Stulpelio Gręžimo Staklės pirkti naudotą (47 797)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, OPTIdrill D 26PRO – Column Drilling Machine Bench and column drilling machine with V-belt drive User-friendly safety switch according to IP 54 with undervoltage release and separate emergency stop actuator 400 Volt models with forward/reverse operation Drilling depth stop Precisely machined drill table with diagonally arranged T-slots Height adjustment of the drill table via rack and pinion Drill table inclinable ± 45° and rotatable 360° V-belt guard with safety switch One-piece aluminum die-cast quill lever with soft-grip handles Industrial motor Precision spindle bearing Machine operation including safety electronics in 24V DC Guaranteed concentricity accuracy Djdpfx Acjdqzbno Ieuu

Būklė: naujas, Continuous drilling capacity: 25 mm Standard drilling capacity: 30 mm Thread cutting capacity: M 12 Spindle: MK 3 Drilling depth: 135 mm Infinitely variable spindle speed: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Power connection: 400 V, 50 Hz Features: - Thread cutting device - Digital speed display as standard - Coolant system - LED machine lamp - Stepless speed adjustment - 24 V electrics - Base plate with T-slots - Drill table adjustable via rack-and-pinion and worm gear, swivelable around the column - Emergency stop button Dodpfx Ajd R Acboc Isuu - Full motor protection - Star grip - CE compliant

Būklė: naujas, Maximum drilling capacity: 30 mm Thread cutting: M 16 Tool holder: MT 3 Spindle speeds, stepless: 150 - 2500 rpm Throat depth: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Motor power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Features: - Variable drive for stepless adjustment of the desired speed Dujdpfod R Nv Isx Ac Iou - Quill travel selectable either by hand or via mechanical feed - Set spindle speed quickly and easily readable via digital display - Sturdy cast iron table with T-slots and coolant channel - Adjustable drilling depth stop, depth can be read via scale - Thread cutting device - CE / IEC certified, German documentation and German-based service Scope of delivery: - Keyless drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MT 3 / B 18 - Coolant system - Digital speed readout - Reducing sleeves MT 3/2, MT 3/1 - LED machine light - Height-adjustable protective cover

Būklė: naujas, Maximum drilling capacity: 35 mm Thread cutting: M 24 Tool holding fixture: MK 4 Spindle speeds, stepless: 65 - 2000 rpm Throat depth: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size / T-slot size: 685 x 485 mm / 14 mm Motor power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Features: - Variable drive for stepless adjustment of the desired spindle speed - Quill feed selectable either manually or by mechanical feed - Set spindle speed can be quickly and easily read via digital display - Sturdy cast table with T-slots and coolant channel - Adjustable drilling depth stop, drilling depth readable via scale - Thread cutting device Dujdped Sd Tvjfx Ac Ieu - Gear pre-stage - CE / IEC compliant, German documentation and German service Scope of delivery: - Table clamping and height adjustment from the front - Quick-action drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 3 / B 18 - Coolant system - Digital speed display - Reduction sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Būklė: naujas, Column Drilling Machine Brand: MAXION Model: UNIMAX 3 TAP Duedpfx Ajd Hrhvjc Iju Condition: New machine Spindle speed (stepless): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Maximum drilling capacity: 30 mm Standard features include: - Stepless speed control - Digital speed display - Digital drilling depth display - Thread cutting device - LED machine light - Automatic tool ejector - Operating manual

Būklė: geras (naudotas), Gamybos metai: 1987, 1 x Pillar Drilling Machine Flott SB M3 Duodsf Sagwjpfx Ac Ieu Year of manufacture: 1987 with pneumatically adjustable feed and depth stop. + Coolant system Technical data: Max. drilling diameter: 30 mm Spindle taper: MT 3 Spindle speed: 160 - 1,600 rpm Table size: 400 x 325 mm Accessories: 1 x Drill chuck 2 - 16 mm 1 x Drill chuck key 1 x Vice 1 x Drift key The machine can be inspected under power at any time.

Būklė: naujas, Bernardo Gear-driven Pillar Drill GB 50 HS Drilling capacity in steel: 50 mm Drilling capacity in cast iron: 60 mm Maximum tapping capacity: M42 Drill chuck: 1 - 13 mm / B16 Morse taper: MT 4 Spindle speed / Number of steps: 40 - 2100 rpm / 12 Feed range: 0.1 / 0.2 / 0.3 / 0.4 mm/rev Throat depth: 370 mm Max. distance spindle / table: 600 mm Distance spindle / base plate: 1190 mm Quill stroke: 250 mm Column diameter: 200 mm Table size / T-slot size: 600 x 500 mm / 14 mm Motor power: 2.2 / 2.8 kW Machine dimensions (W x D x H): 700 x 1050 x 2350 mm Weight approx.: 670 kg Scope of delivery: • Key-type drill chuck 1 - 13 mm / B16 • Drill chuck arbor MT 4 / B16 • Reducing sleeves MT 4 / 3, MT 4 / 2 • Motorized table lift • Coolant system • Electromagnetic spindle feed • Tapping device • Automatic tool ejector • LED machine lamp • Initial fill with Shell Tellus 46 Duedpod Tm T Hsfx Ac Iju • Digital speed display • Digital drilling depth display • Height-adjustable safety guard

Būklė: naujas, COLUMN DRILLING MACHINE IBERDRILL BZ 40 TECHNICAL DATA - STANDARD Max. drilling capacity for steel (St 60) at continuous operation S1: Ø 40 mm Max. drilling capacity for cast iron (GG 20) at continuous operation S1: Ø 45 mm Max. thread cutting capacity for steel (St 60) at continuous operation S1: M 33 Max. thread cutting capacity for cast iron (GG 20) at continuous operation S1: M 39 Tool holder in spindle: Morse Taper 4 (MK 4) Max. spindle stroke (drilling depth): 180 mm Spindle motor power: 4.12 kW Drive type: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 – 2,000 rpm Feed: automatic or manual Number of automatic feeds: 3 steps Automatic feed range: 0.1 – 0.2 – 0.3 mm/rev Table dimensions (width x depth): 480 mm x 480 mm Column diameter: 150 mm Dsdpfsgy Haaex Ac Isuu Distance spindle center / column: 350 mm Machine weight (net): 470 kg Gross weight: 520 kg Transport dimensions (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency converter Infinitely variable speed control via potentiometer digital speed display 3 automatic feeds electromagnetic clutch ergonomic four-way handwheel with integrated feed buttons depth scale with adjustable drilling depth automatic feed reversal for tapping automatic tool ejector movable, swivel and tiltable worktable (Type MGI) machine base plate with machined support surface, T-slots, and integrated coolant system integrated lighting EMERGENCY STOP button chip guard with microswitch monitoring thermomagnetic motor protection, control electrics in low-voltage range Paint finish: RAL 7004 (signal grey), RAL 9011 (graphite black) Documentation, operation and maintenance manual, CE

Būklė: naujas, COLUMN DRILLING MACHINE IBERDRILL BC-50 VE TECHNICAL DATA – STANDARD Max. drilling capacity for steel (St 60) at continuous operation S1: Ø 50 mm Max. drilling capacity for cast iron (GG 20) at continuous operation S1: Ø 60 mm Max. thread cutting capacity for steel (St 60) at continuous operation S1: M42 Max. thread cutting capacity for cast iron (GG 20) at continuous operation S1: M50 Spindle taper: MK 4 Max. spindle stroke (drilling depth): 200 mm Spindle motor power: 4 kW Drive: 3-speed gearbox and V-belt Speed adjustment: stepless via potentiometer Speed range for 50 Hz motor, n = 1,500 rpm: 30 – 300; 90 – 900; 190 – 1,900 rpm Feed: automatic or manual Number of automatic feeds: 4 steps Automatic feed range: 0.1 – 0.2 – 0.3 – 0.4 mm/rev Table dimensions (width x depth): 550 mm x 550 mm Column diameter: 175 mm Distance spindle center/column: 360 mm Net/Gross machine weight: 760 kg / 850 kg Dujdpfsgy Halex Ac Iju Transport dimensions (L x W x H): 2.4 m x 0.7 m x 1.3 m STANDARD EQUIPMENT / BASIC MACHINE Gearbox with precision gears and automatic oil pump lubrication and V-belt 3 gearbox speeds selectable via a single front lever 3 speed ranges with stepless speed adjustment by frequency inverter digital speed display integrated into front panel 4 automatic feeds electromagnetic clutch ergonomic 4-way cross handle with integrated feed buttons Handwheel for fine manual feed Scale with adjustable drilling depth, automatic tool ejector Moveable, rotatable, and tiltable worktable (Type MGI) Machine base with machined support surface, T-slots and integrated coolant system automatic feed reversal during thread cutting integrated lighting, EMERGENCY STOP button Chip guard with microswitch monitoring thermomagnetic motor protection, control electrics in low-voltage range Finish RAL 7004 (signal grey), RAL 9011 (graphite black) Documentation, operation and maintenance manual

Būklė: naujas, Bernardo Gear Column Drilling Machine GHD 28 SV with Digital Depth Display Technical Specifications - Maximum drilling capacity: 28 mm - Maximum thread cutting: M12 - Quick-change drill chuck: 1 – 16 mm / B 16 - Morse taper: MK 3 - Spindle speeds (8 steps): 75 – 3010 rpm - Feed rates: 0.004 / 0.006 / 0.009 / 0.012 / 0.10 / 0.15 / 0.30 mm/rev - Throat: 320 mm - Max. distance spindle / table: 810 mm - Distance spindle / base plate: 1230 mm Duedpod Err Ujfx Ac Ieu - Quill stroke: 150 mm - Column diameter: 105 mm - Base plate working surface: 325 x 360 mm - Table size / T-slot size: 500 x 350 mm / 14 mm - Motor output (S1 100%): 0.90 / 1.2 kW (400 V) - Motor input (S6 40%): 1.35 / 1.7 kW (400 V) - Machine dimensions (W x D x H): 600 x 700 x 1900 mm - Weight approx.: 290 kg Features • Digital quill travel display for convenient operation • Supplied as standard with automatic quill feed (0.04 – 0.3 mm/rev) • Helical gear transmission for optimal power transfer • High efficiency and quiet running thanks to helical gears made of steel against reinforced fiber material • Automatic quill feed disengages at preset drilling depth • Forward/reverse switch for tapping operations • Stable, ground steel column designed for heavy-duty use • 8 switchable speeds via powerful two-stage drive motor Scope of Delivery • Quick-change drill chuck 1 – 16 mm / B 16 • Drill chuck arbor MK 3 / B 16 • Reducing sleeves MK 3 / 2, MK 3 / 1 • Digital drilling depth display • Automatic tool ejector • Forward/reverse tapping function • Height-adjustable protective cover

Būklė: naujas, COLUMN DRILLING MACHINE IBERDRILL AZ 40 TECHNICAL DATA – STANDARD - Max. drilling capacity in steel (St 60) at continuous operation S1: Ø 40 mm - Max. drilling capacity in cast iron (GG 20) at continuous operation S1: Ø 45 mm - Max. thread cutting in steel (St 60) at continuous operation S1: M 33 - Max. thread cutting in cast iron (GG 20) at continuous operation S1: M 39 - Tool holder in spindle: MT 4 - Max. spindle travel (drilling depth): 180 mm - Spindle motor power: 4.12 kW - Drive: V-belt - Speed adjustment: stepless - Speed range for 50 Hz motor, n = 1,500 rpm: 100 – 2,000 rpm - Feed: automatic or manual Dedegy E U Dspfx Ac Ieuu - Number of automatic feeds: 3 speeds - Range of automatic feeds: 0.1 – 0.2 – 0.3 mm/rev - Table dimensions (width x depth): 480 mm x 480 mm - Column diameter: 150 mm - Distance spindle center / column: 350 mm - Machine weight (net): 460 kg - Gross weight: 510 kg - Transport dimensions (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASE MACHINE - V-belt drive with frequency inverter - Stepless speed adjustment via potentiometer - Digital speed display - 3 automatic feeds - Mechanical clutch - Depth scale with adjustable drilling depth - Automatic feed reversal for thread cutting - Automatic tool ejector - Worktable can be moved, rotated, and tilted (Type MGI) - Machine base plate with milled support surface, T-slots, and integrated coolant system - Integrated lighting - Emergency stop button - Swarf protection with microswitch monitoring - Thermomagnetic motor protection, control electrics in low voltage area - Colour: RAL 7004 (signal grey), RAL 9011 (graphite black) - Documentation, operating and maintenance manual, CE

Būklė: naujas, COLUMN DRILLING MACHINE IBERDRILL AZ 34 TECHNICAL DATA – STANDARD Maximum drilling capacity for steel (St 60) at continuous duty S1: Ø 34 mm Maximum drilling capacity for cast iron (GG 20) at continuous duty S1: Ø 40 mm Maximum thread cutting capacity for steel (St 60) at continuous duty S1: M 27 Maximum thread cutting capacity for cast iron (GG 20) at continuous duty S1: M 33 Spindle taper: MK 4 Maximum spindle stroke (drilling depth): 150 mm Spindle motor power: 3 kW Drive: V-belt Speed adjustment: stepless Speed range for 50 Hz motor, n = 1,500 rpm: 100 – 2,000 rpm Feed: automatic or manual Number of automatic feeds: 3 steps Automatic feed range: 0.1 – 0.2 – 0.3 mm/rev Table size (width x depth): 420 mm x 400 mm Duodpfx Ajgy E S Eec Ieu Column diameter: 125 mm Distance spindle center / column: 300 mm Machine weight (net): 360 kg Gross weight: 410 kg Transport dimensions (length x width x height): 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASE MACHINE V-belt drive with frequency inverter Stepless speed adjustment via potentiometer Digital speed display 3 automatic feeds Mechanical clutch Scale with adjustable drilling depth Automatic feed reversal for thread cutting Automatic tool ejector Movable fixed worktable (type MF) Machine base plate with machined support surface, T-slots and integrated coolant system Integrated lighting EMERGENCY STOP button Chip guard with microswitch monitoring Thermomagnetic motor protection, low voltage electrical controls Colour: RAL 7004 (signal grey), RAL 9011 (graphite black) Low voltage electrical controls Documentation, operating and maintenance manual

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Drilling machine for corner posts. With this machine, you can precisely drill corner posts that are stacked on top of each other. Dedpfx Aeg U U D Rsc Isuu Regardless of the post dimensions, the machine drills two dowel holes, allowing the posts to be aligned and mounted precisely on top of each other. The machine has been overhauled and is ready for operation.

Būklė: beveik kaip naujas (parodų įrenginys), Column Drilling Machine Manufacturer: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed range: 100 – 1,800 rpm Standard equipment includes: - 7” TFT LCD display with touch function: Manual input of target spindle speed, Actual speed display, Integrated drilling depth display with touch zeroing function, Virtual drilling depth scale shown in the display, Machine status indicators and warning messages in the display, Service information, Selectable operating language: DE/EN/FR/ES/IT/NL/RU. - Tapping device - Infinitely variable speed adjustment via lever - Digital speed display - Three separate buttons for clockwise - counterclockwise - stop - Clockwise/counterclockwise control via contactor - Spindle guard - Operating manual Dedpfsiypz Esx Ac Ieuu Further key technical data: - 30 mm drilling capacity in ST 60 - 140 mm quill stroke - Spindle taper MT 3 - 115 mm column diameter - 1.0 / 1.6 kW motor power - 515 x 360 mm table dimensions With the following options: - LED machine lamp - Automatic spindle stop - Technology calculator on display - Workpiece counter

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įrankio skersmuo: 50 mm, veleno tvirtinimas: MK 4, pavaros tipas: elektrinis, sukimosi greitis (maks.): 2 200 aps./min, sukimosi greitis (min.): 55 aps./min, stalo plotis: 800 mm, stalo ilgis: 260 mm, bendras svoris: 800 kg, Įranga: CE žymėjimas, sūkių greitis be galo kintamas, The GB 55 SK NC VARIO drill, equipped as standard with a large cross table and a 2-axis digital readout, enables not only drilling but also precise milling operations. Automatic spindle feed and a tapping function significantly enhance the machine’s capabilities. Stepless spindle speed regulation in the range of 55–2200 rpm, combined with robust construction and large drilling parameters, make this model highly suitable for serial or industrial production. The NC version is equipped with a programmable controller for setting parameters such as drilling depth, spindle speed, and offers automatic tapping functions. Drilling capacity: 50 mm, tapping up to M42. NC version features a programmable controller for, among others, setting drilling depth, spindle speed, and automatic tapping function. 6-range automatic spindle feed, adjustable via electromagnetic clutch, including threading function. Solid machine construction ensures vibration-free operation. High-performance motor designed for continuous operation. 2-axis digital display guarantees precision machining. Solid base plate with T-slots and integrated coolant system. Comprehensive standard equipment. Quiet operation thanks to hardened and ground gear wheels. Machine guards conform to the latest CE standards. Automatic tool ejector. Quick tool change enabled by automatic tool ejector. Electronic drilling depth and spindle speed indicators as standard. Stepless spindle speed regulation. Technical specifications: Maximum drilling capacity: 50 mm Drilling in castings: 60 mm Maximum tapping capacity: M42 Drill chuck: 1–13 mm / B16 Spindle taper: MK 4 Duedpfx Aoytfuxjc Ieu Spindle speed min.: 55 rpm Spindle speed max.: 2200 rpm Speed change – number of gears / stepless: stepless (55–348 / 348–2200) Drive transmission: gearbox Automatic spindle feed – ranges: 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev Drill table tilting: -45° to +45° Max. distance spindle to column: 380 mm Max. distance spindle to table: 480 mm Max. distance spindle to base plate: 1165 mm Quill stroke: 210 mm Column diameter: 150 mm Table size – width: 800 mm Table size – depth: 280 mm Cross table travel (X x Y): 415 x 290 mm T-slot (quantity, size, spacing): 14 mm Motor power (S1 100%): 3.0 kW Voltage: 400 V Dimensions – width: 1230 mm Dimensions – depth: 1240 mm Dimensions – height: 2310 mm Weight approx.: 800 kg Scope of delivery: 2-axis digital display ES-12H LCD Cross table Drill chuck 1–13 mm / B16 Arbor MK 4 / B16 Reducing sleeves MK 4/3, MK 4/2, MK 3/1 Cooling system Tapping mode Electromagnetic spindle Automatic tool ejector LED lighting Removable guard Electronic drilling depth and spindle speed display Infinitely variable spindle speed adjustment

Būklė: naujas, Gamybos metai: 2024, ALZMETALL Column Drilling Machine AB 34 iTRONIC Drilling capacity in steel: 34mm, spindle speeds: 100–1800 rpm, Short spindle MK4, spindle stroke: 160mm, throat depth: 300mm, column diameter: 145mm, usable machine table surface: 615x430mm, with T-slots 2 x 14mm x 224mm, spindle-to-table distance min./max. 138/688mm, machine table height adjustment via handwheel, feed rates 0.1–0.2–0.3–0.4 mm/rev, overall machine height without attachments: 1865mm, net weight: 470 kg. Standard equipment: - 7-inch TFT LCD display with touch function - Tapping device - Infinitely variable speed control - Spindle guard - Three separate pushbuttons for clockwise, counterclockwise, and stop functions - Mushroom-type emergency stop button - Main switch - Clockwise and counterclockwise rotation - Control voltage 24V - Protection class IP 54 - Motor insulation class "F" (155°C) - Electromagnetic feed overload protection - Initial machine oil fill Duodpfx Aoiqyixec Iju Paint finish: DD textured coating, signal white RAL 9003, PANTONE 7545c, black Including the following options: - LED machine lamp (Position 12) - Coolant system A (Position 24) - Foot switch for tapping (Position 20.5) Delivery time: ex stock Waiblingen Beinstein The machine can be viewed on site by appointment.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, 4 pakopų pavarų dėžė apsukos nuo 180 iki 2000 aps./min Djdjyxcu Ijpfx Ac Isuu variklio galia 0,75 kW giluminio gręžimo ribotuvas aukštyn/žemyn reguliavimas spaustuvas mokamas atskirai

Būklė: naujas, Drilling capacity cast iron / steel ----- 35 / 30 mm Tapping capacity cast iron / steel ----- 22 / 20 mm Motor ----- 1.5 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle taper ----- MK4 Drill table ----- 540 x 470 mm Base ----- 650 x 450 mm T-slot diameter ----- 12 mm Maximum distance spindle - table ----- 610 mm Maximum distance spindle - base ----- 1180 mm Weight ----- 320 kg INCLUDES * LED work lamp * Coolant system * Digital depth stop * Tapping function * 2-speed motor 75-3200 rpm * CE plug Dodpfxjq E N U Hj Ac Ijuu * Toolbox with various tools

Būklė: naudotas, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of Manufacture: 1977 Drilling Capacity: 32 mm Spindle Mount: MT 3 – Short quill Distance Spindle Nose – Table: 545 mm (short quill) Distance Spindle Adapter – Table: 395 mm (MT Adapter) Throat: 290 mm Quill Stroke: 160 mm Table Size: Ø 545 mm Column Diameter: 220 mm Spindle Speed: 55 – 1,450 rpm, infinitely variable Dodpfjharwvex Ac Ieuu Motor Power: 1 / 1.6 kW Electrical Connection: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and steplessly via variator gearbox - Intermediate stage for high torque at low speeds - MT Adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swivelling drilling table - Table height adjustment via hand crank - Heavy-duty machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Required space (L x W x H): 1,150 x 650 x 2,000 mm Weight: 850 kg Good condition

Būklė: geras (naudotas), Sandėlio numeris: 3075 Gamintojas: Alzmetall Mašinos numeris: 11495 Tipas / Modelis: AB3 ES Veleno eigos ilgis: 180 mm Veleno tvirtinimas: MK3 Dusdpfeyifmwox Ac Iju Gręžimo pajėgumas: 30 mm Sukimosi greičio diapazonas: 160 iki 1.420 aps./min, bepakopis Išskirtis: 280 mm Stalo skersmuo: 450 mm Tvirtinimo paviršiaus skersmuo: 360 mm Stalo aukščio reguliavimas: mm Stulpo skersmuo: 110 mm Užimamas plotas: 450 x 650 mm Bendra galia: 2 kW Priedai/įranga: Būklė: gera Svoris: 0,3 t Mašinos matmenys: 600 x 900 x 1.850 mm

Būklė: naujas, Continuous drilling capacity in St 60: 35 mm Standard drilling capacity: 40 mm Thread cutting capacity: M 30 Spindle: MT 4 Feed rate steplessly adjustable: 20 - 400 mm/min Drilling depth programmable: 175 mm Throat depth: 300 mm Distance spindle/table: 70 to 830 mm Table size: 550 x 400 mm Column diameter: 120 mm Total height: 1,980 mm Weight: 450 kg Motor, pole-changeable: 1.5 / 3.0 kW Spindle speed stepless range A: 120 - 2,500 rpm Spindle speed stepless range B: 60 - 1,200 rpm Djdpfjb Nbvgox Ac Ieuu

Būklė: geras (naudotas), Sandėlio numeris: 3017 Dedpfx Acjxdkndj Ieuu Stulpinė gręžimo staklės Gamintojas: Gillardon Staklių numeris: 0150352 Tipas: GB20 Veržlės tvirtinimas: MK 2 Stalas: 430 x 380 mm Tvirtinimo paviršius: 355 x 305 mm Stalo reguliavimas: 600 mm Atstumimas: 280 mm Eiga: 120 mm Sūkių diapazonas: 60 iki 1 400 aps./min, be pakopų reguliuojamas Pastatymo plotas: 360 x 570 mm Stulpo skersmuo: 100 mm Energijos tiekimas: 0,5 ir 1,0 kW Svoris: t Išmatavimai: 430 x 800 x 1 800 mm

Būklė: naujas, Drilling capacity ----- 50 mm Tapping capacity ----- M33 Motor ----- 3 kW Speed range ----- 55 ~ 1450 rpm Spindle travel ----- 210 mm Spindle taper ----- MT4 Automatic spindle feed ----- 0.1 / 0.2 / 0.3 / 0.4 mm/rev Drill table ----- 580 x 580 mm Base ----- 860 x 580 mm Throat depth ----- 375 mm Column diameter ----- 180 mm Max. distance spindle - table ----- 800 mm Max. distance spindle - base ----- 1325 mm Weight ----- 860 KG Duodpfxoga T H Ij Ac Isu INCLUDES * Motorized table adjustment * LED work lamp * Cooling system * Digital depth stop * Tapping function * 2-speed motor * CE plug * Case with various tools

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 14219, X ašies eiga: 1 250 mm, Y ašies eiga: 900 mm, Z ašies eigos atstumas: 560 mm, ašies skersmuo: 75 mm, veleno greitis (maks.): 1 800 aps./min, Nėra minimalaus kainos – garantuotas pardavimas aukščiausiam pasiūlymui! Dsdpfxozaqxce Ac Iouu Su skaitmeniniu eigos indikatoriumi! TECHNINIAI DUOMENYS X ašis: 1.250 mm Y ašis: 900 mm Z ašis (arba W ašis): 560 mm Veleno skersmuo: 75 mm Veleno apsukos: 18-1.800 aps./min Veleno tvirtinimas: SK-40 Stalo dydis: 950 mm x 950 mm ĮRENGINIO DUOMENYS Svoris: 10.000 kg ĮRANGA Nuotraukose matomi priedai, įskaitant įrankius, įrankių spinteles ir spaustuvus.

Būklė: reikia remonto (naudotas), Gamybos metai: 1987, Funkcionalumas: neveikiantis, mašinos/transporto priemonės numeris: 12156, X ašies eiga: 1 985 mm, Y ašies eiga: 1 270 mm, Z ašies eigos atstumas: 1 490 mm, veleno greitis (maks.): 1 250 aps./min, ruošinio svoris (maks.): 6 300 kg, TECHNINĖS DETALĖS Veleno skersmuo: 110 mm Gręžimo veleno apsukų diapazonas: 6,3 - 1 250 aps./min (4 pakopos) Skersinio stalo apsukų diapazonas: 6,3 - 315 aps./min (2 pakopos) X ašies eiga: 1 985 mm Y ašies eiga: 1 270 mm Z ašies eiga: 1 260 mm (su centravimo atrama – 1 490 mm) W ašies eiga (ilginis veleno judėjimas): 710 mm U ašies eiga (radialinė planavimo slankiojimo eiga): 250 mm Stalo matmenys: 1 600 x 1 400 mm Stalo apkrova: 6,3 t Stalo pasukimo kampas: 360° Įrankio tvirtinimas: ISO 50 Stalo ir veleno galvos vertikalios padavimo pakopos: 5 - 2 500 mm/min Didžiausias gręžimo skersmuo: 630 mm Didžiausias planavimo skersmuo: 1 250 mm Duodjzb Dqbspfx Ac Iou MAŠINOS DETALĖS Valdymo tipas: NC Programos valdymas: Heidenhain 320 Bendras energijos poreikis: apie 90 kW Mašinos svoris: apie 30 t APRIKLAUSOMYBĖ Centravimo atrama 700 planavimo slankiklis Elektroninis rankinis ratukas Pastaba: Šiuo metu mašinoje yra elektros gedimas ir reikalingas remontas!