Slėginis Bakas pirkti naudotą (959)

Sąlyga: naudotas, bakelio talpa: 1 350 l, GENERAL Design: suspended Remarks: Various technical documents available; tanks were previously suspended by the former operator in a ring with load cells, which was embedded in the floor (one ring each is included in the delivery; see photos) Speed: 412 rpm Outer diameter: 1,250 mm Inner diameter: 1,000 mm Total height: 2,650 mm Heating/Cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 140°C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: magnetic stirrer Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,350 litres Double-jacket volume: 80.0 litres Product-contact surface material: V4A 1.4435 (AISI316) Condition: used Cylinder height: 1,460 mm Last application: pharmaceutical TANK Max. operating temperature tank / °C: 130°C Lasdpfoxxiccsx Af Aji HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation material: mineral wool EQUIPMENT Manway / dome: on tank top Outlet: available Outlet (alternative entry): 50 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI304) AGITATOR Agitator manufacturer: MAVAG AG Voltage: 230/400 Volt Agitator arrangement: bottom-mounted TECHNICAL DATA / DIMENSIONS Top thickness: 4.5 mm

Sąlyga: naudotas, Pranešama, kad nenaudotas Eurovent Calmic modelis 45-S-19 su kontaktinėmis dalimis iš Hastelloy C22 slėginis lapinis filtras. Yra (19) 450 mm (18 colių) diametro horizontalių negilių plokščių. Filtravimo plotas 2,6 m² (28 ft²), nuosėdų talpa – 65 l (2,3 kub.ft). Nerūdijančio plieno vertikalus bakas su prispaudžiamu išgaubtu dangčiu. Vidinis projektinis slėgis: pilnas vakuumas/6 bar (87 psi), temperatūra: nuo -29 iki 175°C. Montuotas ant (3) kojų ant bazės, tinkamos pakėlimui krautuvu. Lasdpfx Afjxw Tcde Aoi

Sąlyga: naudotas, bakelio talpa: 130 l, BENDRAI Konstrukcija: vertikali Pastabos: Rankinės angos skersmuo apie 150 mm; viduje yra panardinamieji vamzdžiai; dalinai yra smulkių įlenkimų Vidinis skersmuo: 508 mm Bendras aukštis: 1 000 mm Ledpfx Afsxqc Nyj Ajai Maksimalus viršslėgis: 3,00 bar Vieta: Brėmenas Techninė dokumentacija: brėžinys Tipinė lentelė: Vakuumas: 1,00 bar Tūris: 130 litrų Cilindro sienelės storis: 2,5 mm Produktą liečianti medžiaga: V4A 1.4401/04 (AISI316) Būklė: naudotas Cilindrinis aukštis: 488 mm Paskutinė paskirtis: farmacijos pramonė TALPA Maksimali darbinė temperatūra (talpa/°C): 200 °C ĮRANGA Revizinis liukas / kupolas: rankinė anga Išleidimas: nėra TECHNINIAI DUOMENYS / MATMENYS Dangčių sienos storis: 2,5 mm

Sąlyga: naudotas, bakelio talpa: 750 l, GENERAL Design: vertical Notes: Top cover made from 1.4541 (V2A); metallic discoloration inside the tank; manhole in the top cover, diameter 350 mm External diameter: 900 mm Internal diameter: 790 mm Total height: 2,150 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.50 bar Base type: height-adjustable feet Laedpfexqc I Ajx Af Aji Location: Bremen Cylinder temperature control: double jacket Nameplate: Volume: 750 liters Double jacket volume: 80.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,230 mm Previous use: pharmaceuticals TANK Max. operating temperature tank / °C: 135 °C Number of feet: 3 pcs INSULATION Insulating jacket: bolted Insulating jacket material: stainless steel EQUIPMENT Manhole / dome: located in the top cover Outlet: DN50 DIN 11851 Note: slight residues, pressure marks on the insulating jacket MATERIAL SPECIFICATION Feet material: stainless steel

Sąlyga: naudotas, bakelio talpa: 1 235 l, BENDRA INFORMACIJA Konstrukcija: Konteineris Pastabos: Pneumatinis diskinis vožtuvas; talpos viduje privirinta vamzdynas (žr. nuotraukas); kūgio aukštis apie 530 mm; galimi nedideli skirtumai tarp konteinerių Vidinis skersmuo: 1 200 mm Bendras aukštis: 2 150 mm Maks. viršslėgis: 0,5 bar Pastatymo forma: Kojelės Vieta: Brėmenas Techninė dokumentacija: Brėžinys, įvairi dokumentacija, naudojimo instrukcija Tipinė lentelė: Vakuumas: 1,0 bar Tūris: 1 235 litrai Cilindro sienelės storis: 4 mm Gaminį liečianti medžiaga: V2A 1.4301 (AISI304) Būklė: naudota Cilindrinio korpuso aukštis: 660 mm Paskutinis panaudojimas: Farmacija TALPYKLA Maks. darbinė temperatūra / °C: 100 °C Lajdpfjxqc Iijx Af Aoi Apatinis dangtis: Kūginis dugnas Kojelių kiekis: 4 vnt. ĮRANGA Technologinė anga / inspeksinis liukas: viršutiniame dugne (DN 400) Išleidimo anga (alternatyvus įvedimas): 250 mm MEDŽIAGOS CHARAKTERISTIKA Kojelių medžiaga: Nerūdijantis plienas TECHNINIAI DUOMENYS / MATMENYS Dugno sienelės storis: 4 mm

Sąlyga: naudotas, bakelio talpa: 500 l, BENDRA INFORMACIJA Konstrukcijos tipas: vertikalus Pastabos: Lengvi skirtumai tarp talpų: pvz., 2 talpos mobili ant ratukų, likusios ant tvirtų rėmų iš V2A; maksimalus slėgis iš dalies 3 bar; skirtumai vyrio dangčio jungtyse; bendras aukštis iš dalies šiek tiek mažesnis (priklausomai nuo dangčio jungčių). Vidinis skersmuo: 800 mm Bendras aukštis: 1 780 mm Maks. viršslėgis: 2,5 bar Pastatymo tipas: rėmas Vieta: Brėmenas Tipinė lenta: Tūris: 500 litrų Prekei kontaktuojanti medžiaga: V4A 1.4435 (AISI316) Būklė: naudotas Paskutinis panaudojimas: farmacija ĮRANGA Vyris / liukas: viršuje (DN 400) Išleidimo anga: yra Ljdjxqc Hropfx Af Ajai MEDŽIAGOS KOKYBĖ Išorinis paviršius: šlifuotas Vidinis paviršius: šlifuotas

Sąlyga: naudotas, bakelio talpa: 1 600 l, BENDRA INFORMACIJA Konstrukcija: horizontali Pastabos: 4 nerūdijančio plieno kojos, prisukamos prie 4 nerūdijančio plieno tvirtinimo kojelių; žmogaus anga DN 400; nedideli metaliniai spalvos pakitimai viduje; yra daugiau techninės dokumentacijos Išorinis skersmuo: 1.060 mm Vidinis skersmuo: 900 mm Bendras aukštis: 2.100 mm Bendras ilgis: 2.700 mm Izoliacija: yra Maks. viršslėgis: 2,0 bar Stovėjimo tipas: kojomis Vieta: Brėmenas Techninė dokumentacija: brėžinys Tipinė lentelė: Vakuumas: 1,0 bar Tūris: 1.600 litrų Cilindro sienelės storis: 4 mm Medžiaga (produkto kontaktas): V4A 1.4435 (AISI316) Būklė: naudota Paskutinis naudotojas: farmacinė chemija TALPA Maksimali darbinė talpos temperatūra / °C: 95 °C Kojų skaičius: 4 vnt. IZOLIACIJA Izoliacinis gaubtas: kniedyta konstrukcija Izoliacinio gaubto medžiaga: aliuminis Lajdpfx Afsxqc Ezs Aoi ĮRANGA Žmogaus anga / liukas: ant talpos Išleidimo anga: flanšas DN65 Pastaba: įlenkimai izoliacijos gaubte, trūksta žmogaus angos dangčio MEDŽIAGOS YPATYBĖS Kojų medžiaga: nerūdijantis plienas TECHNINIAI DUOMENYS / MATMENYS Dugno sienelės storis: 4 mm

Sąlyga: naudotas, bakelio talpa: 15 000 l, BENDRA INFORMACIJA Įranga: purkštukas Konstrukcija: pastatoma Pastabos: Kojų tarpai sustiprinti paprastu plienu (žr. nuotraukas) Vidinis skersmuo: 2 200 mm Bendras aukštis: 5 900 mm Šildymas/aušinimas: yra Maks. leistina darbinė temperatūra: 3 °C Maks. leistinas darbinis viršslėgis: 2,0 bar Maks. viršslėgis: 1,0 bar Pastatymo tipas: kojos Vieta: Brėmenas Cilindro termostatavimas: pusiau vamzdinė spiralė Tipinė lentelė: Tūris: 15 000 l Dvigubo apvalkalo tūris: 30,0 l Cilindro sienelės storis: 3,5 mm Produkto kontaktinė medžiaga: V2A 1.4301 (AISI304) Būklė: naudota Cilindro aukštis: 3.360 mm Paskutinis panaudojimas: alaus darykla TALPA Ledpfx Afexqcpgo Aeai Maks. darbinė temperatūra talpai / °C: 25 °C Kojų skaičius: 3 vnt. APSAUGA Žmogaus anga / liukas: cilindre (apie 350 x 450 mm) Išleidimas: DN80 DIN 11851 Pastaba: lengvi prilipimai MEDŽIAGOS CHARAKTERISTIKA Kojų medžiaga: nerūdijantis plienas TECHNINIAI DUOMENYS / MATMENYS Dugno sienelės storis: 3,4 mm

Sąlyga: naudotas, bakelio talpa: 10 500 l, BENDRA INFORMACIJA Įranga: purškimo galvutė, krano kilpos Konstrukcija: vertikali Pastabos: 1 nerūdijančio plieno lakštas bako viduje apatinėje dalyje (žr. nuotraukas); sienelės storis apatinėje cilindro dalyje: 3 mm Vidinis skersmuo: 1 500 mm Bendras aukštis: 6 800 mm Maks. viršslėgis: 1,5 bar Pastatymo forma: reguliuojamo aukščio kojelės Vieta: Brėmenas Techninė dokumentacija: brėžinys, TÜV dokumentai, įvairi dokumentacija Tipinė lentelė: Tūris: 10 500 litrų Cilindro sienelės storis: 2,5 mm Medžiaga, kontaktuojanti su produktu: V2A 1.4301 (AISI304) Būklė: naudota Cilindrinis aukštis: 5 500 mm Paskutinis naudojimo tikslas: alaus darykla TALPA Maks. darbinė temperatūra talpai / °C: 20 °C Kojelių skaičius: 3 vnt. ĮRANGA Žmogaus anga / liukas: cilindre (apie 350 x 450 mm) Išleidimas: DN80 DIN 11851 Pastaba: spaudimo žymės ant cilindro MEDŽIAGOS RŪŠIS Kojelių medžiaga: nerūdijantis plienas Lajdpsxqcn Nefx Af Aji TECHNINIAI DUOMENYS / MATMENYS Apatinio dugno sienelės storis: 2,5 mm Viršutinio dugno sienelės storis: 2,1 mm

Sąlyga: naudotas, bakelio talpa: 130 l, BENDRA INFORMACIJA Konstrukcijos tipas: vertikali Pastabos: Rankinės angos skersmuo apie 150 mm; panardinimo vamzdžiai talpos viduje; dalinai nedideli įlenkimai Vidinis skersmuo: 490 mm Bendras aukštis: 980 mm Maks. viršslėgis: 1,50 bar Vieta: Bremenas Tipinė lentelė: Tūris: 130 litrų Gaminį liečianti medžiaga: V4A 1.4401/04 (AISI316) Būklė: naudotas Paskutinis naudojimas: farmacija TALPA Maks. darbinė temperatūra talpai / °C: 200 °C ĮRANGA Laodjxqcfzopfx Af Asi Žmogaus anga / kupolas: rankinė anga Išleidimas: nėra

Sąlyga: naudotas, bakelio talpa: 320 l, BENDRA INFORMACIJA Konstrukcijos tipas: Konteineris Pastabos: Konteinerio viduje – metalinės spalvos pakitimai (žr. nuotraukas); Rėmas iš V2A nerūdijančio plieno Vidinis skersmuo: 840 mm Bendras plotis: 870 mm Bendras aukštis: 1.000 mm Bendras ilgis: 1.180 mm Maks. viršslėgis: 0,50 bar Padėtis: ant rėmo Vieta: Brėmenas Tipinė lentelė: Vakuumas: 1,00 bar Tūris: 320 litrų Produktą liečianti medžiaga: V4A 1.4401/04 (AISI316) Ljdpfexqcbpjx Af Ajai Būklė: naudotas Cilindrinis aukštis: 300 mm Paskutinė paskirtis: Farmacija TALPYKLA Didžiausia darbinė temperatūra talpykloje / °C: 200 °C ĮRANGA Žmogaus anga / kupolas: viršutiniame dangtyje (DN 400) Išleidimas (alternatyvus įrašas): 20 mm

Sąlyga: naudotas, bakelio talpa: 2 330 l, GENERAL Equipment: Crane lugs Design: hanging Remarks: Double jacket made of V2A stainless steel around the lower cylinder section and bottom; 3 stainless steel lugs; parts of the insulation collar were cut off during dismantling; one vessel is not insulated (see photos) Lodpfx Aoxqb T Djf Ajai External diameter: 1,650 mm Internal diameter: 1,400 mm Total height: 2,150 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 3.2 bar Base type: lugs Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 2,330 liters Double jacket volume: 165.0 liters Cylinder wall thickness: 6 mm Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,130 mm Last application: Pharmaceutical chemicals VESSEL Max. operating temperature / °C: 200 °C HEATING/COOLING JACKET Max. allowable vacuum (double jacket/tube space) / bar: 1.0 bar Lower bottom temperature control: double jacket INSULATION Insulation jacket: riveted Insulation jacket material: aluminium EQUIPMENT Manhole/dome: in upper head (DN 400) Outlet: flange DN50 Note: dents on insulation jacket TECHNICAL DATA / DIMENSIONS Lower bottom wall thickness: 5.8 mm Upper bottom wall thickness: 7 mm

Sąlyga: naudotas, bakelio talpa: 1 100 l, GENERAL INFORMATION Equipment: Ball valve Design: Vertical Speed: 0 - 225 rpm Ledpfx Afoxqbk Aj Aoai Internal diameter: 1,200 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Total height: 2,400 mm Power: 1.85 kW Max. overpressure: 1.00 bar Agitator: Inclined blade agitator Base design: Feet Location: Bremen Technical documentation: Drawing Nameplate: Vacuum: 0.50 bar Volume: 1,100 litres Cylinder wall thickness: 4.0 mm Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 850 mm Previous application: Pharmaceuticals TANK Max. operating temperature (tank) / °C: 50 °C Number of feet: 4 pcs. EQUIPMENT Manhole / Dome: in top head (DN 400) Outlet: DN25 DIN 11851 MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR Voltage: 230/400 volts Agitator arrangement: Eccentric in the top head Agitator equipment: Agitator documentation available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.0 mm Top wall thickness: 4.0 mm

Sąlyga: naudotas, bakelio talpa: 630 l, GENERAL INFORMATION Design: suspended Ljdpfx Afexqba De Asai Notes: Support ring and vessel flange made of Fe; handhole cover plated Internal diameter: 1,000 mm Total height: 2,000 mm Heating/Cooling: available Max. permissible operating temperature: 300 °C Max. permissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top head: removable / hinged top head Agitator: anchor agitator Support shape: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 630 litres Jacket volume: 14.5 litres Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Last use: chemical industry VESSEL Max. operating temperature vessel / °C: 300 °C HEATING / COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: handhole Outlet: flange DN50 AGITATOR Agitator position: central in top head Agitator equipment: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Top wall thickness: 15.8 mm

Sąlyga: naudotas, bakelio talpa: 3 500 l, GENERAL Equipment: crane lugs Design: vertical Remarks: Armaflex insulation on the lid and upper cylindrical area (see photos) Speed: 395 rpm External diameter: 1,660 mm Internal diameter: 1,580 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be checked) Total height: 4,550 mm Heating/Cooling: available Power: 6.8 kW Max. permissible operating temperature: 15 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 4.00 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: propeller Base design: feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.00 bar Volume: 3,500 litres Double jacket volume: 320.0 litres Product contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 1,700 mm Last application: chemicals TANK Max. operating temperature tank / °C: 120 °C Number of feet: 4 pcs Lodsxqa Uyepfx Af Aeai HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: Flange DN50 Note: slight residues MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI 304) Feet material: steel AGITATOR Agitator manufacturer: Ekato Voltage: 400/690 volts Agitator arrangement: eccentric in the tank top Agitator equipment: protective cover over the motor housing is deformed

Sąlyga: naudotas, bakelio talpa: 650 l, GENERAL INFORMATION Equipment: spray head Design: upright Remarks: metallic discoloration inside Speed: 1415 RPM Outer diameter: 1,040 mm Inner diameter: 900 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX guidelines under local conditions must be verified) Total height: 2,380 mm Heating/Cooling: available Insulation: available Power: 1 KW Max. permissible operating temperature: 170 °C Max. permissible operating overpressure: 8.0 bar Max. overpressure: 1.50 bar Agitator: propeller type Support type: on feet Location: Bremen Technical documentation: drawing, acceptance certificate Cylinder temperature control: half-pipe coil Nameplate: Volume: 650 liters Cylinder wall thickness: 6.0 mm Jacket material: V2A 1.4301 (AISI304) Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 900 mm Previous application: pharmaceutical VESSEL Max. vessel operating temperature / °C: 170 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top (DN 400) Discharge (alternative entry): 25 mm MATERIAL QUALITY Feet material: stainless steel Laodoxqa T Njpfx Af Aji AGITATOR Voltage: 220/380 Volts Agitator arrangement: eccentric in top TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.0 mm

Sąlyga: naudotas, bakelio talpa: 265 l, GENERAL Design: vertical Remarks: Cone height approx. 1200 mm; handhole approx. 220 x 315 mm; handhole collar and handhole cover made of Fe; one vessel is missing the handhole cover; handhole cover fastenings are incomplete for the remaining vessels Speed: 90 - 546 rpm Explosion-proof: Motor is explosion-proof (compliance with the applicable ATEX regulations under local conditions must be verified) Total height: 3,350 mm Heating/Cooling: available Power: 1.5 kW Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 0.49 bar Max. overpressure: 20.5 bar Agitator: propeller Base type: feet Location: Bremen Nameplate: Volume: 265 liters Double jacket volume: 25.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: steel alloys VESSEL Max. operating temperature vessel / °C: 100 °C Bottom type: conical bottom Number of feet: 4 pcs HEATING/COOLING JACKET Base temperature control: double jacket EQUIPMENT Manhole/Dome: handhole Outlet: present Note: slight adhesions MATERIAL QUALITY Feet material: steel AGITATOR Voltage: 290/500 volts Agitator arrangement: eccentric on top plate Lsdpfxsxqa T As Af Aoai Agitator features: 1 agitator 59 - 363 rpm

Sąlyga: naudotas, bakelio talpa: 1 500 l, GENERAL Equipment: Ventilation, disc valve Design: upright Notes: Adjustable cap screws for the feet are missing; hand lever for the disc valve is missing; manhole cover not suitable for an operating pressure of 2 bar (the tank was last operated, probably as a non-pressurized vessel by the previous owner and the cover was replaced accordingly) Outer diameter: 1,300 mm Inner diameter: 1,150 mm Total height: 2,700 mm Heating/Cooling: equipped Insulation: present Max. permissible operating temperature: 20°C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.0 bar Agitator: agitator flange Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 1,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,550 mm Previous application: dairy TANK Max. tank operating temperature / °C: 120°C Bottom: flat bottom with slope Number of feet: 3 HEATING/COOLING JACKET Bottom temperature control: thermoplate INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel Lsdpfx Afsxqa Its Aoai EQUIPMENT Manhole / dome: in the top (Ø 430) Outlet: DN65 DIN 11851 Note: dents on the insulation jacket, functionality of the double jacket not tested MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator arrangement: eccentric in the top head

Sąlyga: naudotas, bakelio talpa: 11 424 l, GENERAL Equipment: Spray head, lifting lugs Design: vertical Remarks: Double jacket with sprinkle ring – suitable only for non-pressurized temperature control; dents in the double jacket; double jacket cladding partially detached in the area of the top head (see photos) Speed: 55 / 112 rpm Outer diameter: 2,140 mm Inner diameter: 2,000 mm Total height: 4,500 mm Heating/Cooling: available Power: 1.5 / 2.2 kW Max. overpressure: 3.2 bar Agitator type: Propeller Mounting type: Height-adjustable feet Location: Bremen Technical documentation: Drawing Cylinder temperature control: Double jacket Nameplate: Lasdpfx Afexqau Ho Aji Vacuum: 1.0 bar Volume: 11,424 liters Cylinder wall thickness: 6 mm Product-wetted material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Last intended use: Dairy TANK Max. operating temperature tank / °C: 145 °C Number of feet: 4 pcs HEATING/COOLING JACKET Base temperature control: Double jacket FITTINGS Manhole/Dome: in top head (Ø 450) Outlet (alternative entry): 48 mm Note: Light residues, outlet end cutoff MATERIAL CHARACTERISTICS Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel AGITATOR Voltage: 380 Volt Agitator arrangement: Side-mounted on cylinder TECHNICAL DATA / DIMENSIONS End plate thickness: 6 mm

Sąlyga: naudotas, bakelio talpa: 1 344 l, Location: Bremen Condition: used Volume: 1,344 liters Vacuum: 1.0 bar Max. overpressure: 3.0 bar Tank Max. operating temperature (tank): 150°C Design: vertical Tank Support design: Height-adjustable feet Number of feet: 3 pcs Heating/cooling: available Double jacket volume: 76.0 liters Max. permissible operating pressure: 2.0 bar Max. permissible operating temperature: 150°C Cylinder temperature control: double jacket Heating/cooling jacket Bottom temperature control: double jacket Insulation: available Insulation Insulation jacket: hermetically welded Material of insulation jacket: stainless steel Internal diameter: 1,180 mm External diameter: 1,350 mm Cylindrical height: 750 mm Overall height: 2,400 mm Technical data / dimensions Bottom wall thickness: 6.8 mm Cylinder wall thickness: 8 mm Technical data / dimensions Top wall thickness: 6 mm Technical documentation: drawing, TÜV certificates Equipment Manhole / dome: in top (DN 500) Lasdpfxsxqaqhs Af Aei Nameplate: Equipment: spray head, crane lugs Equipment Outlet: DN80 DIN 11851 Remarks: The tank was modified at the end of 2012 (nozzle welding and shortening of feet; TÜV test certificate available; the drawing included in the documentation is the original drawing; 1 dent in the insulation jacket) Last application: pharmaceuticals Product-contact material: V4A 1.4571 (AISI 316) Material specifications Temperature control system material: V2A 1.4301 (AISI 304) Feet material: stainless steel Agitator Agitator manufacturer: PRG Power: 0.33 / 1.85 kW Speed: 440 / 940 rpm Agitator: propeller type Shaft seal: mechanical seal with thermosiphon vessel Agitator Voltage: 380 V Agitator arrangement: eccentric, in top head

Sąlyga: naudotas, Gamybos metai: 2018, bakelio talpa: 500 l, Location: Bremen Condition: unused Volume: 500 liters Tank Max. operating temperature tank / °C: 150 °C Max. overpressure: 6.0 bar Vacuum: 1.0 bar Tank Specific gravity of medium (to/m³): 1.2 (to/m³) Bottom: dished base (Klöpperboden) Top: bolted lid Design: suspended Tank Support type: lugs (Pratzen) Heating/cooling: available Double jacket volume: 88.0 liters Max. permissible operating overpressure: 10.0 bar Heating/cooling jacket Max. permissible operating underpressure double jacket / tube space / bar: 1.0 bar Max. permissible operating temperature: 150 °C Cylinder temperature control: half-pipe coil Insulation: available Insulation Insulation jacket: hermetically welded Insulation jacket material: stainless steel Insulation thickness / mm: 50 mm Internal diameter: 780 mm External diameter: 960 mm Cylindrical height: 1,015 mm Technical data / dimensions Bottom wall thickness: 6.1 mm Cylinder wall thickness: 8.9 mm Technical data / dimensions Lasdpexqanmsfx Af Asi Top wall thickness: 4.3 mm Year of manufacture: 2018 Technical documentation: drawings, TÜV papers, inspection certificate, CE marking and declaration of conformity, operating manual Equipment Manway / Dome: handhole Nameplate: Equipment: spray head, crane lugs Equipment Outlet: available Remarks: Comprehensive documentation according to pharmaceutical industry standards included in delivery; the apparatus was manufactured for a global pharmaceutical company but never commissioned; handhole with sight glass, diameter: 285 mm Product contact material: V4A 1.4539 (AISI316) Agitator Agitator manufacturer: Zeta GmbH Power: 0.37 kW Speed: 408 rpm Agitator: magnetic agitator Agitator Voltage: 230/400 V Agitator arrangement: bottom entry Agitator equipment: magnetic agitator, presumably speed adjustable via external controller (not included) within 75 – 500 rpm

Sąlyga: naudotas, Gamybos metai: 2007, bakelio talpa: 880 l, Location: Bremen Condition: used Volume: 880 liters Vacuum: 1.0 bar Max. overpressure: 4.0 bar Ljdpexqanasfx Af Aoai Tank Max. Operating Temperature Tank / °C: 150 °C Top Cover: Removable / hinged top cover Design: vertical Tank Base Construction: Height-adjustable feet Number of feet: 3 pcs Heating/Cooling: available Double jacket volume: 41.0 liters Max. permissible operating overpressure: 6.0 bar Heating/Cooling Jacket Max. permissible negative pressure for double jacket / tube space / bar: 1.0 bar Max. permissible operating temperature: 150 °C Temperature control cylinder: double jacket Heating/Cooling Jacket Temperature control bottom: double jacket Insulation: available Insulation Insulation shell: hermetically welded Insulation material: mineral wool Insulation shell material: stainless steel Inner diameter: 900 mm Outer diameter: 1,060 mm Cylindrical height: 1,150 mm Total height: 2,300 mm Technical data / dimensions Wall thickness ends: 8 mm Wall thickness cylinder: 10 mm Year of manufacture: 2007 Technical documentation: drawing, various documents, CE marking, and declaration of conformity Nameplate: Equipment: spray head, crane lugs, control cabinet (without guarantee) Outlet: DN40 DIN 11851 Previous field of application: pharmaceuticals Product contact material: V4A 1.4401/04 (AISI316) Double jacket material: V2A 1.4301 (AISI304) Material properties Feet material: stainless steel Agitator Agitator manufacturer: PRG Power: 0.55 kW Speed: 329 rpm Agitator: magnetic stirrer Agitator Voltage: 230/400 Volt Agitator arrangement: bottom-mounted

Sąlyga: naudotas, Gamybos metai: 2007, bakelio talpa: 390 l, Location: Bremen Condition: used Volume: 390 liters Vacuum: 1.0 bar Lodpfxexqam As Af Ajai Max. Overpressure: 4.0 bar Tank Max. Operating Temperature, Tank / °C: 150 °C Top Head: removable / hinged Design: vertical Tank Support Type: height-adjustable feet Number of Feet: 3 pcs Heating/Cooling: available Double Jacket Volume: 26.0 liters Max. Permissible Operating Overpressure: 6.0 bar Heating/Cooling Jacket Max. Permissible Operating Vacuum Double Jacket / Tube Space / bar: 1.0 bar Max. Permissible Operating Temperature: 150 °C Cylinder Temperature Control: double jacket Heating/Cooling Jacket Bottom Temperature Control: double jacket Insulation: available Insulation Insulation Jacket: hermetically welded Insulation Material: mineral wool Insulation Jacket Material: stainless steel Insulation Thickness / mm: 50 mm Internal Diameter: 650 mm External Diameter: 810 mm Cylindrical Height: 990 mm Total Height: 2,050 mm Technical Data / Dimensions Bottom Plate Thickness: 6 mm Cylinder Wall Thickness: 8 mm Year of Manufacture: 2007 Technical Documentation: Drawing, various documents, CE marking and Declaration of Conformity Nameplate: Equipment: spray head, crane lugs, control cabinet (without guarantee) Equipment Outlet: DN40 DIN 11851 Remarks: 1 pump included in delivery (functionality not guaranteed) Last Intended Use: Pharmaceutical Product Contact Material: V4A 1.4401/04 (AISI316) Double Jacket Material: V2A 1.4301 (AISI304) Material Properties Foot Material: stainless steel Agitator Agitator Manufacturer: PRG Power: 0.37 kW Agitator: magnetic stirrer Agitator Voltage: 230/400 Volt

Sąlyga: naudotas, bakelio talpa: 5 530 l, GENERAL INFORMATION Laodpfx Afjxqamcs Aei Features: Spray head, crane lugs Design: vertical Remarks: Double jacket probably with sprinkling ring – only suitable for non-pressurized temperature control; the welding seam of the double jacket in the upper area is partially slightly detached; outlet diameter 65 mm (tapering to approx. 50 mm towards the vessel); minor dents inside the tank; heating connections cut off Speed: 15.5 / 31 rpm Outer diameter: 1,660 mm Inner diameter: 1,550 mm Total height: 4,350 mm Heating/cooling: available Power: 0.8 / 1.6 kW Max. overpressure: 3.2 bar Agitator: beam agitator Support design: height-adjustable feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,530 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Previous application: dairy TANK Max. operating temperature / °C: 145 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / dome: in top head (Ø 450) Outlet: available Note: outlet cut off MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Foot material: stainless steel AGITATOR Voltage: 380 V Bottom bearing: Agitator arrangement: eccentric in the top head

Veikimo valandos: 0 h, Sąlyga: paruoštas naudoti (naudotas), General Information Location: 15 x Bremen Condition: Used Tank Manufacturer: Stöcklin Capacity: 800 liters Maximum Overpressure: 1.0 bar Maximum Permissible Operating Temperature: 120°C Design: Container Base Design: Feet Number of Feet: 4 pcs Technical Data / Dimensions Internal Diameter: 1,000 mm Cylindrical Height: 700 mm Total Height: 1,590 mm Features Manhole/Dome: In top (DN 400) Nameplate: Included Equipment: Disc valve Laodpfxeftmnts Af Asi Outlet: DN50 DIN 11851 Note: Signs of use Remarks Containers available in various versions, therefore specifications may vary; minor dents possible Previous use: Food industry Material Specification Product-contact Material: V2A 1.4301 (AISI304) Feet Material: Stainless steel