Schaublin 120 Vm pirkti naudotą (55)

Sąlyga: naudotas, Manufacturer: Schaublin In our assessment, the machine is in good used condition and can be inspected under power by prior appointment. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications and errors in the technical data and information as well as prior sale are reserved. Kfjdpfxow A Ap Te Abkja

Sąlyga: labai geros būklės (naudotas), The used SCHAUBLIN 120 VM precision centre lathe is a Swiss-made manual lathe of medium/small size, with a centre height of 120 mm, a distance between centres of 600 mm, and a spindle bore of 25 mm. The machine is equipped with feeds and various accessories, already complete with electrical cabinet and wiring compliant with standards; accessories and condition as per photos. Ksdpfxewqxcfo Abkjfa

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Schaublin 102 VM Iš viso sandėlyje bus 8 vnt Kaina nurodyta už vienetą Ksdpsxq D Nuofx Abkjfa

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, High-Precision Lead Screw Lathe Schaublin 102N-VM Technical Data: >> Machine No.: 283152 >> Centre Height: 102 mm >> Distance Between Centres: 450 mm >> Spindle Bore: 25 mm >> Longitudinal Feeds: 8 settings from 0.02–0.3 mm/rev >> Metric Threads: 20 pitches from 0.25 to 4 mm >> Imperial Threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse Taper 2 (MT2) >> Infinitely Variable Speed Range: 270–3000 rpm >> Weight: approx. 700 kg Accessories: Ksdpewvq Tmsfx Abkofa >> 3-jaw chuck with 2 sets of jaws >> Tool holder with 6 tool pockets >> Quick collet closer, draw tube, and 34 collets >> Coolant system >> Cutting tools, drill chuck (see photos) >> Operating manual with spare parts list About the Machine: For sale is a Schaublin 102VM lead screw lathe in very good condition. The machine is, of course, fully functional. All slides run smoothly and evenly. Even at high speeds, the 102VM runs quietly. The gear set for thread cutting is included, although it may not be complete. Take advantage of the opportunity to inspect this machine under power on site and see its excellent condition for yourself.

Sąlyga: naudotas, Working Area Centre Height: 102 mm Centre Distance: - with standard headstock: 450 mm - with reduction gear headstock: 375 mm - over bed: 200 mm Kjdjbxkl Tjpfx Abksfa - over cross-slide: 120 mm Headstocks Spindle nose for collets type Schaublin W25 Spindle bore: 25 mm Collet through-hole: 20 mm Reduction gear ratio: 1:5 Bed Height x width x length: 168 x 130 x 1000 mm Bed made of cast iron, trapezoidal profile as on lathe 102 N, hardened and ground dovetail guideways. Slides Maximum travel on bed: 400 mm Tool slide width – length: 80 – 194 mm Manual adjustment travel: 90 mm Centre height over tool slide: 20 mm Tool holder shank: 12 x 12 mm Cross-slide width – length: 94 – 300 mm Manual adjustment travel: 100 mm Saddle guide length on the bed: 250 mm Leadscrew Leadscrew for longitudinal turning and thread cutting, Ø 40 mm Leadscrew hardened, thread ground, pitch 4 mm Speed Range Spindle speed: 270 – 3000 rpm Longitudinal feed: 0.02 – 0.3 mm/rev Thread Cutting Maximum pitch with standard change gear set: 4 mm Machine plate for 20 metric pitches: 0.25 – 4 mm Machine plate for 25 imperial pitches: 80 – 6 TPI Tailstock Quill diameter: 30 mm Quill taper: 2 Morse Quill travel: 80 mm Coolant Equipment Coolant tank capacity: 23 litres Net Weights Lathe on workbench, approx. 225 kg Lathe on cabinet base, approx. 550 kg

Sąlyga: geras (naudotas), Centre height: 102 mm Centre distance: 450 mm Lead / feed screw W20 collets available Speed: approx. 210 – 3000 rpm Reduction gearbox Left and right rotation 2-speed drive Dimensions (L x W x H): approx. 1760 x 595 x 1230 mm Weight: approx. 650 kg Various "Schaublin 102" models available in stock! Kjdpfscug H Sox Abkofa

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Schaublin 102N-VM-CF hochpräzisions-Drehmaschine aus Schweizer Fertigung Baujahr: 2005 Max. zulässiger Umlaufdurchmesser über Bett: 200 mm Max. zulässiger Umlaufdurchmesser über Support: 120 mm Spitzenhöhe: 102 mm Spitzenweite: 450 mm Bettlänge: 1000 mm Betthöhe: 168 mm Motorleistung: 4,2 kW Spindeldrehzahl: 100 - 3000 U/min Spindelaufnahme: W25 Querweg X-Achse: 100 mm Auflösung X-Achse (Radius): 0,01 mm Längsweg Z-Achse: 90 mm Auflösung Z-Achse (Radius): 0,01 mm Leitspindel: - 8 Längsvorschübe - Größere Vorschübe möglich bei Nutzung der Gewindesteuerung zum Drehen Maximaler Werkzeugquerschnitt (Multifix-System): 10x10 mm Stangenspanner (Multifix-System), Durchmesser: 20 mm Höhen- und seiteneinstellbarer Reitstock: Innenkonus Hülse: MK2 Reitstockdorn-Ø: 30 mm Reitstockweg: 80 mm Kühlmitteltank: 23 Liter Elektr. Anschlusswert: 400 V Abmessungen (L x B x H): 1500 x 510 x 1550 mm Zubehör / Optionen: - ACU-RITE Digitalanzeige, 3-Achsen (X-Z-Z1): X-Auflösung 0,001 mm Z-Auflösung 0,005 mm Z1-Auflösung 0,005 mm - Kühlmittelanlage - Rückseitige Blechverkleidung - Doppeltes Start/Stopp-Pedal mit Spindelumkehr - Schaublin W25 Spannzangensatz - Gussfutter W25 Ø110 mm mit Backen - Multifix-A Schnellwechselrevolver mit Haltern - Antriebssystem für Zusatzaggregate mit Riemen, verstell- und schwenkbare Riemenspannvorrichtung, kompletter Antrieb mit Motor, Riemen Ø6x2.500 mm - Reitstock - usw. Unter Strom in unserem Lager verfügbar. Kodpfx Abow N Rh Ajkjfa

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Schaublin 135 High-Precision Lathe with NEW K&C 3-Axis Digital Readout and Accessory Cabinet in Excellent Condition! Technical Data: >> Machine No. 252409 >> Center height: 135 mm >> Distance between centers: 630 mm >> Swing over bed: 315 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric threads: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed: 55–3000 rpm Kfsdpfxox I Nkus Abksa >> Total power requirement: 4.45 kW >> Weight: approx. 1,200 kg Accessories: >> NEW 3-axis digital readout by K&C, 12-month manufacturer’s warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter mode, quick zero setting, counting direction switching Accessory cabinet contents: >> Multiple 3-jaw chucks with several sets of jaws >> Multifix A with holders >> Internal and external quick-change collet chucks >> Change gears >> 4-jaw chuck >> Face plate >> Fixed and travelling steady rests >> Coolant system >> Center points >> Operating manual >> Turning tools and much more About the machine: Offered here is a Schaublin 135 high-precision lathe. The machine is in very good condition, comes from a university, and has seen little use. Fitted with a brand-new K&C 3-axis digital readout and extensive accessories. Take advantage of the opportunity to inspect the machine under power on site and see the condition for yourself.

Sąlyga: naudotas, Techniniai duomenys: X eiga: 700 mm Kedpfx Ajxtnn Tebkofa Sūkiai: iki 1500 aps./min Pavaros greitis: 12 - 1000 mm/min Stalo matmenys: 1100 x 250 mm Galva pasukama: taip Matmenys, apytiksliai: 1750 x 1600 x 1850 mm Svoris, apytiksliai: 1900 kg

Gamybos metai: 1998, veikimo valandos: 1 339 h, Sąlyga: paruoštas naudoti (naudotas), Valdymo blokas Prekės ženklas: FANUC Modelis: Series 18i-T Pagrindinis pavara Ašių skaičius: 4 Veleno greitis: 4000 aps./min. Įrankio tvirtinimas: VDI 30 Ši 4 ašių SCHAUBLIN 65 TM-3 pagaminta 1998 metais. Tai tvirta horizontalioji tekinimo staklė, kurios didžiausias tekinimo skersmuo – 380 mm, ilgis – 534 mm. Veleno ir sukamo įrankio greitis siekia iki 4 000 aps./min, 12 pozicijų bokštelis su varomais įrankiais, tad turite puikią galimybę įsigyti SCHAUBLIN 65 TM-3 horizontalų tekinimo staklę. Daugiau informacijos – susisiekite su mumis. Kfedpsx D Itwefx Abkea Pritaikymo sritys Tekinimas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, Fanuc Series 20-T control Turning diameter: 330 mm Bar diameter: 42 mm Turning length: 650 mm Spindle speed: 5,000 rpm 8-position turret Minimum quantity lubrication Kfjdpowh U Dtofx Abkja

Sąlyga: naudotas, bendras aukštis: 1 700 mm, bendras plotis: 1 600 mm, bendras ilgis: 1 800 mm, Savaiminis svoris: 1.650 kg - Dokumentacija prieinama: Taip - CE sertifikatas: Ne - Valdymas: Konvencinis - Galia [kW]: 4,0 - Ašių skaičius [vnt.]: 3 - X ašies eiga [mm]: 700 - Y ašies eiga [mm]: 550 - Z ašies eiga [mm]: 430 - Stalo ilgis [mm]: 1100 - Stalo plotis [mm]: 255 - Įrankio tvirtinimas: ISO30 Kfjdpfx Aowni Akobksa - Min. veleno sūkių skaičius [aps./min.]: 38 - Maks. veleno sūkių skaičius [aps./min.]: 1500 - Papildomos parinktys: Skaitmeninis indikatorius - Skaitmeninio indikatoriaus tipas: Sony - Transportavimo matmenys: 1800mm x 1600mm x 1700mm (i x p x a) - Transportavimo svoris [kg]: 1650kg - Transporto pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas į keitimą galimi bet kuriuo metu viskam iš pramonės sektoriaus Lukas van Rossum

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 312560, Completely overhauled – newly painted, New worktable Country of origin: Switzerland Voltage: 380V, 50Hz, 3Ph Customs tariff number: 8458.1930 TECHNICAL DATA - Centre height: 102 mm - Distance between centres, headstock type W, standard: 470 mm - Distance between centres, headstock W with reduction gear: 375 mm - Swing over bed: 200 mm - Swing over cross slide: 120 mm Bed: - Height-width-length: 168-100-1000 mm Bed made of cast iron with ground trapezoidal profile Headstocks: - Spindle nose for collets: W-25 - Collet through hole: 19.0 mm - Reduction ratio of gear transmission: 1:5 Cross slide: - Cross slide travel, longitudinal: 90 mm - Cross slide travel, cross: 100 mm - Tool shank cross-section: 12x12 mm Tailstocks: - Quill taper: Morse 2 - Quill travel (tailstock with leadscrew and handwheel): 80 mm Errors and omissions excepted. The technical data is provided without obligation. Inventory No. 2210049, machine consisting of: 1 Bed 105-11 1 Headstock 105-26 1 Cross slide 102-45 1 Tailstock 105-65 1 Voegtle motor 380V/50Hz/3Ph.; 750-3000 rpm; 0.4/0.9 kW 1 set of 40 collets W20, Ø 0.5 to 20 in 0.5 mm increments Kfjdpfx Absdr R Tcokea 1 Tripan 111S toolholder 2 Tripan 131 tool holders 1 Tripan 132 tool holder 1 W20 hollow centre

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Schaublin 135 High-Precision Lathe with NEW K&C 3-axis Digital Readout and Accessory Cabinet from University – Excellent Condition! Technical Data: >> Centre Height: 135 mm >> Centre Distance: 630 mm >> Swing over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025 – 0.35 mm/rev >> Metric Threads: 0.25 – 14 mm >> Tailstock Taper: MK3 >> Infinitely variable spindle speeds: 55 – 3000 rpm Kfedex H Szyspfx Abksa >> Total connected load: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> NEW K&C 3-axis digital readout, 12 months manufacturer’s warranty, including operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, count direction switching Accessory cabinet contains: >> 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B, 3 pockets >> Internal and external collet rapid clamping systems >> Change gears >> 4-jaw chuck >> Faceplate >> Fixed and travelling steady rests >> Coolant system >> Centre points >> Operating manual >> and much more About the machine: Offered is a Schaublin 135 High-Precision Lathe. The machine is in very good condition, coming from a university with low operating hours. Equipped with a NEW K&C 3-axis digital readout and extensive accessories. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Sąlyga: geras (naudotas), Travel paths 300 x 150 x 355 mm Table size 700 x 250 mm Spindle mount ISO 30 Spindle speeds 58-2000 rpm Kedpfju Eqixox Abkofa With digital readout Various accessories MARCELS MASCHINEN CH

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1968, Baigiamoji tekinimo staklės, tekinimo staklės, tekinimo suoliukas, valdomos ir traukiančios veleno tekinimo staklės, valdomos ir traukiančios veleno tekinimo suoliukas -Gamintojas: Schaublin, valdomos ir traukiančios veleno tekinimo suoliukas, tipas 135 -Staklių lova: grūdinta -Tekinimo ilgis: 750 mm -Tekinimo skersmuo virš lovos: 315 mm Kedpsw Rd Hbjfx Abkefa -Tekinimo skersmuo virš išėmos: 355 mm -Tekinimo skersmuo virš suporto: 150 mm -Veleno skylė: Ø 34 mm -Veleno apsukos: 45 - 3000 aps/min -Pleikinio strypo griebtuvas: Forkardt Ø 160 mm -Uodegos įvorė: MK3 -Pavaros galia: 1,5/3,0 kW -Priedai: stalčius spinta su 2 lunetėmis, 28 Multifix įrankių laikikliai, įtempimo žiedai, žiūr. nuotraukas -Tekinimo staklių matmenys: 960/1700/H1290 mm -Tekinimo staklių svoris: 1230 kg -Spintos matmenys: 480/725/H1000 mm -Spintos svoris: 222 kg

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, plotis centre: 630 mm, veleno skylė: 40 mm, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 14 aps./min, bendras svoris: 1 500 kg, Įranga: sūkių greitis be galo kintamas, Schaublin 150A Staklės Kjdpfx Abox Ddamekofa Specifikacija Gamintojas: Schaublin Tipas: 150 Pagaminimo metai: Nežinoma Valdymas: Konvencinis Didžiausias tekinimo skersmuo: 340 mm Atstumas tarp centrų: 630 mm Pagrindinis velenas Sukimosi greitis: 14 iki 3000 aps./min. Tvirtinimas: Camlock D1-4'' Griebtuvėlių tvirtinimas: Schaublin B32 Papildoma įranga Multifix B + 5 įrankių laikiklių 3 ir 4 žandų griebtuvas Priešcentrinis stovas B32 griebtuvėlių rinkinys Aušinimo sistema Heidenhain DRO (ND780, 3 ašys) Staklių lempa Reduktorius Greito užveržimo įtaisas Ir kt.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Schaublin tekinimo staklės, 125B tipas, labai geros būklės. Techninės specifikacijos: - Apdirbimo skersmuo virš lovio: 270 mm - Atstumas tarp centrų: 500 mm - Sukimosi greitis: 40-3000 aps./min. Kodpfx Ajx Auv Ajbkofa Priedai: - Heidenhain ND780 skaitmeninis indikatorių dviejose ašyse - Multifix įrankių laikiklis su 6 laikikliais - 3-žnyplių savicentravimo griebtuvas su vidinėmis ir išorinėmis žnyplėmis - Komplektas keičiamų krumpliaračių - 2 x griebtuvas gręžtuvui - Besisukantis centras - Staklių kojos - Pavara flanšas - Spaustukų rinkinys su vilkimo strypu - Staklių apšvietimas

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, mašinos/transporto priemonės numeris: 350735, Country of Manufacture: Switzerland Voltage: 400V Net weight: 1570 kg Customs tariff number: 8458.1120 External dimensions: 1830x1260x1700 mm TECHNICAL DATA Capacities Maximum turning diameter: Ø 270 mm Maximum permissible diameter over the cross slide: Ø 115 mm Center height over the cross slide: 60 mm Turning length B32: 265 mm Headstock: A2-4 Spindle for Schaublin collets: W20 / W25 / F38 / B32 Kodpfohr Rtnox Abkefa Spindle speed, stepless: 50 - 5,000 rpm Spindle inner diameter (without collet key): 39 mm Maximum bar passage through W20 collet: 14.5 mm Maximum bar passage through automatic chuck: 32 mm Maximum recommended turning diameter: 200 mm Pneumatic Clamping Adjustable axial clamping force, force at 5 bar: 1,150 daN Cross Slide Cross travel, X-axis: 180 mm Resolution, X-axis (on the radius): 0.0005 mm Drive by AC motor, continuous / intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm Drive by AC motor, continuous / intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm Feeds Working feed, X and Z axes, stepless: 0 - 5 m/min Rapid feed, X and Z axes: 8 m/min Feed forces, X / Z axes, stepless: 503 / 503 daN Tool System: Turret Standardized toolholder mounting: VDI 20 Number of tool stations: 8 Number of stations for driven tools: 4 Drive by AC motor, continuous / intermittent: 0.55 / 1.1 kW Spindle speed, stepless: 30 - 5,000 rpm Maximum tool cross section: 16 x 16 mm Integrated coolant supply and indexing in both directions of rotation: yes Coolant Tank capacity: 55 L Pump delivery rate: 10 L/min Pressure: 1.7 bar Pneumatic Tailstock Sleeve taper: Morse 3 Outer diameter of sleeve: 45 mm Sleeve travel: 70 mm Adjustable support force: 25 - 260 daN Center height from floor: 1,162 mm Technical data is subject to change and provided without obligation; errors excepted.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Schaublin 135 High-Precision Lathe with 3-Axis Digital Readout ELESTA and Accessory Cabinet from University – Excellent Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feed: 0.025–0.35 mm/rev >> Metric threads: 0.25 – 14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: Ksdpfx Abjx Hivnskefa >> 3-axis digital readout ELESTA (Heidenhain scales) >> Accessory cabinet containing: >> 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B quick-change toolpost, 3 holders >> Internal and external collets with quick-change mechanism >> Change gears >> Eccentric chuck >> Faceplates >> Fixed and travelling steadies >> Coolant unit >> Centre points >> Operating manual >> And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university with very little use. Fitted with a 3-axis digital readout and a wide range of accessories. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Sąlyga: geras (naudotas), Swing diameter over bed: 270 mm Kfjdpetwpyaofx Abkja Center height: 125 mm Distance between centers: 600 mm Spindle speeds: 30-5000 rpm Control: FANUC 18i Manual Guide Various accessories MARCELS MASCHINEN CH

Sąlyga: naudotas, Gamybos metai: 1999, Maks. strypo skersmuo: 42 mm Maks. tekinimo skersmuo: 180 mm Tekinimo ilgis: 350 mm Valdymas: FANUC 18i Pagrindinis / priešpriešinis griebtuvas Sūkiai: 6 000 aps./min Revolverio galvutės laikiklių skaičius: 2 x 12 Įrankio tvirtinimas: VDI 25 X ašies eiga: 170 mm Z ašies eiga: 350 mm CNC tekinimo ir frezavimo centras | SCHAUBLIN - 42S TM-6 su pagrindiniu ir priešiniu griebtuvu, dvigubu revolveriu, pritaikytu varomiems įrankiams, ir komplektuojamas su strypų padavėju. Įranga sukaupusi 7 856 eksploatacijos valandų. Staklės yra geros būklės, galima apžiūrėti įjungtas. Kfsdpoxlugmsfx Abksa Daugiau techninės informacijos rasite pridėtame pasiūlyme. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, plotis centre: 630 mm, veleno skylė: 40 mm, tekėjimo skersmuo: 340 mm, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 55 aps./min, bendras svoris: 1 450 kg, Schaublin 150A Lathe Specifications Manufacturer: Schaublin Model: 150 Year of manufacture: 1997 Control: conventional Max. turning diameter: 340 mm Distance between centres: 630 mm Main spindle Kodowgd R Hopfx Abksfa Spindle speeds: 55 to 3000 rpm Mount: Camlock D1-4" Collet mount: Schaublin B32 Extras Multifix B with 7 tool holders 3- and 4-jaw chuck Tailstock Collet set Coolant system Heidenhain DRO (2-axis) Machine lamp Taper gauge Quick-change toolpost Fixed and travelling steady Etc.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 341966, Country of manufacture: Switzerland Voltage: 400/50/3 Net weight: 2640 kg Customs tariff position: 8458.1120 Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Max. turning diameter: 330 mm Max. diameter over cross slide: 160 mm Center height over cross slide: 83 mm Max. diameter over bed: 430 mm Turning length (depending on equipment): 650 mm Headstock: Standardized spindle nose, allowing use of various collets and chucks via adaptation accessories. Accessories for SCHAUBLIN collets: B45/F48 Max. bar capacity dia.: 36 mm/42 mm Automatic chuck, standard dia.: 170 mm Kfedpfx Asw T Smhsbkoa Direct drive with AC motor, power at 100%/50% ED: 15/18.5 kW Max. torque at 100%/50% ED: 135/165 Nm Max. spindle speed: 5000 rpm C-Axis: Pneumatic clamping cylinder: 2700 daN Cross Slide: Transverse travel, X-axis: 240 mm Radial resolution: 0.0005 mm Driven by AC motor, nominal torque: 3 Nm Ball screw, X dia. x pitch: 32 x 5 mm Longitudinal travel, Z-axis: 720 mm Resolution: 0.001 mm Driven by AC motor, nominal torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Feeds: Working feed, X/Z axes, stepless: 0-5000 mm/min Rapid traverses, X/Z axes: 8/10 m/min Feed force, X/Z axes: 420/670 daN Turret tooling system: Number of tool stations: 8 Standardized tool holder interface: VDI 30 Max. tool shank section: 20 x 20 mm Integrated coolant supply Bidirectional indexing Coolant system: Tank capacity: 120 liters Pump flow rate: 10 l/min Pressure: 5 bar Except for errors or omissions, the technical specifications are provided without commitment.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155x110x160 cm Installed power: 2.10 kW Customs tariff code: 8459.6930 TECHNICAL SPECIFICATIONS Vertical Rectangular Table: - Usable area: 740x200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between slots: 120 mm Fixed Angle Table: - Usable area: 700x250 mm - Number of T-slots: 5 - T-slot width: 12-H7 Kodpfxjw Uc Npe Abkjfa - Distance between slots: 40 mm - Lateral travel: 250 mm (total) Universal Tilting Table: - Usable area: 600x210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between slots: 40 mm - Lateral travel: 350 mm (total) Tilting range in three planes, each direction: 30°- 45°- 30° Spindle Internal Taper: - Horizontal spindle head: ISO 30 (40) - Vertical spindle head: ISO 30 (40) - Universal quick head: SV E20+ES20 Swivel in vertical plane: Vertical spindle head: 360° Longitudinal travel: hand/automatic: 320/300 mm Vertical travel: hand/automatic: 375/355 mm Cross travel: adjustment handwheel: 150 mm Quill travel: 60 mm Reading accuracy at micrometric verniers: 0.02 mm Main motor, kW-rpm: 1.5/1500 Rapid feed drive motor, kW-rpm: 0.45/3000 Coolant device motor, kW-rpm: 0.15/3000 Spindle speed: - 1st range, rpm: 58-375 - 2nd range, rpm: 330-2000 Feed rates - longitudinal or vertical, mm/min: 12-400 - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (quick feed) - Longitudinal or vertical, mm/min: 1200 All technical data provided without obligation or guarantee, except for errors or omissions.