Sun Pdl 5000 pirkti naudotą (11 189)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 350 mm, tekinimo skersmuo virš slankiojančio stalo: 1 350 mm, tekinimo skersmuo virš viršutinio vežimo: 1 000 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 7 500 mm, bendras plotis: 2 130 mm, bendras aukštis: 1 550 mm, sukimosi greitis (maks.): 630 aps./min, sukimosi greitis (min.): 5 aps./min, ruošinio svoris (maks.): 11 000 kg, veleno tvirtinimas: MK 6, The PORĘBA TR-135B1/5M universal lathe has undergone a comprehensive general overhaul and has been fully modernized by us. It features technical specifications that correspond to the technical and operational documentation of a brand-new machine, meets the technical acceptance requirements of the WOT and the Polish standard, and also fulfills EU requirements (CE Declaration of Conformity). The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, ready for technical acceptance. Technical data: - Centre distance / Turning length: 5000 mm - Swing over bed: 1350 mm - Swing over carriage: 1000 mm - Swing in bridge gap: 1650 mm - Spindle bore diameter: 120 mm - Power drive for the top slide cross-feed for taper turning up to 450 mm in length, 90° scale - Maximum workpiece weight between centres: 8,000 kg - Maximum workpiece weight between centres + 1 steady rest: 10,000 kg - Maximum workpiece weight between centres + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (RPM): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 22/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 7500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 13,200 kg Lhodpsva Elaefx Ah Usg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder, chip trays Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 350 mm, tekinimo skersmuo virš slankiojančio stalo: 1 350 mm, tekinimo skersmuo virš viršutinio vežimo: 1 000 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 7 500 mm, bendras plotis: 2 130 mm, bendras aukštis: 1 550 mm, veleno greitis (maks.): 630 aps./min, veleno greitis (min.): 5 aps./min, bendras svoris: 12 900 kg, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-135B2/5M has been comprehensively rebuilt and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, complies with the technical acceptance conditions of WOT and the Polish standard, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Refurbishment on order, delivery time 3.5 months from order placement Technical data: - Centre distance/turning length: 5,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm Lhjdei Apilopfx Ah Usg - Swing in gap: 1,650 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centres: 9,000 kg - Maximum workpiece weight between centres + 1 steady rest: 12,000 kg - Maximum workpiece weight between faceplates + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27 / 41 kW (1st / 2nd gear) - Overall dimensions: - Total length: 7,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 12,900 kg Standard equipment: tailstock, coolant pump, chuck guard, tool post Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post

Būklė: beveik kaip naujas (naudotas), lentynos aukštis: 7 800 mm, Used Meta frames for sale. Frame dimensions: - Length: 7800 mm - Depth: 1100 mm Price per unit: €170 plus VAT Available quantity: 150 Racking Systems | Sales • Assembly • Disassembly • Repair | MM Lagertechnik We are happy to provide you with a non-binding quotation tailored to your specific requirements. Our services: Lhodpfx Ahsy Itvze Ueg ✔ Sale of warehouse racking ✔ Assembly & disassembly ✔ Repair & maintenance ✔ Purchase of used racking systems ✔ Rack inspections according to regulations ✔ Training in warehouse technology We support you with planning, delivery, and professional assembly of your warehouse and facility equipment—reliable and efficient. Thanks to our many years of experience in warehouse technology, we serve: - Small businesses - Medium-sized companies - Industrial enterprises from various sectors With us, you receive everything from a single source—from planning through to implementation. Note: This advertisement does not constitute a binding offer. After you contact us, you will receive a customized quotation tailored to your needs.

Būklė: naudotas, bendras svoris: 5 000 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 09/1987, krovimo vietos ilgis: 5 900 mm, bendras plotis: 2 200 mm, bendras aukštis: 2 700 mm,

Būklė: naudotas, We offer used crossbeams here. TECHNICAL DATA Clear span: 3,600 mm Box profile: 125 x 50 mm – Load capacity per pair of crossbeams: 3,700 kg Box profile: 130 x 50 mm – Load capacity per pair of crossbeams: 3,800 kg Color: Daffodil yellow Condition: used PRICING €25.00 net per piece €29.75 gross per piece TIERED PRICING per piece – Stock: 2,000 units 1 – 50 units: €25.00 net 51 – 100 units: €24.00 net 101 – 250 units: €23.00 net from 251 units: €22.00 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, customized quote tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price stated refers to the unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US Lhsdpfx Ajy H D Ekeh Uog DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry and craft sectors. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. Four to win – The four success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Būklė: naudotas, We are offering used crossbeams for sale. TECHNICAL DATA Clear width: 2,700 mm Box profile: 110 x 50 mm Colour: Daffodil Yellow Load capacity per pair of beams: 2,650 kg Condition: used PRICE €19.00 net per unit €22.61 gross per unit TIERED PRICING per unit – In stock: 200 units 1 - 30 units: €19.00 net 31 - 60 units: €18.24 net 61 - 120 units: €17.48 net from 121 units: €16.72 net PROJECT PLANNING Our sales team will be happy to prepare a non-binding quote tailored to your requirements. TRANSPORT & ASSEMBLY Lhsdsy H D Dmspfx Ah Usg We are happy to assist with transport and assembly of the goods. PAYMENT TERMS Payment terms to be agreed upon in case of order. The price quoted is per unit (net price) as specified in the text (+ VAT). You will of course receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, material handling, mezzanine floors, textile storage as well as machines for trade, industry, and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. Four-fold success – The DLK building blocks: Warehouse Technology | Levelmaker® | Logistics | Solutions

Būklė: naudotas, We offer used cross beams for sale. TECHNICAL DATA Clear span: 2,700 mm Lodpoy H D Dgjfx Ah Ushg Box profile: 120 x 50 mm Colour: Daffodil yellow Load capacity per pair of beams: 2,900 kg Condition: used PRICE €20.00 net per item €23.80 gross per item TIERED PRICING per item – Stock: 350 units 1 - 20 units: €20.00 net 21 - 60 units: €19.20 net 61 - 120 units: €18.40 net From 121 units: €17.60 net PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and installation of the goods. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. The price is to be understood as a per-piece/net price or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continually offer attractive used equipment from various manufacturers/brands at competitive conditions. For any questions, please feel free to contact us. Four to win – The building blocks of success at DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Gamybos metai: 2008, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 080700467, Counter (millions): 0.84 Format (mm): min. 120 x 148 (option: 105 x 148) // max. up to 350 x 500 Paper weight: 40 - 300 g/m² Equipment / Additional information: Höhner stitching heads Consisting of: - Slitter Cutter Creaser - Inline Bookletmaker DBM 5000 - Auto Spine Master - DBM-500T Ljdshbu Tujpfx Ah Uohg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, Copying stroke max. 250 mm; Copying diameter max. 260 mm; Spindle speed min. 400 rpm; Spindle speed max. 3,200 rpm; Number of speed steps: 8; Main motor: 1.4 kW; Extensive accessories; You can call or write to us. We speak and write German and Russian. You can also send us messages in English. Lsdov Nxdnopfx Ah Ujhg

Būklė: geras (naudotas), Gamybos metai: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 - year 2005 - effective cutting width 180 cm - with movable carriage - new inverter device - in good condition. Lhjdjrtnccopfx Ah Uog

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), Bandpastaurisator Lhsdpjibyqqefx Ah Usg Hersteller: Steiner Modell: TP-1000-5000 Baujahr: 2012 1 Heizzone bis 95 °C 3 Kühlzonen Bandbreite: 900 mm Bandlänge: 5.000 mm Aufgabehöhe: 950 mm (verstellbar) Max. Produkt-/Durchlaufhöhe: 220 mm Dampferzeugung: 70 kg/h (kontinuierlich) 4 Umwälzpumpen

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 54 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 4 mm, Lenkimo kampas (maks.): 195 °, lenkimo spindulys (maks.): 250 mm, lenkimo spindulys (min.): 9 mm, slėgis (maks.): 250 juosta, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries for both right-hand and left-hand bending. The interchangeable bending tools enable rapid changeovers to different tube sizes. Fast hydraulics to minimize non-productive times is a key factor for series production. Clamping pressure for tube securing is optimally adjustable. The PLC control (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine offers two operating modes: In “Simple Bending,” the length and rotation of bends relative to each other are displayed automatically. In “Controlled Bending” mode, the data are input in advance, and a continuous target/actual comparison is made during bending. This excludes incorrect positioning within a specified tolerance window and thus minimizes user-related errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically retracted prematurely upon reaching the bending angle. The compact drive unit with removable mandrel support is advantageous for on-site assembly as well as for special designs requiring very long tube advance, and is also available as a stationary variant with an organized system for tools and mandrel bars. The cost-effective alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic tubing • Pipeline construction • Plant construction, e.g. chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions available longer) Lhedpfxjndn Age Ah Ueg • Maximum bending result 180º • Weight 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops by foot switch • Semi-automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome in our in-house demo room • Consultation and information at your premises • Consulting and processing for leasing/financed purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Būklė: naudotas, Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 380 V, bendras svoris: 300 kg, įvesties srovės tipas: trifazis, valdymo įtampa: 380 V, nominali galia: 2,3 kW (3,13 AG), įėjimo dažnis: 50 Hz, įėjimo srovė: 5 A, Parduodama nereikalinga lankstomoji pjūklas Lhjdpfxeyzqbzo Ah Ujg

Būklė: naudotas, Rinkinys skersinių ir rėmų palečių stelažui Lodpfsyg D Taex Ah Uehg 95 rėmai po 6 m (4 m + 2 m – suvirinti) Atstumas tarp rėmų: 1,10 m Rinkinys 4 skersinių, ilgis 3 m Rinkinys 714 skersinių, ilgis 2,7 m Rinkinys medinių lentų, 5 cm storio, pritaikytų spausdinimo popieriaus palečių laikymui. Išmontavimas vietoje – 4700 Eupen – Belgija

Būklė: naudotas, Nedcon padėklų stelažas, apie 3,1 m ilgio, naudotas 🧰 Produkto savybės • Gamintojas: Nedcon • Spalva: mėlyna Lhjdpoy D Nybjfx Ah Uog • Būklė: naudota, žr. nuotraukas • Rėmas: 2 vnt. iš anksto surinkti, 500 x 105 cm • Rėmo plotis: 10 cm • Sijos: 8 vnt. su 290 cm tarpu • Užraktai: 16 vnt. cinkuotų saugos kaiščių • Tvirtinimas: 8 vnt. Hilti betono inkarų • Keliamoji galia: 2 000 kg kiekvienam lygiui • Skyriaus apkrova: 12 000 kg • Lentynos įskaičiuotos! 💰 Kaina 440 € be PVM • Kiekio nuolaida: pagal užklausą • Pristatymo kaina: visoje Europoje pagal užklausą • Pristatymo terminas: galima pristatyti iš karto • Apžiūra ir atsiėmimas: bet kada pagal susitarimą Nuolat sandėlyje turime daugiau kaip 5 000 m padėklų stelažų iš įvairių gamintojų. (Techniniai duomenys, informacija ir kainos gali keistis ar būti netikslūs. Galimas tarpinis pardavimas! Žr. mūsų bendrąsias sąlygas, visos kainos nurodytos be PVM, prekę atsiimant iš sandėlio.)

Būklė: geras (naudotas), Gamybos metai: 2003, mašinos/transporto priemonės numeris: 18220203, System for Automated Robotic Welding Mains voltage: 3 x 400 V Mains voltage tolerance: + / - 15% Mains frequency: 50 / 60 Hz Main fuse protection: 35 A slow-blow Primary continuous current: 18 - 29.5 A at 100% duty cycle Primary continuous power: 13.1 kVA Power factor: 0.99 Efficiency: 0.9 Welding current range: - MIG/MAG: 3-500 A - Rod Electrode: 10-500 A - TIG: 3-500 A Welding current: - 40% duty cycle: 500 A - 60% duty cycle: 450 A - 100% duty cycle: 360 A Lhodpoqpgntsfx Ah Usg Welding voltage range: - MIG/MAG: 14.2 - 39.0 V - Rod electrode: 20.4 - 40.0 V - TIG: 10.1 - 30.0 V Max. welding voltage: 49.2 V Open circuit voltage (OCV): 70 V Dimensions (H x W x D): 626 x 287 x 477 mm Weight: 35.6 kg Scope of delivery includes: - Power source on steel pedestal (RS 422 interface) - Cooling unit (FK 4000-R) - Fronius VR 1500 4R/W/E robotic wire feeder case - Supply voltage: 55 V DC - Rated current: 4 A - Wire diameter: 0.8 - 1.6 mm (0.03 - 0.06 in.) - Wire feed speed: 0.5 - 22 m/min (19.69 - 866.14 ipm) - Torque: 4 Nm - Protection class: IP 21 - Dimensions (L x W x H): 405 x 208 x 205 mm (15.94 x 8.19 x 8.07 in.) - Weight: 7 kg (15.43 lb) - Drive: 4-roller drive - Max. shielding gas pressure: 7 bar (101 psi) - Coolant: Original Fronius coolant - Max. coolant pressure: 6 bar (87 psi) - Welding torch - Robacta Drive W/E, 6.25 m - Hose assembly 6.5 m - Various wear parts (e.g. bend pieces, gas nozzle, contact tips) - Extraction unit with hose management

Būklė: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: LC611, Used Tetra Pak UHT System 5000 LPH Technical Specifications & Performance Data This Tetra Pak UHT System Steritherm (Model VTIS C-4) is a robust, pre-owned processing unit designed to deliver consistent ultra-high-temperature treatment for beverage production and industrial packaging processes. Developed for high reliability and easy integration with downstream filling and packaging lines, it provides stable thermal performance and hygienic operation for modern beverage production environments. Manufacturer: Tetra Pak Model: VTIS C-4 Steritherm Year of manufacture: 2017 Capacity: 5,000 L/h Maximum process temperature (indicative): up to 148 °C (according to inspected pressure section) Scope of supply includes: - Alfa Laval SHL-20 homogenizer (250 bar) - Alfa Laval H7-RC plate heat exchanger (198 L) - Pump station with Alfa Laval LKH-10 and LKH-107 - ABB drive and CIP controller Design concept: Continuous UHT treatment with integrated homogenization and plate heat exchanger Construction: Hygienic stainless steel process components Advanced Automation & Control Systems The system includes computerized control for precise process management, ensuring stable time/temperature curves and consistent product quality. Automated monitoring of key parameters helps reduce product losses and optimize energy consumption. Safety interlocks and measuring instruments support safe operation during heating, holding, and cooling phases. Lsdjy Ef T Topfx Ah Ujhg - Central computer control for process sequences and alarms - Integrated CIP controller for optimized cleaning procedures - Process instrumentation for pressure, temperature, and flow control - CE marking at component level for included Alfa Laval components Integration Options in Production Lines Designed for seamless integration into used bottling lines or new production setups, this UHT system connects smoothly with upstream raw material handling and downstream filling and packaging technology. It supports industrial packaging workflows for PET and glass bottling operations by supplying thermally treated product directly to fillers. - Inline compatibility with fillers, buffer tanks, and conveyors - Ideal for beverage production facilities requiring continuous throughput of 5,000 L/h - Flexible process connections for integration into existing pipework and CIP circuits - Suitable for upgrades to used equipment or capacity expansion Machine Condition & Maintenance History This unit is offered as an operational, pre-owned UHT system. Accessory components show evidence of professional maintenance, including a recent maintenance tag on the Alfa Laval pump (dated 04/24) and inspection protocols for pressure-bearing components. - Operating status: fully functional - Inspection tags present on pressure sections

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, 10 stočių su oro tiekimu Lankstymo ir segimo sistema 3000 su priekiniu pjaustytuvu Presavimo stotis Standartinė komplektacija Lhedpfjy Dtx Uex Ah Ujg Vieta: sandėlyje / Untermeitingen

Būklė: naudotas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Pramac P 5000 elektros generatorius — pagaminimo metai 2024 Naudotas, iš profesionalios nuomos parko Kurt König Baumaschinen GmbH, Einbeck. Būklė ir pastabos: - Būklė: Naudotas iš nuomos, reguliariai prižiūrėtas - Funkcionalumas: Visiškai veikiantis - Produkto nuotraukos bus pateiktos vėliau — esant susidomėjimui, kreipkitės dėl naujausių nuotraukų - Apžiūrėti galima susitarus, adresu 37574 Einbeck Kaina 800 EUR + PVM | EXW Einbeck | Pristatymas pagal užklausą Lhodey A Hdbspfx Ah Uog

Gamybos metai: 2013, veikimo valandos: 84 545 h, būklė: paruoštas naudoti (naudotas), Bendri duomenys Staklių svoris: 17 500 kg Pagrindinis pavara Štampavimo jėga: 220 kN Ši TRUMPF TRUPUNCH 5000 S10 pagaminta 2013 metais. Įrengta Siemens Sinumerik 840D valdymo sistema, 3050x1550 mm darbinė zona ir 220 kN štampavimo presas. Gali apdoroti iki 280 kg ruošinių, kurių storis iki 8 mm. Į komplektą įeina Linear ATC 21 įrankiui ir papildomos parinktys, tokios kaip MULTITOOL ir GRAVIRAVIMAS. Reguliariai prižiūrėta ir geros būklės. Daugiau informacijos apie šias stakles suteiksime susisiekus. Ledpfx Aex D Nwwsh Ujhg Pritaikymo sritys Štampavimas

Būklė: naudotas, Gamybos metai: 2004, Technical Details: Screw diameter: 105 mm Injection weight in polystyrene: 4,727 g/PS Clamping force: 2,300 kN Platen size: 2,830 x 2,400 mm Opening stroke: 3,700 mm Mold installation height: 1,100–1,800 mm Shot volume: 5,195 cm³ Max. injection pressure: 2,296 bar Dimensions: 14.2 x 4.15 x 2.84 m Total weight: 143 t Tie bar spacing: 2,000 x 1,600 mm Robot system, core pulls, hot runner controller Lhsdpfx Ajtrbcbjh Uog -    The machine is in very good condition -    Complete additional cutting units available -    Comes with a conveyor belt and robot systems (model 2012)

Būklė: naudotas, Gamybos metai: 2018, valdiklio modelis: , Description: Technical Data Year of manufacture: 2018 Press force approx.: 3200 kN Bending length approx.: 4420 mm Control system: TASC 6000 Throat depth: 420 mm Clear distance between uprights approx.: 3680 mm Usable installation height approx.: 615 mm Machine weight approx.: 23,400 kg Equipment: - Robust machine frame - Press beam, stress-relieved annealed with high flexural strength - Spherical bearing of the press beam (inclination) - Electro-hydraulic top drive with 4-cylinder technology - Optical setup and positioning aid - Generous bending clearance Lhjdpfx Ajyy Hgqsh Uog - Flat front covers - Block hydraulics - Electronic pressure scale - Measuring system with glass scale and deflection compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Extended equipment: - 6-axis backgauge system - Hydraulic upper tool clamping - CNC crowning - Work area lighting front and rear BendMaster (150): - Sturdy base body and manipulator in cast aluminum construction - Load capacity 150 kg, sheet plus gripper - Low floor track in welded construction - Sheet detection sensor for contour recognition - Rotary feedthrough for easy gripper change - Gripper coupling on BendMaster - Sensor technology for 4-axis backgauge system - Electric drives - Double sheet detection - NC re-grip station - Vacuum generation for suction grippers - Podium (300 mm) for press brake Extended BendMaster equipment: - Track extension to 12 m - Sensor technology for 6-axis backgauge - Gripper change console - Undefined vacuum gripper - Modular vacuum gripper with separation (material for 3 grippers) - Gripper coupling - Jaw gripper - Sheet removal station with linear axis - Right-side door for safety fence

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, X-axis travel: 630 mm Y-axis travel: 600 mm Z-axis travel: 670 mm Control: MSX 501 Spindle speeds – infinitely variable: 14,000 rpm Tool holder: BT 40 Pallet changer with rotary table: 360x1 degree, 2 positions Max. workpiece weight: 500 kg Tool changer capacity: 60 stations Table size: 500 x 500 mm Total power requirement: 56 kW Machine weight approx. 11.8 t Required space approx. 5.8 x 3.6 x 3.0 m Lhjdpfxoygx D To Ah Ujg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized Lodjh R Taqopfx Ah Ushg - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany Lhjdpomhhy Nsfx Ah Usg - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.