotas, Single-column Air Hydraulic Press, Paul Anton Model PVT 2 Pneumatic Table Press, Embossing Press Serial No. 97148 Year of manufacture: approx. 1980 Pressing force: 10 tons Pedpfx Acjtrpiijaspw Throat depth: 100 mm Ram stroke: approx. 25 mm Ram surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very robust construction - Hydro-pneumatic press with air-to-oil pressure intensification - Pneumatic foot switch - Ram with internal M12 thread - Metal base Required space (L x W x H): 850 x 620 x 1560 mm Weight: approx. 200 kg Good condition

Būklė: naudotas, Compressed air - adsorption dryer, activated carbon adsorber with after-filter BOGE Type DAZ 5-2 For especially dry air Serial No. 38315449 Year of manufacture: 2013 Max. flow rate: 250 litres/min = 15 m³/h Max. operating pressure: 16 bar Connection thread: G 1/4" Ppedpfx Aovrkhkjcajw Power supply: 230 Volt, 50 Hz - Pre- and after-filter Required space (L x W x H): 400 x 210 x 580 mm Weight: 15 kg Good condition

Būklė: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, tūrio srautas: 0,85 m³/val, bendras plotis: 630 mm, bendras ilgis: 484 mm, bendras aukštis: 779 mm, bendras svoris: 80 kg, slėgio rasos taškas: 3 °C, įėjimo įtampa: 230 V, aplinkos temperatūra (maks.): 43 °C, aplinkos temperatūra (min.): 3 °C, aušinimo tipas: oras, galia: 0,29 kW (0,39 AG), įėjimo dažnis: 50 Hz, Įranga: Tipinė plokštelė prieinama, KAESER šaldymo džiovintuvas SECOTEC TA 8 – pagaminimo metai 2013 – ką tik aptarnautas Parduodamas patikimas šaldymo džiovintuvas TA 8, puikiai tinkantis suspausto oro paruošimui dirbtuvėse ar pramonėje. Džiovintuvas pagamintas 2013 m., neseniai buvo atliktas šviežias techninis aptarnavimas autorizuotame KAESER servise – techniškai tvarkingas ir paruoštas iškart naudoti. Techniniai duomenys: * Našumas: 0,85 m³/min * Slėgio rasos taškas: +3 °C * Slėgio diapazonas: 3–16 bar * Slėgio nuostoliai: 0,14 bar * Šaltnešis: R134a * Jungtis: G 3/4 * Maitinimas: 230 V / 1 fazė / 50 Hz * Aplinkos temperatūra: +3 °C iki +43 °C * Matmenys (P x G x A): 630 x 484 x 779 mm * Svoris: apie 80 kg Energijos sąnaudos: * 0,27 kW prie 100 % apkrovos * 0,15 kW prie 50 % apkrovos * 0,04 kW prie 10 % apkrovos Būklė: Naudotas, prižiūrėtas, pilnai veikiantis – po serviso labai geros būklės. Kaina su PVM, PVM išrašomas. Apžiūra galima susitarus. Susidomėjus prašome susisiekti! Psdpfxsy H Amys Acajpw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 23 511 h, Funkcionalumas: visiškai funkcionalus, Vandeniu aušinamas džiovintuvas Atlas Copco FD510, 30,60 m3/min. Pagaminimo metai: 2016. Pedox Sx U Dopfx Acaspw

Būklė: naudotas, Gamybos metai: 2020, mašinos/transporto priemonės numeris: 525, High-performance extractor for dusts, smoke, and chips Suction capacity: 7.58 m³/min Ppjdpfx Asp Sczbecaow Vacuum: 520 mbar Air consumption: 3.25 m³/min Suction port: DN 76 mm Suction hose: 5.5 m Collection container: 60 litres HEPA safety filter cartridge 2.2 m² – Dust class H Space requirements (L x W x H): 1,100 x 680 x 2,200 mm Weight: approx. 130 kg

Būklė: geras (naudotas), Suslėgto oro vamzdis / spaudiminė oro linija iš aliuminio Nurodyta kaina taikoma visiems suslėgto oro vamzdžiams kartu. Podpevv Nvnofx Acaspw Iš viso: apie 325 m vamzdžio Galimas dalinis pardavimas / atidavimas!

Gamybos metai: 2020, būklė: beveik kaip naujas (parodų įrenginys), Demonstration tool: SDT 200 ASD (ATEX) Ultrasonic Multifunction Detector Set. Includes: 1 x SDT 200 (ATEX) receiver with digital display (numeric) for static peak value detection, incl. battery pack Monitoring indicators for reliable diagnosis in wear monitoring: RMS, PEAK, and Crest Factor; integrated data logger for 4,000 measurements at 500 locations (grouped by sensor, date, and time) 1 x Charger 1 x Peltor headphones 130 dB 1 x Carrying strap 1 x Directional probe (screw tip & rubber tip) 1 x Plastic case with insert 1 x Operating manual on USB stick 1 x USB cable for data transfer Pjdpfepyg Sajx Acaepw 1 x Calibration certificate (as of 02/2020) 1 x Flexible sensor Atex 550 mm with interchangeable sensor head 1 x Spiral cable 1 x Funnel directional probe for SDT200 1 x Leakage tags 1,000 pcs. (for marking compressed air leaks) Other leak detection instruments available on request. Visit our store. We always have a wide selection of new and used compressors in stock!

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, new KAESER TB19 refrigerated compressed air dryer, equipped with energy-saving SECOTEC control system. With electronically controlled condensate drain. Year of manufacture: 2024 Podpjd S S T Defx Acaspw Technical data: Volume flow: 2.10 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +43°C Max. compressed air inlet temperature: +55°C Compressed air connection: G 1" Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 108 kg Electrical supply: 230 V / 1 / 50 Hz Visit our premises in Erlangen. On more than 450 sqm of exhibition space, you will find a wide selection of new and used compressors.

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: 1981, new KAESER TB26 refrigerated compressed air dryer with energy-saving SECOTEC control system. Equipped with electronically level-controlled condensate drain. The dryer is in stock and immediately available. Year of manufacture: 2022 Technical data: Volume flow: 2.55 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to +43°C Max. compressed air inlet temperature: +55°C Compressed air connection: G 1" Dimensions (W x D x H): 620 x 540 x 963 mm Weight: 116 kg Electrical supply: 230 V / 1 / 50 Hz Ppjdpfxeix Alij Acaow Visit our showroom in Erlangen. On more than 450 sqm of exhibition space, you will find a large selection of used and new compressors.

Gamybos metai: 2016, būklė: geras (naudotas), mašinos/transporto priemonės numeris: TR0069_ALM400, used Almig refrigerated dryer ALM 400 Year of manufacture: 2016 Ppedehu Sdhjpfx Acaow Technical data: Model: ALM 400 Medium: Compressed air, free of aggressive components Volume flow: 6.00 m³/min Operating pressure: 7 bar(g) Max. operating pressure: 16 bar(g) Inlet air temperature: 35 °C Max. inlet air temperature: 49 °C Ambient temperature: 25 °C Max. ambient temperature: 43 °C Min. ambient temperature: 4 °C Pressure dew point: +3 °C Compressed air connection: 2" Electrical power supply: 230 V ±10% / 1 phase + N + PE Frequency: 50 Hz Rated power: 1.30 kW Electrical protection rating: IP23 Sound level: 69 dB(A) Dimensions, weight Height: 761 mm Width: 483 mm Depth: 1011 mm Weight: 78 kg Performance data according to reference conditions in accordance with DIN ISO 7183-1 *Based on 20 °C and 1 bara at 7 bar(g) operating pressure, pressure dew point according to ISO 8573.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, New KAESER Compressed Air Receiver, 5000 Liters, Vertical Design, Galvanized 11 bar Incl. Pressure Gauge and Fitting Set Year of Manufacture: 2025 High-quality compressed air receiver in galvanized finish. Hot-dip galvanized inside and out according to DIN EN ISO 1461. Connection nozzles for tapered threads. Technical data: Volume: 5000 liters Max. Overpressure: 11 bar Diameter: 1400 mm Tank height: 3570 mm Weight: 1050 kg Compressed air inlet connection: 2x DN 100 Compressed air outlet connection: 2x DN 100 Safety valve connection: G 2" Pressure gauge set connection: G ½ Condensate drain connection: G 2½ Vessel approval: RL 2014/68/EU Service openings according to AD2000: 1x manhole Min. operating temperature: -10°C Max. operating temperature: +50°C Surface coating: galvanized Convenient leasing for new machines available through our in-house bank. Visit our showroom. Ppsdpfxjxt Rgfs Acaew We always have a large selection of new and used compressors in stock.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, tūrio srautas: 124 m³/val, Exhibition piece: RENNER RKT + 0125 Compressed Air Dryer with level-controlled condensate drain Year of manufacture: 2022 Volume flow: 2.08 m³/min (at 7 bar and ambient temperature of 25°C) Pressure dew point: 3°C Max. pressure: 16 bar Connection thread: G 1 1/4" Dimensions: Length: 345 mm Width: 525 mm Height: 851 mm Weight: 45 kg Pjdpfsu Iwc Rjx Acaepw Convenient leasing available for new machines through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock! Visit our premises in Erlangen. On more than 450 sqm of exhibition space, you will find a large number of used and new compressors.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 50 708 h, Funkcionalumas: visiškai funkcionalus, Suspausto oro džiovintuvas Atlas Copco FD1750+ Ppedpfjyr A Uyjx Acajw 14 bar 105 m3/min

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Atlas Copco FX13 suspausto oro džiovintuvas, 10,02 m³/min Pjdpfxjyrdifo Acaopw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Debus DDS 118 / 5/ 23 Chip Industrial Vacuum 6 bar 4.6 m³/min 278 Manufacturer: Debus Model: DDS 118 Full Name: DDS 118 / 5/ 23 Chip Year of Manufacture: 2016 Serial No.: 278 Operating Pressure: 6 bar Suction Capacity: 4.6 m³/min Air Consumption: 1.3 m³/min Weight: approx. 30 kg Tank Capacity: approx. 40 liters Dimensions: 55 cm long, 60 cm wide, and 150 cm high Condition: used Scope of delivery: see pictures Complete factory closure, large selection of mezzanine floors, pallet racking, shelving units, vertical carousels. Ppjdpjivd A Uofx Acajw High-quality industrial machinery, lathes, grinding machines, hand tools More items - new and used - can be found in our shop! International shipping costs on request!

Būklė: geras (naudotas), Mäder DLP 1700 HV Direct-acting Pneumatic Press Direct-acting pneumatic presses are used wherever constant pressing force is required over a longer stroke length or where a large insertion depth is needed: for example, for pressing in pins, bushings, and ball bearings, or for forming operations. DLP 1700 HV Direct-acting pneumatic press Pressing force at 6 bar: 17 kN Podpfx Acsd Tam Nsaopw Working stroke (H mm): 40/60/80 More items – new and used – can be found in our shop! International shipping costs available on request!

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 5 000 l, bendras plotis: 1 310 mm, bendras aukštis: 5 060 mm, bendras svoris: 649 kg, darbinis slėgis: 8 juosta, slėgis (maks.): 8 juosta, suslėgto oro jungtis: 8 juosta, slėgis: 8 juosta, temperatūra: −20 °C, We manufacture serial production pressure tanks in both horizontal and vertical configurations, offering a wide range of pressures and volumes in compliance with the Pressure Equipment Directive 2014/68/EU. This directive sets forth the requirements for the placing on the market of pressure equipment within the European Economic Area (EEA) and applies to equipment with a maximum pressure exceeding 0.5 bar above atmospheric pressure. The PED places a strong emphasis on product safety. Materials used in the construction of pressure equipment must meet stringent quality standards as specified by the directive. The design, fabrication, testing, and installation of the pressure equipment are carried out to ensure operational safety. Our pressure tanks serve numerous applications. Argon tanks, for instance, are used for welding alloyed and unalloyed steels, while nitrogen tanks are utilized in the pharmaceutical, electronics, gas, and oil industries. Air receiver tanks are used for storage and to reduce pulsation and air loss from compressors. Pressure tanks installed in compressor rooms also play a role in cooling compressed air and provide auxiliary functions, such as removing water and condensate from the air supply. Additionally, these tanks extend compressor service life by reducing running time. All pressure vessels manufactured by us bear the CE marking and come with complete documentation as required for commissioning approval by the Technical Inspection Authority. We design and manufacture pressure tanks for a broad range of industrial applications. Throughout every phase of cooperation—from initial inquiry and design intent to inspection and approval by relevant authorities—we provide comprehensive support from our team of engineers and certified inspectors of the designated body. Our portfolio includes tanks designed for use with various media: compressed air, oxygen, nitrogen, industrial gases, water, and bulk material containers for the medical and chemical sectors. We manufacture both horizontal and vertical tanks in a comprehensive range of pressures and volumes as per the Pressure Equipment Directive 2014/68/EU. With our in-house design office, we are able to implement custom and non-standard projects, for which we possess all the necessary competencies and authorizations. Ppedpfx Ajr En S Decaow

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 5 000 l, bendras plotis: 1 310 mm, bendras aukštis: 5 060 mm, bendras svoris: 794 kg, darbinis slėgis: 11 juosta, slėgis (maks.): 11 juosta, suslėgto oro jungtis: 11 juosta, slėgis: 11 juosta, temperatūra: −20 °C, The offered series of pressure tanks are manufactured by us in both horizontal and vertical orientation, available in a wide range of pressures and volumes, all in compliance with the Pressure Equipment Directive 2014/68/EU. This directive sets forth the requirements for pressure equipment placed on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure greater than 0.5 bar above atmospheric pressure. The PED places great emphasis on product safety. Materials used for the construction of pressure equipment must meet strict quality standards as outlined by the directive. Design, manufacture, inspection, and installation must all be carried out to ensure operational safety. Our pressure tanks serve a variety of applications. For example, argon tanks are used in welding alloyed and non-alloyed steels, while nitrogen tanks find uses in the pharmaceutical, electronics, gas, and oil industries. Compressed air receivers are used internally for air storage, pulsation dampening, and minimizing air loss produced by compressors. When installed in compressor rooms, pressure vessels also aid in cooling compressed air and assist in the removal of water and condensate, thereby playing a supporting role in air purification. Additionally, our tanks extend the service life of compressors by reducing their operating cycles. Psdpfor En Taox Acaepw All pressure equipment manufactured by us bear the CE mark and come with comprehensive documentation required for commissioning approval from the Technical Inspection Authority. We design and manufacture pressure tanks for industrial applications in the broadest sense. Throughout every stage of cooperation—from the initial inquiry, through design concept, up to acceptance by authorities—our engineering and inspection team from the notified body provides full support. We offer tanks designed for use with a variety of media: compressed air, oxygen, nitrogen, process gases, water, and bulk materials for the medical and chemical industries. Our tanks are manufactured both horizontally and vertically, across a wide spectrum of pressures and volumes, in full compliance with the Pressure Equipment Directive 2014/68/EU. We operate our own in-house design department, allowing the execution of custom and atypical projects, with all necessary approvals and certifications.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 5 000 l, bendras plotis: 1 310 mm, bendras aukštis: 5 060 mm, bendras svoris: 944 kg, darbinis slėgis: 14 juosta, slėgis (maks.): 14 juosta, suslėgto oro jungtis: 14 juosta, slėgis: 14 juosta, temperatūra: −20 °C, We manufacture the offered series pressure tanks in both horizontal and vertical configurations, available in a wide range of pressure ratings and volumes in compliance with the Pressure Equipment Directive 2014/68/EU. This directive specifies the requirements for pressure equipment placed on the market within the European Economic Area (EEA) and applies to pressure vessels operating at a maximum pressure exceeding 0.5 bar above atmospheric pressure. Ppjdpfxsr En Tte Acaow The PED (Pressure Equipment Directive) places the highest priority on product safety. All materials used in the construction of pressure equipment must meet strict quality standards as stipulated by the directive. Design, manufacturing, inspection, and installation processes are carried out to ensure maximum safety. Pressure tanks serve a variety of applications. For example, argon tanks are used for welding alloyed and unalloyed steels, while nitrogen tanks are applied in the pharmaceutical, electronics, gas, and oil industries. Compressed air tanks are typically used for storing and minimizing pulsation and air loss from compressors. When installed in compressor rooms, pressure vessels also aid in cooling compressed air and support the removal of moisture and condensate, thereby extending the service life of compressors by reducing their operating hours. All pressure equipment we produce features CE marking and comes with complete documentation, as required for commissioning approval by the Technical Supervision Authority. We design and manufacture pressure tanks for a broad range of industrial applications. At every stage of cooperation—from inquiry to design intent and approval by the supervisory authority after manufacturing—we provide support from our team of engineers and inspectors accredited as a notified body. Our tanks are suitable for use with a variety of media, including compressed air, oxygen, nitrogen, industrial gases, water, and as bulk material containers for the medical and chemical sectors. We manufacture both horizontal and vertical tanks in a wide range of pressures and volumes, fully in accordance with the Pressure Equipment Directive 2014/68/EU. Our in-house design office enables us to undertake custom and non-standard projects with the requisite authority and competence.

Būklė: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: ITJ214062, įėjimo įtampa: 400 V, slėgis (maks.): 13 juosta, KOMPRESUOTO ORO DŽIOVYKLĖ ATLAS COPCO MOD. FX13 - 3 KW - 13 BAR - ATITINKA CE STANDARTUS - NAUDOTAS - Įtampa: 400/50 - Serijos nr.: ITJ214062 - Metai: 2018 *i8 - PILNAI SU VARTOTOJO VADOVU IR CE DEKLARACIJA Ppjdpfx Asx Rbnwocasw

Būklė: geras (naudotas), Gamybos metai: 2003, mašinos/transporto priemonės numeris: 3101, Kaeser TD51 Chladící sušička stlačeného vzduchu Sériové číslo: 3101 Pedoqqhkpjpfx Acaopw Rok výroby: 2003, chladivo R134A, pracovní tlak 18 bar