Stumdomas stalo pjūklas

SCM SI 400 EP Nova

Sąlyga: naujas, Standard Equipment and Accessories - 10-year warranty on the saw carriage guide system - Saw carriage with anodised aluminium profile, guideways made from hardened, ground, and roll-formed steel rails - Saw carriage length: 3200 mm - "READY" electronic control, 2-axis control (3rd axis optional) with: - Height adjustment and tilt of the saw unit (parallel fence control optional) - Tool data management with automatic cutting height correction according to the saw blade tilt angle - Manual, semi-automatic, and automatic modes with up to 99 programmable work routines - Additional functions: calculator and operating hours counter - Squaring frame for quick positioning of the fence during mitre cuts - Outfeed table extensions - Cutting width at parallel fence: 1270 mm - 2-axis control with 99 programs Motor 7kW 50Hz (8kW 60Hz) - Motor with direct start via push buttons - Three main saw blade speeds - Scoring unit with independent motorisation, externally adjustable, stops for easy blade positioning Safety/Protection - Emergency stop button at the front - Emergency stop button located at the parallel fence (CE version) - Thermal overload protection Tjdpfevxr Skjx Ag Rjf - Saw blade pendulum guard (CE version) with integrated extraction, extraction nozzle diameter 80 mm - Saw blade pendulum guard with integrated extraction, extraction nozzle 80 mm diameter - Automatic main saw blade motor brake (CE version) - Lockable main switch - 110 V auxiliary circuit - EC Declaration of Conformity (CE version) Technical Specifications - Max. cutting height at 90° (mm): 140 with 400 mm blade - Max. cutting height at 45° (mm): 97 with 400 mm blade - Saw blade tilt (degrees): 45 - Saw blade assembly lift/tilt: programmed - Saw blade speed (RPM): 3000 / 4000 / 5000 - Scoring blade speed (RPM): 8500 - Main motor power (S6 -40%) kW (HP) 50 Hz: 7 (9.5) - Scoring unit power (S6 -40%) kW (HP) 50 Hz: 1.3 (1.7) Format cutting: - with carriage 1600 (mm): n/a - with carriage 3200 (mm): 3200 x 3200 mm Rip fence cutting width (mm): 1270 Extraction port diameters: - On base frame (mm): 120 - On blade guard (mm): 80 - On riving knife (mm): n/a Net weight of base machine (kg): 1050 109999 Version in accordance with safety regulations R10078 nova si 400ep CE version 930731 Voltage 400 EU 931201 Frequency 50 Hz 570343 Digital readout for parallel fence Complete with: - Digital display and magnetic tape 570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star-delta switch kW 9 HP12 50Hz (kW11 HP15 60Hz) 083202 Machine base 109993 MACHINE LANGUAGE: German

Sąlyga: naudotas, mašinos/transporto priemonės numeris: G-ADHM115775cP, Planer-thicknesser Holzprofi STÖ410, 410 mm planing width, 4-knife cutterblock Tsdpfx Aovw Ebiog Rof Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Sąlyga: geras (naudotas), Gamybos metai: 1991, pjovimo plotis (maks.): 1 050 mm, pjovimo aukštis (maks.): 135 mm, pjūklo disko skersmuo: 400 mm, aukščio reguliavimo tipas: mechaninis, bendras svoris: 930 kg, galia: 5,5 kW (7,48 AG), Įranga: dozatorius, MAKA SC 3200 Sliding Table Panel Saw with Scoring Unit Manufacturer: MAKA/Griggio Technical Data: Sliding table length: 3200 mm Tsdpfjp H Tgbox Ag Rof Cutting length: 3300 mm Cutting width right of saw blade: 1050 mm Max. saw blade diameter: 400 mm Max. cutting height: 135 mm Saw blade tiltable: 0-45° Cutting height at 45°: 90 mm (with 400 mm saw blade) Main motor: 5.5 kW / 400 Volt 3 speeds: 3,000 / 4,000 / 6,000 rpm Scoring unit motor: 0.75 kW Scoring blade diameter: 125 mm Extraction port: 120 mm Wide and narrow safety hood Dimensions: 3250 x 3100 x 830 mm Weight: 922 kg

Sąlyga: naujas, Holzkraft minimax me 35 t s Edge Banding Machine 5507235 For plastic edging from 0.4 – 3 mm, solid wood edging up to 5 mm and workpieces from 8 – 50 mm Top-tier equipment for high productivity with a compact footprint! Intuitive operation via eye-S control system and 10" large touchscreen: HMI Maestro Active Edge; graphical representation of all processing units and their operating status; graphical simulation of processing operations; control of all processing units; regulation of glue pot temperature; assistant functions for machine setup according to processing program; error diagnostics for quick resolution of simple faults; statistics on processing parameters; USB port; network connectivity prepared Excellent accessibility to the working units thanks to the large hood, ensuring protection and noise reduction Monoblock steel frame for high machine stability and rigidity Automatic unit positioning when changing panel thickness Automatic strip edge feeding with edge magazine (me 35 t s): solid wood strip edges are automatically loaded and synchronized with panel guidance Panel feed by feed chain with rubber glide shoes Extendable workpiece support Quality Made in Italy TECHNICAL DATA Dimensions and Weights Length (product) approx. 3314mm Width/depth (product) approx. 1085mm Height (product) approx. 1300mm Net weight approx. 545kg Tedpfx Aekknbqeg Rjf Flush Milling Radius Unit Flush milling radius unit motor power 2 x 0.35kW Flush milling radius cutter diameter HM 55.3mm Flush milling radius unit speed 12000rpm Flush milling radius extraction port diameter 2 x 60mm Electrical Data Connection voltage 400V Mains frequency 50Hz Glue Station Glue pot motor power 0.25kW Glue pot working temperature 190°C Glue pot extraction port diameter 60mm Glue pot capacity 0.8kg Pneumatic Connection Operating pressure 6.5bar Feed Feed motor power 0.55kW Feed speed 7m/min Edging Edge thickness roll material 0.4 – 3.0mm Edge thickness strip material 0.5 – 5mm Pre-Milling Unit Pre-milling unit extraction port Ø 2 x 80mm Pre-milling unit motor power 3kW Pre-milling unit speed 7200rpm Pre-milling unit diamond cutter Ø 80mm Pre-milling unit cutter height 56mm Pre-milling unit material removal 0.5 / 1 / 1.5 / 2mm Scraper Units Radius scraper 2mm Buffing Unit Buffing unit motor power 2 x 0.14kW Buffing unit speed 2800rpm Workpiece Workpiece thickness 8 – 50mm Workpiece length min. 120mm Workpiece width min. 110mm Holzkraft Authorized Dealer – Accessories available upon request!

Sąlyga: naujas, Gamybos metai: 2024, IN STOCK!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min. Weight: approx. 900 kg Max. total connected load: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min. Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Tsdpfx Agohymgde Rsf Combi milling unit Radius milling R=2 mm Corner radius milling R=2 mm Radius scraper R=2 mm

Sąlyga: naujas, CATALOG NUMBER HZ0001 PRODUCT FEATURES Standard equipment includes mobile sawdust containers fitted with a pressing system that ensures a tight connection between the container and the machine structure. This allows for high levels of negative pressure without losses at connection points. Contaminants from the filter fall directly into hermetically sealed containers, which enable quick unloading. These containers feature a special suspension system and mobile castors for easy and fast transport and maneuvering. The 5.5 kW / 6,500 m³/h negative pressure fan, operating at 2,800 Pa, works on a turbine principle. The sound-insulated fan design significantly reduces noise emission during operation. The certified control cabinet allows continuous monitoring of correct operation, with the flexibility to position it remotely from the machine. Standard version includes an integrated fan operation control system and a filtering fabric cleaning system. ADVANTAGES - New machine - CE certificate Tedpfsdf S Szsx Ag Rsf - High efficiency - Professional quality Scope of delivery: Polyester filter, 5 microns 2 containers Mobile undercarriage Filter cleaning system with vibration control TECHNICAL DATA - Extraction performance: approx. 6,500 m³/h - Motor power: 5.5 kW - Rotational speed: 3,000 rpm - Voltage: 400V, 50Hz - Extraction nozzle: 280 mm - Filter surface area: 16.3 m² - Extraction speed: 28 m/sec - Number of filters: 35 - Negative pressure: 2,800 Pa - Filter category: G - Filter material: polyester - Dimensions (L/W/H): 921x1982x2271 mm - Weight: 350 kg Net price: 16,000 PLN Net price: 3,810 EUR Net price calculated at exchange rate 4.2 PLN/EUR (for major exchange rate fluctuations, price may be subject to change)

Sąlyga: naudotas, Gamybos metai: 2018, Edgebanding machine AKV 3006 DK - F with jointing unit including DIA tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combination milling station Radius R 2.5 mm Technical Description: - Application of hot-melt adhesive to workpieces for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot Tedpfjxfh Tmox Ag Ref - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with disposable insert cutters (combination type) and fine adjustment of cutter from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Adjustable cutting depth for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate inspection windows from the rear and operator sides of the machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm - Weight: approx. 1550 kg depending on configuration - Dimensions (L x W x H): 5250 x 1445 x 1600 mm - 2-point pneumatic cutter adjustment, 1 unit - Switching between radius / flush / chamfer on the combination milling stations - Switching between chamfer or flush is done manually by shifting the stop flap inside the machine - Buffing station (swab) 1 unit - Corner rounding cutter 1 unit including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm - Radius scraper 1 unit including pneumatic lifting device, radius R 2.0 mm - Surface scraper 1 unit with pneumatic engagement control - Glue pot quick-change system including second glue pot with downward glue outflow, 1 unit for quick color changes - Horizontal grooving saw unit into the edge, 1 unit including pneumatic lifting device and groove tool - Separate extraction for jointing unit, 1 unit directly at the jointing unit, vertically upward d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onward - Ball bearing for corner rounding cutter 24.1 mm, 1 unit - Ball bearing for corner rounding cutter 24.2 mm, 1 unit - Interchangeable motor 0.37 kW for corner rounding cutter, 1 unit with quick-change device including radius cutter R 1 - Interchangeable spindles, 1 set = 2 pieces, 1 unit - Set of quick-change motors for longitudinal processing above and below, including tool R 1 - Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + Tsdpfxsvnv Uzj Ag Ref (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: naujas, Gamybos metai: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and joiners The especially long one-piece planer tables ensure easy planing of workpieces Work tables are made of cast iron, making them resistant and permanently flat Rearward, simultaneously opening planing tables with spring support for fast and convenient conversion Thanks to the fixed-mounted extraction hood, no need to reconnect the extraction hose when converting, saving valuable working time Helically grooved steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknessing exit ensures smooth wood extraction Material feed with four selectable speeds Thicknessing table adjustment via handwheel with integrated thickness height display DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator’s position Powerful industrial motor High machine weight guarantees top precision and smooth operation Prepared for slot mortising unit Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer (Jointer) Total table length: 2250 mm Max. planing depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust extraction connection Thicknesser extraction port diameter: 1 x 120 mm Drive power Main motor: 7 kW Installation information Required space length: 2250 mm Required space width/depth: 1440 mm Explanation required space: The dimensions take into account maximum traverses or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. planing depth: 5 mm Electrical data Connection voltage: 400 V Tjdpfx Aeff Hdpjg Rsf Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2018, Spindle tiltable: Yes, -45 to 45° Height adjustment: Handwheel Tsdsgyzzmjpfx Ag Rsf Tilt adjustment: Handwheel Fence adjustment: Manual Height display: Mechanical counter Tilt angle display: Mechanical counter Milling fence display: Mechanical counter Spindle diameter: 30 mm Speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Power input: 7 kW Motor brake: Yes, automatic Extraction connection: 1 x 120 mm, 2 x 80 mm Machine length: 2,500 mm Machine width: 1,250 mm Weight: 510 kg