Stulpelio gręžimo staklės

MAXION UNIMAX 3 TAP

Sąlyga: naujas, Drilling capacity in steel: 30 mm Tapping capacity: M20 Throat depth: 260 mm Drilling stroke: 125 mm Spindle taper: MT 3 Spindle feed range: 0 mm/rev Spindle speeds: 80–1440 / 180–3200 rpm Gear stages: 2-stage gearbox Column diameter: 110 mm Table size: 500 x 365 mm Total power requirement: 0.8 / 1.4 kW Machine weight: approx. 0.27 t Space requirement: approx. 0.4 x 1.2 x 1.9 m Autumn/Winter 2023 Special Offer!! Robust, precise column drilling machine with a wide range of applications. Drill table adjustable in height via rack and pinion with worm gear and swivels around the column. Gbjdpfx Ajfg U Tnobdjg Reversing switch for clockwise and counterclockwise rotation, emergency stop switch, full motor protection. Star handle. Speed digital readout as standard. Includes programmable tapping device.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 51568, Pressure: 100 t Stroke: 0–500 mm Table area: 800 x 650 mm Ram area: 800 x 600 mm Gbedpfjcxxrrsx Abdjg Pass-through opening in table: 355 mm Table height above floor: 800 mm Installation height: 1130 mm Machine weight approx.: 5.7 t Throat depth: 310 mm Space requirements (LxWxH): approx. 1.2 x 2.0 x 3.67 m Installation height specified at top stroke. Machine will be retrofitted to meet the latest safety regulations: Safety distance: 270 mm / Overrun speed measurement: 135 m/s, Overrun distance: 44 mm.

Gamybos metai: 2024, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, The universally applicable laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and article numbers after initial setup. Additionally, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a hand scanner is also possible. The standard equipment includes a laptop with holder, Windows operating system, and laser software. Optionally, the LAS 28 XL laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, a movable Z-axis, drawer systems, etc., are available. Made in Germany Fiber Laser: 30W, 20W or 50 Watt • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger optional) • Marking software EZCAD in German / English • Signal light for operating status display • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction unit (incl. activated carbon filter) • Optional: extension arms for large components (single-sided, double-sided) Gbsdpfxoqfcvio Abdsg • Optional: autofocus system • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Laptop incl. holder with Windows operating system • Frame made from aluminum profiles • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 100 kg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Dear Sir or Madam, For sale is a partially refurbished Deckel FP1 milling machine with 3-axis Heidenhain TNC113 active control, notable for its user-friendly operation. This newer model, manufactured in 1989, features central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary/swivel tilting table Travel paths: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service commitment to you: - We are a certified master workshop specializing in mechanical engineering. - All machines undergo thorough inspection. - All lubricants and, if necessary, worn parts are replaced beforehand. - On request, we can provide a complete or partial overhaul of the selected machine. - You can order additional accessories such as tools, etc., directly with your purchase. - On request, additional features such as safety equipment can be supplied and installed. Gjdspy Eldopfx Abdsbg - We are happy to arrange shipping and/or machine installation for you.

Sąlyga: beveik kaip naujas (parodų įrenginys), Column Drilling Machine Manufacturer: ALZMETALL Model: AX 3s iTRONIC Condition: New machine Speed range: 100 – 1,800 rpm Standard equipment includes: - 7” TFT LCD display with touch function: Manual input of target spindle speed, Actual speed display, Integrated drilling depth display with touch zeroing function, Virtual drilling depth scale shown in the display, Gsdpfsiypz Ejx Abdebg Machine status indicators and warning messages in the display, Service information, Selectable operating language: DE/EN/FR/ES/IT/NL/RU. - Tapping device - Infinitely variable speed adjustment via lever - Digital speed display - Three separate buttons for clockwise - counterclockwise - stop - Clockwise/counterclockwise control via contactor - Spindle guard - Operating manual Further key technical data: - 30 mm drilling capacity in ST 60 - 140 mm quill stroke - Spindle taper MT 3 - 115 mm column diameter - 1.0 / 1.6 kW motor power - 515 x 360 mm table dimensions With the following options: - LED machine lamp - Automatic spindle stop - Technology calculator on display - Workpiece counter

Sąlyga: naujas, High-performance thread cutting machine with leadscrew and optimal safety device to prevent tool breakage. Program mode for single or continuous cycle operation. Electronically controlled motor braking in single cycle mode. Easy leadscrew change via quick coupling. Technical Data UNIMAX 3T GL: Thread cutting capacity: M 4 - M20 Gbsdpfx Absgv I Unedsg Threads per hour: 800 Standard drilling capacity: 28 mm Spindle: MT 3 Thread depth: 90 mm Drilling depth: 120 mm Throat depth: 260 mm Spindle/table distance: 220 - 600 mm Table surface: 420 x 390 mm T-slot width: 14 mm Column diameter: 110 mm Overall height: 1,300 mm Weight: 250 kg Special motor: 0.9 kW Power supply: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packaging: C - 160x75x125 cm Additional accessories/options: Leadscrew, tap holder, reverse gear disengagement, externally ventilated motor, die holder, flange quill, foot impulse switch, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Sąlyga: naujas, Continuous drilling capacity in St 60: 15 mm Nominal drilling capacity: 18 mm Thread cutting capacity: M8 Spindle: MT 2 Drilling depth: 80 mm Throat depth: 180 mm Gbodpfob Eldnsx Abdog Infinitely variable spindle speeds: 200 – 4,000 rpm Spindle speeds for thread cutting: 200 – 700 rpm Distance spindle/table: up to 380 mm Table surface: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Frequency-controlled three-phase motor: 1.1 kW Equipped with a full-featured thread cutting device and programmable digital display Machine in stock and immediately available

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, The 1290 is a professional laser cutter designed for serious production operations. It features two laser heads, transforming this CNC laser machine into a highly efficient powerhouse capable of 24/7 operation. Additionally, this laser engraver and cutter comes equipped with an illuminated work table and a high-strength chain capable of handling workpieces weighing up to 80 kg. The Wattsan 1290 ST can cut up to 10-13 mm and engrave materials such as wood, cardboard, acrylic, glass, rubber, stone, wool, and more. Both laser heads operate simultaneously, with a minimum distance of 130 mm between them. The table on this model offers a lowering depth of 160 mm. Contact our managers for further details! Key Features of the Wattsan 1290 Duos LT: - Working area: 1200x900 mm - Laser power: 100-130 W Gbsdpfxsrvimxo Abdjg - Table lowering depth: 160 mm - Positioning accuracy: 0.03 mm - Machine size: 1410 x 1790 x 670 mm (+ 315 mm when mounted on wheels) - Packing dimensions: 1920 x 1630 x 820 mm - Weight: 393 kg Virmer not only offers top-quality machines, but also provides comprehensive service and delivery. Our engineers and managers are available to answer all your queries and offer video support if required. Additionally, owners of Wattsan machines receive lifetime online support. Based in the Netherlands and operating across Europe, Virmer is the official distributor for Wattsan. We supply not only laser engravers, but also metal cutters, welding equipment, marking machines, and cleaning devices. Wattsan is a Chinese manufacturer with nearly 15 years of experience in laser equipment production, continually improving through customer feedback. Wattsan has implemented over 50 modernizations to make their machines more reliable, precise, and powerful, empowering you to take your business to the next level. CONTACT US BY PHONE OR EMAIL! WE WILL SELECT THE RIGHT MACHINE FOR YOUR REQUIREMENTS.

Sąlyga: naujas, Gamybos metai: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with Coolant System B (Option 25) (comprising separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom-head emergency stop, reversing switch (for clockwise and counterclockwise operation), motor protection switch Stepless speed adjustment, digital speed display, Feed overload protection, protection class IP54, connection plug Spindle guard with electrical interlock Technical data: Drilling capacity steel E335 (St 60): 40 mm Tapping: Steel E335 (St 60): M24 Gsdpfod Hy Elsx Abdsbg Cast Iron EN-GJL-200 (GG20): M30 Short spindle: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable surface: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Distance spindle-table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Sąlyga: naudotas, Gamybos metai: 2004, Technical details: X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed range: 63 - 3,150 rpm Infinitely variable feed: 12-3000 / 6-1500 (Z) mm/min Quill stroke: 100 mm Swiveling head +/-: 90° Spindle taper ISO: SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Gedpfxok Hdu De Abdjbg Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with path control, mechanical handwheels, rotatable tilting table +/- 45°, hydraulic tool clamping, semi-enclosure, coolant tank, manual