Schaublin 102 pirkti naudotą (54)

Sąlyga: naudotas, Rankinė svirties tekinimo staklės SCHAUBLIN, modelis 102 Mechaniko tekinimo staklės Staklių Nr. 208322 Gamybos metai apie 1970 Viso ilgio lova 650 mm Aukštis virš lovos 102 mm Aukštis virš skersinio stalo 53 mm Vidutinė pagrindinio veleno apsisukimų dažnis apie 2.800 aps./min (3 greičių pakopos) Variklis 0,37 kW, 2800 aps./min Maitinimo įtampa 380 V, 50 Hz Ijdpfjw Iq Umox Abksik - Rankinė svirties įpjovimo ir atpjovimo stovas su tiksliai reguliuojamais ribotuvais - Įrankio laikiklis su precizišku aukščio nustatymu - Spaustuvo įranga (yra tik viena spaustuvinė įvorė) - Sukimosi greičio keitimas perjungiant pavaros diržą Reikalinga vieta su stalu pagrindu I x P x A 1150 x 600 x 1200 mm Svoris su stalu pagrindu 130 kg Gera būklė

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Schaublin 102 VM Iedpfjxq D Nusx Abkeik Iš viso sandėlyje bus 8 vnt Kaina nurodyta už vienetą

Sąlyga: labai geros būklės (naudotas), The used SCHAUBLIN 102N bench lathe is a Swiss precision manual lathe of small size, with a center height of 102 mm, distance between centers of 400 mm, and spindle bore of 20 mm. Available: 2 similar machines (one with short bed and quick change tooling, the other with long bed and geared headstock); both are already complete with electrical cabinet and safety devices compliant with standards; tooling and conditions as per the photos. Iodpowqxcxefx Abkeik

Sąlyga: naudotas, Centre height 102 mm Centre distance 450 mm Iisdjwbi Hpepfx Abkek Spindle bore 25 mm Spindle speed: 220 - 2600 Accessories have not been checked for completeness Cabinets are not included in the scope of delivery.

Sąlyga: naudotas, Working Area Centre Height: 102 mm Centre Distance: - with standard headstock: 450 mm - with reduction gear headstock: 375 mm - over bed: 200 mm - over cross-slide: 120 mm Headstocks Spindle nose for collets type Schaublin W25 Spindle bore: 25 mm Collet through-hole: 20 mm Reduction gear ratio: 1:5 Bed Height x width x length: 168 x 130 x 1000 mm Bed made of cast iron, trapezoidal profile as on lathe 102 N, hardened and ground dovetail guideways. Slides Maximum travel on bed: 400 mm Tool slide width – length: 80 – 194 mm Manual adjustment travel: 90 mm Centre height over tool slide: 20 mm Tool holder shank: 12 x 12 mm Cross-slide width – length: 94 – 300 mm Manual adjustment travel: 100 mm Saddle guide length on the bed: 250 mm Leadscrew Leadscrew for longitudinal turning and thread cutting, Ø 40 mm Leadscrew hardened, thread ground, pitch 4 mm Speed Range Spindle speed: 270 – 3000 rpm Longitudinal feed: 0.02 – 0.3 mm/rev Thread Cutting Maximum pitch with standard change gear set: 4 mm Machine plate for 20 metric pitches: 0.25 – 4 mm Machine plate for 25 imperial pitches: 80 – 6 TPI Tailstock Quill diameter: 30 mm Iiedebxkl Topfx Abkjk Quill taper: 2 Morse Quill travel: 80 mm Coolant Equipment Coolant tank capacity: 23 litres Net Weights Lathe on workbench, approx. 225 kg Lathe on cabinet base, approx. 550 kg

Sąlyga: geras (naudotas), Centre height: 102 mm Centre distance: 450 mm Lead / feed screw W20 collets available Speed: approx. 210 – 3000 rpm Reduction gearbox Left and right rotation 2-speed drive Dimensions (L x W x H): approx. 1760 x 595 x 1230 mm Iodjcug H Sjpfx Abkjik Weight: approx. 650 kg Various "Schaublin 102" models available in stock!

Sąlyga: naudotas, TECHNINIAI DUOMENYS - Viršūnės aukštis: 102 [mm] - Didž. skersmuo virš lovos: 200 [mm] - Atstumas tarp viršūnių: 470 [mm] - Ašies laikiklio tipas: W20 - Skylė: 20 [mm] Ijdpfjw Ihttox Abkjik - Perėjimas nuo strypo prie įvorės: 14,5 [mm] SVORIS IR IŠMATAVIMAI - Užimamas plotas: 1500 x 800 [mm] - Staklių aukštis: 1300 [mm] - Staklių svoris: 500 [kg]

Sąlyga: geras (naudotas), Centre height: 102 mm Iijdpfx Abjcpznhjksk Distance between centres: 450 mm Spindle bore: 32 mm Reduction gearbox Left/right rotation 2-speed drive Variable speed: 270–3000 rpm Knee lever operation Swing over bed: 200 mm Spindle nose: W 20 Tailstock quill: MK 2 Dimensions (LxWxH): approx. 140x56x123 cm Weight: approx. 550 kg Accessories available Manual available Various 'Schaublin 102' models in stock!

Sąlyga: geras (naudotas), Right- & left-hand rotation with knee reversing switch 2-speed variable drive Headstock with reduction gearbox Cross slide with 90 mm travel Tripan tool holder 1 set of W20 collets 2 drawers Lamp 380 VAC Centre distance: 350 mm Centre height: 102 mm Swing diameter over bed: 200 mm Swing diameter over cross slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MT 2 Weight: approx. 500 kg Machine dimensions (W x D x H): approx. 1300 x 600 x 1300 mm Iiedpfxsd Htvdj Abksk Various versions of "Schaublin 102" available from stock!

Sąlyga: geras (naudotas), Center height: 130 mm Center distance: 450 mm Speed: approx. 55–3000 rpm Pneumatic clamping system Spindle nose: W 25 Various W25 collets available Various holders available BERGER LAHR axis motors Combitec EIP E-500 control unit Manual for control included Ijdpfx Abecuhvujkoik Coolant system included Machine lamp included Machine feet included Dimensions (LxWxH): approx. 1400x560x1230 mm Weight: approx. 550 kg Various versions of "Schaublin 102" in stock!

Sąlyga: naudotas, Schaublin 102-N80 Šveicariškas precizinis tekinimo staklės Techninės specifikacijos: Centro aukštis: 102 mm Atstumas tarp centrų: 450 mm Veleno kiaurymė: 32 mm reduktorius kairės / dešinės eigos 2 pakopų pavara Vario greitis: 270-3000 aps./min knee circuit Tekėjimo skersmuo virš staklių: 200 mm Iiedoxxavgopfx Abksk Veleno antgalis: W20 Galinė atrama: MK 2 Matmenys (IxPxA): apie 140x56x123 cm Svoris: apie 550 kg Priedai / pasirinkimai: - 3 žandikaulių griebtuvas su žandikauliais - 4 žandikaulių griebtuvas su žandikauliais - Įrankių laikikliai - Schaublin įvorės nuo 0,5 mm Po įtampa mūsų sandėlyje.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 312560, Completely overhauled – newly painted, New worktable Country of origin: Switzerland Voltage: 380V, 50Hz, 3Ph Customs tariff number: 8458.1930 TECHNICAL DATA - Centre height: 102 mm - Distance between centres, headstock type W, standard: 470 mm - Distance between centres, headstock W with reduction gear: 375 mm - Swing over bed: 200 mm - Swing over cross slide: 120 mm Bed: - Height-width-length: 168-100-1000 mm Bed made of cast iron with ground trapezoidal profile Headstocks: - Spindle nose for collets: W-25 - Collet through hole: 19.0 mm - Reduction ratio of gear transmission: 1:5 Cross slide: - Cross slide travel, longitudinal: 90 mm - Cross slide travel, cross: 100 mm - Tool shank cross-section: 12x12 mm Tailstocks: - Quill taper: Morse 2 - Quill travel (tailstock with leadscrew and handwheel): 80 mm Errors and omissions excepted. The technical data is provided without obligation. Inventory No. 2210049, machine consisting of: 1 Bed 105-11 1 Headstock 105-26 1 Cross slide 102-45 1 Tailstock 105-65 1 Voegtle motor 380V/50Hz/3Ph.; 750-3000 rpm; 0.4/0.9 kW 1 set of 40 collets W20, Ø 0.5 to 20 in 0.5 mm increments 1 Tripan 111S toolholder 2 Tripan 131 tool holders 1 Tripan 132 tool holder 1 W20 hollow centre Iiedpfx Absdr R Tcjkjk

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Galima aptarti papildomą įrangą vietoje. Iijdpfx Abev Natwskjk

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, High-Precision Lead Screw Lathe Schaublin 102N-VM Technical Data: >> Machine No.: 283152 >> Centre Height: 102 mm >> Distance Between Centres: 450 mm >> Spindle Bore: 25 mm >> Longitudinal Feeds: 8 settings from 0.02–0.3 mm/rev >> Metric Threads: 20 pitches from 0.25 to 4 mm >> Imperial Threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse Taper 2 (MT2) >> Infinitely Variable Speed Range: 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck with 2 sets of jaws >> Tool holder with 6 tool pockets >> Quick collet closer, draw tube, and 34 collets >> Coolant system >> Cutting tools, drill chuck (see photos) Iiodjwvq Tmspfx Abkok >> Operating manual with spare parts list About the Machine: For sale is a Schaublin 102VM lead screw lathe in very good condition. The machine is, of course, fully functional. All slides run smoothly and evenly. Even at high speeds, the 102VM runs quietly. The gear set for thread cutting is included, although it may not be complete. Take advantage of the opportunity to inspect this machine under power on site and see its excellent condition for yourself.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Schaublin 102N-VM-CF hochpräzisions-Drehmaschine aus Schweizer Fertigung Baujahr: 2005 Max. zulässiger Umlaufdurchmesser über Bett: 200 mm Max. zulässiger Umlaufdurchmesser über Support: 120 mm Spitzenhöhe: 102 mm Spitzenweite: 450 mm Bettlänge: 1000 mm Betthöhe: 168 mm Motorleistung: 4,2 kW Spindeldrehzahl: 100 - 3000 U/min Spindelaufnahme: W25 Querweg X-Achse: 100 mm Auflösung X-Achse (Radius): 0,01 mm Längsweg Z-Achse: 90 mm Auflösung Z-Achse (Radius): 0,01 mm Leitspindel: - 8 Längsvorschübe - Größere Vorschübe möglich bei Nutzung der Gewindesteuerung zum Drehen Maximaler Werkzeugquerschnitt (Multifix-System): 10x10 mm Stangenspanner (Multifix-System), Durchmesser: 20 mm Höhen- und seiteneinstellbarer Reitstock: Innenkonus Hülse: MK2 Reitstockdorn-Ø: 30 mm Reitstockweg: 80 mm Kühlmitteltank: 23 Liter Elektr. Anschlusswert: 400 V Iiodpfow N Rh Ajx Abkek Abmessungen (L x B x H): 1500 x 510 x 1550 mm Zubehör / Optionen: - ACU-RITE Digitalanzeige, 3-Achsen (X-Z-Z1): X-Auflösung 0,001 mm Z-Auflösung 0,005 mm Z1-Auflösung 0,005 mm - Kühlmittelanlage - Rückseitige Blechverkleidung - Doppeltes Start/Stopp-Pedal mit Spindelumkehr - Schaublin W25 Spannzangensatz - Gussfutter W25 Ø110 mm mit Backen - Multifix-A Schnellwechselrevolver mit Haltern - Antriebssystem für Zusatzaggregate mit Riemen, verstell- und schwenkbare Riemenspannvorrichtung, kompletter Antrieb mit Motor, Riemen Ø6x2.500 mm - Reitstock - usw. Unter Strom in unserem Lager verfügbar.

Sąlyga: naudotas, Techniniai duomenys: X eiga: 700 mm Sūkiai: iki 1500 aps./min Pavaros greitis: 12 - 1000 mm/min Stalo matmenys: 1100 x 250 mm Iodpfx Aoxtnn Tsbkeik Galva pasukama: taip Matmenys, apytiksliai: 1750 x 1600 x 1850 mm Svoris, apytiksliai: 1900 kg

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Schaublin 135 High-Precision Lathe with NEW K&C 3-axis Digital Readout and Accessory Cabinet from University – Excellent Condition! Technical Data: >> Centre Height: 135 mm >> Centre Distance: 630 mm Iijdpfx Asx H Szyebkjk >> Swing over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025 – 0.35 mm/rev >> Metric Threads: 0.25 – 14 mm >> Tailstock Taper: MK3 >> Infinitely variable spindle speeds: 55 – 3000 rpm >> Total connected load: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> NEW K&C 3-axis digital readout, 12 months manufacturer’s warranty, including operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, count direction switching Accessory cabinet contains: >> 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B, 3 pockets >> Internal and external collet rapid clamping systems >> Change gears >> 4-jaw chuck >> Faceplate >> Fixed and travelling steady rests >> Coolant system >> Centre points >> Operating manual >> and much more About the machine: Offered is a Schaublin 135 High-Precision Lathe. The machine is in very good condition, coming from a university with low operating hours. Equipped with a NEW K&C 3-axis digital readout and extensive accessories. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Gamybos metai: 1998, veikimo valandos: 1 339 h, Sąlyga: paruoštas naudoti (naudotas), Valdymo blokas Prekės ženklas: FANUC Modelis: Series 18i-T Pagrindinis pavara Ašių skaičius: 4 Veleno greitis: 4000 aps./min. Įrankio tvirtinimas: VDI 30 Isdpfx Abjx D Itwjkoik Ši 4 ašių SCHAUBLIN 65 TM-3 pagaminta 1998 metais. Tai tvirta horizontalioji tekinimo staklė, kurios didžiausias tekinimo skersmuo – 380 mm, ilgis – 534 mm. Veleno ir sukamo įrankio greitis siekia iki 4 000 aps./min, 12 pozicijų bokštelis su varomais įrankiais, tad turite puikią galimybę įsigyti SCHAUBLIN 65 TM-3 horizontalų tekinimo staklę. Daugiau informacijos – susisiekite su mumis. Pritaikymo sritys Tekinimas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Fanuc Series 20-T control Turning diameter: 330 mm Bar diameter: 42 mm Turning length: 650 mm Spindle speed: 5,000 rpm Iijdpjwh U Dtefx Abksk 8-position turret Minimum quantity lubrication

Sąlyga: naudotas, bendras aukštis: 1 700 mm, bendras plotis: 1 600 mm, bendras ilgis: 1 800 mm, Savaiminis svoris: 1.650 kg - Dokumentacija prieinama: Taip - CE sertifikatas: Ne - Valdymas: Konvencinis - Galia [kW]: 4,0 - Ašių skaičius [vnt.]: 3 - X ašies eiga [mm]: 700 - Y ašies eiga [mm]: 550 - Z ašies eiga [mm]: 430 - Stalo ilgis [mm]: 1100 - Stalo plotis [mm]: 255 - Įrankio tvirtinimas: ISO30 - Min. veleno sūkių skaičius [aps./min.]: 38 - Maks. veleno sūkių skaičius [aps./min.]: 1500 - Papildomos parinktys: Skaitmeninis indikatorius - Skaitmeninio indikatoriaus tipas: Sony - Transportavimo matmenys: 1800mm x 1600mm x 1700mm (i x p x a) - Transportavimo svoris [kg]: 1650kg Iiodpfx Aswni Akebkok - Transporto pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas į keitimą galimi bet kuriuo metu viskam iš pramonės sektoriaus Lukas van Rossum

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, mašinos/transporto priemonės numeris: 350735, Country of Manufacture: Switzerland Voltage: 400V Net weight: 1570 kg Iedpfx Ajhr Rtnobkeik Customs tariff number: 8458.1120 External dimensions: 1830x1260x1700 mm TECHNICAL DATA Capacities Maximum turning diameter: Ø 270 mm Maximum permissible diameter over the cross slide: Ø 115 mm Center height over the cross slide: 60 mm Turning length B32: 265 mm Headstock: A2-4 Spindle for Schaublin collets: W20 / W25 / F38 / B32 Spindle speed, stepless: 50 - 5,000 rpm Spindle inner diameter (without collet key): 39 mm Maximum bar passage through W20 collet: 14.5 mm Maximum bar passage through automatic chuck: 32 mm Maximum recommended turning diameter: 200 mm Pneumatic Clamping Adjustable axial clamping force, force at 5 bar: 1,150 daN Cross Slide Cross travel, X-axis: 180 mm Resolution, X-axis (on the radius): 0.0005 mm Drive by AC motor, continuous / intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm Drive by AC motor, continuous / intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm Feeds Working feed, X and Z axes, stepless: 0 - 5 m/min Rapid feed, X and Z axes: 8 m/min Feed forces, X / Z axes, stepless: 503 / 503 daN Tool System: Turret Standardized toolholder mounting: VDI 20 Number of tool stations: 8 Number of stations for driven tools: 4 Drive by AC motor, continuous / intermittent: 0.55 / 1.1 kW Spindle speed, stepless: 30 - 5,000 rpm Maximum tool cross section: 16 x 16 mm Integrated coolant supply and indexing in both directions of rotation: yes Coolant Tank capacity: 55 L Pump delivery rate: 10 L/min Pressure: 1.7 bar Pneumatic Tailstock Sleeve taper: Morse 3 Outer diameter of sleeve: 45 mm Sleeve travel: 70 mm Adjustable support force: 25 - 260 daN Center height from floor: 1,162 mm Technical data is subject to change and provided without obligation; errors excepted.

Sąlyga: geras (naudotas), Travel paths 300 x 150 x 355 mm Table size 700 x 250 mm Spindle mount ISO 30 Spindle speeds 58-2000 rpm Iijdeu Eqixopfx Abkek With digital readout Various accessories MARCELS MASCHINEN CH

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Schaublin 135 High-Precision Lathe with 3-Axis Digital Readout ELESTA and Accessory Cabinet from University – Excellent Condition! Technical Data: Iijdsx Hivnepfx Abkjk >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feed: 0.025–0.35 mm/rev >> Metric threads: 0.25 – 14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout ELESTA (Heidenhain scales) >> Accessory cabinet containing: >> 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B quick-change toolpost, 3 holders >> Internal and external collets with quick-change mechanism >> Change gears >> Eccentric chuck >> Faceplates >> Fixed and travelling steadies >> Coolant unit >> Centre points >> Operating manual >> And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university with very little use. Fitted with a 3-axis digital readout and a wide range of accessories. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 341966, Country of manufacture: Switzerland Voltage: 400/50/3 Iisdpfx Aow T Smhsbkek Net weight: 2640 kg Customs tariff position: 8458.1120 Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Max. turning diameter: 330 mm Max. diameter over cross slide: 160 mm Center height over cross slide: 83 mm Max. diameter over bed: 430 mm Turning length (depending on equipment): 650 mm Headstock: Standardized spindle nose, allowing use of various collets and chucks via adaptation accessories. Accessories for SCHAUBLIN collets: B45/F48 Max. bar capacity dia.: 36 mm/42 mm Automatic chuck, standard dia.: 170 mm Direct drive with AC motor, power at 100%/50% ED: 15/18.5 kW Max. torque at 100%/50% ED: 135/165 Nm Max. spindle speed: 5000 rpm C-Axis: Pneumatic clamping cylinder: 2700 daN Cross Slide: Transverse travel, X-axis: 240 mm Radial resolution: 0.0005 mm Driven by AC motor, nominal torque: 3 Nm Ball screw, X dia. x pitch: 32 x 5 mm Longitudinal travel, Z-axis: 720 mm Resolution: 0.001 mm Driven by AC motor, nominal torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Feeds: Working feed, X/Z axes, stepless: 0-5000 mm/min Rapid traverses, X/Z axes: 8/10 m/min Feed force, X/Z axes: 420/670 daN Turret tooling system: Number of tool stations: 8 Standardized tool holder interface: VDI 30 Max. tool shank section: 20 x 20 mm Integrated coolant supply Bidirectional indexing Coolant system: Tank capacity: 120 liters Pump flow rate: 10 l/min Pressure: 5 bar Except for errors or omissions, the technical specifications are provided without commitment.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155x110x160 cm Installed power: 2.10 kW Customs tariff code: 8459.6930 TECHNICAL SPECIFICATIONS Vertical Rectangular Table: - Usable area: 740x200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between slots: 120 mm Fixed Angle Table: - Usable area: 700x250 mm Isdjw Uc Npopfx Abkeik - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between slots: 40 mm - Lateral travel: 250 mm (total) Universal Tilting Table: - Usable area: 600x210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between slots: 40 mm - Lateral travel: 350 mm (total) Tilting range in three planes, each direction: 30°- 45°- 30° Spindle Internal Taper: - Horizontal spindle head: ISO 30 (40) - Vertical spindle head: ISO 30 (40) - Universal quick head: SV E20+ES20 Swivel in vertical plane: Vertical spindle head: 360° Longitudinal travel: hand/automatic: 320/300 mm Vertical travel: hand/automatic: 375/355 mm Cross travel: adjustment handwheel: 150 mm Quill travel: 60 mm Reading accuracy at micrometric verniers: 0.02 mm Main motor, kW-rpm: 1.5/1500 Rapid feed drive motor, kW-rpm: 0.45/3000 Coolant device motor, kW-rpm: 0.15/3000 Spindle speed: - 1st range, rpm: 58-375 - 2nd range, rpm: 330-2000 Feed rates - longitudinal or vertical, mm/min: 12-400 - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (quick feed) - Longitudinal or vertical, mm/min: 1200 All technical data provided without obligation or guarantee, except for errors or omissions.