Stručiai pirkti naudotą (58)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, Allgaier Screening Machine | Flat Sieve Machine Type ARSM 33-10 completely overhauled (workshop-refurbished) - Manufacturer: Allgaier - Type: ARSM 33-10 - Year of manufacture: 2005 - Condition: completely overhauled - Screening capacity: up to approx. 200 - 220 srm/h (when screening wood chips and sawdust) - Screening surface: 10.0 m² x 2 = 20 m² per mesh size - Fractions: 3 - Screening decks: 4 units + 1 intermediate deck - Drive power: 7.5 kW - Dimensions (L x W x H): 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 reseda green - Screens freely selectable - Discharge chutes designed to customer specifications Bdodpjq Iivasfx Af Asb Screening machine completely overhauled. Spherical roller bearings and spring struts are new. Suitable for screening, among others, the following bulk materials: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibratory screening machine | Stand-alone screen | Flat screen | Flat screening machine | Vibratory screen | Roll sifter | Screening machine for wood chips

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), IMMEDIATELY AVAILABLE!! Manual cleaning is performed using specially designed gloves in the front section. The cleaning effectiveness is ensured by a high-pressure pump and specialized spray nozzle. The cleaning fluid temperature can be set up to 60°C, and the pressure is adjustable from 1 to 80 bar. Technical Data: - Working surface: 950 x 700 mm - Internal height: 450 mm - Load capacity: 70 kg (optionally up to 150 kg) - Spray pressure: adjustable from 1–80 bar - Tank volume: 75 liters / Heating capacity 2 kW Standard Specification: • Blow-off pistol inside the chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel panels above the tank • Upward-opening lid with 2 access ports and gloves • Hardened glass window Bodpfx Afef A Nqqo Ajdb • Door opening/closing system with gas strut support • Door open monitoring via safety end switch • Filter at the pump’s suction side (500 micron) • Foot switch for operating the cleaning pump • Internal lighting • Neoprene gloves, length 600 mm (chemical resistant) • Height-adjustable feet +/- 50 mm • External mini pneumatic oil separator

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), IMMEDIATELY AVAILABLE!!!! Manual cleaning is performed using special gloves in the front working area. The effectiveness of the cleaning process is ensured by a high-pressure pump and a specialized spray nozzle. The cleaning fluid temperature can be set up to 60°C in these units. The pressure is adjustable from 1 to 80 bar. Bdsdpfx Aef A D Nmof Aeb Technical Data: Working surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg (optionally up to 150 kg) Spray pressure: adjustable from 1 to 80 bar Tank volume: 75 litres / Heating power: 2 kW Standard configuration: • Blow-off gun in the work chamber • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel covers above the tank • Upward-opening lid with two access ports and gloves • Hardened glass viewing window • Door opening/closing system with gas strut assistance • Door opening monitored by safety limit switch • Filter on the pump intake side (500 micron) • Foot switch for activating cleaning pump • Internal lighting • Neoprene gloves, L 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Stainless steel cartridge filter with pump (10/25/50 micron) • External mini pneumatic oil separator

Būklė: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 02-84-022, galia: 37 kW (50,31 AG), FOUR-SIDED MOULDER, 4 SPINDLES + UNIVERSAL SPINDLE, 2.5M TABLE & HEAVY-DUTY MOTORS Brand: CASADEI Model: MATRIX 4+1 Serial Number: 02-84-022 Year: 2002 WORKING CAPACITIES (thickness x width): 6 to 155 x 25 to 230 mm - Four-sided planer and moulder - Working width: 25 to 230 mm - Working height (wood thickness): 6 to 155 mm - Maximum finished wood section: 155 x 230 mm - Minimum working length: 480 mm - Adjustable cutting depth max: 10 mm - Spindle speed: 6000 rpm MOULDER CONFIGURATION: - Sturdy welded steel frame - Soundproof panoramic hood on gas struts - Raised control panel, operator side - Steel infeed table 2500 x 250 mm Floor height: 880 mm Spring-loaded lateral infeed pusher Manual lubrication unit for the table after planing 1) Bottom horizontal spindle 5.5 kW TERSA cutterhead Ø 125 x h.240 mm 1 retractable vertical pressure roller 2 & 3) Vertical spindles (right then left) 1 x 7.5 kW each TERSA cutterheads Ø 125 x h.165 mm 4) Top horizontal spindle 7.5 kW TERSA cutterhead Ø 125 x h.240 mm - Adjustable pressure shoe at output 5) Universal spindle 7.5 kW Ø 40 x 255 mm 1 retractable horizontal pressure roller FEED SYSTEM: - Variable feed speed: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) - 8 independent pneumatically-pressured feed rollers: 2+2 grooved steel, then 2+2 rubber-coated OTHER FEATURES: - CE marked - Main power supply: 380 V, 3-phase, 50 Hz - Lockable main switch, automatic star-delta starters Emergency stop front/rear - Installed power: 37 kW (50 HP) IN 62A - Braked motors - Spindle drive by cardan shafts - Digital indicators (Siko-type counters) for precise manual adjustment of each operation - Electric raise/lower of the beam for thickness adjustment Raise/lower motor: 0.37 kW - Axial adjustment of spindles: Bottom horizontal: 0 to 15 mm Top horizontal: 0 to 25 mm Verticals: 0 to 25 mm - Acceptable tool dimensions: Bedpfju Sr Ivsx Af Asdb On bottom horizontal spindle: Ø 120 to 140 mm On vertical spindles: Ø 100 to 180 mm On top horizontal spindle: Ø 100 to 180 mm End cutterhead: Ø140x12x40 mm - Recommended pneumatic supply: 7 bar Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connection: 1/2" G - Centralized upper extraction port: Ø 250 mm Required air speed: 25 m/sec minimum, Flowrate: 4500 m³/h - Technical manual included. - Machine equipped with 4 TERSA spindles Overall dimensions: 4700 x 1700 x h.1800 mm Weight: 2240 kg Contact us for consumables, accessories, and/or dust extraction systems.

Gamybos metai: 2024, būklė: beveik kaip naujas (parodų įrenginys), Manual cleaning is performed using special gloves in the front section. The cleaning performance is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these units. The pressure is adjustable from 1–80 bar. Technical Data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg (optionally up to 150 kg) Spray pressure: adjustable from 1–80 bar Tank volume: 75 liters / Heating power: 2 kW Basic configuration: • Frame, legs, lid, and housing made of stainless steel • Removable stainless steel plates above the tank • Upward-opening lid with 2 hand ports and gloves • Panel made from toughened safety glass • Door opening/closing system supported by gas struts Bodpfxjf A Nq Aj Af Aedb • Door opening monitoring via safety limit switch • Filter on the pump intake side (500 micron) • Foot switch for activating the cleaning pump • Interior lighting • Neoprene gloves L 600 mm (chemical-resistant) • Adjustable feet +/- 50 mm Options: • Stainless steel cartridge filter with pump (10/25/50 micron) • External mini pneumatic oil separator

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning process is ensured by a washing pump delivering 0–8 bar of pressure and a special spray nozzle. The cleaning fluid temperature can be set up to 60°C in these units. The pressure is adjustable from 0 to 8 bar. Bodpjr Hm R Tofx Af Aedb Technical specifications: - Working surface: 950 x 700 mm - Internal height: 450 mm - Load capacity: 70 kg - Spray pressure: Adjustable 0–8 bar - Tank capacity: 75 litres / Heating power: 2 kW Standard features: • Blow-off gun inside the chamber • Frame, legs, lid, and housing made from stainless steel • Removable stainless steel sheets above the tank • Top-opening lid with two access ports and gloves • Tempered glass viewing panel • Door opening/closing system with gas strut assistance • Door position monitoring with safety limit switch • Filter on the pump suction side (500 micron) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, L 600 mm (chemical resistant) • Adjustable feet, +/- 50 mm • Stainless steel candle filter with pump (10/25/50 micron) • External mini pneumatic oil separator

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 0803024, Funkcionalumas: visiškai funkcionalus, FOUR-SIDED MOULDER / PLANER 5 TOOL HOLDERS, HEAVY-DUTY MOTORS & 3.00 M CHROMED TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken prior to servicing & cleaning) MACHINING CAPACITIES: - Four-sided planer and moulder - Max section: 130 x 230 mm - Thickness: 10 to 130 mm - Width: 15 to 230 mm - Minimum workpiece length: 600 mm > 760 mm with universal spindle in use - Adjustable cutting depth: max 10 mm - Spindle speed: 6000 rpm COMPOSITION OF THE MOULDER: - Sturdy welded steel frame - Fully enclosed panoramic soundproof safety hood with gas struts and internal lighting - Digital counters (Siko type) for precise manual adjustment of each operation - Elevated operator-side control panel - Cast steel infeed table (L x W): 2980 x 255 mm Table height from floor: 900 mm - Lateral spring-loaded infeed pressure device - Digital display of cutting depth 1) Surfacing spindle 7.5 kW Tool holder: Ø125 x L.230 mm 2 & 3) Right and left vertical spindles 12 kW each Tool holder: Ø125 x L.130 mm 4) Independently adjustable top horizontal spindle 11 kW Tool holder: Ø125 x L.230 mm - Adjustable pressure shoe at outfeed 5) 360° universal spindle 11 kW Spindle: Ø50 x L.240 mm - Vertical pressure roller FEED SYSTEM: - Variable-speed feed: 6 to 24 m/min Feed motor: 3 kW - Steel helical infeed roller integrated into the table Cardan shaft drive - 7 pneumatic pressure rollers: 2 knurled steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller integrated in outfeed of planer OTHER FEATURES: - Power supply: 400V, 3-phase + earth, 50 Hz - Total installed power: 53 kW (72 HP), rated current 95.6A - Automatic star-delta starting - Brake motors - Toothed belt drive - Electric thickness adjustment by motorized beam lift/lower: 0.37 kW motor - Spindle diameter: Ø50 mm - Minimum working air pressure: 6 bar - Dust extraction: 5 x Ø120 mm Recommended flow rate: 6100 m³/h Speed: 20–28 m/sec depending on wood moisture - CE compliant - Lockable main switch, emergency stop buttons Bdjdov Tzw Espfx Af Aeb Operating dimensions (W x H): 3000 x 2250 mm Overall dimensions: 5100 x 2000 x H.1810 mm Weight: 4300 kg Machine is supplied with sharpened knives installed, manual, spare parts list, and diagrams. Please contact us for consumables, accessories and/or dust extraction systems. Upon order, the machine will be serviced, brought up to standard, and undergo dynamic functional testing. Comes with a 3-month warranty & certificate of compliance. Price excludes VAT and ex-works. Delivery and additional services upon request.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0803024, obliavimo aukštis: 130 mm, ašies skersmuo: 50 mm, obliavimo plotis: 230 mm, veleno greitis (maks.): 6 000 aps./min, The machine will be provided free loaded. TECHNICAL DETAILS Max. workpiece dimensions: 130 x 230 mm Thickness: 10 to 130 mm Widths: 15 to 230 mm Minimum length (single piece): 600 mm Minimum length (with use of universal lantern): 760 mm Maximum cutting depth: 10 mm Spindle speed: 6,000 rpm Spindle diameter: 50 mm MACHINE DETAILS Dimensions & Weight Operating dimensions (W x H): 3,000 x 2,250 mm Dimensions: 5,100 x 2,000 x 1,810 mm Weight: 4,300 kg General power supply: 400 V, three-phase + N, 50 Hz Installed power: 53 kW Current draw: 95.6 A Bsdoxa Dziepfx Af Aodb EQUIPMENT Five tool holders with reinforced motors 3.00 m chrome table Sound-insulated and secured covers with gas struts Digital counters (Siko type) for precise manual adjustment Raised, operator-side control panel Cast iron infeed table (L x W): 2,980 x 255 mm Spring-loaded side feed device Digital cutting depth indicators Five spindles with detailed power distribution Pneumatic pressure rollers Soft and drawn steel rollers Smooth steel outfeed roller Overhauled and installed knives Operating manual List of spare parts and wiring diagrams