Scm Record pirkti naudotą (615)

Būklė: geras (naudotas), Gamybos metai: 1997, mašinos/transporto priemonės numeris: AB/113309, Funkcionalumas: visiškai funkcionalus, galia: 4 kW (5,44 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, pjovimo aukštis (maks.): 95 mm, pjovimo plotis (maks.): 1 300 mm, pjūklo disko skersmuo: 300 mm, pjūklo disko nuolydžio reguliavimas: 45 °, aukščio reguliavimo tipas: mechaninis, pjūklų disko skylė: 30 mm, pavaros tipas: vadovas, sukimosi greitis (maks.): 4 000 aps./min, bendras plotis: 1 300 mm, bendras svoris: 750 kg, paskutinio kapitalinio remonto metai: 2025, Įranga: CE žymėjimas, dozatorius, pjūklo disko apsauga, SCM Si 320 Panel Saw Used Machine ID No. AB/113309, Year 1997 Article Number: JA_G260501 History The machine comes from a vocational school. A new saw was purchased in 2026 for investment reasons. The last maintenance was in 2025, during which belts and various small parts were replaced. Description Maximum cutting height at 90°: 95 mm Maximum saw blade diameter: 300 mm Adjustment: manual Scoring unit: yes Cutting width: 1300 mm Adjustment: manual Njdpfx Afey Uurqjaecu Sliding table length: 3200 mm Saw blade tilting: 0°–45° Adjustment: manual Angle stop: yes Power supply 400V / 50 Hz: 4.0 kW Speed: 4000 rpm Weight approx.: 750 kg Dust extraction ports: 100 + 80 mm Dimensions (L x W x H): 3600 x 2100 x 1400 mm Condition / Work Performed • Machine cleaned • Function tested • Wear and tear consistent with age and use • Available immediately from stock Errors and technical changes excepted. Note on Used Goods: • Prices are ex-works (unless stated otherwise!) From our location in Ottendorf-Okrilla, Germany – Loaded free of charge! (unless otherwise specified) • Subject to prior sale! • You will receive an invoice with VAT shown separately. • All items are purchased as seen, without any warranty claims. Buyers are welcome to inspect the items at our site. • Our general terms and conditions apply. • Special agreements are only valid if confirmed in writing. • Items shown in the background of photos are not included in the delivery. • Saw blades are for illustration purposes only and are not included in the scope of delivery. Shipping Options: • We are happy to provide a transport quote upon request. • Collection from our location in Ottendorf-Okrilla is free of charge by prior arrangement. (Assembly and product briefing for demonstration purposes available optionally upon request!) • Optionally, our trained service personnel can set up the machine at your site and provide a brief introduction. Travel, transport, and service times are charged extra.

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: AH005185, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, pavaros tipas: pneumatinis, bendras svoris: 5 500 kg, Įranga: CE žymėjimas, Parduodama labai gerai išlaikyta briaunų klijavimo staklė STEFANI SOLUTION 8000 Pagaminimo metai: 2008 Staklių ilgis: 11 000 mm Briaunos juostos storis: 0,5–16 mm Ruošinio storis: 10–60 mm Minimalus ruošinio plotis: 260 mm Maksimali greitis: 25 m/min (be pjūklų naudojimo) Agregatai: -Skyriklio tepimo įtaisas -Išankstinis frezavimas -Klijavimo blokas -Pjūklai -Apvalinimo įrenginiai (rondomatai) -Cikliniai įrenginiai -Šepečiai -Pjūklas griovelių darymui plokštumoje ir briaunoje Nedozdlabspfx Afaocu Staklės veikia. Dėl papildomos informacijos skambinkite.

Būklė: labai geros būklės (naudotas), Apatinio veleno frezavimo staklės SCM minimax tw 45c Nodpfx Aoy R Sgqefajcu Velenas rankiniu būdu reguliuojamas aukštyn-žemyn Velenas rankiniu būdu reguliuojamas nuo 0 iki 45 laipsnių kampu Ašis 30 mm skersmens Variklis 5 kW 3 sūkių greičiai Labai gera būklė, visiškai paruošta darbui

Būklė: naudotas, Gamybos metai: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED TOP CUTTING QUALITY FOR THE LONG TERM TELESCOPIC ARM: AN "UNBEATABLE" SMOOTH GUIDE SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 - Main saw blade diameter (mm): 550 - Panel cuts with extendable rip fence – with sliding table 3200 mm / 3800 mm: 3200x3200 / 3800x3200 - Saw blade tilting (degrees): 46 - Max. cutting height at 90° (mm): 200 Ncedpfxjxqtvqe Afaou - Max. cutting height at 45° (mm): 130 - Saw blade speed (rpm): 2500-3500-5000 - Scorer speed (rpm): 8500 - Extraction port diameter: - on frame: 120 mm - on saw blade guard: 100 mm - Main motor power [S6 -40%] 50Hz: 7 kW - Scorer motor power [S6 -40%] 50Hz: 0.9 kW - Cutting width at parallel fence (mm): 1600 Standard Equipment and Accessories - Optimizer/control flow app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It is activated with the QR code supplied with the machine. The app enables: * management of the machinery fleet, materials and stock * creation and editing of projects, import of projects from main furniture design software (file format "cpout"), import of cutting lists * optimization of cutting lists by selecting one or more proposals from the integrated optimization software * easy, intuitive setting of the machine for each cut using 3D sequence visualizations that guide the operator step by step * printing of barcode labels for part identification via Bluetooth connection to compatible label printers - 10-year guarantee on sliding table guide system - Sliding table in full aluminium design with roll-formed, hardened, and precision ground steel guides with large contact area - Max. saw blade diameter: * up to 450 mm with scorer blade mounted * up to 550 mm without scorer blade - eye-S 15" electronic control includes: * 15" touchscreen monitor * Direct control of the following axes in manual, semi-automatic, automatic and incremental modes: – main saw blade height adjustment – saw unit tilting – rip fence adjustment – scorer height and lateral adjustment (scorer moves automatically to set position on start and retracts on stop) * Operator assistance functions for complex cut operations * Storage for up to 1000 programs with related images * Storage for up to 1000 different tools with images * Process control for preloaded parametric machining programs * Environment for creating and storing new sequenced work programs * Automatic acquisition of work dimensions from Thundercut app * USB port * Network connection ready - Auxiliary functions of electronic control include: * Calculation of correct fence position for angled cuts with tilting blade * Calculation of correct fence position for mitre cuts using mitre gauge on work table, with or without tilting blade - Swivelling control panel above table - Independent scoring unit

Būklė: naudotas, Gamybos metai: 2001, Min./maks. darbinis plotis (galutinis matmuo): 23–180 mm Min./maks. darbinis aukštis (galutinis matmuo): 6–105 mm Min. ruošinio ilgis: 300 mm Padavimo greitis: 6–12 m/min Veleno apsisukimų dažnis: 6000 aps./min. Veleno skersmuo: 35 mm Horizontalio veleno variklio galia: 10 kW Vertikalio veleno variklio galia: 7,5 kW Padavimo variklio galia: 1 kW Padavimo volų skersmuo: 120 mm Ištraukimo jungties skersmuo 1 vnt.: 150 mm Ištraukimo jungties skersmuo 2 vnt.: 120 mm Svoris: apie 950 kg Sandėliavimo vieta: Tiekėjas Ncjdpeym D Eisfx Afaou

Būklė: labai geros būklės (naudotas), SCM SI 400 EP formatinio pjovimo staklės Stalas 320 cm, Nuolydis 0-45° motorinis reguliavimas, Disko kėlimo/nuleidimo motorinis reguliavimas, Dešinys liniuotė motorinė reguliacija iki 1500 mm, Priekinis pjūklelis reguliuojamas rankiniu būdu, Variklis 9 kW, 3 apsukų greičiai, Maksimalus disko skersmuo 400 mm, Stalo liniuotė reguliuojama kampu, Ncedpfsy Rzphox Afaeu Naudota staklė, labai gera būklė.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), obliavimo plotis: 500 mm, Dviguba obliavimo staklė Njdpsyu N Ulsfx Afaocu

Būklė: naudotas, Gamybos metai: 2013, bendras aukštis: 2 240 mm, bendras ilgis: 5 240 mm, bendras plotis: 2 500 mm, Unladen weight: 2,700 kg - Year of manufacture: 2013 Ncsdpfx Aswnii Rofasu - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: AA1/017355 - Number of milling spindles [pcs]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs]: 3 - - Max. spindle speed [rpm]: 24,000 - - Main motor power [kW]: 9.5 - Type of router table: Beam table - Drilling unit included: Yes - └ Horizontal drilling spindles [pcs]: 6 - └ Vertical drilling spindles [pcs]: 12 - Sawing unit included: Yes - System/software: SCM Maestro - Working area X [mm]: 3050 - Working area Y [mm]: 1250 - Z-axis working range [mm]: 1810 - Y-axis maximum stroke [mm]: 1550 - Voltage [V]: 400 - Power consumption [A]: 31 - Transport dimensions: 5240mm x 2500mm x 2244mm (L x W x H) - Transport weight [kg]: 2700 kg - Transport packages [pcs]: 1 Financial Information VAT: The stated price is net of VAT VAT/margin scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all types of industrial equipment Glenn Smeets

Būklė: naudotas, Gamybos metai: 2018, Color: White Price: On request CNC Machining Center SCM ACCORD 25 FX Brand: SCM Model: ACCORD 25 FX Year of manufacture: 2018 Machine no.: AA10000992 Processing table dimensions: 5020 x 1380 mm (LxW) Worktable equipped with 2 vacuum zones Worktable equipped with 2 reference cams Includes 8 reference stops and 8 supports XY vector speed: 35 m/min Axis movements Maximum speed X-axis: 25 m/min (per zone) Maximum speed X-axis: 90 m/min (per rapid traverse) Maximum speed Y-axis: 90 m/min Maximum speed Z-axis: 30 m/min Control unit Machine control: KVARA control Windows Embedded Standard 7-64bit Hard drive capacity: 500GB, 7200rpm Microprocessor: Intel Pentium 2.9GHz RAM: 8GB DDR4 XILOG MAESTRO software package Includes vacuum pump Motor power: 5.5 kW Pump output: 250 m³/h Maximum vacuum pressure: 0.9 bar Overall dimensions: 9000 x 4500 x 3000 mm (LxWxH) Total weight: 7,500 kg - Year of manufacture: 2018 - Documentation available: No - CE marking: Yes - CE certificate: No - Serial number: AA10000992 - Number of routing spindles: 2 - Routing spindle 1: - Number of controlled axes: 3 - Min. spindle speed: 6000 rpm - Max. spindle speed: 18000 rpm - Main motor power: 15 kW - Routing spindle 2: - Number of controlled axes: 3 - Min. spindle speed: 600 rpm - Max. spindle speed: 24000 rpm - Main motor power: 12 kW - Type of router table: Beam table - Tool clamping system: HSK-F63 Nedoycwupjpfx Afajcu - Tool changer positions: 12 - System/software: SCM Maestro - Safety feature: Bumper - Vacuum pump included: Yes - Quantity: 1 - Manufacturer: Becker - Main motor power: 5.5 kW - Capacity: 250 m³/h - CNC options: Waste conveyor - Table length: 5020 mm - Table width: 1380 mm - X-axis working area: 5020 mm - Y-axis working area: 1300 mm - Z-axis working area: 250 mm - X-axis maximum stroke: 5400 mm - Y-axis maximum stroke: 1650 mm - Z-axis maximum stroke: 450 mm Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for companies Delivery and trade-in possible at any time for all industrial equipment Glenn Smeets

Būklė: naudotas, Gamybos metai: 2015, bendras aukštis: 1 850 mm, bendras ilgis: 2 300 mm, bendras plotis: 1 950 mm, Color: White Ncedpfx Afjzavvgsaou Unladen weight: 1,240 kg - Year of manufacture: 2015 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs.]: 12 - Working area X [mm]: 3050 - Working area Y [mm]: 800 - Working area Z [mm]: 60 - X-axis maximum travel [mm]: 1040 - Y-axis maximum travel [mm]: 1030 - Z-axis maximum travel [mm]: 100 - Number of milling spindles [pcs.]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling machine: Yes - Horizontal drilling spindles [pcs.]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling machine: Yes - Vertical drilling spindles [pcs.]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety device: - Voltage [V]: 400 - Power consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Number of transport packages [pcs.]: 1 Financial Information VAT: The stated price is plus VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets

Būklė: naudotas, Ilgas stalas Ncodpfx Aozbxwpsfaou Stalo išplėtimas priekyje Skaitmeninis pozicionavimas 4 ritinėlių tiektuvas Variklis 7,5 kW 400V

Būklė: naudotas, Ilgas stalas Priekinis stalo praplėtimas Treneris Elektrinis vedlys Skaitmeninė ašis 400V Nsdpfxjzbxwco Afaocu

Būklė: naudotas, Gamybos metai: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Travel of X axis mm 750 Max. traverse speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Quantity 7 (4X-4Y, one shared) Horizontal spindles (Y axis) Quantity 2 (1+1) Horizontal spindles (X axis) Quantity 1 Fixed grooving saw (direction) X Saw blade diameter mm 100 Max. saw blade thickness mm 5 Motor output kW (HP) 1.5 (2) Spindle speed rpm 3350 Saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air velocity m/sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill shank D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1+1 drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor output 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece positioning and aggregate drive A CNC-controlled vacuum suction system clamps and positions the workpiece sequentially under the working unit during machining. X and Y axis movement is on THK guides with transmission via reinforced toothed belts. Z axis movement is pneumatic on ball-bushing guides with positioning via adjustable stops. Positioning of working units is achieved with DC technology and drives. CNC CONTROL The control was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen functionality - Alphanumeric keyboard - Self-diagnosis and operator language-specific error or fault messages Programming - Programming via CN - automatic optimization of drilling operations - Option for panel zero-point shift - Storage and import of drilling programs via USB dongle - Import of drilling programs from external CAD/CAM software Configuration - User interface in same language as instruction manuals Graphical representation of unit configuration Vacuum suction system "B-Power" Vacuum suction cup with double vacuum connector, recommended for highly porous panels (e.g. light MDF). Machine operation interface Software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; multicore processor recommended - RAM: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The code includes a DVD for installation and a USB key) Xilog Maestro features Programming - parametric, graphical programming - Supported programming with graphics and syntax assistance for drilling operations - Ability to create and save machining macros Integrated additional functions - Self-diagnosis and operator-language error or fault messages - User interface in Ncodovvi I Rspfx Afaeu

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Njdpfx Asvwbp Ajfajcu

Būklė: naudotas, Gamybos metai: 2011, Apdirbimo dydis X kryptimi: 2770 mm. Apdirbimo dydis Y kryptimi: 1220 mm. Apdirbimo storis (Z matmuo): 80 mm. Mašinos konstrukcija: portalo tipo staklės. Pagrindinio veleno galia: 11,0 kW. Pagrindinio veleno greitis: 1500–24000 aps./min. Vektoriškai valdomas velenas: taip. Tvirtinimo sistema: HSK 63 F. Veleno aušinimas: oro aušinimas. Ašių skaičius: 3. Įrankių keitiklis: taip, vnt. Įrankių keitimo vietų skaičius: 10 vnt. Rašomosios mašinėlės klaviatūra: taip. Pelė: taip. Programinė sistema: Xilog Plus. DXF sąsaja: taip. Galima prisijungti prie interneto: taip. CD-ROM įrenginys: taip. Stalo tipas: tinklelinis stalas. Atramų sistema: atraminiai cilindrai. Vakuuminių siurblių skaičius: 1. Vakuuminio siurblio galia: 250 m³/val. Apsauga: saugos kiliminiai takai. Sandėlio vieta: Sonnefeld Ncedpfxjvvi Htj Afaou

Būklė: naudotas, Gamybos metai: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Njdpfx Afovvi N Ieascu Drilling and milling made for you! The numerically controlled machining center is equipped with a comprehensive range of milling and drilling tools to meet any requirement in the processing of wood and similar materials. - Powerful drilling spindles with 8,000 rpm and proprietary technology, featuring the most robust spindle available on the market, with over 1,000 maintenance-free operating hours - Better equipped, with a wide range of configuration options via the multifunction table to optimally adapt the machine to specific requirements - Easier and more intuitive programming with the integrated Cad-Cam module MAESTRO CNC - User-friendly operation: the worktable is always accessible, the control cabinet and vacuum pump are integrated, and with the PRO SPACE configuration, there are no safety barriers Structural Frame The structural frame is composed of a particularly robust monolithic steel base, highly ribbed and extremely rigid; the exceptionally wide support surface has been specially designed to give the machine enhanced stability, ensuring lasting precision regardless of working conditions and eliminating the need for anchoring to the floor. The base provides a large and solid support for the moving gantry: the work unit is thus furnished with a balanced, stable, and resilient structure which withstands the highest loads, delivering superior performance and greater accuracy. The moving gantry is formed from a single robust component that is anchored to the base on both sides and glides on high-quality prismatic guides with recirculating ball carriages. Dual drives along the X-axis ensure maximum performance even under intensive workloads. Movement of the lower moving unit (X-axis) and the working unit along the beam of the moving unit (Y-axis) is accomplished via a helical rack and pinion drive; this provides greater tooth-to-tooth force, resulting in increased acceleration and higher speeds along both the X and Y axes. The specially designed helical gearing reduces mechanical wear and ensures quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance under dynamic loading and rapid acceleration/deceleration. The main milling unit is directly coupled to the carriage of the Z-axis, ensuring absolute finishing quality by completely eliminating vibration. Motion along each axis (X-Y-Z) is achieved using brushless motors powered by static inverters, providing: - Reduced processing times thanks to improved acceleration - Increased positioning accuracy with high-resolution encoders - Automatic zero-point referencing when the machine is powered on due to absolute encoders - Elimination of general maintenance associated with brushes, as the brushless system is maintenance-free Axis movement management and overall machine function control is performed via an industrial NS module with digital D

Būklė: naudotas, Gamybos metai: 1999, Sandėlio vieta: Nattheim Nsdevvi Rxspfx Afaecu

Būklė: naudotas, Gamybos metai: 2019, including tools: CNC-CONTROLLED MACHINING CENTER morbidelli m100 - Drilling and Milling Made for You! This numerically controlled machining center comes equipped with an extensive range of tools for milling and drilling, designed to meet any woodworking requirement. Ncjdpfjvvi Scsx Afaju - High Performance: Equipped with drilling spindles operating at 8,000 rpm and the most robust spindle technology available on the market, offering over 1,000 maintenance-free operating hours. - Fully and Optimally Equipped: Suction cups can be individually configured on the TV FLEX worktable, allowing the machine to be customized precisely to your needs. - Easy and intuitive programming thanks to the integrated Maestro CAD-CAM CNC software. - User-Friendly Operation: The lowered machine frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional safety enclosures are required. Supporting Structure: The support structure consists of an exceptionally strong monolithic steel base, heavily ribbed and highly robust. The particularly wide support surface was specially designed to ensure machine stability, providing consistent precision under all working conditions. No floor anchoring is required. The base forms a large and solid support for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support that withstands even the highest loads, ensuring superior quality performance and greater accuracy. The moving gantry is made from a solid single piece, anchored to the base and running on high-quality prismatic guides with recirculating ball-bearing carriages. The working unit is attached to this and moves along the Y and Z axes, also on prismatic guides with recirculating ball-bearing carriages. Movement of the lower moving unit (X-axis) and the working unit along the traverse of the moving unit (Y-axis) is achieved via a helical rack-and-pinion drive. This provides higher tooth-to-tooth power transfer for greater acceleration and increased speed along the X and Y axes. The specially designed helical gearing results in less wear of mechanical components and significantly quieter operation. The vertical Z-axis is powered by a ball screw, ensuring perfect balance under dynamic load, enabling high acceleration and deceleration. The main milling unit is directly mounted to the Z-axis carriage, providing extremely fine finishing quality by fully eliminating vibrations. Movement along the X-Y-Z axes is performed by brushless motors driven by static inverters, ensuring: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy due to high-resolution encoders - No need for setup procedures upon machine start-up due to absolute encoders - No routine maintenance because the brushless system eliminates brushes The machine’s axis movements and general device management are controlled via e

Būklė: naujas, Gamybos metai: 2026, CASADEI Libra 35 – Wide Belt Sander, Two-Belt Version Immediately available – Ex stock 54634 Bitburg Technical Data Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table adjustment motor power: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Photo shows optional equipment. Wide belt sander in two-belt version for widths up to 1100 mm, featuring a range of options suitable for cost-conscious workshops. Robust, tube-reinforced monoblock steel machine frame with high-mounted working units for maximum rigidity. User-friendly controls with clearly arranged front control panel. Motorized table height adjustment. Digital display for working height. Electronically regulated belt oscillation with reduced compressed air consumption. Automatic star-delta starting for the main motor. Natural rubber feed belt with negative profile. Feed table fitted with two rollers at the infeed and outfeed ends of the feed belt. Feed belt driven by gear motor, selectable between two speeds. Flexible steel pressure bar in front of the first unit. Rubber pressure rollers in front of and behind each working unit. Pneumatic belt tensioning per unit, with decimal correction for grit / belt thickness. Quality – Made in Europe. RTC Version 1st unit: diagonally grooved steel roller, Ø 120 mm, with fine adjustment for calibration. 2nd unit: combination unit with fine-adjustable working height for calibration and finish sanding, featuring a rubber-coated roller (Ø 120 mm, 45 Sh) and a hard sanding shoe with graphite lining on interchangeable insert. Scope of delivery: Table height adjustment with electronic height display Belt oscillation with electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-return feature (C.E.) Star-delta starting for the main motors Grooved calibration steel roller Selector switch for sanding shoe positioning from control panel Ncodpfx Ajcr S Ecofaju Accessories: – Semi-hard flat sanding shoe – Automatic belt centering Location: Ex stock Bitburg – Special price

Būklė: naujas, Gamybos metai: 2025, Dimensions and Weights Ncedpfx Afshkz E Tsaou Length approx. 2000 mm Width/Depth approx. 1110 mm Weight approx. 430 kg Joiner (Planing Table) Infeed table length: 1034 mm Maximum cutting depth: 5 mm Dust extraction connection Thicknesser extraction port diameter: 2 x 120 mm Thicknesser Minimum working height: 3 mm Maximum working height: 230 mm Maximum cutting depth: 5 mm Electrical Data Drive motor power: 5 kW Rated voltage: 400 V Network frequency: 50 Hz Cutterblock Type: TERSA Number of blades: 4 pcs Speed: 5,200 rpm Maximum planing width: 410 mm Feed Feed speed: 6 / 12 m/min The TERSA cutter system allows for exceptionally quiet operation. Helically grooved steel infeed roller ensures consistent and even material feed. Material feed with two selectable speeds. Digital height readout for thickness table. The 2,000 mm long jointer tables make it easy to plane large workpieces. Tables are made of cast iron, stress-relieved and annealed, ensuring stability and long-term flatness. Heavy-duty, large aluminium jointer fence with round bar guide (1200 x 160 mm). Thickness table adjustment via handwheel with numeric height display. The high machine weight delivers maximum precision and extremely smooth running. Powerful industrial-grade motor. Robust steel/cast iron construction. Equipment Details Jointer Fence Stable, large jointer fence made from aluminium (1200 x 160 mm), with precise round bar guide. Extraction Hose Connection The extraction ports for both jointer and thicknesser face the same direction during operation. This allows the extraction hose to be connected from the same side for both planing operations, requiring no hose routing around the machine. Planer Unit Helically-grooved steel infeed rollers assure a constant and uniform material feed. Heavy-duty anti-kickback fingers prevent workpiece kickback. Four-knife cutterblock provides optimal planing results. Chain Drive Robust chain drive design. Drive sprockets made of steel. Massive cast iron bearing block. Two Feed Speeds Standard with two feed rates, easily selectable from the operator’s panel. Material Feed Helically-grooved steel infeed rollers provide consistent, mark-free material feed. Multiple teeth engage simultaneously for powerful feed force. Wear-free compared to rubber infeed rollers. Thickness Table Adjustment Adjustment via handwheel, with numeric digital height display, accurate to 0.1 mm. Tersa Cutterblock No setting or screwing required—blade changes in seconds, self-locking, exceptionally quiet, perfect planing results. Location: Ex-stock 54634 Bitburg - immediately available - Subject to prior sale.

Būklė: naujas, Gamybos metai: 2025, FS 41 Classic Tersa – Surface & Thickness Planer with TERSA Quick-Change Knife System Features: - Equipped with TERSA cutterhead for fast, tool-free knife changes within seconds - TERSA knife system ensures particularly quiet operation - Helically grooved steel infeed roller for consistent and uniform material feed - Extra-long, one-piece surfacing tables allow for easy straightening of workpieces - Large, robust fence remains in position when opening surface tables Ncjdpfx Aocnxayofaou - Surface tables open to the rear for ergonomic access - High machine weight ensures maximum precision and vibration-free operation - Powerful industrial-grade motor - Heavy-duty steel and cast iron construction Model: FS 41 Classic Tersa Article No.: 5503414 Technical Data --- Surfacing (Jointer) Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. depth of cut: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min. Cutterhead diameter/knives: 72 mm / 3 pcs. Cutterhead speed: 5200 rpm Motor: 400V/50Hz/S6 40% power cycle, 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg TERSA Cutterhead - No adjustment or screwing required - Knife changes in seconds - Self-locking mechanism - Exceptionally quiet operation Cutter Block - Heavy-duty anti-kickback devices prevent material kickback - Tersa 3-knife cutterhead delivers optimal planing results Material Feed - Helically grooved steel feed rollers for constant and uniform wood feed without marking the material - 13 teeth simultaneously engage the workpiece for powerful feed - Wear-free compared to rubber feed rollers Dust Extraction Connection - Both surfacing and thicknessing extraction ports are aligned in the same direction - Hose connection is accessible from one side only - No hose routing required around the machine

Būklė: naujas, Gamybos metai: 2026, Maximum equipment for professionals. Multi-function combination machine with TERSA cutterblock, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is maintained even when the scoring saw blade is installed. Scoring unit with a separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from outside. High-precision sliding table made from anodised aluminium, running on hardened and milled steel guide rails. Large outrigger (1200 x 650 mm) with support roller and extendable aluminium telescopic stop, adjustable up to 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the back into the fence. Four spindle speeds. Nodpfx Aecnxa Sjfascu Spindle moulder with forward and reverse rotation. Quick conversion to thickness planer thanks to parallel opening surfacing tables. Two-speed feed on the thicknessing table. Helical steel infeed roller for consistent timber feed. Three independent industrial motors. With separate saw rip fence and separate jointing fence. With lockable main switch. Equipment details: Format fence Immediate control Outrigger Outrigger with angle-adjustable telescopic crosscut stop, with degree scale. Sliding table with ball-contact system Made from anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Rails are riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty on wear of the hardened guideways. Cast iron dual trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Located close to the saw blade, supported on both sides. Height and tilt adjustment up to 45°. Scoring unit as standard with separate scoring motor 0.55 kW. Dual trunnion spindle moulder unit Large dimensioned, tilting dual trunnion spindle moulder unit made of cast iron. Spindle fence Heavy-duty professional design. The high-quality cast iron spindle fence comes as standard with fine adjustment. 3-position for fast repeat settings. Fine adjustment via rack-and-pinion, numeric display, and aluminium fence faces. Planer units Helical steel infeed rollers for constant and even timber feed. Massive anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterblock ensures optimal planing finish. Table lips provide quieter operation. Tersa planing cutterblock No more setting and screwing. Cutter change in seconds. Self-locking. Particularly quiet. Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, ensuring maximum stability under all working conditions. A special lifting mechanism maintains the position of the table safely even without locking. Rip fence With fine adjustment and quick clamping. Stable round bar guide made of ground steel. Repositionable aluminium scale. No dimensional gap as guide rods are overlapping. Separate surfacing fence Large professional version (1800 x 150 mm). Tiltable 0–45°. With quick adjustment. Stable round bar guide made of ground steel. Simultaneous opening. Type: No. 5500557

Būklė: naujas, Gamybos metai: 2025, Motorized thickness table lift with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-threaded spindles for maximum stability and precision Four feed speeds Optional: Two rollers in the thickness table Standard noise and chip protection curtains at the infeed and outfeed Adjustable roller pressure Ncjdeff Efaspfx Afasu Front feed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment details Models TERSA with Tersa cutterhead Knife change in seconds When the machine starts, centrifugal force automatically tensions the knives – self-locking The knife projection is set automatically without the need for setting gauges Work table The work table is mounted on four large trapezoidal-threaded spindles, ensuring maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting mechanism, the table position is perfectly maintained even without locking Helically toothed steel infeed rollers ensure constant and uniform wood feed Second, rubber-coated feed roller at outfeed Massive anti-kickback devices prevent workpiece kickback A 4-knife cutterblock ensures optimal planing results Dimensions and weight Length approx. 1305 mm Width/depth approx. 1080 mm Weight approx. 750 kg Extraction connection Extraction port diameter thicknessing: 150 mm Drive power Main motor: 9 kW Installation information Space requirement length: 1305 mm Space requirement width/depth: 1080 mm Space requirement height: 1197 mm Explanation space requirement: Dimensions include maximum traversing paths or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Explanation working area: Please add the stated dimensions to the space requirement in order to get the recommended free setup area for the machine. Thicknessing Thickness table length: 630 mm Thickness table width: 1000 mm Min. working height: 3.5 mm Max. working height: 300 mm Min. working length: 210 mm Max. cutting depth: 8 mm Electrical data Connecting voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 4500 rpm Max. planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: In stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional trade machine featuring motorised height and tilt adjustment of the spindle, four speeds, and electronic control Article number 5502266 Brand Holzkraft / SCM EQUIPMENT Features Aluminium sliding carriage ✔ Handle on sliding carriage ✔ Fencing system FLEX ONE: heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual depth of cut adjustment, swing-away mechanism, aluminium fence jaws with connecting rails Spindle height adjustment motorised Nodpfshp Rc Isx Afajcu Telescopic mitre fence with two fold-away stops Spindle tilt adjustment motorised Extension table ✔ Control system Ready 3: programmed movement of the spindle unit on two axes, automatic adjustment of the entire fence according to tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece safety guard ✔ Position of control elements Operator panel at eye level, swivelling Excenter clamp TECHNICAL DATA Dimensions and Weight Length (product) approx. 1200 mm Net weight approx. 510 kg Width/Depth (product) approx. 2000 mm Extraction Connection Extraction port diameter 2 x 120 mm Working Table Working table length 1200 mm Sliding carriage length 1200 mm Working table width 530 mm Sliding carriage width 360 mm Table height 900 mm Sliding carriage height 142 mm Installation Information Space requirement length 2800 mm Machine body width/depth 846 mm Space requirement width/depth 2910 mm Working area length 1600 mm Space requirement explanation Dimensions include maximum traverse paths or usable lengths. Working area width/depth 2300 mm Machine body length 1200 mm Working area explanation Add the stated dimensions to the required space to get the recommended free installation area for the machine. Electrical Data Connection voltage 400V Drive motor power 5.0 kW Mains frequency 50 Hz Spindle Spindle tilt 0 to -45° Spindle speed display On control panel display Spindle usable length 125 mm Spindle shaft diameter 30 mm Spindle rotation speeds 3500/6000/8000/10000 rpm Maximum Cutter Diameters Max. cutter diameter 240 mm Max. profile mill diameter 240 mm Max. retractable cutter diameter 230 mm

Būklė: naujas, Gamybos metai: 2025, Woodworking Machines / Spindle Moulder Minimax twf55 es Item No.: 5502261 Robust steel and cast iron construction Anodized aluminum sliding table Large-scale milling unit made of cast iron, tiltable up to -45° to the rear Four milling speeds from 3,500 to 10,000 rpm Right- and left-hand rotation as standard Height and tilt display accurate to 1/10 mm Quick and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for long-lasting precision Powerful 5.0 kW industrial motor Curved milling protection hood included Made in Italy Dimensions and Weights Length (product): approx. 1200 mm Width/Depth (product): approx. 2000 mm Weight (net): approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Work table length: 1200 mm Nodpfoi Dphtox Afaecu Work table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Installation Information Required length: 2800 mm Required width/depth: 2910 mm Explanation required space: The dimensions take into account maximum travel or usable lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working area length: 1600 mm Working area width/depth: 2300 mm Explanation working area: Please add the specified measurements to the required space to determine the recommended free installation area for the machine. Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Drive motor power: 5.0 kW Spindle Spindle tilting: 0 to -45° Usable spindle length: 125 mm Spindle speed(s): 3500/6000/8000/10000 rpm Spindle speed display: LED on the machine front Spindle shaft diameter: 30 mm Max. Milling Tool Diameter Max. tool diameter: 240 mm Max. lowerable tool diameter: 230 mm Max. profile milling diameter: 240 mm Max. tenoning cutter diameter: 320 mm EQUIPMENT Equipment Aluminum sliding table: ✔ Spindle fence: Heavy‑duty professional version with hold-down, safety guard, and aluminum fence cheeks Telescopic mitre fence: with two flip stops Extension table: ✔ Curved milling guard: ✔ Eccentric clamp: ✔ Sliding table handle: ✔ Spindle height adjustment: manual Spindle tilt adjustment: manual Control: manual height and tilt adjustment of the milling unit Control element position: on the machine body Location: In stock at 54634 Bitburg - Available immediately -