Stulpelio gręžimo staklės

IBERDRILL BC-50 VE

Būklė: naujas, Drilling capacity in steel (diameter): 50 mm Drilling capacity in cast iron (diameter): 60 mm Tapping capacity: M42 Throat depth: 360 mm Quill stroke: 200 mm Spindle taper: MT 4 Spindle feed range: 0.1-0.2-0.3-0.4 mm/rev Spindle speeds: 190 - 1900 rpm Column diameter: 175 mm Table size: 550 x 550 mm Total power requirement: 4 kW Machine weight approx.: 0.85 t Space requirements approx.: 2.2 x 0.7 x 1.3 m Column Drilling Machines – V-belt/Gear Drive Combination - Wide infinitely variable speed range in 3 steps - Mechanical speed adjustment via manual lever (model V) - Electronic speed adjustment via frequency inverter (model VE) - Front-mounted digital speed display - Gear lubrication by automatic oil pump "VE" Crsdpfx Ajn Ea Tweb Hsh - Machine base with integrated coolant equipment - Work lamp - Swiveling and tilting table MGI - Power feed and automatic retraction with electromagnetic clutch - Front handwheel for fine adjustment of manual feed - Scale with adjustable drilling depth - Automatic feed reversal for tapping operations - Automatic tool ejector - Electrical controls integrated into the drill head - Emergency STOP pushbutton - Selector switch for clockwise/counter-clockwise rotation - Height-adjustable chip guard with microswitch - CE marking

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 9 350 mm, bendras plotis: 3 980 mm, bendras ilgis: 3 074 mm, keliamoji galia vienai sandėliavimo sekcijai: 380 kg, įėjimo įtampa: 400 V, 3 units in stock Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3650x864 Control: C3000, with B/W OP3000 display Serial Number: 06009822 Crjdpfjwgyxtex Ab Heh Year of Manufacture: 2006 Load per Tray: MediumX: 380 kg (evenly distributed) Tray Dimensions: 3650 x 864 mm Number of Trays: 48 units (more available on request) Shuttle Dimensions (W x D x H): 3980 x 3074 x 9350 mm (Kardex height is adjustable to available ceiling height) Power Supply: 3/N/PE 400 V, 17 A, 50/60 Hz, 8.6 kVA This offer is valid until sold Technical details per Shuttle: - Maximum total capacity of each KARDEX Shuttle XP: 2 x 32,700 kg - Maximum tray capacity: 48 trays, 380 kg each, evenly distributed. Additional trays available on request. - Tray dimensions: 3650 x 864 mm - Machine dimensions (W x D x H): 3980 x 3074 x 9350 mm - System footprint: approx. 12.23 m² - Capacity with 48 trays: approx. 151 m², each tray approx. 3.15 m² - Electronic volume measuring system with 25 mm grid display - Access opening with sliding doors for safety of persons and stored goods - C3000 control with B/W OP3000 display - LED anti-glare lighting above access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest picking speed Price: On request, only via email Price: excluding VAT, including transport, installation, and warranty Delivery time: available from stock Machinehandel De Leeuw BV is one of the few companies in Europe trading and stocking mainly used Kardex Remstar VLM automatic lift and rotary storage systems. Please check our website for the current stock. We install and/or dismantle these systems safely, using VCA-certified engineers—a service we have provided for more than 30 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Būklė: naudotas, Gamybos metai: 1968, Roller diameter: 500 mm Throat depth: 1050 / 485 mm Workpiece height: 300 mm Saw band length: 3920 - 4050 mm Cutting speed: 15 - 940 m/min Table height: 1040 mm Table area: 750 x 800 mm Table tilt: 15 degrees Total power requirement: 4.0 kW Machine weight approx. 1750 kg Space requirement approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angle - Mitre adjustment via lockable indexing every 15° Csdpjiqp Ersfx Ab Hjrh - Saw band adjustable for optimal cutting angle - Hydraulic vice on both sides - Electric band breakage monitoring system - Smooth-running saw carriage guided by preloaded linear ball guides - Additional table 450 x 450 mm - Machine lamp

Būklė: geras (naudotas), Manufacturer: STANKO Model: 7D430 Year of manufacture: 1994 Table rotation: 360° Head tilting up to 10° possible Large cabinet with slotting and keyway tools Lubrication system Completely overhauled in 1994 Credpfx Aewpud Aob Hoh Specifications Metric / US Standard Table diameter Ø: 630 mm Table load capacity: 1000 kg Ram stroke: 320 mm X-axis travel: 650 mm Y-axis travel: 510 mm Outreach: 500 mm Number of strokes: 3 – 38 strokes/min Power: 12 kW Dimensions (approximate): Length: 3000 mm Width: 2200 mm Height: 3000 mm Weight: 6150 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 2316-3, Ref. No. 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Cjdpfju Et Nbox Ab Horh Equipped with: - Thread cutting unit - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Būklė: geras (naudotas), NHH Lathe Model: 1N611N Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Digital readout Chuck diameter: 155 mm Spindle speed: 2000 rpm Dimensions: 150x85x155 cm (LxWxH) Crsdpsqgdkiefx Ab Heh

Būklė: naujas, Cutting diameter: 225 mm Bandsaw blade length: 2455 mm Table height: 850 mm Cutting width: 245 x 150 mm Credpegxi D Tefx Ab Hoh Cutting speed: 45/90 m/min Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 45° round: 145 mm Cutting capacity at 45° square: 145 mm Connection voltage: 400 Volt Total power requirement: 1.5 kW Machine weight: approx. 0.2 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Mitre bandsaw - Mitre cuts up to 60° to the left - Vice with quick-acting clamping device - Blade tension control - Electric coolant system

Būklė: naujas, Bernardo Panel Saw Topcut 3200 ER Technical Specifications Table dimensions: 1100 x 735 mm Sliding table: 3200 x 400 mm Cutting length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Outrigger table with roller: 1240 x 860 mm Main saw blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port diameter: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor input S6 40%: 7.5 kW (10.0 HP) Scoring motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Cedpfx Abed N S T Ds Herh Weight approx.: 850 kg Scope of Delivery • Electric saw blade height adjustment • Digital cut height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Length stop flaps • Outrigger table with roller • Push stick • Independently driven scoring unit • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running double roller carriage with central and end position lock for precise cuts • Maximum saw blade diameter 400 mm for cutting heights up to 125 mm • Outrigger table with roller for easier handling of larger workpieces • Fold-down rip fence with micrometric fine adjustment (advantageous for large panels) • Supplied as standard with separately driven scoring unit (motor power 0.75 kW) • Robust saw unit with double-sided pivot elements made of cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the outrigger table, infinitely adjustable from 90° to 45°

Būklė: labai geros būklės (naudotas), 1 permanent magnet chuck, diameter 315 mm, with mounting flange DIN 55027 size 6 Crodpfx Ajd Eaausb Hsh

Būklė: naudotas, Metal lathe Elmag, in good condition, approx. 1500 mm distance between centers, approx. 3000 kg. Subject to prior sale, price changes, errors, and typographical mistakes. Cedovrvmfepfx Ab Herh