Perviršinio Deficito Procedūrą pirkti naudotą (164)

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 1 200 mm, bendras aukštis: 2 100 mm, bendras plotis: 2 500 mm, tuščias svoris: 750 kg, įėjimo įtampa: 400 V, vandens talpos tūris: 400 l, garantijos trukmė: 12 mėnesiai, DPF DUO PREMIUM = CLEANING CABIN + DPF/FAP FILTER DRYER This set of devices allows for maximum optimization of the regeneration process. An efficiently organized operator can work on three filters simultaneously. Washes Dries Advantages of DPF DUO Premium: -> A separate dryer doubles operational efficiency -> We are the only ones offering a large-diameter hose for DPF connection. Large diameter = more water = more effective cleaning -> Our filter mounting system is free from internal components inside the DPF filter tube that could block the water flow, allowing full utilization of the water and air pumps’ performance and reducing regeneration time. -> Spacious cabin provides flexibility when securing the filter for cleaning. The operator, based on their experience, chooses the most suitable position for washing. -> Protection against excessive filter pressure during cleaning -> Protection against lack of airflow through the filter during drying -> Ability to set individual cleaning programs according to filter capacity -> Stable filter clamping during drying -> Three-stage dirty water filtration system -> Water heating controller Lrodpfjxm Szqox Af Iog -> Insulated water tank -> On-site training available for customers The device enables the removal of soot and ash from DPF/FAP filters without negatively impacting filter structure, restoring up to 99% of the rated flow capacity. Our technologists ensure that the cleaning procedures and detergents used are safe for both the environment and machine operators. The operator uses an endoscopic camera to inspect the filter for mechanical damage. If melting, cracks in the ceramic core, or other visible mechanical defects affecting the DPF filter are detected, regeneration will not be possible. The regeneration process takes place in an enclosed chamber equipped with filters preventing harmful contaminants from escaping into the machine’s room. Water with cleaning solution circulates in a closed loop and is filtered throughout the process, significantly extending the bath’s lifespan. The DPF DUO Premium cleans filters using water, chemical agents, and air. The precisely programmed, computer-controlled sequence of injecting water with chemicals and air—combined with pulses generated by compressed air—ensures highly effective regeneration. After cleaning, an additional device dries the filter with air at 90°C, ensuring complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement. This measurement can also be performed prior to cleaning to compare values before and after regeneration. The device is equipped with a printer for printing test reports. The washing time for passenger car or van filters is 20–40 minutes, enabling regeneration of up to a dozen filters within 8 hours. High efficiency combined with low operating costs ensures a fast return on investment.

Gamybos metai: 2025, Sąlyga: naujas, Universal Testing Machine PM50 Force: 50 kN Traverse stroke: 1200 mm Test area clearance: 400 mm Lredod R Dp Espfx Af Ieg Overall height: 1817 mm Weight: approx. 380 kg Position resolution: 0.01 mm Test speed: 0.03–1000 mm/min Return speed: 1000 mm/min Load cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve recording, the basic software enables both control and data analysis. This allows you to generate various test procedures and create test reports. Additionally, there is the option to further process raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Sąlyga: naujas, Gamybos metai: 2026, Condition: new Year of manufacture: 2026 Stock no.: 080184 Delivery time: February 2026, subject to prior sale Country of origin: Turkey Price: €81,476 Leasing rate: €1,309.77 Special price: €69,300 Press force: 135 t Bending length: 3050 mm Axes: Y1 / Y2 / X and R axis Stroke: 265 mm Distance between frames: 2600 mm Throat depth in side frame: 450 mm Installation height: 530 mm Drive concept: hydraulic Y-axis rapid traverse: 160 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 120 mm/s Backgauge travel X-axis: 500 mm Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel R-axis: 250 mm Table height: 900 mm Oil tank: 150 l Motor power: 15 kW Length: 4250 mm Width: 1700 mm Height: 2850 mm Weight: 9580 kg SPECIAL CAMPAIGN until 07.01.2026 Special price and free SKY 22 control system Standard equipment: - 4 axes (Y1, Y2, X, and R) - CNC CONTROL SKY 22 - Full HD graphic display 21.5” with 2D and 3D representations of programmed workpiece - Intuitive touchscreen operation (easy contour drawing with finger) - User-friendly dialog programming, selectable in 2D or 3D mode - 2D and 3D simulation of bending procedure - Automatic tool selection in 3D mode - Automatic calculation of unfolded sheet length - Automatic bending sequence calculation - Graphical product and tool memory - Correction capabilities - USB ports and Ethernet port for import, backup, and program storage - Windows operating system - Import support for IGES, STEP, DXF files - Servo-driven backgauge on linear guides and recirculating ball screws - Backgauge finger blocks on double linear guides - CNC-controlled crowning - Top tool 1010/A /75°/0.8/105, split and gooseneck - 4-V die block 60x60 2009 (V= 16,22,35 and 50 mm) - Fiessler AKAS laser safety device mounted to upper beam - Sheet support arms on linear guide - Equipment in accordance with CE regulations - Oil filling - Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S: - More stroke, installation height, and throat depth - Higher approach and return speeds of upper beam - Higher backgauge speed Lrodpfx Aswirtnjf Ijg - Backgauge fingers on double instead of single linear guides - More options available such as additional backgauge axes (e.g., Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measurement system, tandem version, alternative CNC controls, etc.

Sąlyga: paruoštas naudoti (naudotas), Sukurta dideliam efektyvumui, Steris VHP-100R sausiklio regeneracijos sistema, modelis RG120, regeneruoja sausiklius, naudojamus garinto vandenilio peroksido (VHP) sterilizacijoje, užtikrindama nuoseklų ir patikimą drėgmės kontrolę. RG120 skirta optimaliam Jūsų VHP sterilizacijos įrangos veikimui palaikyti, pagerinant bendrą proceso efektyvumą ir rezultatyvumą. Tvirta konstrukcija, patogi vartotojo sąsaja ir pažangi regeneracijos technologija paverčia Steris VHP-100R sausiklio regeneracijos sistemą būtina kiekvienai VHP sterilizacija pagrįstai įstaigai, kurioje vykdomos kritinės procedūros. Geros darbinės būklės. Taip pat peržiūrėkite kitus mūsų skelbimus. Lrodpjw Rg Etjfx Af Ieg

Sąlyga: geras (naudotas), Interflow MVK 183 II Microbiological Safety Workbench The safety workbench ensures the highest levels of cleanliness and sterility for any procedures performed inside the enclosure (product protection) thanks to its advanced design. At the same time, the safety workbench provides maximum protection for personnel against hazardous and/or pathogenic substances that may be released during work in the enclosure (personnel protection). A new generation of fans is installed in the safety workbench. As standard, DC motor-driven fans are used, resulting in energy savings of approximately 60 – 70%. This technology offers additional advantages, such as: - Continuous control of the correct air volume. The airflow is continuously measured and, depending on filter pressure drop, is automatically adjusted to the correct value if necessary. The airflow velocities in the working area and the front opening are always correct, right up until the filter’s final pressure drop is reached. Deviations due to fan malfunctions or reaching the maximum filter pressure drop are indicated by both visual and audible alarms. A day/night mode switching function is provided as standard. Audible alarm when: Lsdeiu Uxyjpfx Af Isrg - Front sash is not closed Visual signal when: - Lighting is switched on - Night operation is activated - Acoustic signal is reset - Front sash is not closed - Fan or electronic control malfunction Dimensions (HxWxD): 1.67 x 1.90 x 0.77 m More items – new and used – available in our shop! International shipping costs on request!

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, rida: 8 km, kuro tipas: dyzelinas, Gamybos metai: 2024, Įranga: hidraulika, oro kondicionavimas, We offer a brand-new Zoomlion ZS090V skid steer loader with an operating weight of 3 tons. The machine is available immediately and is ideal for loading, transport, landscaping, as well as road and construction works. - Year of manufacture: 2024 - Equipped with a robust and economical Kubota V2403-CR-T engine meeting current emission standards - The cab provides operator comfort with air conditioning, an ergonomic seat, excellent visibility, and a rear-view camera - Features a hydrostatic drive and a precise hydraulic system ensuring smooth attachment operation and rapid response - Rated operating capacity: 901 kg - 0.5 m³ bucket available at an additional cost - The machine is highly maneuverable, stable, and ready for intensive work in a variety of terrain conditions - Covered by manufacturer’s warranty - VAT invoice provided - Immediate availability – personal collection in Kolbudy or nationwide delivery possible Lsdpoxwd Hyjfx Af Ijrg - Assistance with arranging sea transport from any port in Europe - Additional attachments are available separately – we offer a wide range of accessories to tailor the machine to your specific application. Financing available: We offer purchase options via leasing or credit. We assist in selecting the most beneficial financing solution and handle all formalities. We cooperate with reputable financial institutions: Deutsche Leasing S.A/ MLeasing Sp. z o.o./ Siemens Finance Sp. z o.o./ Pekao Leasing Sp. z o.o. /PKO Leasing S.A /PEAC Poland Sp. z o.o. /Nest Lease S.A / Alior Leasing Sp. z o.o. Financing conditions: - Simplified procedures available up to PLN 1 million - Down payment: from 0% to 45% - Financing period: up to 96 months - Currency: PLN or EUR Contact us by phone or email. I am happy to provide additional information and help select the right attachments. This announcement does not constitute a commercial offer within the meaning of Article 66 §1 of the Polish Civil Code.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, rida: 5 km, kuro tipas: dyzelinas, spalva: žalia, bendras svoris: 5 500 kg, tuščias svoris: 5 500 kg, Gamybos metai: 2025, veikimo valandos: 5 h, Įranga: borto kompiuteris, galinis surinkėjas, guminės vikšrinės juostos, hidraulika, kabina, oro kondicionavimas, papildomi žibintai, žemas triukšmo lygis, I am offering a brand new Zoomlion ZE55GU crawler excavator with an operating weight of 5.5 tons. The machine is available immediately and is ideal for earthmoving, roadwork, landscaping, and construction applications. - Year of manufacture: 2025 - Kubota V2607 engine – powerful, fuel-efficient, and compliant with emission standards - Cab equipped with air conditioning, ergonomic seat, panoramic visibility, and rear-view camera - Variable displacement piston pumps with swash plate; Maximum flow: 154.8 l/min - Digging depth: over 3.8 m - Quick coupler included - Buckets sold separately – so you can select exactly the types you need - Option to mount a hydraulic breaker - The machine is agile, efficient, and ready for operation - Manufacturer’s warranty. VAT invoice available - Immediate availability – collection possible in Kolbudy or delivery within Poland - Assistance with organizing sea transport from any European port - Additional attachments available separately – we offer a wide range of accessories to adapt the machine to specific tasks Ledpfx Ajxwd Haof Isrg Financing options available: We offer leasing or credit purchase solutions. We assist in selecting the best option and handling all formalities. We cooperate with reputable financial institutions: Deutsche Leasing S.A / MLeasing Sp. z o.o. / Siemens Finance Sp. z o.o. / Pekao Leasing Sp. z o.o. PKO Leasing S.A / PEAC Poland Sp. z o.o. / Nest Lease S.A / Alior Leasing Sp. z o.o. Financing terms: - Simplified procedures for amounts up to PLN 1 million - Down payment: from 0% to 45% - Financing period: up to 96 months - Currency: PLN or EUR Call or write for more information—I will be happy to provide details and help select attachments. This advertisement does not constitute a commercial offer as defined by Art. 66 §1 of the Civil Code.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, rida: 10 km, pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, bendras svoris: 21 000 kg, tuščias svoris: 21 000 kg, Gamybos metai: 2025, veikimo valandos: 10 h, I am offering a brand new Zoomlion ZE210GLC crawler excavator with an operating weight of 21 tons. The machine is available immediately and is perfectly suited for large-scale earthworks, road construction, building projects, and industrial applications. - Year of manufacture: 2025 - Equipped with a Cummins B6.7 engine delivering 129 kW, ensuring high performance, reliability, and compliance with current emission standards - Spacious, comfortable operator cabin featuring air conditioning, ergonomic seat, rear-view camera, and ROPS/FOPS safety systems for enhanced protection Lrjdpfx Afoxwd Eve Isg - Variable displacement piston pump with swash plate, providing a maximum flow of 2 × 220 liters per minute. The machine comes with a factory quick coupler and a complete hydraulic installation for auxiliary attachments such as hydraulic breakers, grabs, or shears - Maximum digging depth: approximately 6.7 meters - The machine is stable, robust, and ready for heavy-duty work in challenging terrain conditions - Covered by manufacturer’s warranty - VAT invoice issued - Additional attachments available separately – wide selection of accessories to tailor the machine to specific tasks - Immediate availability; personal collection in Kolbudy or delivery within Poland possible - Delivery to a selected port and assistance with international logistics Financing options available: We offer purchase via leasing or loan. We assist in selecting the optimal option and handle the formalities. We cooperate with reputable financial institutions: Deutsche Leasing S.A/ MLeasing Sp. z o.o./ Siemens Finance Sp. z o.o./ Pekao Leasing Sp. z o.o./ PKO Leasing S.A / PEAC Poland Sp. z o.o. / Nest Lease S.A / Alior Leasing Sp. z o.o. Financing conditions: - Simplified procedures up to PLN 1 million - Own contribution: from 0% to 45% - Financing period: up to 96 months - Available in PLN or EUR Call or write. I am happy to provide further information and help select attachments suited to your needs. This advertisement does not constitute a commercial offer within the meaning of Art. 66 §1 of the Polish Civil Code.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VT 4034 Vötsch Temperature Chamber VT 4034 Air-Cooled Refrigerant: Converted to R-452A Internal dimensions: Height 750 mm, Depth 765 mm, Width 580 mm External dimensions: Height 1,780 mm, Depth 1,595 mm, Width 865 mm Temperature range: -40°C to +180°C Temperature deviation: Temporal ± 0.1 to ± 0.5 K Spatial ± 0.5 to ± 2.0 K Heating rate 3.2 K/min Cooling rate 3.5 K/min Maximum load (evenly distributed across the surface) of the test chamber floor: 60 kg per shelf: 30 kg Total shelf load: 80 kg Test chamber lighting: Halogen bulb 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Upstream fuse: 16 A slow-blow Refrigerant: R-452A Weight: 490 kg / 335 liters For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) Ljdpfxswd Hpaj Af Ierg For further questions, we are happy to answer your call.

Sąlyga: labai geros būklės (naudotas), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working chamber volume: approx. 980 liters Temperature range: -70ºC to +180ºC Total heating rate: approx. 4.1 K Total cooling rate: approx. 1.2 K Heating rate (ºC/min) -65ºC to +71ºC: 6.8ºC Lrjdpeixtitsfx Af Iog Heating rate (ºC/min) -65ºC to +180ºC: 5.6ºC Heating rate (°C/min) -40°C to +85°C: 6.5°C Cooling rate (ºC/min) +85ºC to -40ºC: 4.7ºC Cooling rate (ºC/min) +71ºC to -65ºC: 3.7ºC Cooling rate (ºC/min) +180ºC to -65ºC: 4.3ºC External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V / 5P / N / PE, 35 A Refrigerants: R508B and R404A Weight approx.: 900 kg Type: Thermotron SE-1000-6-6 For your peace of mind as a buyer, please note the following: The following procedures are carried out on our offered chambers in advance: 1. Function test and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see photos) (Specifications and technical data subject to change and errors reserved!) If you have any questions, please do not hesitate to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Tipas: DST 1000 Aprašymas: Parduodama dulkių bandymų kamera DST1000, gamintojas – Testzentrum Baden GmbH. Įrenginys sukurtas IP apsaugos klasės bandymams „Dulkės“ (DIN EN 60529 / DIN 40050 9 dalis). Galimi bandymai tiek su vakuumu, tiek be jo. Valdymas / įranga: Valdymo skydelis su ekranu ir mygtukais Rankiniai reguliatoriai individualiems nustatymams Iš anksto užprogramuotos bandymų procedūros standartiniams testams Techniniai duomenys: Bandomosios kameros tūris: apie 1.000 litrų Kameros matmenys (P × G × A): apie 1.000 × 1.000 × 1.000 mm Bendri matmenys (P × G × A): apie 1.300 × 1.000 × 2.000 mm Maitinimo įtampa: 400 V / 50 Hz, 3~N/PE Srovės suvartojimas: 10 A Bendra elektros galia: maks. 2 kW Ištraukimo jungtis: DN100 flanšas Bandymo galimybės / apsaugos klasės: Apsauga nuo dulkių: IP5X Ledpfx Asxpfx Ujf Ijrg Hermetiška nuo dulkių: IP6X Svoris: apie 350 kg Būklė: naudota Komplektacija: (žr. nuotrauką) (Techninių duomenų pakeitimai ir klaidos galimi!) Daugiau klausimų mielai atsakysime telefonu.

Sąlyga: labai geros būklės (naudotas), Feutron Temperature Test Chamber We offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test Chamber Nominal Volume: 280 liters Dimensions Chamber external dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature Range -70°C to +180°C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Power connection: 400 V 3/N/PE, AC, 50 Hz Ljdsk Scxmjpfx Af Ierg Maximum power consumption: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerants: R507 / R23 For your safety as a buyer, please note the following information! The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run, monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we will be happy to assist you by phone.

Sąlyga: beveik kaip naujas (naudotas), Here we offer you a weathering test device. The Xenotest Beta+ is a premium xenon chamber tester featuring a rotating sample carousel and an exposure area of 4,000 cm². It is equipped with a full suite of parameter control options. Irradiance and temperature are measured and controlled directly at the sample level using XENOSENSIV sensor technology. The Beta+ meets the vast majority of industry standards. Thanks to its large test chamber and high reliability, it is ideally suited for larger sample quantities or oversized specimens. - 3x 2200 W air-cooled xenon lamps - 4,000 cm² exposure area - High irradiance testing up to 120 W/m² (2 suns) Lsdpfx Afoihfrrs Ierg - Touchscreen with color display for monitoring and display of test parameters - Direct setting and control of irradiance (300–400 nm) - Direct setting and control of black standard temperature - Direct setting and control of chamber air temperature - Direct setting and control of relative humidity - Diagnostic message display - Storage for 10 user-defined test methods - Pre-programmed international standard test procedures - Multilingual user interface - Aging-resistant XENOCHROME filters for simulation of outdoor daylight and indoor daylight behind glass - On-rack XENOSENSIV 300–400 nm for measurement and control of irradiance (in W/m²) and BST (°C) at sample level - Selectable temperature control via chamber air temperature (max. 70 °C) or dual control: chamber air temperature and black standard temperature (up to 130 °C) - Fan-assisted temperature differential between chamber and black standard temperature - Ultrasonic humidification system for humidity regulation - Sample spray system with integrated 60-liter water tank - Outer cylinder made of special UV glass - Automatic shutoff by total irradiance, exposure time, or cumulative operating time - Advanced auto start functions - Data output via memory card or RS232 interface - Ethernet interface for connection to internal computer networks and use with XenoTouch Add-Ons 1, 2, and 3 (remote operation, email service, online monitoring) Dimensions: Width x Depth x Height: 900 x 1200 x 1800 mm Weight: 400 kg Type: Xenotest Beta+ Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors reserved!) Please feel free to contact us by phone for further questions.

Sąlyga: labai geros būklės (naudotas), Here we offer a Heraeus Vötsch temperature chamber. Heraeus Vötsch Temperature Chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm Lrjdpfxshrdy Se Af Isg External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Refrigerant: R-404 A / R 23 Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 1.8 kW Rated current: 12 A Type: VT 7011 Important information for your peace of mind as a buyer: The following procedures are carried out on all chambers offered by us: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VTS³ 7018-5 Water-cooled Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 900 mm x Depth 1550 mm x Height 1850 mm Temperature testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: Cooling 7.5 K/min Test chamber volume: 190 liters Rated voltage: 400V Lodpfx Afsn E Sk Es Ijrg Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerants: R404A and R23 For your security as a buyer, please note the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical specifications!) Should you have further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Climate Chamber We offer you a Heraeus Vötsch climate chamber. Lrsdpfx Afepz H Hxe Iog Vötsch Climate Chamber VCS 7033 Water-Cooled Temperature range: -70°C to +180°C Temperature change rate: Heating: 7.5 K/min Cooling: 6.5 K/min Humidity range: 10% to 98% rH Temporal temperature deviation: ± 0.5 K Spatial temperature deviation: ± 1.5 K Test chamber dimensions: Width 675 mm x Depth 650 mm x Height 760 mm Housing dimensions: Width 930 mm x Depth 1565 mm x Height 1840 mm Side port: 90 mm diameter Approx. 330 L, Weight: 600 kg Voltage: 3/N/PE AC 400V ±6/-10% 50Hz Rated power: 9.5 kW Rated current: 17 A Refrigerants: R404A / R23 Type: VCS 7033 For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run which is monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Espec Type: Espec Model: TSA-303EL-W Water-cooled Cold Chamber: -65°C to 0°C Hot Chamber: +50°C to +200°C System: Two-zone test via damper switching Temperature fluctuation: ±0.5°C Hot Chamber: Temperature heating time: Ambient to +200°C within 15 min. Lrjdevgw Uaopfx Af Ijg Cold Chamber: Temperature pulldown time: Ambient to -70°C within 40 min. Temperature recovery: within 10 min. Internal dimensions (W x H x D mm): 970 x 460 x 670 External dimensions (W x H x D mm): 1870 x 1900 x 1770 (1805) Electrical supply: 400 V AC 50Hz, 70A Refrigerants: R449A 5 kg, R23 2.0 kg Weight: approx. 1,450 kg Year of manufacture: 2018 To ensure your safety as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) If you have further questions, we are happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Type: VCL 7003 Climate Test Chamber, Air-Cooled Test Chamber Volume: approx. 34 liters Specifications for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.3 to ±1.0 K Spatial Temperature Uniformity: ±0.5 to ±2.0 K Rate of Temperature Increase: 4.0 K/min Ledsv Tnd Sspfx Af Ijrg Rate of Temperature Decrease: 3.0 K/min Maximum Heat Compensation: 550 W Temperature Calibration Points: +23°C and +80°C Specifications for Climatic Testing: Temperature Range: +10 to +95°C Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Temporal Temperature Deviation: ±0.3 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.5 K Climatic Calibration Points: +23°C / 50% RH and +95°C / 50% RH Internal Chamber Dimensions (W x D x H): 350 mm x 300 mm x 310 mm External Dimensions (W x D x H): 640 mm x 750 mm x 1730 mm Electrical Connection: 1/N/PE AC 230 V ±10%, 50 Hz Rated Current: 11.0 A Maximum Rated Power: 2.5 kW Sound Pressure Level: 59 dB(A) Refrigerants: R-404A / R23 Weight: approx. 130 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out in advance on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See images) (Subject to technical modifications and errors. All information without guarantee!) If you have any further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Thermotron Temperature Chamber We are offering you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-5-5 Internal workspace dimensions (W x D x H): 102 x 100 x 97 centimeters Workspace volume: 986 liters Temperature uniformity: ± 0.5°C Temperature range: -70°C to +180°C Temperature control tolerance: 0.3°C External dimensions (W x D x H): 122 x 188 x 218 centimeters Ledpfxeirmito Af Ierg Electrical requirements: 400/3/50 32.4 A Refrigerants: R-404A / R23 Approximate weight: 862 kg Model: Thermotron SE-1000-5-5 For your peace of mind as a buyer, please note the following information! The following procedures are carried out on our chambers prior to sale: 1. Functional testing and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. Leak test with certification 4. Upon successful testing, the chambers undergo a trial run monitored with calibrated instruments. Condition: used Scope of delivery: (See image) (Specifications may change and errors in technical data are reserved!) For further questions, feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), CEAST Type: 7026.000 CEAST Modular Melt Flow Tester Modular device for determining the melt flow rate Modular device for determining the melt flow rate in g/10 min and cm³/10 min according to international standards. Temperature range: +30 - +400°C (extendable to 500°C). Device features: - Microprocessor for automatic testing, storage of test parameters (25 methods), storage and saving of results for 40 tests; Automatic calculation and display of temperature value and rheological basic data RS232 and USB interface Diagnostics Automatic rotary cutter for cutting extrudate Nozzle locking mechanism Weights: 500, 1000, 1050, 1200, 2160, 3800, 5000, 1600, 2500 The device can be connected to a computer and all functions can be operated via computer interface. The Visual MELT software is used. Standards: ASTM-ISO-DIN-BS-NF-UNI - GOST or equivalent. Procedures A and B. Base model + encoder + lift for raising and lowering the weight + automatic extrudate cutting knife, Code 7026.000 Lrsdpovx Sxdefx Af Ijg Max. force: 1200 N Stroke mm: 220 Volt: AC 230 50 Hz Serv: Temp. (S2 60 sec) Current: 1.8 A Max. velocity: 10 mm/sec Condition: used Scope of delivery: (See photo) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them for you by phone.

Sąlyga: labai geros būklės (naudotas), Weiss Temperature Test Chamber We are offering a temperature test chamber for sale. Weiss Temperature Test Chamber, Water-Cooled Technical data: Model designation: WT-600/70 External dimensions (with hinges and door lock): Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions (without hinges and door lock): Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber capacity: approx. 600 liters Cooling / Heating operation: -70°C to +180°C Temperature change rate: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Lrjdjiqk Abjpfx Af Isg Rated power: 9.1 kW Rated current: 19 A Site circuit protection: 32 A slow-blow Permitted test specimen weight: Total load on shelf supports: 80 kg Test chamber floor: 80 kg, Shelf rack: 40 kg Refrigerant: R 404A / R23 Weight: 675 kg Type: WT-600/70 Important safety information for you as a buyer: The following procedures are carried out in advance on our advertised chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After a successful check, the chambers are subjected to a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (We reserve the right to make changes and correct errors in the technical data and information provided!) If you have any further questions, we will be happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Shock Test Chamber Ledpfen Avcujx Af Ijrg We offer you a Vötsch shock test chamber. Water-cooled Temperature range: -80°C to +220°C Hot chamber: +50°C to +220°C Intermediate chamber: -10°C to +90°C Cold chamber: -80°C to +70°C Mains voltage: 400V ±10% 3/N 50Hz Rated current: 30.5 A Rated power: 13.5 kW Refrigerant VC: R404A 3.00 kg p*: 25 bar Refrigerant CC: R23 15 bar p*: 25 bar Condition: used Type: VT 7012 S3 For your security as a buyer, please note the following information! The following procedures are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with refrigerant in compliance with legal regulations 3. Upon successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (Subject to change and errors in technical specifications and data!) For further questions, we are happy to provide assistance by phone.

Sąlyga: labai geros būklės (naudotas), We are offering a BIA multifunction cabinet. BIA Multifunction Cabinet Temperature range: +15°C to +30°C and humidity Refrigerant: R-404A 230V 50Hz 10A Type: C890TH For your security as a buyer, please note the following information! The following procedures are carried out on our chambers prior to sale: Lrjdpfx Aofktnyof Ijg 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) Should you have any further questions, we are happy to assist you by phone.

Sąlyga: labai geros būklės (naudotas), RS Simulators Type: ST2K320/45 Water-cooled shock test system Operating climate range Temperatures in upper test chamber: Temperature range: +40 °C to +180 °C Temperatures in lower test chamber: Temperature range: -40 °C to +100 °C Ambient temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber weight: approx. 850 kg Important safety information for you as a buyer! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant Lrodpfx Afetqcu Es Ieg 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors. Specifications may vary!) If you have any further questions, we will be happy to answer them by phone.

Sąlyga: labai geros būklės (naudotas), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Performance Data: With a temperature change rate of 25 K/min Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm Temperature range: -72°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 Spatial temperature uniformity: ± 0.5 to ± 2.0 Rate of temperature change (cooling): 25 K/min Rate of temperature change (heating): 25 K/min Heat compensation at -20°C: 8000 W Ljdjtz Rqmopfx Af Ijrg Heat compensation at +20°C: 8000 W Test chamber volume: 270 liters 2x side ports ∅ 125 mm 1x side port ∅ 50 mm Chamber is water-cooled Chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Rated current: 44 A Refrigerants: R-452A and R-23 Weight: approx. 980 kg Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional checks and replacement of necessary components 2. Refilling with legally approved refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.