Scm 130 pirkti naudotą (575)

Sąlyga: naudotas, Gamybos metai: 2011, • Working area: 2,550 x 1,067 mm • X-Y travel path: 2,980 x 1,450 mm • Z-axis stroke length: 150 mm • Clearance height: 120 mm Drilling Unit F14: • Drilling head with 8 + 6 spindles • 5 individually selectable vertical spindles in X • 3 individually selectable vertical spindles in Y • 4 horizontal spindles in X (2+2) • 2 horizontal spindles in Y (1+1) • Speed: 4,000 rpm (6,000 rpm optional) • Power: 2.2 kW • Grid: 32 mm • Drill holder: M10 with 11 mm locating diameter • Pneumatic pre-stroke: 60 mm Grooving saw unit in X: • Integrated in the drilling head • Grooving saw blade diameter up to max. 120 mm Main milling unit: • Tool holder: HSK 63F • Speed: 1,500 – 24,000 rpm, infinitely variable via inverter • Motor power: 6.6 kW (9 HP) from 12,000 rpm (S1) • Motor power: 7.5 kW (10 HP) from 12,000 rpm (S6) • Right/left rotation • Ceramic bearings • Prepared for use with angle heads Tool changer TR10: Automatic side tool changer for 10 tools. • Number of tool positions: 10 • Max. tool diameter: 120 mm • Max. weight per tool: 4.5 kg • Max. total tool weight: 28 kg A central extraction nozzle combines all machining units into a single connection with D = 200 mm, reducing the required extraction capacity to approx. 3,200 m³/h. TVF worktable: The worktable is designed to guarantee maximum freedom of movement for the operator. The vacuum quick-clamping system offers maximum flexibility for precise positioning and optimal holding of workpieces. • 4 TVF supports L = 1,100 mm, infinitely adjustable in X • 12 TVF vacuum cups 120 x 120 mm, infinitely adjustable in Y • 2 stops in X (1 left / 1 right) • 1 stop per support in Y (total 4 pcs.) • The retractable reference stops are CNC-controlled Automatic central lubrication: The correct amount of lubricating grease is distributed via an electronic CNC control unit (X, Y, Z axes) Vacuum system (base machine): • Vacuum pump: 90 m³/h • Power: 2.2 kW • Max. vacuum (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - DXF file import - ASCII file import - User interface in the operator's native language Safety devices with bumpers Machine technical data: • Total connected load max.: 18 kW • Recommended circuit breaker: 64 A • Supply: 400 V 50-60 Hz • Compressed air: 6-7 bar • System pressure (recommended): 8 bar Hodpfoxy Ndijx Abmefr • Compressed air consumption: 200 Nl/min • Central extraction nozzle diameter: 200 mm • Extraction speed: 30 m/sec • Air consumption (central extraction): 3,200 m³/h • Vacuum: 3,000 Pascal • Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L = 1,100 mm and 18 vacuum cups 120 x 120 mm Cross laser for vacuum cup positioning Two cross lasers mounted on the unit carrier enable easy positioning of the vacuum cups. Location: Nattheim

Sąlyga: naudotas, Gamybos metai: 2007, Slotting spindle 3 pcs. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Control 100 PC SCM Windor 100 CNC - still in operation, available for inspection until end of December 2025 Powerful and flexible CNC processing line for windows and doors Processing of workpieces up to max. 4500 mm length, 250 mm width, and 150 mm thickness Comprising Windor 60 version B Hjdpfxsw Im Iio Abmofr Infeed conveyor Slotting section: Pos. 1: Crosscut saw - Motor: 4 kW - 3000 rpm - Spindle diameter: 40 mm - Max. tool diameter: 400 mm, bore: 80 mm Pos. 2: 1st slotting spindle - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3500 rpm - Max. tool diameter: 370 mm - Counter unit "Jolly" - Infinitely variable vertical positioning - Interpolating rotation, automatic tilting window setup +/- 60 degrees Pos. 3: Electrospindle with HSK 63 F tool holder - Min./max. rotational speed: 1000-12000 rpm - Max. motor power: 11 kW - Water cooling - Rapid 24 automatic tool changer, 24 positions Pos. 4: 2nd slotting spindle - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3500 rpm - Max. tool diameter: 370 mm - Counter unit "Jolly" - Infinitely variable vertical positioning - Interpolating rotation, automatic tilting window setup +/- 60 degrees Pos. 5: 3rd slotting spindle - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3500 rpm - Max. tool diameter: 370 mm - Counter unit "Jolly" - Infinitely variable vertical positioning Fleximat Including left and right stops with horizontal CNC adjustment for the following through-feed operations: Lock case routing and 9-degree Anuba drilling from the right. Dowel drilling and strike plate marking from left and right, 7 spindles each. Cup hinge drilling and olive drilling from above. Profiling section Pos. 5: Power 2000 F4: Electrospindle with HSK 63 F tool holder - Working from the left - Min./max. rotational speed: 1000-18000 rpm - Max. motor power: 12 kW - Water cooling - Rapid 24 automatic tool changer, 24 positions Pos. 6: 1st profiling spindle from the right - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6000 rpm - Tool diameter min./max.: 130-250 mm - Infinitely variable vertical positioning - Infinitely variable horizontal positioning Pos. 7: 2nd profiling spindle from the right - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6000 rpm - Tool diameter min./max.: 130-250 mm - Infinitely variable vertical positioning - Infinitely variable horizontal positioning Pos. 7: 3rd profiling spindle from the right - High-performance spindle with upper bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6000 rpm - ...

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 008047, Pozicija 1: Šepetėlinė mašina SCM-BRAVOROBOT P1 Pozicija 2: Dažymo mašina SCM-BRAVOROBOT P1 Pozicija 3: Perkėlimas SCM-BRAVOROBOT P1 Pozicija 4: Suslėgto oro džiovintuvas SCM-BRAVOROBOT P1 Pozicija 5: Lako džiovinimas SCM-BRAVOROBOT P1 Hfjdjw Idbyopfx Abmor

Sąlyga: naudotas, Gamybos metai: 2001, Price: On request What are presale items at Second Owner? Presale items are machines we sell in their current condition ("as-is"). We have purchased these machines solely based on photos and sell them with the information provided in the listing. Unfortunately, we do not have additional details such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Hfsdpfxexzcnke Abmor These machines are offered at attractive prices, meaning the prices are lower than usual, but the risk is entirely borne by the buyer. Please carefully review the information in the listing before making a purchase. If you have any questions, please feel free to contact us! - Year of manufacture: 2001 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: AA1/011994 Financial Information VAT: The quoted price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all types of industrial equipment Glenn Smeets

Sąlyga: labai geros būklės (naudotas), Obliavimo staklės SCM F520 Darbinis plotis: 520 mm 4 peilių velenas Tradiciniai peiliai Elektroninis darbo stalo pakėlimas ir nuleidimas Hsdpjxp Ic Njfx Abmsfr Pagrindinis liniuotė reguliuojama iki 45° Stalų ilgis: 3000 mm CE sertifikatas DTR dokumentacija

Sąlyga: geras (naudotas), Kodas: 0260 Gamintojas: DMC SCM GROUP Modelis: UNISAND 2000 – CE Standartas Automatinė plataus diržo šlifavimo staklė su 2 išilgine grupėmis ir 1 skersine grupe įėjimo zonoje, skirta baldams, stalių gaminiams, nestandartiniams baldams, plokštėms, medinėms durims, langų rėmams, pusgaminiai ir įvairūs gaminiai – atitinka CE standartą. Techniniai duomenys: Didžiausias apdirbimo plotis: 1350 mm Hfedox Dm Tvjpfx Abmor Mažiausias apdirbimo plotis: 52 mm Mažiausias ruošinio ilgis: 400 mm Minimalus/maksimalus apdirbimo aukštis: 4/170 mm Konvejerio diržo padavimo greitis reguliuojamas kintamu greičiu Išilginės abrazyvinės juostos matmenys: 1370 x 2620 mm Skersinės abrazyvinės juostos matmenys: 150 x 6550 mm Lameline juostos matmenys: 140 x 6300 mm Automatinis diržo centravimas Automatinis stalo pozicionavimas Skaitmeninis darbinio storio indikatorius Valdymo pultas su dulkėms atsparia membranine klaviatūra Elektroninė diržo osciliacijos sistema Guminiai spaudimo voleliai Automatinis diržo centravimas 1-a grupė: Skersinė šlifavimo pagalvėlė su 6550 mm ilgio eiga ir sumontuota lameline juosta, užtikrinančia stabilumą ir puikią abrazyvinio diržo tempimą Segmentuota elektroninė šlifavimo pagalvėlė „EPICS“ su „HYDRA“ elektroniniu valdymu, 46 segmentai, žingsnis – 30 mm LED ekranas darbo metu leidžia patikrinti aktyvių pagalvėlės segmentų veikimą Įrenginys aprūpintas pūstuvais abrazyvinės juostos valymui 2 greičių variklio galia: 12/15 kW Nusiurbimo traukos diametras: 160 mm Kombinuota išilginio kalibravimo/šlifavimo grupė su plieniniu voleliu ir segmentuota 46 sektorių elektronine „EPICS“ pagalvėle, žingsnis – 30 mm Skaitymo barjeras – 46 sektoriai Abrazyvinės juostos matmenys: 1370 x 2620 mm Volelio diametras: 220 mm Variklio galia: 15/18,5 kW Osciliaciniai pūstuvai su elektroniniu valdymu Segmentuota elektroninė šlifavimo pagalvėlė „EPICS“, 46 sektoriai, žingsnis – 30 mm Skaitymo barjeras – 46 sektoriai Variklio galia: 15 kW Osciliaciniai pūstuvai Scotch Brite satino volelis Diametras: 150 mm Variklio galia: 3 kW Nusiurbimo traukos diametras: 160 mm Vakuuminis stalas Elektroninis valdymas HYDRA 35 Suslėgto oro slėgis: 8 bar Surinktos staklės išmatavimai: 3200 x 2900 x 2400 mm (aukštis) Transportavimo išmatavimai: 3200 x 2300 x 2400 mm (aukštis) Svoris: 4400 kg

Sąlyga: naudotas, Gamybos metai: 2005, Darbo sritis: X=2970 mm / Y=1725 mm. Ašių judėjimo greičiai: X=60, Y=45, Z=25 m/min. Svoris: 3200 kg. Sandėlio vieta: Nattheim. Hfjdow Dcccspfx Abmer

Sąlyga: naudotas, Gamybos metai: 1994, Funkcionalumas: nepatikrintas, obliavimo aukštis: 120 mm, obliavimo plotis: 230 mm, bendras aukštis: 1 700 mm, bendras ilgis: 4 600 mm, bendras svoris: 3 550 kg, Staklė su 6 obliavimo velenų Hfjdev Dx Eujpfx Abmjr apačioje 4 kW, dešinėje 4 kW, kairėje 4 kW, viršuje 5,5 kW, viršuje 4 kW, apačioje 4 kW Darbinis plotis 25 - 230 mm Obliavimo aukštis 6 - 120 mm Padavimo greitis 5 - 35 m/min. Padavimo variklis 4 kW Veleno apsukos 6000 aps./min. Veleno skersmuo 40 mm Įleidžiamojo stalo ilgis 2000 mm Staklių svoris 3800 kg Matmenys I x P x A apie 4550 x 1700 x 1700 mm

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Apatinio veleno frezavimo staklės SCM T120C su vežimėliu Specifikacija: • būklė – naudota, po pilnos apžiūros • gamintojas – SCM • modelis – T120C • veleno skersmuo 35 mm (galimybė pakeisti į 30 mm – papildomai 1500 PLN) • variklio galia 4 kW • variklio paleidimas trikampis-žvaigždė • sukimosi kryptys – kairė/dešinė • 4 reguliuojami diržo greičiai: 2,9/4,4/6/7,2 tūkst. aps./min • rankinis aukščio reguliavimas • kojinis stabdis ir veleno užraktas • išilginis stalas, tinka taip pat dygiavimui, ilgis 105 cm • originali dažyta danga • matmenys 100 x 110 x 110 cm (ilgis x plotis x aukštis) Hedpfowthmxsx Abmofr Papildoma informacija: • labai gera gamyklinė techninė ir vizualinė būklė • pateiktos nuotraukos atspindi tikrąją parduodamo daikto būklę • galimybė įjungti ir patikrinti įrenginį vietoje.

Sąlyga: naudotas, Gamybos metai: 2016, bendras ilgis: 4 300 mm, bendras plotis: 1 880 mm, bendras aukštis: 2 350 mm, Savo svoris: 1 310 kg - Pagaminimo metai: 2016 - Dokumentacija prieinama: Ne - CE ženklinimas: Taip - CE sertifikatas prieinamas: Ne - Serijos numeris: AB/226310 - Transportavimo matmenys: 4300mm x 1880mm x 2350mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 1 310 kg - Transportavimo paketų [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir įrenginių priėmimas įmanomas bet kada bet kokiai pramoninei įrangai. Glenn Smeets Hsdpfx Ajxy Rk Rjbmsfr

Sąlyga: labai geros būklės (naudotas), SCM K201 HF Edge Bander Glue pot (granular adhesive) Pre-cutting guillotine Hodpfx Abetqu Nismsfr Flush trimming saw 2 top/bottom edge milling units 2 top/bottom polishing units

Sąlyga: naudotas, Gamybos metai: 2007, Judėjimo eiga: X=4400 Y=2195 Z=440 mm Darbinis laukas X=3650 mm Y=1560 mm Pralaidumas: 330 mm Elektros verpstė SCM Power 2000, didelės spartos frezavimo verpstė, 13 kW galia Sukimo ašis Vector (C ašis) Įrankio valymo pūstuvas frezavimo agregate Įrankio laikiklis HSK 63 F Sukimosi greitis 600–24 000 min⁻¹ bepakopis inverteriu Variklio galia 8,5 kW Įrankių laikikliai: 6 vnt. Įrankių keitiklis: Rapid 12 (12 vietų) Vakuuminis siurblys 250 m³/h, 5,5 kW Maksimalus vakuumas: 0,9 bar Stalo šoninis atskaitos taškas Gręžimo agregatas su 11 verpstėmis (7 vertikalios / 4 horizontalios) Valdymas: NUM serija 1000 Naudotojo sąsaja: XILOG Plus PC Office Aparatinė įranga WINDOWS XP Professional Bendra prijungimo galia: maks. 27,5 kW Svoris: 5200 kg Sandėliavimo vieta: Nattheim Hfodpfx Abow Dcb Ssmsr

Sąlyga: naudotas, Gamybos metai: 2012, Base Machine Olimpic K 800 "T-ERL" (47) 1 pc BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal support of working units - Swiveling control panel - Support roller conveyor with ball-bushing guides along the entire machine length - Protective and soundproof hood with separate doors between the glue and finishing units - Extraction nozzles placed on the soundproof hood - Electrical system with lockable main switch - Emergency stop buttons at both infeed and outfeed - Inverter for electric spindles PANEL FEED SYSTEM: - Feed chain with rubber glide pads, mounted on a 1 ¼ industrial chain with high friction coefficient - The chain runs on two guides made of hardened and ground steel, one round and one flat guide to guarantee straight feed and to protect against lateral offset - Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction and equipped with double rows of rollers and protective device for the pressure rollers - Manual lifting of the pressure system with automatic positioning of working units when changing panel thickness - Mechanical digital display for monitoring the selected panel thickness CONTROL: "ORION 100" Control device complete with PLC allows for fast, simple and error-free execution of individual processing programs (up to 60 programs). Manages the pneumatic positioning of units, if present on the machine. (The control system does not include pneumatic positioning features.) - Alphanumeric keypad and display - Function keys for quick control of processing units - Ambient temperature operating range 0 to +45°C MAIN FUNCTIONS - Control of processing units and automatic activation of motors - Monitoring and adjustment of glue pot temperature - Selection for longitudinal or transversal processing without program change - Simple, guided diagnostics for easy troubleshooting - Statistics on absolute data and individual operations: quantity, edge material consumption, total feed chain distance - Measurement units selectable in mm or inch Technical Data OLIMPIC K800 T-ER L Edging thickness: 0.4 to 8 mm Max. gluing thickness for edge tape: 3 mm Feed speed: 12/18 m/min Working height: 8 to 60 mm Max. edge section dimensions: 135 mm² Turntable diameter: 780 mm Max. excess compared to panel thickness: 4 (2+2) mm Min. panel width (with min. panel length 210 mm): 55 mm Min. panel length (with min. width 100 mm) - with strip or tape edging max. 3 mm: 140 mm - with solid wood edging: 200 mm Min. distance between successive panels at m/min 11 (16): 750 (850) mm Standard Equipment - Pre-milling unit at infeed RT-E - Gluing station VC-800 - End trimming unit KSEL - Flush trimming unit, tiltable RI/800 - Corner rounding unit ROUND K - Scraper unit RAS-V - ½ free space for surface scraper Hfsdpfxexq Apgo Abmor - 1 free space S for surface scraper or universal router or buffing unit - 1 free space F for air nozzle unit European safety regulations (CE mark) 1 pc Voltage 400 EU 1 pc Frequency 50 Hz "Autoset" for versions ER2, T-ERS and T-ERL 1 pc Allows all necessary adjustment operations to be performed from the control panel when switching between processing operations. Includes: - Time-controlled pressure system - Pneumatic and independent swiveling of the end trimming saw blades (front / rear) - Pneumatic remote adjustment for the flush trimming unit RI/800

Sąlyga: naudotas, Gamybos metai: 2022, Stumdomas stalas: 3200 mm, pjovimo plotis: 1000 mm, CNC lygiagretus atmušas, įpjovimo įrenginys, kampinis atmušas su skaitmeniniu ekranu, elektrinis palenkimas ir aukščio reguliavimas, valdymo pultas akių aukštyje. Sandėliavimo vieta: Nattheim. Hfjdpsxqtvqofx Abmsr

Sąlyga: naudotas, Gamybos metai: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Model: GABBIANI P80 Year of manufacture: 2023 1.00 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE GUARDS: MORE WORKSPACE FLOATING GRIPPERS: GUARANTEE FOR PERFECT CUTTING TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm: 80 Worktable height mm: 950 Standard number of grippers: 5 Number of grippers for versions 33/38/43: 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double finger included): 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm: 3300x2100 Version 33 (opt.) mm: 3300x3200 Version 38 mm: 3800x3200 Version 38 (opt.) mm: 3800x3800 Version 43 mm: 4300x3200 Version 43 (opt.) mm: 4300x4300 AXIS SPEEDS Variable saw carriage speed m/min: 6 – 60 Variable pusher speed m/min: 60 MAIN SAW BLADE Motor power (S6 - 40%) - 50Hz (star-delta start) kW (HP): 7 (9) (11) Speed – 50 Hz rpm: 4650 Saw blade diameter mm: 340 Main saw blade spindle diameter mm: 80 SCORING SAW Motor power (S6 - 40%) - 50Hz kW (HP): 1.5 (2) Speed – 50 Hz rpm: 5850 Scoring saw diameter mm: 200 Scoring saw blade spindle diameter mm: 80 INSTALLATION Installed power kW: 12÷15 Base machine voltage Euro voltage (400 V / 50 Hz) Compressed air demand NL/min: 300 Required compressed air pressure bar: 7 Extraction air requirement m³/h: 2440 Extraction air speed m/sec: 20 Extraction connection diameter mm: 4x120 Note: In countries where EC standards apply, the forward feed speed of the pusher is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for dividing panels of solid wood, MDF, chipboard, plywood, and similar materials. Machine frame and worktable - Machine frame constructed as a steel tube design - Worktable made of ribbed, reinforced steel with bakelite coating - Longitudinal fence on the left side Saw carriage made of steel, consisting of: - One motor for the main saw blade and one motor for the scoring blade - Vertical lift of the saw blade on linear ball guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the highest cutting quality - Running direction against the longitudinal fence - Saw carriage drive via rack and pinion - Carriage runs on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year warranty), protected by special dust wipers - Pneumatic switch for quick and safe change of the main saw blade and scorer Pressure beam - Pressure beam with uniform pressure on the workpiece along the entire cutting length with recesses to prevent collisions with the grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar - Dual extraction system with a unit above the pressure beam for cleaning the worktable and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Slides on linear ball guides and shoes. * Travel: 1200 mm * Minimum working width: 60 mm * Maximum working width: 1200 mm Position pusher and rear section of the machine - Position pusher over the entire length, motor-driven via robust shaft. Hjdpfx Abexyl U Romofr

Sąlyga: naudotas, Gamybos metai: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Travel of X axis mm 750 Max. traverse speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles Quantity 7 (4X-4Y, one shared) Horizontal spindles (Y axis) Quantity 2 (1+1) Horizontal spindles (X axis) Quantity 1 Fixed grooving saw (direction) X Saw blade diameter mm 100 Max. saw blade thickness mm 5 Motor output kW (HP) 1.5 (2) Spindle speed rpm 3350 Saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air velocity m/sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill shank D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1+1 drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor output 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece positioning and aggregate drive A CNC-controlled vacuum suction system clamps and positions the workpiece sequentially under the working unit during machining. X and Y axis movement is on THK guides with transmission via reinforced toothed belts. Z axis movement is pneumatic on ball-bushing guides with positioning via adjustable stops. Positioning of working units is achieved with DC technology and drives. CNC CONTROL The control was specially developed for use in drilling and milling machines. CN - 7" color display with touchscreen functionality - Alphanumeric keyboard - Self-diagnosis and operator language-specific error or fault messages Programming - Programming via CN - automatic optimization of drilling operations - Option for panel zero-point shift - Storage and import of drilling programs via USB dongle - Import of drilling programs from external CAD/CAM software Configuration - User interface in same language as instruction manuals Graphical representation of unit configuration Vacuum suction system "B-Power" Vacuum suction cup with double vacuum connector, recommended for highly porous panels (e.g. light MDF). Machine operation interface Software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; multicore processor recommended - RAM: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The code includes a DVD for installation and a USB key) Xilog Maestro features Programming - parametric, graphical programming - Supported programming with graphics and syntax assistance for drilling operations - Ability to create and save machining macros Integrated additional functions - Self-diagnosis and operator-language error or fault messages - User interface in Hjdpfsvvi I Rox Abmjfr

Sąlyga: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Hodpfjvwbp Aex Abmefr

Sąlyga: naudotas, Gamybos metai: 2011, Apdirbimo dydis X kryptimi: 2770 mm. Apdirbimo dydis Y kryptimi: 1220 mm. Apdirbimo storis (Z matmuo): 80 mm. Mašinos konstrukcija: portalo tipo staklės. Pagrindinio veleno galia: 11,0 kW. Pagrindinio veleno greitis: 1500–24000 aps./min. Vektoriškai valdomas velenas: taip. Tvirtinimo sistema: HSK 63 F. Veleno aušinimas: oro aušinimas. Ašių skaičius: 3. Įrankių keitiklis: taip, vnt. Įrankių keitimo vietų skaičius: 10 vnt. Rašomosios mašinėlės klaviatūra: taip. Pelė: taip. Programinė sistema: Xilog Plus. DXF sąsaja: taip. Galima prisijungti prie interneto: taip. CD-ROM įrenginys: taip. Stalo tipas: tinklelinis stalas. Atramų sistema: atraminiai cilindrai. Vakuuminių siurblių skaičius: 1. Vakuuminio siurblio galia: 250 m³/val. Apsauga: saugos kiliminiai takai. Sandėlio vieta: Sonnefeld Hedsvvi Htjpfx Abmofr

Sąlyga: naudotas, Gamybos metai: 2004, Sandėlio vieta: Nattheim Hodpevvi Hyofx Abmsfr

Sąlyga: naudotas, Gamybos metai: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Hfsdpfxevvi N Is Abmer Drilling and milling made for you! The numerically controlled machining center is equipped with a comprehensive range of milling and drilling tools to meet any requirement in the processing of wood and similar materials. - Powerful drilling spindles with 8,000 rpm and proprietary technology, featuring the most robust spindle available on the market, with over 1,000 maintenance-free operating hours - Better equipped, with a wide range of configuration options via the multifunction table to optimally adapt the machine to specific requirements - Easier and more intuitive programming with the integrated Cad-Cam module MAESTRO CNC - User-friendly operation: the worktable is always accessible, the control cabinet and vacuum pump are integrated, and with the PRO SPACE configuration, there are no safety barriers Structural Frame The structural frame is composed of a particularly robust monolithic steel base, highly ribbed and extremely rigid; the exceptionally wide support surface has been specially designed to give the machine enhanced stability, ensuring lasting precision regardless of working conditions and eliminating the need for anchoring to the floor. The base provides a large and solid support for the moving gantry: the work unit is thus furnished with a balanced, stable, and resilient structure which withstands the highest loads, delivering superior performance and greater accuracy. The moving gantry is formed from a single robust component that is anchored to the base on both sides and glides on high-quality prismatic guides with recirculating ball carriages. Dual drives along the X-axis ensure maximum performance even under intensive workloads. Movement of the lower moving unit (X-axis) and the working unit along the beam of the moving unit (Y-axis) is accomplished via a helical rack and pinion drive; this provides greater tooth-to-tooth force, resulting in increased acceleration and higher speeds along both the X and Y axes. The specially designed helical gearing reduces mechanical wear and ensures quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance under dynamic loading and rapid acceleration/deceleration. The main milling unit is directly coupled to the carriage of the Z-axis, ensuring absolute finishing quality by completely eliminating vibration. Motion along each axis (X-Y-Z) is achieved using brushless motors powered by static inverters, providing: - Reduced processing times thanks to improved acceleration - Increased positioning accuracy with high-resolution encoders - Automatic zero-point referencing when the machine is powered on due to absolute encoders - Elimination of general maintenance associated with brushes, as the brushless system is maintenance-free Axis movement management and overall machine function control is performed via an industrial NS module with digital D

Sąlyga: naudotas, Gamybos metai: 1999, Sandėlio vieta: Nattheim Hsdpfevvi Rxex Abmofr

Sąlyga: naudotas, Gamybos metai: 2019, including tools: CNC-CONTROLLED MACHINING CENTER morbidelli m100 - Drilling and Milling Made for You! This numerically controlled machining center comes equipped with an extensive range of tools for milling and drilling, designed to meet any woodworking requirement. - High Performance: Equipped with drilling spindles operating at 8,000 rpm and the most robust spindle technology available on the market, offering over 1,000 maintenance-free operating hours. - Fully and Optimally Equipped: Suction cups can be individually configured on the TV FLEX worktable, allowing the machine to be customized precisely to your needs. - Easy and intuitive programming thanks to the integrated Maestro CAD-CAM CNC software. - User-Friendly Operation: The lowered machine frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional safety enclosures are required. Supporting Structure: The support structure consists of an exceptionally strong monolithic steel base, heavily ribbed and highly robust. The particularly wide support surface was specially designed to ensure machine stability, providing consistent precision under all working conditions. No floor anchoring is required. The base forms a large and solid support for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support that withstands even the highest loads, ensuring superior quality performance and greater accuracy. The moving gantry is made from a solid single piece, anchored to the base and running on high-quality prismatic guides with recirculating ball-bearing carriages. The working unit is attached to this and moves along the Y and Z axes, also on prismatic guides with recirculating ball-bearing carriages. Movement of the lower moving unit (X-axis) and the working unit along the traverse of the moving unit (Y-axis) is achieved via a helical rack-and-pinion drive. This provides higher tooth-to-tooth power transfer for greater acceleration and increased speed along the X and Y axes. The specially designed helical gearing results in less wear of mechanical components and significantly quieter operation. The vertical Z-axis is powered by a ball screw, ensuring perfect balance under dynamic load, enabling high acceleration and deceleration. The main milling unit is directly mounted to the Z-axis carriage, providing extremely fine finishing quality by fully eliminating vibrations. Movement along the X-Y-Z axes is performed by brushless motors driven by static inverters, ensuring: Hfedpfx Asvvi Scebmer - Reduced processing times thanks to improved acceleration - Greater positioning accuracy due to high-resolution encoders - No need for setup procedures upon machine start-up due to absolute encoders - No routine maintenance because the brushless system eliminates brushes The machine’s axis movements and general device management are controlled via e

Sąlyga: naudotas, Sandėlio vieta: Nattheim Hfjdswkirqopfx Abmer

Sąlyga: naudotas, Gamybos metai: 2022, įsk. 2 klijų vonelę Klijavimo storis ritininėms briaunoms: 0,4 - 3 mm Klijavimo storis juostinėms briaunoms: 5 mm Min - maks. ruošinio aukštis: 8 - 50 mm Padvėrimo greitis: 9 m/min. Priešfrezavimo agregatas Klijavimo agregatas Nupjovimo agregatas Apvalinimo agregatas Lyginantis frezas Spindulio grandiklis Plokštuminis grandiklis Poliravimo agregatas Purškimo įrenginys Sandėliavimo vieta: klientas Hjdpow Aig Sofx Abmsfr

Sąlyga: naudotas, Gamybos metai: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis traverse: 200 mm. Clearance height: 180 mm. The main body structure is a monolithic design made of thick-walled steel. It is reinforced throughout the machine bed with welded-in triangular plates, making it extremely stable. The triangular shape with a broad base, used for load-bearing parts, is the key to ensuring sustained precision and stability. The machine layout allows the operator to optimize workflow with a minimal footprint. This main body provides the processing unit with a balanced and secure foundation, featuring outstanding load distribution. The moving aggregate carrier is manufactured as a solid monoblock. It is positioned in the X-direction on ground, prismatic linear guides using recirculating ball carriages. The working unit is also mounted on these ground prismatic guides and ball carriages on the mobile aggregate carrier. Description of aggregates and basic accessories: Drilling unit: Drilling head with 10 + 4 spindles Hfsdsw Aifzjpfx Abmor • 6 individually selectable vertical spindles in X • 4 individually selectable vertical spindles in Y • 2 horizontal spindles in X (1+1) • 2 horizontal spindles in Y (1+1) • Speed: 4,000 rpm • Power: 2.2 kW • Pitch: 32 mm • Chuck: M10 with 11 mm seating • Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): • Tool holder HSK 63F • Speed: 1,500 – 24,000 rpm, stepless via inverter • Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) • CW/CCW rotation • Ceramic bearings • Scope of delivery: 4x tool holders (right) without collet Tool changer: • Side-mounted 7-position tool magazine (TR7), fully enclosed against chip projection • 7 tool slots for HSK 63F tool holders in a row • Max. tool diameter D = 120 mm • Max. weight per tool holder 4.5 kg • Max. total tool weight 20 kg (TR7) • Angular gear units can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposed outputs for milling and grooving. • Speed: 9,000 – 18,000 rpm, stepless via inverter • 1 output for collet 3-20 mm (ER32) • 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) • Motor power: 3 kW (4 HP) • Max. front milling tool diameter: 20 mm • Max. front milling tool length: 110 mm • Max. rear milling tool diameter: 12 mm • Max. rear milling tool length: 80 mm • Max. saw blade diameter: 100 mm • Saw blade bore (ER32): 50 mm • Saw blade arbor diameter (ER20): 12 mm Worktable: The worktable is designed to guarantee the operator maximum freedom of movement. The quick-release vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of workpieces. • 4 supports, 900 mm, steplessly adjustable manually along X • 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) • 2 stops in X (1 left / 1 right) • 1 stop in Y per support (total 6) • Retractable reference stops are CNC controlled • Supplied: 4 plug-in adapters for suction cups • Pendulum processing as standard (2 working zones) Axis motion: The drive system in X, Y and Z directions uses ground recirculating ball screws of the highest precision class. The ball screw for the X-axis is positioned precisely at the center line...