Žievės šalinimo mašina – atsarginė dalis

Valon Kone VK 26

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1974, Valonkone VK26M (Model year 1974) with outfeed table: - Main machine - Infeed table (powered) - Outfeed table - Control cabinet IMMEDIATELY available from stock Including infeed and outfeed table, workshop-inspected* - Debarking capacity: 10cm - 61cm diameter - 4 main separators - 4 debarking knives - Rotor speed = 235 rpm - Rotor opening = 65cm - 30 kW motor, speed 1500 rpm - Feed speed: 17-42m/min - 3m or longer (log length) Dimensions (without infeed and outfeed tables) L = 9840mm Infeed table: 3540mm x 1000mm x 1900mm Main machine VK26M: 2530mm x 2200mm x 2350mm Outfeed table (motorized): 3170mm x 1000mm x 1300mm REFURBISHMENT: Pos 1 1 Item: Machine disassembly, washing, sandblasting, priming and painting, repairs, assembly Pos 2 1 Material knife shafts on rotor, new bearings and seals (if required) Pos 3 5 5 Misc. material: piece V-belts for rotor drive Pos 4 1 Gear oil Pos 5 1 Material: abrasives + paints Pos 6 4 Valonkone-piece peeling knives Pos 7 4 Valonkone-piece pre-separators Pos 8 1 Control cabinet: with 3-phase delta start for 30 kW main motor Hedpfxetwrp Do Aftjfh with 3-phase delta start for 11 kW gear motor with start circuit for 4 kW gear motor (infeed) with start circuit for 4 kW gear motor (outfeed) Main starter Emergency STOP

Būklė: paruoštas naudoti (naudotas), Linia odzysku złomu z następującymi maszynami: Jedna dwutarczowa krajarka krawędziująca do desek Hodsgwqk Sspfx Aftefh Jedna jednowrzecionowa piła pozioma rozrzynająca System przenośników pomiędzy maszynami w komplecie.

Būklė: dilaminuotas dirbtuvėje (naudotas), B., VK26M (model series 1974) with powered outfeed table: - Main machine - Infeed table (powered) - Outfeed table - Control cabinet Including infeed and outfeed table, workshop inspected* Hfjdpjfn Iu Isfx Aftsh - Debarking capacity: 10 cm - 61 cm diameter - 4 main separators - 4 cutting knives - Rotor speed: 235 rpm - Rotor opening: 65 cm - 30 kW motor, speed 1500 rpm - Feed speed: 17-42 m/min - Wood length: 3 m or longer Dimensions (without infeed and outfeed table) L = 9840 mm Infeed table: 3540 mm x 1000 mm x 1900 mm Main machine VK26M: 2530 mm x 2200 mm x 2350 mm Outfeed table (motorised): 3170 mm x 1000 mm x 1300 mm REFURBISHMENT: Pos 1: Dismantling, washing, sandblasting, priming and painting, repair, assembly Pos 2: Material for knife shafts on rotor, new bearings and seals (if required) Pos 3: 5 pcs. v-belts for rotor drive Pos 4: Gear oil Pos 5: Material: abrasives + paint Pos 6: 4 pcs. Valonkone peeling knives Pos 7: 4 pcs. Valonkone pre-separators Pos 8: Control cabinet - with 3-phase delta start for 30 kW main motor - with 3-phase delta start for 11 kW gear motor - with start for 4 kW gear motor (infeed) - with start for 4 kW gear motor (outfeed) - main starter - emergency stop

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, approx. 4.5 m long feed and centering table Chain-driven from the feed motor Centers the round timber to the rotor axis Debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit Non-driven outfeed table Hsdsu Hmacopfx Aftofh Machine workshop-inspected Machine cleaned and newly painted

Būklė: geras (naudotas), Gamybos metai: 1994, 2-sided planer, top and bottom Constant table height (consistent infeed height) Max. planing width: 600 mm Hfjdpehuthyofx Aftjh Max. planing height: 280 mm Planer heads with strip knives Immediately ready for operation

Būklė: naudotas, Valon Kone VK26M Hsdpovgtz Nsfx Aftsfh Mit Einlauf- und Auslauf-Förderbändern.

Gamybos metai: 2006, būklė: beveik kaip naujas (naudotas), Pneumatic tipper and leveler for band saws. Hfjdpfedy A A Njx Aftoh

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2010, veikimo valandos: 34 616 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1244801, bendras svoris: 13 500 kg, rotoriaus skersmuo: 500 mm, peilių skaičius: 125, rotoriaus ilgis: 1 800 mm, įvesties srovės tipas: Oro kondicionierius, sietų perforacija: 30 mm, VECOPLAN Shredder Type VAZ 1800F, after complete overhaul, ready for operation. The machine is fully functional, with the following parts replaced: cutting system (knife holders, knives, counter-knives, rotor hardfacing), vibration isolators, slide rails, screen, gearbox oils, as well as the electrical, hydraulic, and pneumatic systems. Hodpfx Afevx Rtaotsfh

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 1 628 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 4 700 mm, laisvas kėlimas: 1 647 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 2 450 mm, šakių laikiklio plotis: 1 260 mm, tuščias svoris: 4 530 kg, pavaros tipas: Diesel, statybos plotis: 1 320 mm, Rough terrain forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: good Front tires type: pneumatic Front tires size: 275/70 R22.5 Front tires condition: 60 - 80% Rear tires type: pneumatic Rear tires size: 7.00-12 Rear tires condition: 60 - 80% Hfsdpevgh Ikefx Afteh Side shift, 3rd valve, front work lights, heater, particulate filter, full cabin, full free lift, CE certificate,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1981, WEINIG Hydromat H25R, S/N 2603-624, pagaminta 1981 m., su praeinama garso izoliacijos kabina KASCHWIG – beveik nauja, pagaminta 2017 m. • Trumpas įleidimo stalas su sunkiu 6 volelių įleidimu 1. apatinis velenas 11,0 kW 2. dešinysis velenas 11,0 kW 3. kairysis velenas 11,0 kW 4. viršutinis velenas 15,0 kW 5. apatinis velenas 11,0 kW 6. apatinis velenas 11,0 kW • Hidraulinė padavimo sistema 6-60 m/min. • Padavimo variklis 22,0 kW • 4 pavaromis varomi stalo volai • Veleno skersmuo 50 mm • Automatinis stalo tepimas • 1, 4, 5 ir 6 velenai su atraminiais guoliais • 1 ir 4 velenai su tiesia griovimo funkcija • Padavimo volai 170 mm • 4 vnt. hidroobliavimo galvų 150 mm • 6 vnt. hidroobliavimo galvų 250 mm Hedpfxjtkt Tps Aftjfh • Ištraukimo jungtis virš mašinos