Keturpusės obliavimo staklės SCM Compact XL

SCM Compact XL

Sąlyga: labai geros būklės (naudotas), Four-sided planer SCM Compact XL - Planing width: 23 cm - Planing height: 13 cm - Electrically adjustable top head and feed rollers Tsdpfx Aolat Hdeg Rsf - All spindles adjustable vertically and horizontally - Bottom spindle: 4 kW, right and left spindles each driven by a 7.5 kW motor, top spindle: 5.5 kW, universal spindle: 5.5 kW Machine in very good condition

Sąlyga: geras (naudotas), Gamybos metai: 1991, pjovimo plotis (maks.): 1 050 mm, pjovimo aukštis (maks.): 135 mm, pjūklo disko skersmuo: 400 mm, aukščio reguliavimo tipas: mechaninis, bendras svoris: 930 kg, galia: 5,5 kW (7,48 AG), Įranga: dozatorius, MAKA SC 3200 Sliding Table Panel Saw with Scoring Unit Manufacturer: MAKA/Griggio Technical Data: Sliding table length: 3200 mm Cutting length: 3300 mm Cutting width right of saw blade: 1050 mm Max. saw blade diameter: 400 mm Todpfx Aop H Tgbsg Rjf Max. cutting height: 135 mm Saw blade tiltable: 0-45° Cutting height at 45°: 90 mm (with 400 mm saw blade) Main motor: 5.5 kW / 400 Volt 3 speeds: 3,000 / 4,000 / 6,000 rpm Scoring unit motor: 0.75 kW Scoring blade diameter: 125 mm Extraction port: 120 mm Wide and narrow safety hood Dimensions: 3250 x 3100 x 830 mm Weight: 922 kg

Sąlyga: naujas, Gamybos metai: 2024, IN STOCK!!! Tsdpfxehymgdo Ag Rsf Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min. Weight: approx. 900 kg Max. total connected load: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min. Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combi milling unit Radius milling R=2 mm Corner radius milling R=2 mm Radius scraper R=2 mm

Sąlyga: naujas, CATALOG NUMBER HZ0001 PRODUCT FEATURES Standard equipment includes mobile sawdust containers fitted with a pressing system that ensures a tight connection between the container and the machine structure. This allows for high levels of negative pressure without losses at connection points. Contaminants from the filter fall directly into hermetically sealed containers, which enable quick unloading. These containers feature a special suspension system and mobile castors for easy and fast transport and maneuvering. Tjdpfx Ajdf S Szsg Ref The 5.5 kW / 6,500 m³/h negative pressure fan, operating at 2,800 Pa, works on a turbine principle. The sound-insulated fan design significantly reduces noise emission during operation. The certified control cabinet allows continuous monitoring of correct operation, with the flexibility to position it remotely from the machine. Standard version includes an integrated fan operation control system and a filtering fabric cleaning system. ADVANTAGES - New machine - CE certificate - High efficiency - Professional quality Scope of delivery: Polyester filter, 5 microns 2 containers Mobile undercarriage Filter cleaning system with vibration control TECHNICAL DATA - Extraction performance: approx. 6,500 m³/h - Motor power: 5.5 kW - Rotational speed: 3,000 rpm - Voltage: 400V, 50Hz - Extraction nozzle: 280 mm - Filter surface area: 16.3 m² - Extraction speed: 28 m/sec - Number of filters: 35 - Negative pressure: 2,800 Pa - Filter category: G - Filter material: polyester - Dimensions (L/W/H): 921x1982x2271 mm - Weight: 350 kg Net price: 16,000 PLN Net price: 3,810 EUR Net price calculated at exchange rate 4.2 PLN/EUR (for major exchange rate fluctuations, price may be subject to change)

Sąlyga: naudotas, Gamybos metai: 2018, Edgebanding machine AKV 3006 DK - F with jointing unit including DIA tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combination milling station Radius R 2.5 mm Technical Description: - Application of hot-melt adhesive to workpieces for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with disposable insert cutters (combination type) and fine adjustment of cutter from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Adjustable cutting depth for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate inspection windows from the rear and operator sides of the machine - PLC control including touchscreen Technical Data: Tjdpfxoxfh Tmj Ag Rjf - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm - Weight: approx. 1550 kg depending on configuration - Dimensions (L x W x H): 5250 x 1445 x 1600 mm - 2-point pneumatic cutter adjustment, 1 unit - Switching between radius / flush / chamfer on the combination milling stations - Switching between chamfer or flush is done manually by shifting the stop flap inside the machine - Buffing station (swab) 1 unit - Corner rounding cutter 1 unit including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 unit including pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 unit with pneumatic engagement control - Glue pot quick-change system including second glue pot with downward glue outflow, 1 unit for quick color changes - Horizontal grooving saw unit into the edge, 1 unit including pneumatic lifting device and groove tool - Separate extraction for jointing unit, 1 unit directly at the jointing unit, vertically upward d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onward - Ball bearing for corner rounding cutter 24.1 mm, 1 unit - Ball bearing for corner rounding cutter 24.2 mm, 1 unit - Interchangeable motor 0.37 kW for corner rounding cutter, 1 unit with quick-change device including radius cutter R 1 - Interchangeable spindles, 1 set = 2 pieces, 1 unit - Set of quick-change motors for longitudinal processing above and below, including tool R 1 - Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min Tsdpfovnv Uzjx Ag Rof 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: naudotas, Gamybos metai: 1998, Spaudimas 175 t Lenkimo ilgis 4050 mm Statramių atstumas 3050 mm Iškyša 300 mm Eiga 240 mm Eigos greitis – žemyn be apkrovos maks. 140 mm/sek Darbo greitis maks. 9 mm/sek Eigos greitis – grįžimas maks. 130 mm/sek Todpfx Agstv Rh As Rsf Atstumas tarp stalo ir slankiklio min. 370 – maks. 610 mm Valdymas CYBELEC DNC 880S Bendra galingumo paklausa 15 kW Staklių svoris apie 15 t Užimama vieta apie 5,89 x 3,6 x 3,16 m Įranga: - valdomos ašys: Y1, Y2, X, R - CNC bombiravimas - CYBELEC DNC 880S valdymas – pasukamas valdymo pultas, priekyje dešinėje - 4 rankiniu būdu reguliuojamos atraminės pirštos - Kojinis jungiklis - 1 viršutinio įrankio rinkinys - 1 apatinio įrankio rinkinys - 2 priekinės medžiagos atramos - Šoninė ir galinė apsauga - Naudojimo instrukcija

Gamybos metai: 1998, Sąlyga: paruoštas naudoti (naudotas), An angular unit for window and door production by Weinig is available. Maximum tool outer diameter: 320 mm, maximum tool cutting circle: 232 mm, slot spindle length: 640 mm, profiling and feed-synchro length: 285 mm – 320 mm, control: Siemens WS400. Includes complete tooling set and sash window components. Documentation available. Tedpfx Ajtq U A Ieg Rjf

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Longitudinal profiling machine for parquet flooring 4+4 motors Tsdpfxovxz Sye Ag Rsf Minimum working width: 80 mm M+F profile (Tongue & Groove)

Sąlyga: naudotas, Gamybos metai: 2006, Gamintojas: Weinig Modelis: Unimat Super 4 Pagaminimo metai: 2006 Keturių pusių obliavimo staklės Gamintojas: WEINIG, restauruotos Modelis: UNIMAT SUPER 4 su trumpų ruošinių mechanizacija EM15 - Pagaminimo metai: 2006 Techninės specifikacijos - Darbinis plotis: maks. 150 mm - Darbinis plotis: min. 25 mm - Darbinis aukštis: maks. 50 mm - Darbinis aukštis: min. 15 mm - Velenų skaičius: 3 - Viršutinio veleno galia: 22 kW - Apatinio veleno galia: 11 kW Tsdpfxsqprk Ts Ag Ref - Velenų apsisukimų skaičius: maks. 7.000 aps./min - Veleno skersmuo: 40 mm - Stalo ilgis: 2.000 mm - Maks. padavimo greitis: 24 m/min - Nuolatinis padavimo greičio reguliavimas - Atskiras variklis kiekvienam velenui - Padavimo volas su kardanine pavara - Padavimas iš žurnalo - Motorizuotas obliavimo aukščio reguliavimas - Automatinė tepimo pompa - WEINIG veidinio frezavimo galvutė - WEINIG EM 15 - Bendra galia: 45 kW