Sauso Purškimo Sienos pirkti naudotą (1 663)

Sąlyga: labai geros būklės (naudotas), Here we offer a Busch dry scroll vacuum pump. Busch Dry Scroll Vacuum Pump Nodsq Ebk Hjpfx Agieku Model: FO 0030 B 0110..ZZ Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in the technical data. All information is provided without guarantee!) If you have any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in steady-state condition according to IEC 60068-3-5, depending on test chamber temperature: timewise ± 1 K Temperature change rate according to IEC 60068-3-5: Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: The water level is below the sample rack Water level = 0 mm: Water level is at the upper edge of the sample rack Data for standard spray device: Njdpfxowc Nvgj Agieku Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B: Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-tempering: Volume: approx. 2000 L Temperature range for pre-tempering: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Data for installation and operation: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feedthroughs: 1 feedthrough Ø 50 mm, installed on left Test chamber volume: approx. 500 liters Refrigerant: R-404a Electrical connection: Nominal voltage: 3/N/PE AC 400V ± 10% 50Hz Nominal power: approx. 26 kW Nominal current: approx. 44.0 A (neutral loaded) Fuse protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to technical modifications and errors in data and specifications!) For further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Tipas: SC/KWT 450 Druskos purškimo kamera Techniniai duomenys: Bandymo kamera: 450 litrų Maksimali apkrova: 100 kg Druskos tirpalo talpa: 180 litrų Išoriniai matmenys: aukštis 920 mm, plotis 1930 mm, gylis 800 mm Bandymo kameros matmenys: aukštis 740 mm, plotis 850 mm, gylis 570 mm Naudojimo sritys: Korozijos bandymai: Druskos purškimo testas: kambario temp. iki +50°C Kondensato vandens testas: kambario temp. iki +45°C Drėkintuvas +75°C Temperatūros pastovumas Laikinis temperatūros nuokrypis ±K. Įtampa: 1/N/PE AC 230V ±10% 50Hz Nominali galia: 2,0 kW; nominali srovė: 8,7 A Kombinacija: Druskos purškimo testas SS: DIN 50021 Kondensato vandens testas KFW: DIN 50017 Normali aplinka (vėdinimas): DIN 50014 Svoris: 180 kg Nedpfx Aow Strcegieku Būklė: naudota Komplektacija: (žr. nuotrauką) (Techninių duomenų pakeitimai ir klaidos galimi, informacija nėra galutinė!) Dėl papildomos informacijos prašome kreiptis telefonu.

Sąlyga: naujas, Here we offer an ULVAC dry vacuum pump. ULVAC Dry Vacuum Pump Solution for harsh process applications Dry vacuum pump ULVAC’s unique approach to utilizing latent heat within the pump body enables the LR / HR / UR series to deliver high performance even under the most demanding conditions. ULVAC focused its engineering efforts on maintaining an extremely uniform, high temperature across all pump stages, making this pump family optimized for CVD and etching applications. Compatible with ULVAC’s ECO-SHOCK system for additional energy savings. Features The LR series pump is designed for load-lock chambers and PVD processes. ULVAC’s unique aluminum design allows for exceptionally even temperature distribution throughout the pump body. The ULVAC LR series pump is intended for applications requiring a heated pump, heated gas lines, and/or heated exhaust lines. Outstanding helium pumping capacity Hermetically sealed motor for safety and ease of maintenance Nedpfsd R U Etjx Agieku Withstands power interruptions of up to 500 ms Internal components are specially treated to ensure a high degree of surface hardness and excellent corrosion resistance. This prevents wear of internal pump parts when exposed to corrosive gases. (LR series) Designed for process gases that generate particulate by-products, such as Si crystal growth furnaces Fore-vacuum pump for turbomolecular and mechanical booster pumps Type: LR600 Condition: new Scope of delivery: (see picture) (Specifications subject to change and error!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Here we offer you a Köhler salt spray chamber. Salt spray chambers: - Versatile testing capabilities from salt spray tests to fully automatic cyclic tests - Easy operation via graphical menu navigation - Custom configurations for a wide range of applications Njdpfenr Hi Sox Agisku - Simple operation via touch panel Internal dimensions (W x D x H, without hood): 1080 x 675 x 580 mm External dimensions (W x D x H): 1940 x 900 x 1220 mm Test chamber volume: 500 liters Chamber temperature: Ambient +5 to 60°C Humidifier temperature: Ambient +5 to 75°C Power supply: 230V, 1-phase, 50/60Hz, 2000W Compressed air: 4.5 – 8.0 bar / 3 Nm³/h Brine tank capacity: 140 liters Construction: Stainless steel Fully overhauled and retrofitted with Comfort control system - Replacement of all electrical components - Replacement of all hose connections Type: HK 500 Weight: 400 kg Condition: Used Scope of delivery: (See image) (Specifications subject to change or error!) Feel free to contact us by phone for any further questions.

Sąlyga: geras (naudotas), Köhler Model: HKS 1500 The Köhler HKS 1500 salt spray chamber is an industrial testing device designed for corrosion tests in accordance with international standards such as ISO 9227 (NSS, AASS, CASS). It is mainly used in the automotive and metal industries to test the resistance of materials and coatings against corrosive environments. Technical Features Model: Köhler HKS 1500 Test chamber volume: approx. 1000 litres Chamber type: Front- or top-loading Control: Touch panel for easy operation Temperature range: Ambient temperature up to approx. 50°C Materials: Corrosion-resistant internal lining, e.g. polypropylene Standards: DIN EN ISO 9227, VDA 233-102, DIN EN ISO 11997-3 This chamber allows both standard salt spray testing and cyclic corrosion tests, and can be individually adapted to specific test requirements. Salt Spray Cabinet Technical Data: Test chamber material: Polypropylene RT - +55°C Test chamber temperature range / Salt spray heating / Salt spray indirect via chamber walls Temperature range – Condensation water RT - +50°C Temperature range humidifier RT - +75°C Heating indirect via chamber walls. Temperature consistency +/- 1.0 K Temperature control digital, resolution 0.1°C (with plain text display) Digital regulation, heating activation via electronic relays without mains interference Salt solution tank: approx. 200 h continuous spraying or external Humidifier reservoir: automatic filling Mist generation: dual-substance nozzle made of acrylic glass Air flow rate: 3.0 m³/h Precipitation rate controlled by electronic dosing pump Nkjdpfewit Erjx Agiou Dimensions: Internal: Width 1030 mm, Depth 880 mm, Height 1100 mm External: Width 1200 mm, Depth 1000 mm, Height 2080 mm Electrical Connection: Nominal voltage: 400 V 3P/N 50 Hz Max. power: 9800 W Connected load: 3.0 kVA (Salt spray) (Condensation water) 2.0 kVA Compressed air connection min. 4.5 bar max. 8.0 bar Water connection (DI water) min. 2.0 bar max. 6.0 bar Disposal: Fog drain NW 32, condensate drain NW 32 Weight: 450 kg Condition: used Scope of delivery: (see picture) Technical details subject to change and errors excepted! For further questions please don't hesitate to contact us by phone.

Sąlyga: geras (naudotas), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion Test Chamber for Salt Spray Tests Specifications: Test Chamber Volume: approx. 1000 L Test Chamber Dimensions (W x D x H1/H2): 1400 x 800 x 800/1020 mm Door Opening Dimensions (W x H): 1300 x 680 mm External Housing Dimensions (WxDxH): 2162 x 995 x 2080 mm Operating Temperature Range: 5°C above ambient up to +80°C High-load version for a maximum load capacity up to 350 kg Process Control: Beckhoff PLC, Color Touchscreen Display, 50 memory slots for test procedures, 50 memory slots for test segments, Nsdjt Igc Sepfx Agisku Ramps: humidity-temperature across the entire working range, Ethernet interface Electrical Connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, 3/4" tap connection, external thread for connection of an ion exchange cartridge Compressed Air: 7-8 bar Waste Water: Siphon / 30 mm ID hose nozzle Exhaust Air: pipe end OD 75 mm Operating modes: Salt spray (fog) Condensed water (CWC) Ambient air ventilation Hot air Controlled humidity

Sąlyga: labai geros būklės (naudotas), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet The cabinet is used to test the ingress of water into enclosures. When used with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. Compliant with DIN VDE 0470 T1 and EN 60529 for testing protection classes IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be reduced to a minimum. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swiveling and replaceable nozzle holders - Adjustable and measurable water flow rate - Test duration control Mechanical Load Data: - Maximum load with test piece (evenly distributed) – - Permissible test sample weight for test sample carrier (total): 25 kg - Spray radius: 200 mm / 400 mm Data for IP Protection Class Testing: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External overall dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1,900 mm - External (D x W x H): approx. 1000 x 1000 x 1,900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operational Data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important Note: Nksdsxg Hrkopfx Agisu “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See photos) (Specifications and technical details subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Sąlyga: naujas, These units are made from galvanized sheet metal and are designed to be fully bolted together. This requires very little space during shipping. The extraction system is developed separately and tailored specifically for each booth to ensure optimal extraction performance. Thanks to the extraction, personnel applying wet paint are not inconvenienced by paint fumes or overspray. Nkodsdy Dv Djpfx Agisu In Elboy Wetline-KF wet paint spray booths, environmental pollution is prevented through the use of a filtration system comprising accordion filters and either cartridge or rolled fiberglass filters. Wet paint particles extracted from the air by the suction fan are captured by the accordion filter located at the rear of the booth. Trace amounts of wet paint particles that are not caught by the accordion filter are retained by the secondary fiberglass filter at the rear. The door system can be installed in various ways at the front access. UV lamps can be integrated into the cabinet to inspect the painting process.

Sąlyga: naujas, ⭐⭐⭐⭐⭐ (5.0) Nsdpfx Asfggcwegioku ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ 12-week delivery time ✈️ ✅✅✅Energy Efficiency Class A+++✅✅✅ ✳️Maintain your liquidity! We offer a wide range of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure both price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEARS WARRANTY ☀️ ✅The Multi-Treat spray pre-treatment machine is used for surface treatment of materials to be painted. It offers the ability to process up to 8 different chemicals with tanks configured according to process requirements. All tanks are made from 316 stainless steel and are insulated. The number of tanks and the number of heated tanks are determined based on process steps. ✅Tank heating is via gas heat exchangers. Processes can be monitored, and times and temperatures for all steps can be set via the PLC touchscreen. ✅Any system errors can be observed at the control panel. The tanks are equipped with automatic floats; the system stops automatically if there is insufficient water or chemicals in the tanks, and the fluid is automatically transferred between tanks as needed to keep the system safe. ✅There is a drip pan underneath all tanks, made from 316 stainless steel. The tanks are made of 2 mm thick 316 stainless steel. All materials undergo penetration testing and are argon-welded and hermetically sealed. Grids in the tanks prevent debris from reaching the pumps. The inside of the cabin is made of 304 stainless steel sandwich panels, while the exterior is powder-coated sheet metal. ✅The panel thickness is 80 mm. Panels are stainless steel filled with polyurethane. PPT ring pipes and nozzles ensure long service life. ✅Thanks to the steam extraction fan, steam from the system is prevented from entering the workspace. The washer cabin doors are container-style and sealed with silicone gaskets. The movable washing platform inside the cabin moves back and forth to clean the materials. Hoses are supported by a mobile carrier system. Each process has its own pumps and a waste pump for emptying tank fluids. The discharge pump connects to the chemical discharge tank. ✅Manual application guns are provided for each process for manual use. The system offers a manual pre-treatment mode. Both drip time and process duration can be set via the PLC control panel; drip time is applicable for manual operation.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2017, Gebr. Wagner Puma 28-40 Airless Pagaminimo metai: 2017 Wagner 28-40 suslėgto oro stūmoklinė pompa su AirCoat komplektacija – naudota Įrenginys naudotas Techninės detalės Perdavimo santykis: 28:1 Maks. oro įėjimo slėgis: 8 bar Nksdpfxex N E Tzo Agiou Maks. našumas: 2,4 l/min Maks. slėgis: 224 bar Maks. antgalio dydis: 0,023” Pristatymo komplektacija Wagner Puma 28-40 AC su sieniniu laikikliu, sumontuotu ant rankinio paletinio vežimėlio 7,5 m medžiagos žarna DN4, 250 bar Wagner purkštuvas Antgalis Įrenginys, be kita ko, tinka šių medžiagų padengimui: Skaidrūs lakai Lakai Glazūros Beicai Gruntai Akrilo dažai

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2016, Gebr. Wagner stūmoklinis siurblys Leopard 35-70 - Spraypack Airless -+ Pagaminimo metai: 2016 Techniniai duomenys: Pavaros santykis: 35:1 Didžiausias oro įleidimo slėgis: 7,1 bar Didžiausias darbinis slėgis: 250 bar Tūris per dvigubą taktą: 70 cm³ Maksimalus taktų skaičius: 60 DH/min Maks. našumas: 4,2 l/min Oro sąnaudos 6 bar slėgyje, dvigubam taktui: 18,6 nl - galima iš karto - Nkedox N E Sqopfx Agisu

Sąlyga: naujas, A two-zone container, divided into a paint booth and a preparation area - External dimensions: 6058x2438x2591 mm - Internal dimensions: 5538x2170x2485 mm - Shipping container: 20DV Nedpfx Agonbd Rrsijku - Door: integrated into the booth door - Window: with metal security grille - Lighting: 4 LED lamps - No assembly required – ready for immediate use - Paint booth wall – fully meshed Control – automatic via external central control unit; Power supply – 380 V Included: Eo3il2moj - Fan – 3 kW - Airflow velocity – 0.7 m/s - Air volume: 9500 m³/h - Recirculation – closed-loop system Heating: - Riello 40G20 oil burner - Heating up time 10–15 min dkm3db - Maximum temperature 800°C Filter system – pre-filter, paint stop filter, cardboard filter, activated carbon filter Safety features: - Emergency stop - Pressure lock on the door - Temperature monitoring system - Fault indicator Equipment: - 16A power socket - Air preparation unit - Pneumatic hose reel

Sąlyga: naujas, The illustrative photos show implementations for the customer-specific 4x7 spray booth. The offer applies only to the spray booth without a preparation area (option to purchase a preparation zone upon customer request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm Nkjdpfer Ha Ehjx Agieu - Entrance gate: 3000x2600 mm (three-winged) - Service door: 640x1800 mm - Structure: stainless steel - Heat exchanger: stainless steel - Panels: filled with mineral wool - Total power: 16 kW - Fully grated flooring - Air supply system: jet turbine 4.0 kW – 2 units - Exhaust system: power turbine 5.5 kW – 1 unit - Ceiling lights: cassettes with LED tubular lamps, 32 units - Side lights: LED panel 120x30 cm – 8 units Power: 48 W – each 1000 lumens - Burner: Riello 40 G20 95-213 kW - The booth is available in various colors

Sąlyga: naujas, - External dimensions: 8125 x 4650 x 4600 mm - Internal dimensions: 8000 x 4500 x 3800 mm - Entrance gate: 4000 x 3800 mm (four-winged) - Service door: 640 x 1800 mm - Construction: stainless steel - Heat exchanger: stainless steel - Panels: mineral wool filled - Total power: 22 kW - Seats: inside/outside (after prior roofing of the cabin by the customer, on their own initiative) - Floor: fully grated - Air supply system: Jet turbine 5.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 1 unit - Ceiling lights: cassettes with LED fluorescent lamps, 36 units - Side lights: LED panel 120x30cm – 12 units Nedpfx Aonbdlbjgijku Output: 48 W – single piece 1000 lumens - Burner: Riello RG5S 160–310 kW - The cabin is available in various colors

Sąlyga: naujas, A two-zone container, divided into a paint shop and a preparation area Nsdonbd Nbopfx Agieku - External dimensions: 6058 x 2438 x 2591 mm - Internal dimensions: 5538 x 2170 x 2485 mm - Shipping container: 20DV - Door: integrated into the cabin door - Window: with metal security grille - Lighting: 4 LED lamps - No assembly required – ready for immediate use Control: Fully automatic via external central control unit Power supply: 380 V Equipment supplied: - Fan: 3 kW - Airflow velocity: 0.7 m/s - Airflow volume: 9500 m³/h - Recirculation: Closed-circuit system Heating: - Riello 40G20 oil burner - Heat-up time: 10–15 minutes - Maximum temperature: 800°C Filter system: Pre-filter, paint stop filter, cardboard filter, activated carbon filter Safety features: - Emergency stop - Pressure lock on the door - Temperature monitoring system - Fault indicator Equipment: - 16A socket outlet - Air preparation unit - Pneumatic hose reel

Sąlyga: naujas, - External dimensions: 7200 x 5200 x 3800 mm - Internal dimensions: 7100 x 5100 x 3100 mm - Entrance gate: 4000 x 3100 mm (four-leaf) - Service door: 640 x 1800 mm - Construction: Stainless steel - Heat exchanger: Stainless steel - Panels: Filled with mineral wool Nkedom Tv I Aopfx Agiou - Total power: 21 kW - Seating: Inside/outside (after prior roofing of the cabin by the customer on their own) - Floor fully ground - Air supply system: Jet turbine 5.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 1 unit - Ceiling lights: Cassettes with LED fluorescent lamps, 32 units - Side lights: LED panels 120 x 30 cm – 12 units Output: 48 W – one-piece 1000 lumens - Burner: Riello RG5S 160–310 kW - The cabin is available in various colors

Gamybos metai: 2020, Sąlyga: geras (naudotas), MINIMAX yra tvirta pusiau pramoninė mašina, sukurta naudoti bet kokio dydžio kepyklose ir konditerijos cechuose. Įrenginio gamybos galimybės suskirstytos į 5 grupes, kiekvienoje jų galima nustatyti iki 99 programų. Naudojant galvos kėlimo ir nuleidimo mechanizmą (skirtingai nei panašiuose įrenginiuose) ir fiksuotą transportavimo stalą, išplečiamos įrenginio galimybės (pvz., galima prijungti mobilius stalus bet kokio ilgio). MINIMAX gali veikti iki 40 taktų per minutę dažniu. Techninės charakteristikos: Gamintojas: JEREMY Modelis: MINIMAX UNO PLUS 60A Padėklų plotis: 60 cm Piltuvo talpa: 40 l Įrenginio matmenys: 75 x 120 x 165 cm Gamybos metai: 2020 Maitinimas: 230 V Įdiegta galia: 2,4 kW Svoris: 350 kg Nedpfoxz Dvvjx Agisku Būklė: naudota, veikianti

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), Dry Air Dryer FarragTech CARD 10 S with Container and 2 x Suction Conveyors ICEVA GS-4mD Nsdpfxex Iduuo Agisku Stock No.: 503577 Machine Type/Device Type: Dry Air Dryer Manufacturer: FarragTech GmbH Model: CARD 10 S Year of Manufacture: 2011 Container Volume: 10 litres Throughput: 2 hrs/3.25 kg/80° ABS Power: 1.1 kW Voltage: 230 Volt Hopper Volume: 70 litres Accessories: 2x Suction Conveyors ICEVA GS-4mD

Gamybos metai: 1996, Sąlyga: reikia remonto (naudotas), Reikalingas remontas sausų orų džiovintuvas. Tinka meistrui ar atsarginių dalių tiekimui. Modelis: CTT 342. Galia: 39 kW. Pagaminimo metai: 1996. Nkedpoxtvcfjfx Agiou

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Labotek Dryer Nsdpfx Asvtxmwegijku Type: DDM 120 ALB Power: 8.9 kW Material Loader Labotek CON-EVATOR Type: PGT 4/DDM Power: 0.5 kW

Gamybos metai: 2020, Sąlyga: naujas, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash facility is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible remains after the process migrates to subsequent stages, saving money and improving wash quality. This is very important, as apparent savings in systems that operate without these solutions can lead to significantly higher costs in the future, related to chemicals and waste disposal, which will simply be higher. Attention should also be paid to issues regarding compliance with the required bath parameters. Research and development have enabled us to develop a car wash system with an optional component drying feature, where hot air is blown by a series of fans after the washing process is complete. The car wash is equipped with an advanced system for creating user-defined macro programs, which can consist of up to 10 steps per tank according to the number of tanks. Processes can be repeated, their order changed, and so forth. Each tank has its own symbol and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out between processes or at the end of the cycle, for example. • Controls installed on the swivel arm for better access • PLC microprocessor control • 7" touch operating panel • Significantly larger number of nozzles compared to other solutions • (Option) Ability to dry components after the washing process • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet metal, double-protected by limit switches • Monitoring system for secure sealing and opening of the full flap • To minimize fluid mixing: separate piping, nozzles, and tanks for each treatment • Intelligent control – in the event of a power failure or sudden shutdown, fluid mixing is not possible • Fully automatic operation Prices are specified in the catalog. Nkedefzq Stjpfx Agisu

Gamybos metai: 2020, Sąlyga: naujas, The use of a photocell in the workpiece area allows measurement of its length, thereby enabling activation of the spray guns when the workpiece enters detection range, and deactivation of the guns immediately after coating is completed. The photocell is provided as standard equipment. Workpiece identification is carried out using special tags. Identification plates with holes are mounted on the workpiece hanger. Based on this, the PLC controller, in conjunction with the photocell, identifies the painted item and activates or deactivates the spray guns at the appropriate moment, resulting in savings of both energy and powder coating material. Vertical contour detection of the workpiece shape: The use of light barriers with horizontal sensors enables the PLC to analyze the vertical profile of the workpiece. The PLC controller calculates the time at which the workpiece should appear in the gun zone; based on this, selective activation or deactivation of the spray guns is possible. Integration of light barriers with multiple sensors, both horizontally and vertically: This approach enables precise measurement of the workpiece’s dimensions, which also allows for manipulator control if required. The benefits of using photocells or light barriers are primarily the savings in powder and energy. Unnecessary spraying is eliminated in areas where no workpiece is present. Precise gun control is achieved through the use of light barriers. Nkedpfefy T Arsx Agisu

Gamybos metai: 2020, Sąlyga: naujas, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash facility is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible remains after the process migrates to subsequent stages, saving money and improving wash quality. This is very important, as apparent savings in systems that operate without these solutions can lead to significantly higher costs in the future, related to chemicals and waste disposal, which will simply be higher. Attention should also be paid to issues regarding compliance with the required bath parameters. Research and development have enabled us to develop a car wash system with an optional component drying feature, where hot air is blown by a series of fans after the washing process is complete. The car wash is equipped with an advanced system for creating user-defined macro programs, which can consist of up to 10 steps per tank according to the number of tanks. Processes can be repeated, their order changed, and so forth. Each tank has its own symbol and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out between processes or at the end of the cycle, for example. • Controls installed on the swivel arm for better access • PLC microprocessor control • 7" touch operating panel • Significantly larger number of nozzles compared to other solutions • (Option) Ability to dry components after the washing process • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet metal, double-protected by limit switches • Monitoring system for secure sealing and opening of the full flap • To minimize fluid mixing: separate piping, nozzles, and tanks for each treatment • Intelligent control – in the event of a power failure or sudden shutdown, fluid mixing is not possible • Fully automatic operation Nedpfx Aoflmdbsgieku Prices are specified in the catalog.

Gamybos metai: 2020, Sąlyga: naujas, The automatic car wash is a solution that allows you to reduce costs, improve quality, and increase the efficiency of the surface preparation process. The automatic car wash facility is equipped with a set of spray pumps. It is designed to ensure that as little liquid as possible remains after the process migrates to subsequent stages, saving money and improving wash quality. This is very important, as apparent savings in systems that operate without these solutions can lead to significantly higher costs in the future, related to chemicals and waste disposal, which will simply be higher. Attention should also be paid to issues regarding compliance with the required bath parameters. Research and development have enabled us to develop a car wash system with an optional component drying feature, where hot air is blown by a series of fans after the washing process is complete. The car wash is equipped with an advanced system for creating user-defined macro programs, which can consist of up to 10 steps per tank according to the number of tanks. Processes can be repeated, their order changed, and so forth. Each tank has its own symbol and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out between processes or at the end of the cycle, for example. Nkodpfxjfy T Szs Agiou • Controls installed on the swivel arm for better access • PLC microprocessor control • 7" touch operating panel • Significantly larger number of nozzles compared to other solutions • (Option) Ability to dry components after the washing process • Ability to create custom advanced programs • Advanced damper system made from acid-resistant sheet metal, double-protected by limit switches • Monitoring system for secure sealing and opening of the full flap • To minimize fluid mixing: separate piping, nozzles, and tanks for each treatment • Intelligent control – in the event of a power failure or sudden shutdown, fluid mixing is not possible • Fully automatic operation Prices are specified in the catalog.