Sunkvežimių Ratų Plovimo Sistema pirkti naudotą (44 275)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2017, UNION CM10 SP TWIN Cpsdpfx Aaor Duq Uehjw Double-chamber unit: Washing chamber no. 1 and cooling chamber no. 2, both equipped with three pneumatic doors. Throughfeed type: baskets are loaded from one side and unloaded from the opposite side, performing the complete cycle. Parts are loaded using a mobile trolley on the washing chamber side, transferred automatically through the cooling chamber, and then unloaded from the cooling chamber side. • Automatic transfer between chambers via transfer mechanism. • Basket rotation with safety clutch. • Can accommodate a basket with ø1060mm, useful internal diameter 980mm. • Useful internal height 1000 mm / Max load capacity: 500 kg. • Washing tank: 280 L, with level control and axial INOX stainless steel wash pump. • Dosatron soap dispenser for washing tank: 3-10% dosage. • Rinsing tank: 250 L, with level control and axial INOX stainless steel wash pump. • System constructed in AISI 304 stainless steel (except for safety containment tray, external frames, and exterior paneling—painted carbon steel). • Safety containment tray at the base of the unit. • Full thermal insulation. • Two external trolleys with drip trays + two baskets ø1060mm, useful internal diameter 980mm. • Automatic doors with safety light barriers. • Three bag filters (two for washing 25 micron, one for rinsing 10 micron). • "Union DC60" oil separator. • High-pressure blower, side-positioned air knife. • Drying fan with electric heating elements. • Steam extractor. • Drainage pump. • Two cooling fans. (Water chiller NOT included in the offer.) • SIEMENS S7-1200 PLC with KTP 700 BASIC touch panel + Gate Manager for remote support.

Būklė: naujas, Gamybos metai: 2024, SM11 Spray Cleaning System Cpsdpfx Aaerwmyhjhjw Standard equipment includes: - Single washing tank. - Basket movement via gearmotor. - Timer for setting washing duration. - Electrically adjustable heating. - Stainless steel wash pump. - Removable coarse filter in the tank. - Electronic control for correct lid closure. - Level sensor / protection for low liquid level. - Tank discharge with ball valve for bath changeover. Available in various configurations with: - Complete system thermal insulation. - 50-100 micron bag filter. - Steam extractor. - Drying unit with fan and electric heating elements. - Drying with high-pressure blower and air knife. - Oil separator. - Automatic water filling. - Drain pump. Technical specifications: - Basket diameter: ø1100 mm. - Useful internal height: 700 mm. - Maximum allowable load: 250 Kg. - Tank capacity: 260 l.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis slėgis: 170 juosta, tuščias svoris: 130 kg, įėjimo įtampa: 400 V, garantijos trukmė: 6 mėnesiai, The Kärcher HDS 695 M Eco high-pressure cleaner is a highly efficient machine, suitable even for the toughest jobs in large-scale installations. During comprehensive inspection and refurbishment, our service team thoroughly checked all functions of the machine. All mechanical components showing wear and tear were replaced with new ones, including ceramic pistons, seals, bearings, and all O-rings. This ensures long-lasting, trouble-free operation without the need for further investment in the future. Product Advantages: - The unit comes with new accessories, including a gun from the renowned German brand R+M, stainless steel lance, steel-braided hose, and a 25° power nozzle. - A robust brass head with new ceramic pistons and seals guarantees extended, fault-free use. - The powerful and efficient 3-phase motor delivers excellent performance. - Thanks to its operational parameters of 170 bar and 800 l/h, this machine can be effectively used for heavy-duty tasks in construction, logistics, and agriculture. - Every machine we offer is presented with individually taken photographs; you buy exactly the device you see. Technical Data: - Supply voltage [V]: 400 ~ 3 phase Cpodpeymkudofx Aahew - Pump capacity [l/h]: 800 - Working pressure [bar]: 170 - Max. heating temperature [°C]: 85 / 155 - Connected load [kW]: 5.9 - Hose length [m]: 10 - Fuel tank [l]: 25 - Chemical tank [l]: 20 - Weight [kg]: 130 Equipment: - NEW pressure gun from German brand R+M - NEW 900mm stainless steel lance - NEW reinforced 10m steel-braided hose - NEW 25° power nozzle - Water filter and GEKA connector are included free of charge in the set.

Būklė: naudotas, The plant is suitable for the agglomeration of thermoplastic films and fibers. Throughput, depending on the material, is between 500 kg – 1000 kg/h. The plant consists of: • Feed conveyor • Load-dependent control for the feed conveyor • Metal detector coil • HERBOLD granulator type SMS 45/100-H5-3 • Pneumatic material transport to the storage silo • Plastcompactor unit HV-70, consisting of feed screw from the storage silo, plastcompactor, central blower, and cooling circuit • HERBOLD secondary granulator type SML 45/100-S4-2 • Intensive cooling • Conveying blower SZS II 630/200 Codpfoxgtqmsx Aahspw • Screening machine • Undersize material return to the compactor silo • Material transfer system type MFT with Big Bag station and automatic diverter to on-site silo • Automatic exhaust air filter • Electrical control panel • Compressor.

Būklė: naudotas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HD 7/16-4ST + HWE 860, This listing is for a Kärcher high-pressure cleaner HD 7/16-4 ST in combination with a Kärcher hot water generator HWE 860 (stationary unit). The equipment has been inspected in our in-house specialist workshop and is fully functional. High-Pressure Cleaner HD 7/16-4 ST / HWE 860 Kärcher Hot Water Generator Cpsdjymdm Topfx Aahjw Product Description: HD 7/16-4 ST With an operating pressure of 160 bar, the pre-configured cold water high-pressure cleaner HD 7/16-4 ST is an entry-level model within our range of stationary high-pressure cleaners designed for single-lance operation. Our pre-configured cold water high-pressure cleaner HD 7/16-4 ST offers a wide array of features and numerous options for individual upgrades. A dry-run protection system and an operating hours counter are included as standard. Additionally, it allows for the suction of one or two detergents at either high or low pressure, and thanks to the extensive accessory package (see photos), it can be optimally tailored to the intended application site. Delivering 160 bar working pressure, the high-pressure cleaner provides ample power to handle even the most demanding cleaning tasks. The operator also benefits from Kärcher innovations such as the EASY!Force high-pressure gun, which utilizes the recoil force of the high-pressure jet to reduce the holding force to zero, and the EASY!Lock quick couplings, which enable handling up to five times faster than conventional screw connections, with no compromise in robustness or longevity. Kärcher Electric Hot Water Generator HWE 860: The HWE 860 electric hot water generator is used in conjunction with the HD 7/16-4 ST high-pressure cleaner and heats the water up to 85°C. Equipment requires training for operation. Description: HWE 860 Kärcher Hot Water/High-Performance Heater The electric hot water generator boasts a 24 kW output. Its use is recommended wherever burner exhaust management is problematic or not permitted. The maximum temperature is 85°C, regulated by a thermostat. The unit can be operated manually or automatically. The device is operated in combination with a high-pressure cleaner. The hot water generator is supplied as a standalone unit, complete with control cabinet and all necessary components (hoses, cables, clamps, etc.). Optionally, the user can select between cold and hot water operation via two solenoid valves, and, during configuration, a digital timer can also be selected. The unit can also be used as a continuous-flow water heater – for example, in continuous operation: at a flow rate of 700 l/h and an inlet temperature of 15°C, a temperature of 45°C is reached (a temperature increase of 30°C). TECHNICAL DATA FOR BOTH UNITS SEE NAMEPLATES. FOR FURTHER PRODUCT INFORMATION REGARDING: HIGH-PRESSURE CLEANER HD 7/16-4 ST HOT WATER GENERATOR HWE 860 WE RECOMMEND CONSULTING THE MANUFACTURER, KÄRCHER. Subject to change and errors. Do you have any questions, require advice, or would like to view the equipment on-site? You can reach us by phone during our business hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is conducted exclusively under our general terms and conditions (GTC).

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis slėgis: 170 juosta, tuščias svoris: 130 kg, įėjimo įtampa: 400 V, garantijos trukmė: 6 mėnesiai, temperatūra: 155 °C, The Kärcher HDS 695 M Eco high-pressure cleaner is a highly efficient machine, suitable even for the toughest jobs in large-scale installations. During comprehensive inspection and refurbishment, our service team thoroughly checked all functions of the machine. All mechanical components showing wear and tear were replaced with new ones, including ceramic pistons, seals, bearings, and all O-rings. This ensures long-lasting, trouble-free operation without the need for further investment in the future. Product Advantages: - The unit comes with new accessories, including a gun from the renowned German brand R+M, stainless steel lance, steel-braided hose, and a 25° power nozzle. - A robust brass head with new ceramic pistons and seals guarantees extended, fault-free use. - The powerful and efficient 3-phase motor delivers excellent performance. - Thanks to its operational parameters of 170 bar and 800 l/h, this machine can be effectively used for heavy-duty tasks in construction, logistics, and agriculture. - Every machine we offer is presented with individually taken photographs; you buy exactly the device you see. Technical Data: - Supply voltage [V]: 400 ~ 3 phase - Pump capacity [l/h]: 800 - Working pressure [bar]: 170 - Max. heating temperature [°C]: 85 / 155 - Connected load [kW]: 5.9 - Hose length [m]: 10 - Fuel tank [l]: 25 - Chemical tank [l]: 20 - Weight [kg]: 130 Equipment: Cpedpfx Asyifgqoahow - NEW pressure gun from German brand R+M - NEW 900mm stainless steel lance - NEW reinforced 10m steel-braided hose - NEW 25° power nozzle - Water filter and GEKA connector are included free of charge in the set.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: A00.5392, bendras ilgis: 10 600 mm, bendras plotis: 2 680 mm, bendras aukštis: 3 190 mm, įėjimo įtampa: 230 V, galia: 45 kW (61,18 AG), Markert nuolatinio veikimo plovimo įrenginys detalių plovimui ir džiovinimui (pvz., metalinių detalių valymui) - Pilnai veikiantis - Pagaminimo metai: 2000 Cpjdpfx Aoxb Dcvoahew - Skirtas detalių plovimui krepšiuose - Naudojant šarmines arba neutralias plovimo priemones - Džiovinimas cirkuliuojančiu oru, 20°C temperatūroje - Ištraukiamas oras garų kondensatoriumi (4500 m³/h) Komplektacijoje: 3 segtuvai su technine dokumentacija, naudojimo instrukcijomis, brėžiniais ir kt. (viskas iš gamintojo Markert) Prašome pateikti savo kainos pasiūlymą už šią įrangą.

Būklė: geras (naudotas), Gamybos metai: 2009, Dulkių ištraukimo ventiliatorius, ištraukimas, dulkių ventiliatorius, ištraukimo įrenginys, dulkių ventiliatorius, dulkių ištraukimo prietaisas, atskirtuvas, suvirinimo dūmų filtras, suvirinimo dūmų ištraukimas, dūmų traukos ventiliatorius, filtrų sistema, kasetinis dulkių šalinimo įrenginys, kasetinių filtrų įrenginys, kasetinis filtras Cjdeyh Hp Rjpfx Aahjpw - Filtrų sistema: su vibruokliu - Tipas: TMS 8/10 - Filtravimo plotas: 8,5 m² - Vibruoklio variklis: variklio galia 0,06 kW - Įvado jungtis: Ø 200 mm - Išvado jungtis: Ø 300 mm - Matmenys: 1070/680/H2530 mm - Svoris: 243 kg

Būklė: paruoštas naudoti (naudotas), Migatronic MTE 440 TIG AC / DC welding machine for steel and aluminium. Water cooling unit: Migatronic CTU 3000. The maximum welding current is 440 A. Codpfx Aajh Ib Idohjpw Tested by EWM Service. You are welcome to schedule a viewing appointment. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. If you have any questions, please feel free to contact us by phone. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description of the products only. Deviations from technical specifications and errors in the item description may occur and are reserved. Shipping is exclusively to businesses – for private consumers, collection is the only option.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Manufacturer BRINOX d.o.o. Project Number B-0001113-LEP2.3 LEP 2.3 KK6762 Package 9 Module M024 Product Description LEP2.3 – Washing Solution Tempering Unit Serial Number 1003572 Equipment Number 20022782 Tag Number MR-INH-VPR61-KK6762 Year of Manufacture 2020 Technical Data System Type Pharma tempering skid for precise temperature control of washing and elution solutions. Constructed as a compact, multi-level stainless steel frame with fully integrated pump, heat exchanger, and valve technology. Dimensions Length: 1920 mm Width: 1365 mm Height: 1840 mm Design Fully pre-assembled, insulated tempering skid Pharmaceutical-grade construction in accordance with GMP requirements Industrial stainless steel frame construction Materials Product-contact parts: Stainless steel 1.4435 / 1.4571 Frame construction: Stainless steel 1.4301 Welding in accordance with EN ISO 13920 D Insulation Completely insulated piping and apparatus Closed-cell high-performance insulation with black protective jacket Main Components PU1021 Process Pump PU9203 Cooling Medium Pump WT1001 Plate Heat Exchanger WT1011 Finned Tube Heat Exchanger BH9701 Expansion Vessel Pneumatic Control Valves GEMÜ Stainless Steel Ball Valves Pressure Transmitter Temperature Measuring Points Pressure Gauge Electrical Terminal Box with Warning Labeling Stainless Steel Cable Trays Media Chilled Brine, Supply/Return Washing Solution Process Medium Control Air 6 bar All media connections are factory-sealed and packed for safe transport. Leak Testing Performed as pressure tests with compressed air. DP-01 Medium: Compressed Air Test Pressure: 3.15 bar Pressure Drop: 0.13 bar Date: 27.07.2020 Result: Passed DP-02 Medium: Compressed Air Test Pressure: 3.28 bar Pressure Drop: 0.07 bar Date: 26.07.2020 Result: Passed Pressure hold time: 1 hour each No leaks detected Calibration Certificates Calibration Laboratory: LOTRIČ Metrology Certificates in accordance with EN ISO/IEC 17025 Measuring Ranges: –1 to 20 bar and 0 to 10 bar Calibration performed Scope of Documentation FAT plan and report Deviation form Layout drawing inspection Maintenance inspection P&ID Leak test Calibration certificates 2.1 Factory Certificate EN10204 Material list As-built isometric drawing Complete turn-over package Inspection Status FAT performed Pressure test passed Calibrations available PED-compliant design Complete pharmaceutical documentation Application Temperature control of washing and elution solutions in biopharmaceutical production plants Suitable for GMP environments Codpfx Aajyl Iwtehopw Condition New system Originally packed Unused Year of manufacture: 2020 Factory condition Fully documented Immediately available

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Manufacturer: BRINOX Type: LEP2.3 – Washing Solution Temperature Control Unit Year of construction: 2020 Serial number: 1003507 LEP2.3 KK6761 Package 8 Tag No.: MR-INH-VPR61-KK6761 Equipment No.: 20023781 Technical Data System type: Temperature control unit / heating and cooling module for washing solution (CIP or process washing system) Design: Compact, fully pre-assembled skid unit with robust stainless steel frame construction, craneable via integrated lifting points. Frame and Construction: Welded stainless steel industrial frame, free-standing, multi-level piping arrangement for optimal space utilization. Maintenance-friendly accessibility from multiple sides. Integrated cable trays. Piping: Stainless steel process piping in hygienic design, welded and partially flanged. Multilayer thermal insulation for main lines and equipment. Integrated drain and vent fittings. Valve Technology: Several manual ball valves (GEMÜ) in main and bypass lines. Pneumatically actuated control and shut-off valves for automatic temperature regulation. Diaphragm and control valves integrated in heating and cooling circuits. Measurement and Control Technology: Temperature measuring points in supply and return lines. Pressure sensors in the process line. Integrated flow measurement. Electrical junction box with protective labelling. Automatic temperature control via pneumatic control valve. Heat Exchanger: Cylindrical stainless steel heat exchanger, insulated and integrated into the piping system. Designed for controlled heating and/or cooling of the washing solution in a closed circuit. Pump Technology: Two electrically driven centrifugal pumps with red lacquered motors for process recirculation within the temperature control unit. Electrical: Electrical junction box with warning label. Wired sensors and actuators. Prepared for integration into an overriding control or process control system. Application The unit is used for precise temperature control of a washing solution within a pharmaceutical or biotechnological process system. Typical areas of application include CIP systems, wash stations for production equipment, and temperature-controlled cleaning processes in pharmaceutical and biotechnological industries. The washing solution is circulated in a closed loop via pumps, temperature controlled by the integrated heat exchanger, and continuously monitored by sensors. Temperature regulation is automatic via pneumatic control valves for precise adherence to defined setpoints. Cedpfxjyl It Is Aahspw Construction Compact modular skid design with fully insulated main lines. Stainless steel surfaces in hygienic industrial finish. Clear media routing and structured piping layout. Crane-transportable via integrated lifting points. Condition Year of construction: 2020. Very good visual and technical condition. Professional execution for pharmaceutical plant engineering. FAT / Documentation Typically supplied with CE conformity, factory acceptance test (FAT), and technical documentation including P&ID diagrams and material certificates for product-contact components. Special Features Fully insulated temperature control module in a compact design with high power density. Premium valve technology (GEMÜ). Multiple integrated measuring and control points. Suitable for validated pharmaceutical processes. Industrial pre-assembled skid solution with clearly structured media flow.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Manufacturer: BRINOX Type: LEP 2.3 – Wash Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003561 Tag Number: MR-INH-VPR61-KK6751 Equipment Number: 20022779 Location: Germany Condition: New, unused, original packaging Technical Data System Type: Wash Solution Temperature Control Unit (Temperature Control Skid) Design: Compact, pre-assembled skid unit in stainless steel frame Csdpfxeyl Ib Ej Aahspw Frame Material: Stainless steel Insulation: Completely insulated piping and components Pumps: Two circulation pumps with electric motor Stainless steel pump housing Inline configuration Heat Exchanger: Integrated stainless steel heat exchanger Shell-and-tube design Valves: Multiple GEMÜ ball valves Stainless steel valves Pneumatic control valves Safety valves Measuring Technology: Pressure transmitter Pressure gauges Temperature measuring points Integrated flow measurement Electrics: Integrated control cabinet/terminal box Wired ready for connection Industrial standard components Piping: Stainless steel process piping Fully insulated Flange and clamp connections Transport: Forklift and crane compatible Robust stainless steel base frame Application The temperature control unit is designed for controlled thermal management of a wash solution within pharmaceutical or chemical processes. Suitable for CIP and washing processes, pharmaceutical production lines, chemical process plants as well as temperature-regulated media circuits. Construction Compact, modular skid design Pre-assembled and ready for connection High-quality stainless steel fabrication Industrial-grade components, including GEMÜ valves Service-friendly construction Condition New system Never commissioned Original packaging Directly from manufacturer’s project Immediately available FAT and Documentation Status Technical documentation available Project documentation available Drawings available P&ID available Component lists available Operating manual available Key Features Completely insulated process piping High-quality stainless steel design Industrial brand components Ideal for new projects or as a replacement/redundancy unit Immediate integration possible

Būklė: naudotas, Gamybos metai: 2009, Overview This complete compressed air system was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The system includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD refrigerated air dryer, and one Donaldson UFA-AC0016 oil separator. Designed for dependable and energy-efficient air supply up to 8.5 bar, this setup is ideally suited for continuous production environments. The system has been serviced regularly, with the most recent full maintenance completed in August 2025, and is in good operational condition. The entire system remains installed and connected, and is immediately available for inspection and sale. Technical Data Year of manufacture: 2009 – 2013 Application: Industrial compressed air system Total capacity: 2 × 24.1 m³/min Max. pressure: 8.5 bar Cpsdpfx Aaoxrc Acjhow Power consumption: 274.8 kW Scope of Supply: Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Refrigerated air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: ribota funkcionalumas, Naudota Weber lakštų briaunų nuėmimo mašina su ištraukimo sistema Gamintojas: Weber Cpjdpfxoyi H E Ds Aahjw Modelis: BLC 1P 1100 Metai: 2007 1 x šlifavimo agregatas + 1 x šepečio agregatas Komplekte ištraukimo sistema su vamzdynu Šepečio agregato aukščio reguliavimas kartais kelia problemų arba keičiasi savaime. Rekomenduojama patikrinti aukščio reguliavimo daviklį. Jutiklinis ekranas kartais sunkiai reaguoja. Visa kita informacija telefonu.

Būklė: geras (naudotas), Brüel & Kjær Vibration Test System 4812 + 4801 Shaker Technical Specifications – Exciter Head 4812 • Max. Dynamic Force: 445 N (100 lbf) with Body 4801 • Current Consumption: 23 A RMS with cooling / 11.5 A without • Resonance Frequency: 7.2 kHz • Stroke: 12.7 mm continuous / 14 mm max • Acceleration Limit: 981 m/s² • Bolt Torque Limit: 3.4 Nm • Dimensions: Ø 235 mm × 178 mm • Weight: 8 kg • Material: Hard-anodized aluminum Technical Specifications – Exciter Body 4801 • Power Supply: 380 V ±10 % or 440 V ±10 %, 3-phase, 50 Hz • Cooling: Air-cooled (integrated fan) • Installation Height (without Head): 370–405 mm • Additional Height with Head: +50 to +130 mm • Weight: 75–80 kg Description & Application: Condition: Used (see images). Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Cpsdsxlz Uwopfx Aahew Financing through our bank is also available. komplett-konzept.leasingo.de You will find further new and used items in our shop! International shipping costs on request!

Gamybos metai: 2026, būklė: naujas, Fruit and Vegetable Washing System. The unit is constructed entirely from stainless steel. It features a sorting grid, a washing tank, and a conveyor belt. Produce drops into the water for initial cleaning. After pre-washing, the conveyor transports the fruit for further thorough cleaning with fresh water. The washed produce is then fed into the mill, where interchangeable sieves allow you to achieve the required mash consistency. The system is fitted with a dosing attachment suitable for pack presses. Technical Data: • Rated capacity: 1,500 kg/h • Power requirements: 3 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L/shift • Water consumption: 12 L/min • Water connection: 3/4" quick coupling • IP65 electrical control panel • Swivelling grating mill • Equipped with lockable castors • Easy to clean Cpjdstu Ikcjpfx Aahew • Conveying capacity can be precisely adjusted via frequency inverter Dimensions: Length: 3,250 mm Width: 840 mm Height: 2,270 mm Weight: 200 kg

Būklė: naudotas, Gamybos metai: 2021, bendras aukštis: 1 800 mm, bendras ilgis: 1 200 mm, bendras plotis: 1 000 mm, bendras svoris: 150 kg, žarnos ilgis: 10 000 mm, reikalingas aukštis: 1 800 mm, vietos reikalavimas ilgis: 1 200 mm, reikalingas plotis: 1 000 mm, transporto ilgis: 1 200 mm, transporto plotis: 1 000 mm, transporto aukštis: 1 800 mm, bakelio talpa: 50 l, No. 04521 ESTA ZA 50 Cyclone Pre-Separator Unused, year of manufacture 2021, in mint condition Pre-filtration for high dust volumes The stationary cyclone pre-separators are installed before the main filter unit and are designed for the pre-separation of dry, free-flowing dusts. Medium and coarse dust particles are already separated in advance, so only fine dusts need to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% for a median particle size of at least 150 microns. Cyclone diameter (top): 282 mm Cyclone height: 1,458 mm Dust container: 50 litres Connection pipe diameter (top): 50 mm Connection pipe diameter at container: 82 mm Includes approx. 10 m extraction hose, diameter 50 mm Transport dimensions approx. 1,200 x 1,000 x 1,800 mm (L x W x H) Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended after prior arrangement. Sale is as-is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty on used machinery; sold “as seen” Payment terms: Prices are plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex stock Codpfxjx Upqhs Aahjpw

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: PRTC-1500C, bendras ilgis: 2 800 mm, bendras plotis: 1 050 mm, bendras aukštis: 1 650 mm, garantijos trukmė: 12 mėnesiai, bendras svoris: 950 kg, įėjimo įtampa: 380 V, galia: 6 kW (8,16 AG), 45 m³ vakuuminis siurblys Csdpfjydlk Uox Aahepw 2 AG aušinimo sistema KR373 reduktorinis variklis 7'' HNC valdymo pultas PLC valdymas Pilnas nerūdijančio plieno korpusas 1050x2800x1650 mm 950 kg

Būklė: labai geros būklės (naudotas), Buderus 455 kW. Alyva kūrenama avarinė šildymo sistema. Žematemperatūris katilas, taip pat gali būti naudojamas su biogazo degikliu. Cpedex U Exuepfx Aahew

Būklė: naudotas, Specifikacijos Ilmvac modelis: LVS 105 T-10 ef Laisvas oro srautas, l/min. 60/50 Hz: 20 / 17 Galutinė vakuumo vertė, torr: 1,5 Maksimalus vakuumas, in. Hg: 29,86 Cpedpfxjxx Na Ue Aahew Reikalinga žarna, vidinis diametras (mm): 1/4 (7) Svoris, lbs (kg): 21 (9,5) Galia (kW): 0,83 Įėjimo įtampa / dažnis: 90V – 260V, 50/60 Hz Geros darbinės būklės. Peržiūrėkite ir kitus mūsų skelbimus.

Būklė: naujas, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✈️ Shipping available: 35-day delivery ✈️ ✅✅✅Energy efficiency class A+++✅✅✅ Complete Starter Package - MiniPB €25,126 EXCL. VAT & SHIPPING* ►►Buy Now◄◄ ✳️Maintain your liquidity! We offer a wide range of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, extended warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton’s 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Powder oven + powder booth + powder coating gun Everything you need for coating small parts, such as rims: - ELECLINE 12-1519 CURING OVEN (electric) - BOOTHLINE-1200 FL SPRAY BOOTH (with filter) - STRONG SMART MULTICOLOR POWDER COATING UNIT WITH SPARE PARTS - TRANSPORT TROLLEY FOR CURING OVEN ⭐ Powder oven with electric heating - ELECLINE 12-1519 ✔️ Internal dimensions: 1500 mm L x 1200 mm W x 1570 mm H ✔️ Volume: 2.9m³ ✔️ Electric heating power: 18 Kw/h ✔️ Recirculation air flow capacity (fan): 3,300 [m³/h] ✔️ Recirculation fan power: 0.75 [kW/h] ✔️ Digital temperature control, infinitely adjustable up to 220°C ✔️ Sandwich panels: Interior 1 mm galvanized steel, exterior 1 mm powder-coated steel ✔️ Adjustable air outlets and air circulation channels for homogeneous air distribution ✔️ Adjustable curing temperature, curing time, and exhaust fan operation ✔️ Audible signal at end of curing cycle ✔️ Insulated door with special locking systems ✔️ Insulation: 140 mm rock wool. Walls: 140 mm (50 mm rock wool + 100 mm fiberglass) ✔️ Heating type: Indirect heating ⭐ Powder booth – BOOTHLINE1200-FL ✔️ Internal dimensions: 1130 mm L x 1250 mm W x 1450 mm H ✔️ 2 flanged polyester filters ✔️ Filter dimensions: Ø325 x 1000 mm ✔️ Automatic filter cleaning system (adjustable interval) ✔️ Powder collection drawer ✔️ 360° rotating and mobile hanging system ✔️ 1 pc 2.2 kW extraction fan – 4500 m³/h Cpedsd S Nd Dopfx Aahew ⭐ Powder coating gun – STRONG SMART MULTICOLOR Effortlessly coat all powder colors and complex geometries with high efficiency and quality—even in challenging environments. This gun set features a housing with a stronger, more robust design. Looking for a custom configuration? ❗ Call us now! ❗ ✅WE OFFER CUSTOM SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, MANUFACTURE, AND INSTALL SPECIFICALLY FOR YOUR NEEDS.✅ ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE certified, and necessary machines also come with ATEX certification.☀️

Būklė: paruoštas naudoti (naudotas), Merkle W 420 AC/DC TIG Insquare Welding Machine Welding System Please refer to image no. 2 for technical specifications. You are welcome to visit for an inspection. We are happy to organize an affordable shipping service for you! Cpodpfxou Hg Aqj Aahsw You will receive a proper invoice. Net invoices can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and have a look at our other offers as well. The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Būklė: labai geros būklės (naudotas), Here we offer you a mytron temperature control system TS 1800. mytron Temperature Control System TS 1800 400V 3N, 50Hz, 3x35 AT Weight: approx. 920 kg Type: TS 1800 Csdpfx Aaed Huqhehepw Condition: used Scope of delivery: (See picture) (Technical data and information are subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), RS Simulators Type: ST2K320/45 Water-cooled shock test system Operating climate range Temperatures in upper test chamber: Temperature range: +40 °C to +180 °C Temperatures in lower test chamber: Cpjdpfxstqcu Eo Aahew Temperature range: -40 °C to +100 °C Ambient temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber weight: approx. 850 kg Important safety information for you as a buyer! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors. Specifications may vary!) If you have any further questions, we will be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), RS. Simulators Model: ST2K320/45 K Shock Test System, Water-Cooled Temperatures in the Upper Test Chamber Temperature Range: +40 °C to +180 °C Temporal Deviation: ±0.8 K according to DIN 50011 with an empty test chamber Cpsdpfx Ajtrf Uloahew Temperatures in the Lower Test Chamber Temperature Range: -40 °C to +100 °C Temporal Deviation: ±0.8 K according to DIN 50011 with an empty test chamber Humidity Levels in the Upper Test Chamber Climatic Temperature Range: +40 °C to +90 °C Humidity Range: 20% to 98% (±2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating Climate Range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test Chamber Dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical Power Supply: Total Power: 13 kVA Current Consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber Weight: approx. 950 kg Important Safety Information for Buyers: The following checks and services are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak testing with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data may be subject to change and errors!) For further questions, we are happy to assist you by phone.