Skalbimo Mašinos Dalyje pirkti naudotą (43 699)

Gamybos metai: 2000, būklė: naudotas, Spare parts for MORA Mü-Tos measuring machine: 2x measuring stands, 2x measuring control cabinets, and various other items. Fgjdpfsiuiausx Ac Dsa

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20250107, bendras ilgis: 2 000 mm, bendras plotis: 1 900 mm, bendras aukštis: 3 050 mm, bendras svoris: 1 000 kg, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, įėjimo dažnis: 50 Hz, šildymo galia: 24 kW (32,63 AG), garantijos trukmė: 12 mėnesiai, didžiausias leistinas svoris: 700 kg, ruošinio svoris (maks.): 700 kg, narvo dydis: 1 390 mm, Single-stage cleaning machine Operating principle, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the automatic filling valve AR-2) and heated by means of heating elements and thermostat settings. The time settings for the phases washing, dripping (optionally drying and steam extraction) are set via the “PROCESS TIMER”. The parts are placed on the loading rack or loading trolley and pushed into the cleaning chamber. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport parts into the cleaning cabin. The lifting door is closed, the machine is started, and the wash pump delivers the cleaning fluid onto the items to be cleaned via the rotating spray systems. The rotation of the upper and lower spray pipes is activated by the reaction force of the reaction nozzle located at one end of the spray pipe. The rotational speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes equipped with nozzles. After the washing time has elapsed, a short dripping phase follows, during which the used cleaning fluid is returned to the wash tank via the filter baskets. Optionally, the cleaning fluid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). An additional stage such as pre-washing or rinsing is optionally possible via the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated), which is drained via the drain valve. Optionally, the parts can be dried after cleaning using a drying unit. After the cleaning process, the lifting door is partially opened for steam extraction. The steam from the cleaning chamber is either extracted using the steam extractor (DF-250S) or condensed and returned to the tank via the steam condenser (FX6002). Both accessories are optional and not part of the standard machine equipment. After the steam extraction time has elapsed, the lifting door opens fully and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door if an object is detected in the doorway. The cleaned components can be removed from the cleaning cabinet onto a loading area or a loading trolley. Fgsdpevvuzcjfx Ac Dsa

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 07758, Siūlome šią pramoninę skalbimo mašiną Tonello 70 L1 ECOFREE 2 labai geros būklės, pagamintą 2018 metais. Gamintojas: Tonello Modelis: 70 L1 ECOFREE 2 Pagaminimo metai: 2018 Būklė: labai gera Kategorijos ID: 2065 Tipo ID: 1018 Tipas: pramoninė skalbimo mašina Fodpfjyt Hcwjx Ac Doga Jeigu turite klausimų arba reikia daugiau informacijos, nedvejodami parašykite mums žinutę arba paskambinkite.

Gamybos metai: 2019, būklė: paruoštas naudoti (naudotas), A belt washing machine for the pre-washing and feeding of food products into downstream machines is available. Infeed height: 1000 mm, outfeed height: 1000 mm, machine dimensions (L/W/H): approx. 4600 mm / 1500 mm / 1500 mm, weight: approx. 1000 kg. Documentation is available. An on-site inspection is possible. Fgedpfx Asu Tiyvsc Dja

Būklė: naujas, Gamybos metai: 2025, bendras plotis: 20 800 mm, bendras svoris: 600 kg, įėjimo įtampa: 400 V, įvesties srovės tipas: Nuolatinė srovė, įėjimo dažnis: 50 Hz, slėgis: 5 juosta, suslėgto oro jungtis: 6 juosta, elektrinė saugiklis: 32 A, galia: 0,004 kW (0,01 AG), didžiausias leistinas svoris: 350 kg, narvo dydis: 1 500 mm, - Naujas įrenginys visiškai iš nerūdijančio plieno, įskaitant plovimo siurblį - Automatinė krepšelio pavara - Mygtukas krepšelio sukimo valdymui už valymo procedūros ribų - Nerūdijančio plieno rezervuaro dangtis ir sietinis filtras po krepšiu - Apsisaugojimas nuo sauso veikimo - Durų saugos jungiklis - Jungtys plokščių fazių atskirtuvui (aliejų atskirtuvas) - Krepšelio vidinis plotis 1500 mm Fedsqpdlzjpfx Ac Dsga - Naudojamas aukštis nuo krepšelio iki purkštuko apatinio krašto – 750 mm - Plokščios srovės purkštukai - Plovimo slėgis 4,5 baro - Grįžtamasis lankas kaip kondensatorius mažam vandens sunaudojimui - Įskaičiuota 20 kg LCT Power Star 50-730 - Pristatymo terminas derinamas atskirai

Būklė: naudotas, Screws, hexagon head screws, flange nuts, hexagon nuts, collar nuts, washers, plain washers - Washers: plain washers, various sizes, total weight 276 kg - Sizes/Quantity: Ø10.5 to Ø31.5 mm, see photo for detailed item list - Price: for complete lot Fgjdpfx Aoirnwxec Doa - Total weight: 276 kg

Būklė: naujas, Gamybos metai: 2025, bendras svoris: 230 kg, vandens talpos tūris: 110 l, Workshop cabin washing system, manufactured from stainless steel AISI 304 and acid-resistant steel AISI 316, designed for professional use across various industries and in the automotive sector. It is used to remove heavy contaminations without damaging the surface of the cleaned component. The system operates in a closed loop at temperatures up to 45°C. The working table width is 150 cm. The washing system is equipped with a 110-liter tank, which can optionally be thermally insulated to prevent rapid cooling of the heated fluid. Cleaning efficiency is further enhanced by our proprietary XPOWER Active Cleaner fluid, which, together with the appropriate temperature and nozzle pressure from the spray gun, easily removes all types of dirt. Standard equipment includes a high-pressure lance up to 140 bar, an air blow gun, and a low-pressure overflow brush. The wash cabin is pneumatically lifted, with adjustable height, bright LED lighting, and air ventilation for the viewing window to ensure comfortable operation. The design and construction of the Master Cleaner MC1500 meet the highest quality standards according to ISO 9001 and environmental standards according to ISO 14001. Ideal for removing contaminants from steel, cast iron, and aluminum surfaces. The Master Cleaner MC1500 is fitted with a dedicated oil separator that effectively removes oil contamination from the water inside the washer's tank. EQUIPMENT: - High-pressure nozzle: 140 bar - Low-pressure brush: up to 5 L/min - Air blow gun: up to 8 bar - Air ventilation for viewing window - LED lighting - Pneumatic mechanism for cabin opening - Heated 110-liter tank - Dual liquid filtration - Oil separator - Sensors for fluid level and temperature - Adjustable feet: up to 100 mm - Dual footswitch - XPOWER Active Cleaner (5-liter starter pack) OPTIONAL FEATURES: - Rotating basket - Spray arm - Rotating nozzle - Nozzle for manifold cleaning - Thermal insulation for the tank TECHNICAL SPECIFICATIONS: - Weight: 230 kg - External dimensions – Open cabin (W x D x H): 175 x 85 x 235 cm - External dimensions – Closed cabin (W x D x H): 175 x 85 x 170 cm - Cabin dimensions (W x D x H): 150 x 64 x 65 cm - Heated liquid tank: 110 liters - Operating temperature: up to 45°C - Power supply: 3 x 400 V - Pneumatic supply: 6 – 8 bar - Maximum power: 7.5 kW - Pump operating pressure: 140 bar - Dual liquid filtration: Yes Fgjdpfori Rn Ujx Ac Dsa - High-pressure lance capacity: up to 15 L/min - Air connection: Pneumatic quick coupling DN7.2 plug - Manual washing with overflow brush: up to 5 L/min - Dual footswitch: Yes - Safety features: Temperature sensor, emergency stop switch, limit switch - Protection class: IP 54 - Declaration of conformity: CE MULTIPLE MODELS AVAILABLE – CONTACT US FOR MORE INFORMATION.

Būklė: labai geros būklės (naudotas), Rosink RFL Front Loader - Powerful water-based cleaning - Modular system - Cleaning of tall and long components - Simple operation, compact design - Low-maintenance operation - Standard system in stainless steel construction - Environmentally friendly Concept With the Rosink Front Loader RFL, we offer you an economical and user-friendly solution, especially suited for cleaning tall components. The proven Rosink cleaning technology and highest quality are thus combined in one system. The basic configuration is a single-bath system fitted as standard with a rotary table, which can be expanded to a multi-bath system upon request. Various programs such as washing, rinsing, drying, etc. can run within the wash chamber, depending on configuration and requirements. Equipment - Base system in stainless steel 1.4301 - Tank with sloped bottom - Tanks and wash chamber including cladding and insulation - Turntable drive with 4-point support - Pneumatic lift door operated by 2-hand safety controls - Transport trolley or loading table with drip tray, all in stainless steel 1.4301 - Pre-filtration via return filter baskets with usable height and selectable filter insert: 200 μm or 500 μm - Control panel at the front with PLC (5 programs can be stored) - Flat jet nozzle system entirely in stainless steel 1.4301 - Automatic refill system with level regulation of baths - Maintenance and inspection openings for wash and rinse tanks Technical Data - RFL 1650, variable depending on configuration - Width: 2900 mm Fedpfex Exuqjx Ac Dega - Height, closed/open: 2800/4500 mm - Depth without/with transport trolley: 2650/4500 mm - Grid load capacity: 1000 kg - Basket dimensions: 1320 x 1320 mm - Basket diagonal: 1650 mm - Connection voltage: 400 V, 50 Hz, 3Ph/N/PE - Control voltage: 24 V / DC - Detergent volume (washing): 750 l - Detergent volume (rinsing): 500 l - Pump capacity (washing): 7.5 kW with 630 l/min at 4.5 bar - Pump capacity (rinsing): 4 kW with 250 l/min at 5.5 bar - Drying: 12 kW - Heating power (cleaner): 36 kW - Heating power (rinsing): 27 kW - Weight: 3600 kg Financing through our banking partner is available as well. komplett-konzept.leasingo.de You can find more new and used items in our shop! International shipping costs on request!

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, JEROS 5110 ID-NR. 2926 Jeros Typ 5110 Geschirrspülmaschine in sehr gutem Zustand, zuvor in einer kleinen Fleischerei im Einsatz. Elektrische Beheizung, komplett aus Edelstahl gefertigt. Fgsdpfjv Iz Aqox Ac Dja Abmessungen: 80 x 75 cm, Höhe 160 cm.

Būklė: geras (naudotas), Jaw width, approx.: 200 mm Clamping range, approx.: 365 mm Dimensions LxWxH, approx.: 630 x 300 x 165 mm Weight, approx.: 75 kg Fedefbaq Hjpfx Ac Djga Ref. 0320276

Būklė: labai geros būklės (naudotas), Machine vice, mechanical. Jaw width, approx.: 200 mm Clamping range, approx.: 425 mm Fgoded Ttd Repfx Ac Dja Dimensions (LxWxH), approx.: 630 x 300 x 165 mm Weight, approx.: 75 kg Item no. 0320275

Būklė: naujas, Šildytuvai iš nerūdijančio plieno Korpusas iš nerūdijančio plieno AISI 304 Konvejerinė plovimo sistema Plovimo varikliai atitinka Europos standartus Pilnai aprūpinta sistema: išankstinis plovimas, plovimas, skalavimas ir džiovinimas Plovimas 55 °C vandeniu, skalavimas 80 °C vandeniu Fedsh Dwyxepfx Ac Doga Magnetiniai durų ir skalavimo jungikliai Elektromechaninė valdymo sistema Automatinė plovimo sustabdymo sistema, kai atidaromos durys Dvigubas, termoizoliuotas katilo rezervuaras Talpa iki 150 plastikinių dėžių, 60x40 cm Svoris: 220 kg Elektros galia: 32 kW Maitinimo įtampa: 380V AC 3N Įrenginio matmenys (cm): Plotis: 200 Ilgis: 80 Aukštis: 195 Pristatymo terminas: po avansinio apmokėjimo, nuo 10 iki 30 darbo dienų

Būklė: naudotas, Waschmaschine Hersteller: Nowicki Modell: MPU-600/1P Fsdpfx Aettz Urec Dega Gefertigt aus Edelstahl Abmessungen: 390x140x200 cm Elektrische Leistung: 7,7 kW Spannung: 3 x 400 V, 50 Hz Gewicht: 740 kg

Gamybos metai: 2019, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 10 mm, darbinis greitis: 50 mm/s, TECHNINĖ INFORMACIJA Minimalus apdirbimo dydis: 100 mm x 400 mm Apdirbimo storis: 2 - 10 mm Fgedpfxjyk Sgie Ac Doa Didžiausias greitis: 3 m/min ĮRENGINIO DUOMENYS Galia: 45 kW Matmenys Korpuso matmenys (I x P x A): 6.260 x 1.280 x 1.750 mm Valdymo spintos matmenys: 1.000 x 480 mm

Būklė: naujas, Gamybos metai: 2022, Daewoo, DAFL50A, 2022, maszyna szorująca, marka: Daewoo; model: DAFL50A; rok produkcji: 2022; NOWA; szerokość robocza: 850 mm; zasilanie: elektryczne; liczba godzin: 0 h; prostownik: tak; napięcie zasilania: 220 V; masa własna: 160 kg; wymiary całkowite (długość): 1100 mm; (szerokość): 540 mm; (wysokość): 1020 mm; opis: wbudowany prostownik, nieużywana, zasilanie bateryjne, w komplecie akumulatory; DOSTĘPNA W MAGAZYNIE W POLSCE Fsdpfx Ash Nuy Aoc Dsga

Gamybos metai: 2018, būklė: labai geros būklės (naudotas), I am selling a washing machine for sanding belts used on wide belt sanders by NETEK Denmark. Working width up to 1350 mm. Extends the service life of the sanding belts. Available immediately. Fgjdpjw Ancxefx Ac Doa

Būklė: geras (naudotas), ATTENTION: This is NOT a machinery sale, but ONLY spare parts for OPTIMA, TATAR, and MEGA POINT drill grinding machines! We also provide repair services for these machines! For instance, in the first photo, a NEW pointing unit has been installed! #OPTIMA, #TATAR, #drill grinder, #MEGA POINT, #spiral drill grinding machine, #BERGER, #drill, # A wide range of spare parts available: Including various NEW collets and chucks, grinding wheels, and other spare parts. As of January 1, 2016, BERGER technologie has taken over the spare parts inventory from HighTech OPTIMA AG. We are now able to offer original spare parts and service for OPTIMA and TATAR drill grinding machines. We look forward to your inquiries. Fedpfx Aocn Etwec Djga Please note: The images in this advertisement are for illustration purposes only!

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Manufacturer: Illig Model: HSA 50C The machine is incomplete and not operational! Fgsdpfxeuk Dwfs Ac Dsa For spare parts only!!

Būklė: naudotas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: div., Funkcionalumas: visiškai funkcionalus, 2x ROLLEX lyginimo presai, išankstiniam lyginimui (PRE-IRON); darbinis plotis: 2,25 m, Skalbimo mašinos / džiovyklės komplektas Skalbimo mašina Milnor; talpa: 65 kg; metai: 2004 + Džiovyklė Kannegiesser; talpa: 50 kg; metai: 2005 Fgedewpi Rkjpfx Ac Dsa + Džiovyklė Passat; talpa: 50 kg; metai: 1984

Būklė: labai geros būklės (naudotas), Acidbeständiger Abschnitt, mit Hochdruckdüsen, ausgestattet mit Förderband Gesamtmaße: 9,5 x 1,15 x 1,9 m Öffnungsgröße: 530 x 250 mm Chemikalientank (beheizt): 0,5 m³ Spültank (beheizt): 0,3 m³ Trocknungsgebläse: 12 Stück Fgodpfxjt Ity Dj Ac Doa Spannung: 380 V

Būklė: labai geros būklės (naudotas), Gamybos metai: 2024, veikimo valandos: 3 855 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1200F001894YW, Pakrovimo svoris: 115–128 kg Būgno talpa: 1154 l Užpildymo santykis: 1:10 – 1:9 Fodpfx Aow Nw Euoc Dsga Gręžimo greitis: 695 aps./min. G-faktorius: 350 Standartinė komplektacija: - Tiesioginio garo šildymas - Laisvai pastatoma, didelės apsukos - Mašinos korpusas iš chromo-nikelio plieno (AIS 304) - Vidinis ir išorinis būgnas iš chromo-nikelio plieno - Perforuotos vidinės briaunos / PowerWash - Didesnis mechaninis poveikis - Mažas vandens suvartojimas - Intuityvus jutiklinis valdymas XCONTROL FLEX PLUS

Būklė: visiškai atnaujintas (naudotas), The machine divides the dough into 30 uniform dough pieces and rounds them, resulting in high product quality. Fedpfevllnlox Ac Djga

Gamybos metai: 2006, būklė: reikia remonto (naudotas), Repak termoformavimo mašina, tipas: RE 25, mašinos numeris: 2500020, pagaminimo metai: 2006, 220/240 V, 3 fazės, 50 Hz, 12 kW, 30 A, štampai: (12x) 85 mm x 110 m. Atsarginės dalys pardavimui. 1 nuotrauka. Valdiklis, elektroninės dalys, įrankiai, vakuuminis siurblys, rėmo dalys ir kt. Komplektuojama su įvairių dydžių įrankiais. Būklė matoma nuotraukoje. Formavimo dalys pilnas komplektas – 4000 EUR. 2 nuotrauka. Flender variklis ZF48-M100LB4 – 250 EUR, 3 nuotrauka. Busch vakuuminis siurblys Wv1000B-001 KDFC – 1200 EUR, 4 nuotrauka. Automatinis 2 eilučių etikečių spausdintuvas ir padavėjas, pilnas komplektas – 1500 EUR, 5 nuotrauka. Rotacinis pjoviklis, kietas lakštas – 500 EUR, 6 nuotrauka. Išvedimo transporteris – 300 EUR, 8 nuotrauka. Parduodama kaip komplektas už 4000 EUR, toks, koks yra. Štampų komplektas pilnas – 2500 EUR. HMI ir elektroninės dalys. Kitos dalys. Fgsdpfju Hz Tdox Ac Doa

Būklė: naujas, Parts for SIDEL blow molding machine Ball bearings O-rings Fjdpfx Aeiqum Iec Dega Nozzle Belts Axle

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, - new slewing ring bearing - outer diameter 1100 mm - inner diameter 878 mm - height 50 mm - 8 x M16 mounting holes - renowned German manufacturer Fgodpjwt Ry Uofx Ac Dea - suitable for VK 26 models - available for immediate delivery