Tiksliosios tekinimo staklės

Schaublin 102N-VM

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Schaublin 102 N - VM, Mašinos numeris: BL 330699, Blsdpfx Aoynimhjahod Mašina su kreipiančiąja sraigtu, Centras aukštis: 102 mm, Kreipiantysis sraigtas: 40 mm skersmuo, grūdintas ir sriegis šlifuotas. Kreipiančiojo sraigto žingsnis: 4 mm. Padavimai: 8 išilginiai padavimai nuo 0,02 iki 0,3 mm/aps. Sriegimo diapazonas: Metriniai: 20 žingsnių nuo 0,25 iki 4 mm. Coliniai: 25 žingsnių nuo 80 iki 6 tpi. Atstumas tarp centrų: 450 mm, Maks. tekinimo Ø virš staklių lovos: 200 mm, Maks. tekinimo Ø virš skersinio vežimo: 120 mm, Veleno greitis iki 2 800 aps./min., Galinis centras, Priedai,

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK 5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel: 360° Bedpfev I Eq Sjx Aahjld Grinding headstock swivel: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (overhung): 130 kg incl. clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Floor space approx.: 4.2 x 2.0 m Available immediately, naturally with 12 months warranty! Geometrically overhauled and newly painted with new electrics, in KELLENBERGER quality! - Digital readout on 2 axes. X-axis resolution: 0.5 µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Further accessories available on request. At this time, the machine tool does not comply with the fundamental health and safety requirements as stipulated in BetrSichV 2015. An increase to the required minimum safety target must be determined by means of a risk assessment in accordance with BetrSichV.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Schaublin 102N-VM-CF hochpräzisions-Drehmaschine aus Schweizer Fertigung Baujahr: 2005 Bedpfew N Rh Aex Aahold Max. zulässiger Umlaufdurchmesser über Bett: 200 mm Max. zulässiger Umlaufdurchmesser über Support: 120 mm Spitzenhöhe: 102 mm Spitzenweite: 450 mm Bettlänge: 1000 mm Betthöhe: 168 mm Motorleistung: 4,2 kW Spindeldrehzahl: 100 - 3000 U/min Spindelaufnahme: W25 Querweg X-Achse: 100 mm Auflösung X-Achse (Radius): 0,01 mm Längsweg Z-Achse: 90 mm Auflösung Z-Achse (Radius): 0,01 mm Leitspindel: - 8 Längsvorschübe - Größere Vorschübe möglich bei Nutzung der Gewindesteuerung zum Drehen Maximaler Werkzeugquerschnitt (Multifix-System): 10x10 mm Stangenspanner (Multifix-System), Durchmesser: 20 mm Höhen- und seiteneinstellbarer Reitstock: Innenkonus Hülse: MK2 Reitstockdorn-Ø: 30 mm Reitstockweg: 80 mm Kühlmitteltank: 23 Liter Elektr. Anschlusswert: 400 V Abmessungen (L x B x H): 1500 x 510 x 1550 mm Zubehör / Optionen: - ACU-RITE Digitalanzeige, 3-Achsen (X-Z-Z1): X-Auflösung 0,001 mm Z-Auflösung 0,005 mm Z1-Auflösung 0,005 mm - Kühlmittelanlage - Rückseitige Blechverkleidung - Doppeltes Start/Stopp-Pedal mit Spindelumkehr - Schaublin W25 Spannzangensatz - Gussfutter W25 Ø110 mm mit Backen - Multifix-A Schnellwechselrevolver mit Haltern - Antriebssystem für Zusatzaggregate mit Riemen, verstell- und schwenkbare Riemenspannvorrichtung, kompletter Antrieb mit Motor, Riemen Ø6x2.500 mm - Reitstock - usw. Unter Strom in unserem Lager verfügbar.

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: nepatikrintas, Atstumas tarp centrų: 650 mm Vidinis / išorinis diametras 2 ašių SONY skaitmeninis atvaizdavimas Bledpfxewu Tdfo Aahsd Aušinimo skysčio bakas

Sąlyga: naudotas, Gamybos metai: 2000, Grinding length: 800 mm Centre height: 150 mm CNC control: FANUC Grinding wheel dimensions max.: 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45/-15° degrees Workpiece spindle speed: 22-313 / 51-750 rpm Workpiece headstock swivel: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed rate: 0 to 7.5 m/min Machine weight: approx. 4.0 t Required space (LxWxH): approx. 3.7 x 2.2 x 1.9 m Includes: - Coolant system - Enclosed steady rest - Diamond dresser - Open steady rest - 3 grinding wheels - 3 flanges - Internal grinding spindle attachments Bledpfxju Hag Ns Aahsd

Sąlyga: beveik kaip naujas (naudotas), Profile grinding machine Utma model P20 Blsdpfoff H E Rox Aahjd

Sąlyga: naudotas, Apvalaus šlifavimo staklės STUDER S20-2 Blodsxrg Hxjpfx Aahod

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workpiece headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, overhauled. Hydraulics Disassembled, motor check, replacement of hoses, defective and worn parts. Hydraulic block inspected. X Axis Disassembly, replacement of worn parts such as O-rings, seals, rings, etc., overhaul of hydraulic piston, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical cabinet Complete inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer’s protocol. Inspection and cleaning of various accessories. Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff number 8460.2920 Bljdew U Ry Nopfx Aahsd TECHNICAL SPECIFICATIONS Nominal centre distance 600 mm Max. centre distance (extended headstock) 750 mm Centre height, standard 125 mm Centre height with interchangeable shoes for headstocks 175 to 250 mm Max. workpiece diameter (125 mm centre height) 250 mm Max. workpiece diameter with interchangeable shoes 350 to 500 mm Table swivelling in either direction 10° Max. length for surface grinding (max. width = 200 mm) 900 mm Table speed with continuously variable hydraulic control up to approx. 6 m/min Table reversal dwell time 0-5 sec. Wheel for external grinding, diameter-width-bore 400x50x127 mm Wheel for surface grinding 250x13x76 mm Grinding spindle speeds 1500/1700/2200/3600 rpm Grinding headstock swivel 270° With index every 90° Vertical movement of grinding headstock, centre height 125-350 mm Cross travel of grinding headstock 285 mm Hydraulic rapid advance/retract stroke 40 mm Intermittent feed of the wheel by table reversal 0.001-0.03 mm/dia Continuous plunge grinding feed 0-0.9 mm/dia Micrometric feed stop, graduated 0.001 mm/dia Workpiece headstock swivel 360° Continuously variable workpiece spindle speed, standard/special 20-400 / 10-400 rpm Workpiece headstock/tailstock internal taper 5/3 Morse Grinding headstock motor, approx. 4 HP All technical details are given without obligation and subject to errors or omissions.

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Bledpfjuxft Esx Aahod Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Sąlyga: geras (naudotas), becentrinio šlifavimo staklės Bedjtrguvopfx Aahjld