Salos Oro Šildytuvai Tipo 5000 pirkti naudotą (18 528)

Sąlyga: naudotas, Technical Data – IFE Cascade Screens (Vibrating Waste Screens): Manufacturer: IFE Aufbereitungstechnik GmbH, Austria Model: SM 2400 x 5000 F – UW30 Year of manufacture: 2009 Drive motor: 22 kW Rated current: 43 A Overall screen dimensions: 5,000 x 2,400 mm (L x W) Credpfx Aasu Tg Rre Seh Single screen segment dimensions: 950 x 800 x 130 mm (L x W x H) Screen aperture size: 150 x 125 mm Length of screen fingers (steel tubes in front of the screen segments): 400 mm Maximum amplitude: 18.5 mm Weight: approx. 6,600 kg Areas of application: The waste screen is suitable for use in systems for sorting domestic waste, commercial and industrial waste, paper and cardboard, scrap metal, and electronic scrap. Its key advantages are clog-free screening even with the most challenging input materials, high throughput rates, no formation of braids with oversize material, loose discharge of oversize across the entire screen width, and no downtime for screen cleaning. Note: The screen plates / screen segments have been covered with steel plates without screening function over time for use in a paper sorting plant. The steel plates are only spot-welded and can be removed again. Notes on the complete plant: Technical documentation for the machine is available in German only. Inspection of the plant is possible by appointment. We do not assume liability for the technical data or any possible errors.

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, suslėgto oro jungtis: 14 juosta, slėgis: 14 juosta, bendras plotis: 1 310 mm, bendras aukštis: 5 060 mm, bendras svoris: 944 kg, temperatūra: −20 °C, darbinis slėgis: 14 juosta, bakelio talpa: 5 000 l, slėgis (maks.): 14 juosta, We manufacture the offered series pressure tanks in both horizontal and vertical configurations, available in a wide range of pressure ratings and volumes in compliance with the Pressure Equipment Directive 2014/68/EU. This directive specifies the requirements for pressure equipment placed on the market within the European Economic Area (EEA) and applies to pressure vessels operating at a maximum pressure exceeding 0.5 bar above atmospheric pressure. The PED (Pressure Equipment Directive) places the highest priority on product safety. All materials used in the construction of pressure equipment must meet strict quality standards as stipulated by the directive. Design, manufacturing, inspection, and installation processes are carried out to ensure maximum safety. Pressure tanks serve a variety of applications. For example, argon tanks are used for welding alloyed and unalloyed steels, while nitrogen tanks are applied in the pharmaceutical, electronics, gas, and oil industries. Compressed air tanks are typically used for storing and minimizing pulsation and air loss from compressors. When installed in compressor rooms, pressure vessels also aid in cooling compressed air and support the removal of moisture and condensate, thereby extending the service life of compressors by reducing their operating hours. All pressure equipment we produce features CE marking and comes with complete documentation, as required for commissioning approval by the Technical Supervision Authority. We design and manufacture pressure tanks for a broad range of industrial applications. At every stage of cooperation—from inquiry to design intent and approval by the supervisory authority after manufacturing—we provide support from our team of engineers and inspectors accredited as a notified body. Our tanks are suitable for use with a variety of media, including compressed air, oxygen, nitrogen, industrial gases, water, and as bulk material containers for the medical and chemical sectors. Codpfx Aajr En Ttj Sorh We manufacture both horizontal and vertical tanks in a wide range of pressures and volumes, fully in accordance with the Pressure Equipment Directive 2014/68/EU. Our in-house design office enables us to undertake custom and non-standard projects with the requisite authority and competence.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, New KAESER Compressed Air Receiver, 5000 Liters, Vertical Design, Galvanized 11 bar Incl. Pressure Gauge and Fitting Set Year of Manufacture: 2025 High-quality compressed air receiver in galvanized finish. Hot-dip galvanized inside and out according to DIN EN ISO 1461. Connection nozzles for tapered threads. Technical data: Volume: 5000 liters Max. Overpressure: 11 bar Diameter: 1400 mm Tank height: 3570 mm Weight: 1050 kg Compressed air inlet connection: 2x DN 100 Compressed air outlet connection: 2x DN 100 Safety valve connection: G 2" Pressure gauge set connection: G ½ Crjdpfx Aokzkfrsa Ssh Condensate drain connection: G 2½ Vessel approval: RL 2014/68/EU Service openings according to AD2000: 1x manhole Min. operating temperature: -10°C Max. operating temperature: +50°C Surface coating: galvanized Convenient leasing for new machines available through our in-house bank. Visit our showroom. We always have a large selection of new and used compressors in stock.

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, suslėgto oro jungtis: 11 juosta, slėgis: 11 juosta, bendras plotis: 1 310 mm, bendras aukštis: 5 060 mm, bendras svoris: 794 kg, temperatūra: −20 °C, darbinis slėgis: 11 juosta, bakelio talpa: 5 000 l, slėgis (maks.): 11 juosta, The offered series of pressure tanks are manufactured by us in both horizontal and vertical orientation, available in a wide range of pressures and volumes, all in compliance with the Pressure Equipment Directive 2014/68/EU. This directive sets forth the requirements for pressure equipment placed on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure greater than 0.5 bar above atmospheric pressure. The PED places great emphasis on product safety. Materials used for the construction of pressure equipment must meet strict quality standards as outlined by the directive. Design, manufacture, inspection, and installation must all be carried out to ensure operational safety. Our pressure tanks serve a variety of applications. For example, argon tanks are used in welding alloyed and non-alloyed steels, while nitrogen tanks find uses in the pharmaceutical, electronics, gas, and oil industries. Compressed air receivers are used internally for air storage, pulsation dampening, and minimizing air loss produced by compressors. When installed in compressor rooms, pressure vessels also aid in cooling compressed air and assist in the removal of water and condensate, thereby playing a supporting role in air purification. Additionally, our tanks extend the service life of compressors by reducing their operating cycles. All pressure equipment manufactured by us bear the CE mark and come with comprehensive documentation required for commissioning approval from the Technical Inspection Authority. We design and manufacture pressure tanks for industrial applications in the broadest sense. Throughout every stage of cooperation—from the initial inquiry, through design concept, up to acceptance by authorities—our engineering and inspection team from the notified body provides full support. We offer tanks designed for use with a variety of media: compressed air, oxygen, nitrogen, process gases, water, and bulk materials for the medical and chemical industries. Crodpor En Taefx Aa Sjh Our tanks are manufactured both horizontally and vertically, across a wide spectrum of pressures and volumes, in full compliance with the Pressure Equipment Directive 2014/68/EU. We operate our own in-house design department, allowing the execution of custom and atypical projects, with all necessary approvals and certifications.

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, suslėgto oro jungtis: 8 juosta, slėgis: 8 juosta, bendras plotis: 1 310 mm, bendras aukštis: 5 060 mm, bendras svoris: 649 kg, temperatūra: −20 °C, darbinis slėgis: 8 juosta, bakelio talpa: 5 000 l, slėgis (maks.): 8 juosta, We manufacture serial production pressure tanks in both horizontal and vertical configurations, offering a wide range of pressures and volumes in compliance with the Pressure Equipment Directive 2014/68/EU. This directive sets forth the requirements for the placing on the market of pressure equipment within the European Economic Area (EEA) and applies to equipment with a maximum pressure exceeding 0.5 bar above atmospheric pressure. The PED places a strong emphasis on product safety. Materials used in the construction of pressure equipment must meet stringent quality standards as specified by the directive. The design, fabrication, testing, and installation of the pressure equipment are carried out to ensure operational safety. Our pressure tanks serve numerous applications. Argon tanks, for instance, are used for welding alloyed and unalloyed steels, while nitrogen tanks are utilized in the pharmaceutical, electronics, gas, and oil industries. Air receiver tanks are used for storage and to reduce pulsation and air loss from compressors. Pressure tanks installed in compressor rooms also play a role in cooling compressed air and provide auxiliary functions, such as removing water and condensate from the air supply. Additionally, these tanks extend compressor service life by reducing running time. Codjr En S Dopfx Aa Serh All pressure vessels manufactured by us bear the CE marking and come with complete documentation as required for commissioning approval by the Technical Inspection Authority. We design and manufacture pressure tanks for a broad range of industrial applications. Throughout every phase of cooperation—from initial inquiry and design intent to inspection and approval by relevant authorities—we provide comprehensive support from our team of engineers and certified inspectors of the designated body. Our portfolio includes tanks designed for use with various media: compressed air, oxygen, nitrogen, industrial gases, water, and bulk material containers for the medical and chemical sectors. We manufacture both horizontal and vertical tanks in a comprehensive range of pressures and volumes as per the Pressure Equipment Directive 2014/68/EU. With our in-house design office, we are able to implement custom and non-standard projects, for which we possess all the necessary competencies and authorizations.

Sąlyga: naudotas, Nauja: Ne Svoris be krovinio: 1 kg Detalė tinkama: sunkvežimiams Tipas numeris: 4722500000 Magnetinis vožtuvas ABS WABCO 4722500000 Codpfxsxict Ae Aa Ssrh NEW-NOUVEAU-NEU-NIEUW OEM: 4722500000 Prekės nr.: J503368005-veiling Naudotas magnetinis vožtuvas ABS WABCO 4722500000

Sąlyga: naujas, Electrostatic Air Filter for Ventilation Systems – Central Extraction ELBARON - RON 15 S oGk – 15,000 m³/h – 230 V – without fan Max. air throughput: 15,000 m³/h Total power consumption*: 3 x 0.02 kW Operating voltage*: 230 V, 50/60 Hz, 1PH + N + PE Dimensions L/W/H in mm: L 701 / W 1020 / H 1945 Colour: RAL 7035* Weight: 445 kg Manufacturer: ISI Industrieprodukte GmbH *Special voltage or special colour available upon request Application: The ELBARON duct air filter series has been designed for central air filtration in production halls as well as for plant and building services engineering. Your advantages: - 15 device variants available - Directly from the manufacturer - High separation efficiency - Modular expandability - Easy maintenance Credsh Rfccspfx Aa Sjh - Low operating costs thanks to reusable filter media - Available in simplex (single-stage) or duplex (two-stage) configuration - Various air flow capacities available - Also available in mirrored design - Robust construction - Quality Made in Germany Based on our proven filtration technology, this filter unit can be used as a central air filtration system in ventilation ducts. The ELBARON technology reliably filters aerosols, oil mist, emulsion mist, and smoke from the air, ensuring clean air in your production hall with minimal effort. Our air filter can also be easily integrated into central machine extraction systems. With ELBARON filter units, downstream heat exchangers or climate units are protected against premature contamination. ELBARON filter technology is based on environmentally friendly electrostatic particle ionization. This makes our filter units the ideal solution for large-scale production facilities due to their high separation efficiency, large capacity, and easy maintenance. Unleash the huge potential of ELBARON duct air filters with low maintenance costs. All our electrostatic filter cells and filter media are easy to clean and reusable.

Sąlyga: labai geros būklės (naudotas), DF separator, oil fine separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter Codpfx Aaswbzzxe Ssrh -Manufacturer: Ecoair, air-oil separator filter type N 2785000 / 49 302 52 171 -Inner/Outer diameter: Ø 110/170 mm -Pitch circle diameter: Ø 210 mm -Quantity: 1 air filter available -Dimensions: Ø 245 x 420 mm -Weight: 3.4 kg.

Sąlyga: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 440 V, tūrio srautas: 5 m³/val, aušinimo tipas: vanduo, dažnis: 60 Hz, energijos suvartojimas: 62 kWh, El deshumidificador de adsorción MX5000 está diseñado para deshumidificar de forma eficiente en aplicaciones de baja humedad. Su construcción hermética garantiza condiciones precisas y sus opciones adicionales ofrecen versatilidad para adaptar el sistema a aplicaciones específicas. El robusto bastidor metálico conformado y los paneles de acceso están fabricados en Aluzink® resistente a la corrosión. El equipamiento estándar incluye un paquete de control básico o, opcionalmente, un controlador con microprocesador. El sistema de control eléctrico cumple con las normas EN 60204 (IEC204). Los componentes eléctricos están montados sobre barras colectoras y fabricados con plástico libre de halógenos. El sistema eléctrico está preparado para hasta 690V y 60ºC. Los deshumidificadores de la Serie MX cumplen tanto con las normas europeas armonizadas como con las especificaciones de marcado CE. Crsdpeuurwzofx Aa Sjh

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Inox bak 500 m³ Diameter: 8 m Csdpevwmrcjfx Aa Sjrh Hoogte: 11,50 m Vanwege de afmetingen worden de tanks door ons in delen gesneden en op locatie gelast. De cilinder is vervaardigd uit AISI316 staal, terwijl de boven- en onderbodem bestaan uit duplex staal. Optioneel kunnen de bodems ook in AISI316 staal worden geleverd. De prijs is inclusief de kosten voor het lassen van de tank.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Mobile coil cart FORSTNER AG 5000 b2mf 1500 Crsdpjmv Hv Aefx Aa Soh Maximum coil width: 1500 mm Load capacity: 5000 kg Inner diameter: 360 - 630 mm Outer diameter: 1100 mm Equipped with 4-arm mandrel Double-supported decoiler with handbrake and steel wheels for mobility

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, mašinos/transporto priemonės numeris: B0508A0463, TRUMPF TruBend Cell 5000 – Zrobotyzowana komórka gięcia | Rok produkcji: 2015 Prasa krawędziowa TruBend 5230 Zrobotyzowany system gięcia BendMaster Cedew Eilyepfx Aa Sjrh System sterowania: TASC 6000 (programowanie robota i prasy przez interfejs maszyny) Specyfikacja prasy krawędziowej: Siła nacisku: 230 ton Długość gięcia: 4250 mm Rok produkcji: 02.2015 Numer seryjny: B0508A0463 Czasy pracy: Czas załączenia maszyny: 33 789,3 h System hydrauliczny: 8 528,8 h Czas pracy belki prasującej: 1 119,9 h Opis: W pełni zautomatyzowane rozwiązanie do gięcia – TruBend Cell 5000 przeznaczona do produkcji wielkoseryjnej i precyzyjnej. Zintegrowany robot umożliwia wydajne gięcie przy minimalnym udziale operatora. Stan: Bardzo dobry, regularnie serwisowany Demontaż, załadunek i transport mogą zostać zorganizowane.

Sąlyga: beveik kaip naujas (parodų įrenginys), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of supply: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit switches off if the water cooling fails or overheats to protect the torch package. These features would typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our view the most functional wire feed case, as the wire spool is safely stored in the closed case. ➤ Fronius Long Intermediate Hose Package – Each set is supplied with a 5-meter connecting hose between the power source and wire feed case, providing more flexibility and better handling. Take the wire feed unit from the main machine to hard-to-reach areas! The connecting hose is neatly mounted on a hook at the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with gas bottle holder available on the market. ➤ Binzel Torch Package – With up/down regulation of amperage directly at the torch. ➤ Ground Cable 3-4m ➤ New pressure regulator from Messer ➤ New basket spool adapter for large wire spools This machine enables welding of almost all materials, including aluminium, steel, and stainless steel (V2A). It features pulse wire programmes and is also suitable for MIG brazing (CuSi), which is frequently used in the bodywork sector. Cjdpfx Aaewbil Ss Ssrh Further options available at extra cost For example: Fronius AW4000/AW5000 Job Master torch package (display on the torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE FULL INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping without issue! ✔ We are also available on WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What condition are the machines in? To clarify: We purchase nearly new used machines, disassemble and meticulously inspect them, replace any worn parts if necessary, and only after a successful test weld do we release them for sale. "All" machines are clean, with no burn holes in the displays and no significant burn marks or dents scattered across the units! You are buying an item that is also ⭐visually appealing and does not look run-down! ►►►Will we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you possess a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash upon personal pickup. ►►►Why buy from us? We are specialists in this Fronius welder series, always stocking 60-80 units – exclusively Fronius, no other manufacturers! We know these machines in detail and do not sell anything we are not thoroughly familiar with.

Gamybos metai: 1987, Sąlyga: labai geros būklės (naudotas), Vollständig mit Schaltschrank, Umzäunung, Hydraulikaggregat, Ventilen, Saftpumpe, Füllstandssensoren, Thermostat usw. Ausgestattet. Auf dieser Presse können verschiedene Früchte wie Äpfel, Birnen, Trauben, Beeren, Himbeeren, Erdbeeren, Quitten, Pektin, Karotten sowie weitere Obst- und Gemüsesorten verarbeitet werden. Cjdpoit Ngljfx Aa Sorh

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, We offer here a high-productivity 3D printer for industrial series production. The system was most recently used with Alupowder AISi10MG. The 3D printer has already been dismantled by the manufacturer. Dismantling and function protocols are available, which confirm that the machine was operational before disassembly. All axes are professionally secured. The machine can be transported on a regular standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture: 08/2018 Laser operating hours: Laser 1 beam on: 5165 hrs. Laser 2 beam on: 5096 hrs. Laser 3 beam on: 5023 hrs. Credevu Syyspfx Aa Soh Trumpf TruPrint 5000 with options Powder Bed Monitoring and Melt Pool Monitoring included Filter unit Accessories: 2 build cylinders 3 dosing cylinders 1 overflow container used 1 overflow container NEW Manuals 4 heat exchangers NEW 2 easy filters NEW 3 NTRON SIL02 oxygen analyzers + sensors NEW 1 oxygen sensor NEW and much more, such as seals, etc. The pallet truck by Armanni CAR.Elev. for swapping containers is also in stock and can be offered optionally. Faster to high-quality 3D components The highly productive, semi-automated 3D printing system TruPrint 5000 prepares you for industrial-scale series production. With features such as an optional 500°C preheating and the full-field multilaser setup featuring three 500-watt TRUMPF fiber lasers, you are ideally equipped for highly demanding industrial applications. The machine produces high-quality parts from a range of metallic materials quickly and reliably—and meets the rigorous quality requirements in tool and mould making, also when 3D printing on preform blanks, as well as in aerospace and medical technology sectors. Optionally, the entire process chain can be executed under protective gas atmosphere: sieving, printing, cooling, depowdering. Combined with external part and powder management and TRUMPF’s monitoring solutions, it is perfectly suited for industrial additive series manufacturing. With the Preform option, the TruPrint 5000 supports hybrid component production. The additively manufactured component structures are built onto a blank. This innovative feature is particularly suitable for easy handling in tool and mould making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (reduced when preheating >200 °C) Processable materials[1]: Weldable metals in powder form, e.g. stainless steels, tool steels, aluminium, nickel-based or titanium alloys Build rate[2]: cm³/h 5–180 Layer thickness[3]: μm 30–150 Max. laser power at the workpiece (TRUMPF fiber laser): W 3 x 500 Beam diameter[3]: μm 100–500 Minimum measurable oxygen content: ppm up to...

Sąlyga: geras (naudotas), 5000 L stainless steel tank with mixer and cooling system. In good condition. Equipped with an integrated jacket around the tank for cooling. Crsdpfsvr E N Nex Aa Seh

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Cedowbh Ifepfx Aa Sjrh Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.

Sąlyga: beveik kaip naujas (parodų įrenginys), FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package, standard from 1.5 m ➤ Fronius carriage ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator With this unit, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It features filler wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in bodywork applications. Codowbknbepfx Aa Sjrh Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further expanding the functions of the TPS unit. ----- IMMEDIATE DELIVERY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For clarification: we purchase nearly new used units, disassemble them, check everything thoroughly, replace any wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean and have neither burn marks on the displays nor numerous burn holes or dents distributed over the unit! You buy from us an item that is presentable and does not look completely worn out! ►►►Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash upon personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the units on site and pay in cash. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – Fronius only, no other brands! We are experts with these units and never sell anything we are not familiar with.

Sąlyga: geras (naudotas), Interface from Fronius Codjwbkf Topfx Aa Sorh

Sąlyga: naujas, The DL E Heavy 620/5000 is a high-performance conventional lathe in the category of heavy-duty lathes, specifically designed for machining large workpieces up to 8000 mm in length and 1600 mm in diameter. Featuring a heavy-duty cast iron frame and a powerful 22 kW motor, it delivers outstanding cutting performance and minimizes vibrations during operation. A practical, joystick-controlled feed system enables precise movements in the X and Z axes. The motorized tailstock is available for centre distances starting from 3000 mm, simplifying workpiece handling. The machine comes standard with a mounted 3-axis position indicator, ensuring increased working accuracy. The user-friendly control panel and clearly arranged buttons provide intuitive operation. Discover the advantages of the DL E Heavy 620/5000 and boost your productivity in the field of conventional lathes. Contact us to request your quote! Crodpfxsww T Txo Aa Ssh

Sąlyga: naujas, Load capacity 5.0 t Workpiece diameter 303 x 2438 mm Feed rates steplessly adjustable 0 - 1745 mm/min Crsdpfx Ajlwt Azja Seh Wheel diameter 305 mm Wheel width 100 mm Total power requirement 0.5 kW Machine weight approx. 0.37 t Space requirement approx. 1.5 x 1.05 x 0.7 m Including foot switch and remote control

Gamybos metai: 2008, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 080700467, Counter (millions): 0.84 Format (mm): min. 120 x 148 (option: 105 x 148) // max. up to 350 x 500 Paper weight: 40 - 300 g/m² Equipment / Additional information: Höhner stitching heads Consisting of: Crjdjhbu Tujpfx Aa Seh - Slitter Cutter Creaser - Inline Bookletmaker DBM 5000 - Auto Spine Master - DBM-500T

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, slėgis: 13 juosta, darbinis slėgis: 13 juosta, For sale is a VEA steam generator with gas burner. Year of manufacture: 1994 Steam output: 5,000 kg/h Steam pressure: 13 bar Condition: As new Delivery available at extra cost Crjdpfsw Hqwyox Aa Soh If you have any questions, please do not hesitate to contact us.

Sąlyga: geras (naudotas), Gamybos metai: 1995, Longitudinal circular saw, Swiss manufacturer, with max. 5.1 m cutting length with lamella carrier max. cutting width 450 mm max. cutting height 160 mm hydraulic feed motor Crodpfswugihjx Aa Sjh

Sąlyga: naujas, Capacity in kg: 1600 kg Fork length: 1150 mm Lift height: 5000 mm Overall height: 2185 mm Machine weight: approx. 0.98 t Dimensions (L x W x H): 1.72 x 0.8 x 2.2 m Pallet truck equipped with: - Triplex mast Crsdpfxovn Uxre Aa Seh - Lithium-ion battery - Fast lifting and lowering - Low overall height