LATHE

SCHAUBLIN 102 N

Sąlyga: labai geros būklės (naudotas), The used SCHAUBLIN 102N bench lathe is a Swiss precision manual lathe of small size, with a center height of 102 mm, distance between centers of 400 mm, and spindle bore of 20 mm. Hnodpfx Acswqxcxsueu Available: 2 similar machines (one with short bed and quick change tooling, the other with long bed and geared headstock); both are already complete with electrical cabinet and safety devices compliant with standards; tooling and conditions as per the photos.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Fine turning lathe, Manufacturer: SCHAUBLIN, Model: 102 N 80 Hnedpfx Acjw Dfbueueu Serial no.: BL 280280 Technical data: Center distance approx.: 400 mm Center height: 102 mm Spindle bore: 26 mm Speeds: see speed chart Width x depth approx.: 1.3 x 0.5 m Machine weight approx.: 0.4 t

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, High-Precision Lead Screw Lathe Schaublin 102N-VM Technical Data: >> Machine No.: 283152 >> Centre Height: 102 mm >> Distance Between Centres: 450 mm >> Spindle Bore: 25 mm >> Longitudinal Feeds: 8 settings from 0.02–0.3 mm/rev >> Metric Threads: 20 pitches from 0.25 to 4 mm >> Imperial Threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse Taper 2 (MT2) >> Infinitely Variable Speed Range: 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck with 2 sets of jaws >> Tool holder with 6 tool pockets >> Quick collet closer, draw tube, and 34 collets Hnjdpfxjwvq Tmj Acueu >> Coolant system >> Cutting tools, drill chuck (see photos) >> Operating manual with spare parts list About the Machine: For sale is a Schaublin 102VM lead screw lathe in very good condition. The machine is, of course, fully functional. All slides run smoothly and evenly. Even at high speeds, the 102VM runs quietly. The gear set for thread cutting is included, although it may not be complete. Take advantage of the opportunity to inspect this machine under power on site and see its excellent condition for yourself.

Sąlyga: naudotas, Centre height 102 mm Centre distance 450 mm Spindle bore 25 mm Spindle speed: 220 - 2600 Accessories have not been checked for completeness Hnodpfswbi Hpjx Acuou Cabinets are not included in the scope of delivery.

Sąlyga: geras (naudotas), Centre height: 102 mm Hsdpecpznhsfx Acuenu Distance between centres: 450 mm Spindle bore: 32 mm Reduction gearbox Left/right rotation 2-speed drive Variable speed: 270–3000 rpm Knee lever operation Swing over bed: 200 mm Spindle nose: W 20 Tailstock quill: MK 2 Dimensions (LxWxH): approx. 140x56x123 cm Weight: approx. 550 kg Accessories available Manual available Various 'Schaublin 102' models in stock!

Sąlyga: naudotas, Working Area Centre Height: 102 mm Centre Distance: - with standard headstock: 450 mm - with reduction gear headstock: 375 mm - over bed: 200 mm - over cross-slide: 120 mm Headstocks Spindle nose for collets type Schaublin W25 Spindle bore: 25 mm Collet through-hole: 20 mm Reduction gear ratio: 1:5 Bed Height x width x length: 168 x 130 x 1000 mm Bed made of cast iron, trapezoidal profile as on lathe 102 N, hardened and ground dovetail guideways. Slides Maximum travel on bed: 400 mm Tool slide width – length: 80 – 194 mm Manual adjustment travel: 90 mm Centre height over tool slide: 20 mm Tool holder shank: 12 x 12 mm Cross-slide width – length: 94 – 300 mm Manual adjustment travel: 100 mm Saddle guide length on the bed: 250 mm Leadscrew Leadscrew for longitudinal turning and thread cutting, Ø 40 mm Leadscrew hardened, thread ground, pitch 4 mm Speed Range Spindle speed: 270 – 3000 rpm Longitudinal feed: 0.02 – 0.3 mm/rev Thread Cutting Maximum pitch with standard change gear set: 4 mm Machine plate for 20 metric pitches: 0.25 – 4 mm Machine plate for 25 imperial pitches: 80 – 6 TPI Tailstock Quill diameter: 30 mm Hnodpfxobxkl Tj Acuou Quill taper: 2 Morse Quill travel: 80 mm Coolant Equipment Coolant tank capacity: 23 litres Net Weights Lathe on workbench, approx. 225 kg Lathe on cabinet base, approx. 550 kg

Sąlyga: geras (naudotas), Center height: 130 mm Center distance: 450 mm Speed: approx. 55–3000 rpm Hnjdpfxjcuhvue Acusu Pneumatic clamping system Spindle nose: W 25 Various W25 collets available Various holders available BERGER LAHR axis motors Combitec EIP E-500 control unit Manual for control included Coolant system included Machine lamp included Machine feet included Dimensions (LxWxH): approx. 1400x560x1230 mm Weight: approx. 550 kg Various versions of "Schaublin 102" in stock!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Schaublin 102N-VM-CF hochpräzisions-Drehmaschine aus Schweizer Fertigung Baujahr: 2005 Hedpfx Asw N Rh Ajcuenu Max. zulässiger Umlaufdurchmesser über Bett: 200 mm Max. zulässiger Umlaufdurchmesser über Support: 120 mm Spitzenhöhe: 102 mm Spitzenweite: 450 mm Bettlänge: 1000 mm Betthöhe: 168 mm Motorleistung: 4,2 kW Spindeldrehzahl: 100 - 3000 U/min Spindelaufnahme: W25 Querweg X-Achse: 100 mm Auflösung X-Achse (Radius): 0,01 mm Längsweg Z-Achse: 90 mm Auflösung Z-Achse (Radius): 0,01 mm Leitspindel: - 8 Längsvorschübe - Größere Vorschübe möglich bei Nutzung der Gewindesteuerung zum Drehen Maximaler Werkzeugquerschnitt (Multifix-System): 10x10 mm Stangenspanner (Multifix-System), Durchmesser: 20 mm Höhen- und seiteneinstellbarer Reitstock: Innenkonus Hülse: MK2 Reitstockdorn-Ø: 30 mm Reitstockweg: 80 mm Kühlmitteltank: 23 Liter Elektr. Anschlusswert: 400 V Abmessungen (L x B x H): 1500 x 510 x 1550 mm Zubehör / Optionen: - ACU-RITE Digitalanzeige, 3-Achsen (X-Z-Z1): X-Auflösung 0,001 mm Z-Auflösung 0,005 mm Z1-Auflösung 0,005 mm - Kühlmittelanlage - Rückseitige Blechverkleidung - Doppeltes Start/Stopp-Pedal mit Spindelumkehr - Schaublin W25 Spannzangensatz - Gussfutter W25 Ø110 mm mit Backen - Multifix-A Schnellwechselrevolver mit Haltern - Antriebssystem für Zusatzaggregate mit Riemen, verstell- und schwenkbare Riemenspannvorrichtung, kompletter Antrieb mit Motor, Riemen Ø6x2.500 mm - Reitstock - usw. Unter Strom in unserem Lager verfügbar.