Sun Pdl 5000 pirkti naudotą (27 539)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 203214, ruošinio svoris (maks.): 2 kg, veleno greitis (maks.): 3 700 aps./min, ruošinio skersmuo (maks.): 150 mm, tuščias svoris: 1 579 kg, TECHNICAL DETAILS Workpiece diameter: 8 to 150 mm Max. workpiece weight: 2 kg Spindle speed range: 250 to 3,700 rpm Standard speed range: 20 to 1,000 rpm Stroke speed range: 33 to 500 strokes/min Tools Krossgrinding tools: 5.46 to 32 mm TurboHone tools: 3.81 to 32 mm Connecting rod tools: 53.8 to 63.8 mm Larger tools: 25.4 to 101.6 mm MACHINE DETAILS Coolant system Pump motor power: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l Compressed air requirements: 566 l/min at 4.48 bar Recommended air pressure: 5.52 bar Temperature range: 0 to 35 °C Noise emissions: < 71 dB(A) continuous, < 75 dB(A) peak Dimensions & weight Dimensions (L x W x H): 2,946 x 2,971 x 1,829 mm Net weight: 1,579 kg Pedpsxxkfxefx Afwsrd Minimum floor slab requirement: At least 150 mm thickness EQUIPMENT Automatic setup (spindle speed, stroke speed, stroke length, feed rate, spark-out) Automatic finishing Machine modes: automatic, manual Batch production Single-part production Optional clamping

Sąlyga: naudotas, Gamybos metai: 2009, Yra du tokie patys įrenginiai: vienas pagamintas 2008 m., kitas – 2009 m. - Rankinio šlifavimo diametras: 1,5 – 165 mm Predpfx Asxx Iliofwsd - Automatinio šlifavimo diametras: 1,5 – 101 mm - Eigos ilgis: 6 – 170 mm PAGRINDINIS VELENAS - Veleno apsisukimų skaičius: 200 – 3000 aps./min. - Veleno pavara: 4,1 kW ELEKTROS TIEKIMAS - Maitinimo įtampa: 400 V - Bendra galia: 10,5 kVA SVORIS IR MATMENYS - Užimamas plotas: 1 600 x 1 220 mm - Įrenginio aukštis: 1 900 mm - Įrenginio svoris: 1 000 kg

Sąlyga: naudotas, TECHNICAL DATA - Manual lapping diameter: 1.5 - 165 mm - Automatic lapping diameter: 1.5 - 101 mm - Stroke: 6 - 170 mm MAIN SPINDLE - Spindle speed: 200 - 3000 rpm - Spindle drive power: 4.1 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 10.5 kVA Prjdowdacyjpfx Afwod WEIGHT AND DIMENSIONS - Required floor space: 1,600 x 1,220 mm - Machine height: 1,900 mm - Machine weight: 1,000 kg ACCESSORIES - Coolant tank - Workpiece loading/unloading robot

Sąlyga: geras (naudotas), Gamybos metai: 1970, šlifavimo skersmuo: 1 200 mm, šlifavimo ilgis: 5 000 mm, Cylindrical Grinding Machine NAXOS UNION - KR 1250 / 5000 Centre Height: 600 mm Grinding Diameter Ø: 1200 mm Grinding Length: 5000 mm Grinding Wheel Dimensions: 1600 x 100 mm Prsdpfxewrxqxs Afwjd Grinding Wheel Speed: 1620 rpm Length: 17,500 mm Width: 5,500 mm Height: 2,200 mm Weight: 60,000 kg

Sąlyga: geras (naudotas), Platforminis vežimėlis, transportavimo vežimėlis, sunkiasvoris vežimėlis, stalo vežimėlis, surinkimo vežimėlis, pramoninis priekaba, konteinerio vežimėlis (dolly), dviguba pasukama ašis, sunkiasvoris priekaba - Sunkiasvoris transporto vežimėlis: pramoninis priekaba su vienos ašies sukamąja važiuokle - Platforma: 5000/2000/H700 mm - Keliamoji galia: 16 t Psdpoxwidqjfx Afwsrd - Padangos: Solideal 425/150-305 pilno gumos dvigubos padangos - Bendri matmenys: 6890/2000/H700 mm - Svoris: 1560 kg

Sąlyga: naudotas, rida: 280 000 km, galia: 125 kW (169,95 AG), kuro tipas: dyzelinas, pavaros tipas: mechaninis, bendras svoris: 7 200 kg, pirmoji registracija: 04/2015, krovimo vietos ilgis: 3 800 mm, krovinių skyriaus plotis: 2 100 mm, krovos erdvės aukštis: 400 mm, spalva: sidabras, sėdimų vietų skaičius: 3, Gamybos metai: 2015, Įranga: ABS, kranas, oro kondicionavimas,

Sąlyga: naudotas, rida: 110 480 km, galia: 160 kW (217,54 AG), pirmoji registracija: 08/2009, bendras svoris: 11 990 kg, kuro tipas: dyzelinas, spalva: geltonas, ašių konfigūracija: 2 ašys, pavaros tipas: automatinis, emisijos klasė: Euro 4, bendras plotis: 2 450 mm, bendras aukštis: 3 700 mm, Įranga: kranas, oro kondicionavimas, visų varančiųjų ratų pavara,

Sąlyga: naudotas, rida: 223 294 km, galia: 160 kW (217,54 AG), pirmoji registracija: 11/2006, bendras svoris: 11 990 kg, kuro tipas: dyzelinas, spalva: geltonas, ašių konfigūracija: 2 ašys, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 3, Įranga: ABS, autonominis šildytuvas, kranas, oro kondicionavimas, visų varančiųjų ratų pavara,

Sąlyga: beveik kaip naujas (naudotas), 24000 kg Ilgis 5000 mm Plotis 2500 mm Podpfx Ajxcuyusfwjrd Pakrovimo aukštis 700 mm

Sąlyga: naudotas, Measuring and Scribing Plate, Steel Cast Grey Cast Iron, Heavily Ribbed, STIEFELMAYER Previously part of a coordinate measuring machine with manual measuring arm High-precision measuring plate with good surface finish Machine No. 8530979 Year of manufacture approx. 1989 Length 5000 mm Prjdpfeftpl Dsx Afwjd Width 2000 mm Thickness 350 mm Working height 690 mm Plate thickness 50 mm throughout - 15 height-adjustable leveling feet - Very precise and stable longitudinal guides, bolted to the sides of the plate Required space (L x W x H): 5000 x 2120 x 400 mm Weight approx. 7500 kg Good surface finish

Sąlyga: naudotas, rida: 203 819 km, pirmoji registracija: 08/1994, spalva: balta, ašių konfigūracija: 4x2, padangos dydis: 225/75R17,5, ratų bazė: 3 100 mm, pavaros tipas: mechaninis, pakaba: plienas, krovinio erdvės tūris: 5 m³, Gamybos metai: 1994,

Sąlyga: naudotas, rida: 149 986 km, galia: 160 kW (217,54 AG), pirmoji registracija: 03/2009, bendras svoris: 11 990 kg, kuro tipas: dyzelinas, spalva: geltonas, ašių konfigūracija: 2 ašys, pavaros tipas: automatinis, emisijos klasė: Euro 4, bendras plotis: 2 450 mm, bendras aukštis: 3 700 mm, Įranga: kranas, oro kondicionavimas, visų varančiųjų ratų pavara,

Sąlyga: naudotas, Honavimo staklės SUNNEN EC-35000CEM-26 Pjdpoxbtykofx Afwjrd

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, centro aukštis: 180 mm, sukimosi skersmuo virš skersinio stumduko: 212 mm, veleno skylė: 52 mm, tekėjimo ilgis: 1 000 mm, plunksnos brūkšnys: 152 mm, quill skersmuo: 52 mm, tekėjimo skersmuo: 360 mm, veleno nosis: ASA D1-6, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 20 aps./min, bendras svoris: 1 470 kg, Įranga: sūkių greitis be galo kintamas, SUN MASTER RML-1440V yra greitaeigis, preciziškas universalus tekinimo staklės, skirtos tiksliam tekinimui, sriegimui ir bendriesiems metalo apdirbimo darbams. Įrenginys pasižymi standžia iš ketaus pagaminta lova, grūdintomis ir šlifuotomis vedimo kreiptakėmis, galingu, kintamo greičio, dviejų diapazonų pavarų galvos suktuvu (20–400 / 400–2500 aps./min.), bei D1-6 tipo suktuvo nosimi. Į komplektą įeina pilnai automatinė pavarų dėžė, išilginė ir skersinė maitinimas, 4 padėčių įrankių galva, konusinis tašytas griebtuvėlis su MT4 grąžtuvės angos įvore, kojinis stabdis, pastovaus paviršiaus greičio (CSS) funkcija, aušinimo skysčio sistema ir integruota tepimo sistema. RML-1440V siūlo stabilų veikimą, precizišką valdymą bei universalumą tiek serijinei gamybai, tiek dirbtuvėse. Staklės sandėlyje ir paruoštos siuntimui bet kuriuo metu. Prodoxyh Nqopfx Afwed

Sąlyga: labai geros būklės (naudotas), Here we offer a SUN-TEC cleanroom technology heating plate. SUN-TEC Cleanroom Technology Heating Plate Pjdpfxod Nfq Sj Afword Cleanroom workstation with heating plate 1600 mm x 1200 mm x 2200 mm Rated voltage: AC 200V 3 phase 50Hz 30A Max. temperature: 200°C Type: Y9AT417 Condition: used Scope of delivery: (See photo) (Subject to changes and errors in the technical data, all details are non-binding!) We are happy to answer further questions for you by phone.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, We offer here a high-productivity 3D printer for industrial series production. The system was most recently used with Alupowder AISi10MG. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, which confirm that the machine was operational before disassembly. All axes are professionally secured. The machine can be transported on a regular standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating hours: Laser 1 beam on: 5165 hrs. Laser 2 beam on: 5096 hrs. Laser 3 beam on: 5023 hrs. Trumpf TruPrint 5000 with options Powder Bed Monitoring and Melt Pool Monitoring included Filter unit Accessories: 2 build cylinders 3 dosing cylinders 1 overflow container used 1 overflow container NEW Manuals 4 heat exchangers NEW 2 easy filters NEW 3 NTRON SIL02 oxygen analyzers + sensors NEW 1 oxygen sensor NEW and much more, such as seals, etc. The pallet truck by Armanni CAR.Elev. for swapping containers is also in stock and can be offered optionally. Faster to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 prepares you for industrial-scale series production. With features such as an optional 500°C preheating and the full-field multilaser setup featuring three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine produces high-quality parts from a range of metallic materials quickly and reliably—and meets the rigorous quality requirements in tool and mould making, also when 3D printing on preform blanks, as well as in aerospace and medical technology sectors. Optionally, the entire process chain can be executed under protective gas atmosphere: sieving, printing, cooling, depowdering. Combined with external part and powder management and TRUMPF’s monitoring solutions, it is perfectly suited for industrial additive series manufacturing. With the Preform option, the TruPrint 5000 supports hybrid component production. The additively manufactured component structures are built onto a blank. This innovative feature is particularly suitable for easy handling in tool and mould making. Prjdpfx Afovu Syyowod TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (reduced when preheating >200 °C) Processable materials[1]: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminium, nickel-based or titanium alloys Build rate[2]: cm³/h 5–180 Layer thickness[3]: μm 30–150 Max. laser power at the workpiece (TRUMPF fiber laser): W 3 x 500 Beam diameter[3]: μm 100–500 Minimum measurable oxygen content: ppm up to...

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Mobile coil cart FORSTNER AG 5000 b2mf 1500 Prjdpfxjmv Hv Aj Afwod Maximum coil width: 1500 mm Load capacity: 5000 kg Inner diameter: 360 - 630 mm Outer diameter: 1100 mm Equipped with 4-arm mandrel Double-supported decoiler with handbrake and steel wheels for mobility

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, labai geros būklės Pedpfxoxuf Ito Afwsrd

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Inox bak 500 m³ Predpfjvwmrcox Afwod Diameter: 8 m Hoogte: 11,50 m Vanwege de afmetingen worden de tanks door ons in delen gesneden en op locatie gelast. De cilinder is vervaardigd uit AISI316 staal, terwijl de boven- en onderbodem bestaan uit duplex staal. Optioneel kunnen de bodems ook in AISI316 staal worden geleverd. De prijs is inclusief de kosten voor het lassen van de tank.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, mašinos/transporto priemonės numeris: B0508A0463, TRUMPF TruBend Cell 5000 – Zrobotyzowana komórka gięcia | Rok produkcji: 2015 Prasa krawędziowa TruBend 5230 Zrobotyzowany system gięcia BendMaster Psdpfx Afew Eilyjwerd System sterowania: TASC 6000 (programowanie robota i prasy przez interfejs maszyny) Specyfikacja prasy krawędziowej: Siła nacisku: 230 ton Długość gięcia: 4250 mm Rok produkcji: 02.2015 Numer seryjny: B0508A0463 Czasy pracy: Czas załączenia maszyny: 33 789,3 h System hydrauliczny: 8 528,8 h Czas pracy belki prasującej: 1 119,9 h Opis: W pełni zautomatyzowane rozwiązanie do gięcia – TruBend Cell 5000 przeznaczona do produkcji wielkoseryjnej i precyzyjnej. Zintegrowany robot umożliwia wydajne gięcie przy minimalnym udziale operatora. Stan: Bardzo dobry, regularnie serwisowany Demontaż, załadunek i transport mogą zostać zorganizowane.

Sąlyga: beveik kaip naujas (parodų įrenginys), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of supply: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit switches off if the water cooling fails or overheats to protect the torch package. These features would typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our view the most functional wire feed case, as the wire spool is safely stored in the closed case. ➤ Fronius Long Intermediate Hose Package – Each set is supplied with a 5-meter connecting hose between the power source and wire feed case, providing more flexibility and better handling. Take the wire feed unit from the main machine to hard-to-reach areas! The connecting hose is neatly mounted on a hook at the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with gas bottle holder available on the market. ➤ Binzel Torch Package – With up/down regulation of amperage directly at the torch. ➤ Ground Cable 3-4m ➤ New pressure regulator from Messer ➤ New basket spool adapter for large wire spools This machine enables welding of almost all materials, including aluminium, steel, and stainless steel (V2A). It features pulse wire programmes and is also suitable for MIG brazing (CuSi), which is frequently used in the bodywork sector. Further options available at extra cost For example: Fronius AW4000/AW5000 Job Master torch package (display on the torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE FULL INVOICE PROVIDED Pedpfswbil Ssx Afword Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping without issue! ✔ We are also available on WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What condition are the machines in? To clarify: We purchase nearly new used machines, disassemble and meticulously inspect them, replace any worn parts if necessary, and only after a successful test weld do we release them for sale. "All" machines are clean, with no burn holes in the displays and no significant burn marks or dents scattered across the units! You are buying an item that is also ⭐visually appealing and does not look run-down! ►►►Will we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you possess a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash upon personal pickup. ►►►Why buy from us? We are specialists in this Fronius welder series, always stocking 60-80 units – exclusively Fronius, no other manufacturers! We know these machines in detail and do not sell anything we are not thoroughly familiar with.

Sąlyga: naudotas, Frequency inverter, frequency converter, drive inverter, controller, variable speed drive -Type: Microdrive-3 UDZ-70 -Power: 33-44 kW -Connection: 380-480 V -20/+5% 48-62 Hz -Current: 70 A Pedpsdkqg Sjfx Afwjrd -Dimensions: 440/145/H685 mm -Weight: 35 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Predpfewbh Ifox Afwed Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.

Sąlyga: beveik kaip naujas (parodų įrenginys), FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package, standard from 1.5 m ➤ Fronius carriage ➤ Fronius hose package Prodpfx Afewbknbswed ➤ Ground cable 3-4 m ➤ Pressure regulator With this unit, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It features filler wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in bodywork applications. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further expanding the functions of the TPS unit. ----- IMMEDIATE DELIVERY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For clarification: we purchase nearly new used units, disassemble them, check everything thoroughly, replace any wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean and have neither burn marks on the displays nor numerous burn holes or dents distributed over the unit! You buy from us an item that is presentable and does not look completely worn out! ►►►Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash upon personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the units on site and pay in cash. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – Fronius only, no other brands! We are experts with these units and never sell anything we are not familiar with.

Sąlyga: geras (naudotas), Interface from Fronius Pedpfowbkf Tox Afword