Perviršinio Deficito Procedūrą pirkti naudotą (142)

Būklė: labai geros būklės (naudotas), Vötsch Type: VTS 7018-5 Water-cooled temperature test chamber System converted to R-452A Iedpfx Ajwq Iymebvjtg Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate cooling: 7.5 K/min Temperature change rate heating: 7.5 K/min Heat compensation at +20°C: 3,000 W Heat compensation at -20°C: 3,000 W Test chamber dimensions: width 580 mm, depth 450 mm, height 750 mm External dimensions: width 870 mm, depth 1280 mm, height 1575 mm Test chamber volume: 190 liters Nominal voltage: 3/N/PE AC, 400V ±10%, 50Hz Nominal power: 100 kW, Nominal current: 21 A Overcurrent protection (on-site): 32 A slow-blow Sound level at 1m distance (free field measurement): < 69 dB(A) Side port: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R-452A and R23 Weight: approx. 460 kg For your safety as the buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors reserved!) Further questions can gladly be answered by phone.

Būklė: labai geros būklės (naudotas), Here we offer you an Iridex Laser System OcuLight TX. IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, cables The OcuLight TX solid-state laser systems emit genuine green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system may result in undesirable side effects. OcuLight TX Ophthalmology: - Retinal photocoagulation - Laser trabeculoplasty - Iridotomy - Iridoplasty Otolaryngology: - Stapedectomy - Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Outstanding efficiency with up to 2500 mW of deliverable laser energy provides pulse durations and intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible selection of delivery devices and a wide range of handpieces for different surgical procedures. Optional remote control and wireless footswitch help reduce clutter and enhance ergonomics and control. Quiet operation eliminates distractions. Lightweight, portable design makes transport between treatment rooms and offices easy. IRIDEX OcuLight TX Green 532 nm Laser - Green treatment laser: 532 nm - Target laser: nominal 632 nm - Cooling: On-demand whisper fan - 10–3000 ms exposure time and repeat interval - Compatible with EndoProbe, LIO, OtoProbe, and SLA - Output power: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW - Weight: 6.4 kg - Length: 15 mm - Width: 30 mm Itodpsnp Icaofx Abvjg - Height: 30 mm - Type: IRIDEX OcuLight TX - Condition: used - Scope of delivery: (see picture) (Specifications and details subject to change and errors reserved!) If you have any further questions, we are happy to answer them by phone.

Būklė: labai geros būklės (naudotas), CTS Type: C-40/60 CTS Compact Climate Chamber, Air-cooled Test volume: 60 litres Temperature range: -40 °C / +180 °C Humidity range: 10% to 98% relative humidity +10 °C to +90 °C within temperature range +5 °C to +89.5 °C within dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Rated voltage: 230V 1/N 50 Hz Power: 3.3 kW Rated current: 13 A For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) Itjdpfx Abju Hlb Eoveg For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Vötsch shock test chamber. Water-cooled temperature shock test cabinet Two-chamber design Hot Chamber: The temperature range of the hot chamber is from +50°C to +220°C Temperature deviation over time at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold Chamber: Temperature range of the cold chamber: -80°C to +70°C Temperature deviation over time at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2,115 mm, height 1,970+ mm Port diameter: ∅ 67 mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1,000 kg For your security as a buyer, please note the following information! The following procedures are performed on our offered chambers in advance: Iedpfx Aeigg Hnjbvjtg 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Model: VT 7012 S2 Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and errors reserved!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), Weiss Temperature Chamber Air-cooled We are offering a Weiss temperature chamber for sale. Weiss temperature chamber with S!MCON / 32 control unit Test chamber volume: approx. 195 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 450 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated current: 14 A Temperature testing data: Temperature range: -42 to +180 °C Temporal temperature deviation (center of usable space): ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4 K/min Cooling: 4 K/min Heat compensation max.: 2300 W Refrigerant: R404 A 2.5 kg Weight: 490 kg Type: WT3 - 180/40 For your safety as the buyer, please note the following information! The following procedures are carried out on all our offered chambers in advance: Itsdogmhrfspfx Abvsg 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful inspection, the chambers are subjected to a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and specifications are reserved!) For further questions, do not hesitate to call us. You may also place written orders via email or fax.

Būklė: geras (naudotas), Type: TS -70/1000-10 For sale: CTS Temperature Test Chamber Model: TS -70/1000-10 Cooling: Water-cooled refrigeration unit, Compressor has been replaced! Features: - Multi-touch control panel - USB and Ethernet interfaces - Feed-throughs for test cables (4 × Ø 125 mm) - Safety temperature limiter Areas of application: - Environmental and endurance testing - Thermal cycling (stress screening) - Quality assurance and R&D - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: Height approx. 1,000 mm, Width approx. 860 mm, Depth approx. 1,100 mm External dimensions: Height approx. 1,950 mm, Width approx. 1,270 mm, Depth approx. 1,900 mm Temperature range: -70 to +180°C Temperature deviation: ±0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Nominal power: approx. 23.1 kW Nominal current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note the following! The following procedures are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) Isdpfoxdi Ezox Abvotg (Specifications and data may be subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Būklė: labai geros būklės (naudotas), CTS Climate Test Chamber Type: C -40/600 Air-Cooled (converted to R-452A refrigerant) Test chamber volume: 600 liters Temperature testing: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K (over time, in steady-state conditions) - Average temperature change rate (without test specimen and without radiant heat): Heating: 2.5 K/min Cooling: 3.0 K/min - Radiant heat max. 2500 W at +20°C Climate testing: Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. Humidity consistency II: ±1% r.h. to ±3% r.h. Temperature consistency: ±0.1 K to ±0.3 K Test chamber internal dimensions (approx.): Height 850 mm, Width 850 mm, Depth 830 mm External dimensions (approx.): Height 1900 mm, Width 1115 mm, Depth 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for buyers! For your safety, the following procedures are carried out in advance on our chambers on offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Itjdpfxsw U Awms Abvsg Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Būklė: geras (naudotas), VLM Isdpfxot Igc Se Abvetg Type: V.745.672.120 Model CC 1000-FL HL Corrosion Test Chamber for Salt Spray Tests Specifications: Test Chamber Volume: approx. 1000 L Test Chamber Dimensions (W x D x H1/H2): 1400 x 800 x 800/1020 mm Door Opening Dimensions (W x H): 1300 x 680 mm External Housing Dimensions (WxDxH): 2162 x 995 x 2080 mm Operating Temperature Range: 5°C above ambient up to +80°C High-load version for a maximum load capacity up to 350 kg Process Control: Beckhoff PLC, Color Touchscreen Display, 50 memory slots for test procedures, 50 memory slots for test segments, Ramps: humidity-temperature across the entire working range, Ethernet interface Electrical Connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, 3/4" tap connection, external thread for connection of an ion exchange cartridge Compressed Air: 7-8 bar Waste Water: Siphon / 30 mm ID hose nozzle Exhaust Air: pipe end OD 75 mm Operating modes: Salt spray (fog) Condensed water (CWC) Ambient air ventilation Hot air Controlled humidity

Būklė: labai geros būklės (naudotas), Weiss Temperature Chamber We are offering a Weiss temperature chamber. Converted to R452a Weiss temperature chamber, air-cooled Temperature range: from -30°C to 180°C Temperature change rate cooling: 1.6 K/min Temperature change rate heating: 2.1 K/min Test chamber dimensions: width 550 mm x depth 750 mm x height 800 mm External dimensions: width 800 mm x depth 1500 mm x height 1800 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.9 kW Rated current: 9 A Refrigerant: R452a Weight: 515 kg Model: WT1-340/30 For your assurance as a buyer, please note the following information! The following procedures are carried out on all chambers we offer prior to sale: 1. Functional testing and replacement of necessary components 2. New charge with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) If you have any further questions, we will be happy to answer them by phone. Itjdpfxeic Rgfj Abvog

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, kuro tipas: hibridas, spalva: kitas, Gamybos metai: 2026, CONSTMACH žiotelės trupintuvai sukurti taip, kad užtikrintų didelį patvarumą ir aukštą smulkinimo našumą, todėl jie idealiai tinka pirminiams smulkinimo darbams karjeruose ir kasyklose. Jie geba apdoroti platų medžiagų spektrą – nuo minkščiausio kalkakmenio iki kietų granito ar bazalto rūšių. Dėl tvirtos konstrukcijos, didelio smagračio sukimo momento ir specialios žiotelės geometrijos užtikrinamas efektyvus ir vienodas smulkinimas. Pažangi hidraulinė reguliavimo sistema leidžia lengvai nustatyti reikiamą produkcijos išėjimo dydį ir sumažina operatoriaus įsikišimo poreikį. CONSTMACH žiotelės trupintuvai užtikrina ilgalaikį naudojimą dėl kalto chromo-nikelio plieno trupinimo svirties, stiprių guolių ir automatinės tepimo sistemos. Suvirintas pagrindinis rėmas, kuriam atlikta terminio įtempimo atleidimo procedūra, išlaiko maksimalų patvarumą net esant didelėms vibracijoms. Ergonomiškas techninės priežiūros dizainas užtikrina nepertraukiamą ir saugią darbo aplinką viso gamybos proceso metu. Įrenginiai gali būti integruoti į stacionarias arba mobilias smulkinimo gamyklas, todėl yra itin lankstūs įvairiems projektams. CJC-60 techninė specifikacija: Žiotelės dydis: 600 x 380 mm Variklio galia: 30 kW Veleno greitis: 330 aps./min. Masė: 6 000 kg Min./maks. reguliavimas: 30–100 mm Našumas: 60–110 t/val. CJC-90 techninė specifikacija: Žiotelės dydis: 900 x 650 mm Variklio galia: 75 kW Veleno greitis: 277 aps./min. Masė: 11 400 kg Min./maks. reguliavimas: 50–150 mm Našumas: 90–270 t/val. CJC-110 techninė specifikacija: Itsdoxqhzuepfx Abvsg Žiotelės dydis: 1100 x 850 mm Variklio galia: 132 kW Veleno greitis: 230 aps./min. Masė: 33 000 kg Min./maks. nustatymas: 60–200 mm Našumas: 150–420 t/val. CJC-130 techninė specifikacija: Žiotelės dydis: 1300 x 1000 mm Variklio galia: 160 kW Veleno greitis: 220 aps./min. Masė: 42 500 kg Min./maks. reguliavimas: 100–280 mm Našumas: 275–790 t/val. CJC-140 techninė specifikacija: Žiotelės dydis: 1400 x 1100 mm Variklio galia: 200 kW Veleno greitis: 220 aps./min. Masė: 52 000 kg Min./maks. reguliavimas: 120–280 mm Našumas: 420–850 t/val. Kodėl verta rinktis CONSTMACH žiotelės trupintuvus? CONSTMACH yra kokybės ir patikimumo simbolis smulkinimo ir rūšiavimo technologijų srityje. Kiekvienas žiotelės trupintuvo modelis gaminamas pagal tarptautinius standartus, užtikrinant maksimalų efektyvumą, žemas eksploatacines sąnaudas ir ilgą tarnavimo laiką. Lankstūs dizaino sprendimai pagal kliento poreikius ir platus aptarnavimo tinklas padeda užtikrinti nepertraukiamą jūsų verslo darbą. Patikima veikla, inžinerijos kokybė ir profesionalus techninis aptarnavimas po pardavimo – CONSTMACH yra patikimas pasirinkimas jūsų smulkinimo sistemoms. Ką mes darome Constmach? Constmach yra lyderiaujantis mašinų gamintojas, aptarnaujantis statybos ir kasybos sektorius, siūlantis platų gaminių asortimentą. Mūsų portfelyje yra betono blokelių gamybos mašinos, stacionarios ir mobilios betono gamyklos, akmens smulkinimo įrenginiai, akmens smulkinimo ir rūšiavimo linijos, smėlio plovimo įranga, smėlio gamybos mašinos, asfalto gamyklos, konvejerių sistemos, žiotelės trupintuvai ir mobilios smulkinimo plantacijos. Aukšti kokybės standartai, inovatyvus gamybos požiūris ir orientacija į klientą užtikrina Constmach prekės ženklo patikimumą tiek nacionalinėje, tiek tarptautinėse rinkose. Dėl patvarumo, efektyvumo ir ilgo tarnavimo mūsų įrengimai yra dažnas profesionalų pasirinkimas.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, CONSTMACH žiotelės trupintuvai sukurti taip, kad užtikrintų didelį patvarumą ir aukštą smulkinimo našumą, todėl jie idealiai tinka pirminiams smulkinimo darbams karjeruose ir kasyklose. Jie geba apdoroti platų medžiagų spektrą – nuo minkščiausio kalkakmenio iki kietų granito ar bazalto rūšių. Dėl tvirtos konstrukcijos, didelio smagračio sukimo momento ir specialios žiotelės geometrijos užtikrinamas efektyvus ir vienodas smulkinimas. Pažangi hidraulinė reguliavimo sistema leidžia lengvai nustatyti reikiamą produkcijos išėjimo dydį ir sumažina operatoriaus įsikišimo poreikį. CONSTMACH žiotelės trupintuvai užtikrina ilgalaikį naudojimą dėl kalto chromo-nikelio plieno trupinimo svirties, stiprių guolių ir automatinės tepimo sistemos. Suvirintas pagrindinis rėmas, kuriam atlikta terminio įtempimo atleidimo procedūra, išlaiko maksimalų patvarumą net esant didelėms vibracijoms. Ergonomiškas techninės priežiūros dizainas užtikrina nepertraukiamą ir saugią darbo aplinką viso gamybos proceso metu. Įrenginiai gali būti integruoti į stacionarias arba mobilias smulkinimo gamyklas, todėl yra itin lankstūs įvairiems projektams. CJC-60 techninė specifikacija: Žiotelės dydis: 600 x 380 mm Variklio galia: 30 kW Veleno greitis: 330 aps./min. Masė: 6 000 kg Min./maks. reguliavimas: 30–100 mm Našumas: 60–110 t/val. CJC-90 techninė specifikacija: Žiotelės dydis: 900 x 650 mm Variklio galia: 75 kW Veleno greitis: 277 aps./min. Masė: 11 400 kg Min./maks. reguliavimas: 50–150 mm Našumas: 90–270 t/val. CJC-110 techninė specifikacija: Žiotelės dydis: 1100 x 850 mm Variklio galia: 132 kW Veleno greitis: 230 aps./min. Masė: 33 000 kg Min./maks. nustatymas: 60–200 mm Našumas: 150–420 t/val. CJC-130 techninė specifikacija: Iodpfsxpkgdsx Abvstg Žiotelės dydis: 1300 x 1000 mm Variklio galia: 160 kW Veleno greitis: 220 aps./min. Masė: 42 500 kg Min./maks. reguliavimas: 100–280 mm Našumas: 275–790 t/val. CJC-140 techninė specifikacija: Žiotelės dydis: 1400 x 1100 mm Variklio galia: 200 kW Veleno greitis: 220 aps./min. Masė: 52 000 kg Min./maks. reguliavimas: 120–280 mm Našumas: 420–850 t/val. Kodėl verta rinktis CONSTMACH žiotelės trupintuvus? CONSTMACH yra kokybės ir patikimumo simbolis smulkinimo ir rūšiavimo technologijų srityje. Kiekvienas žiotelės trupintuvo modelis gaminamas pagal tarptautinius standartus, užtikrinant maksimalų efektyvumą, žemas eksploatacines sąnaudas ir ilgą tarnavimo laiką. Lankstūs dizaino sprendimai pagal kliento poreikius ir platus aptarnavimo tinklas padeda užtikrinti nepertraukiamą jūsų verslo darbą. Patikima veikla, inžinerijos kokybė ir profesionalus techninis aptarnavimas po pardavimo – CONSTMACH yra patikimas pasirinkimas jūsų smulkinimo sistemoms. Ką mes darome Constmach? Constmach yra lyderiaujantis mašinų gamintojas, aptarnaujantis statybos ir kasybos sektorius, siūlantis platų gaminių asortimentą. Mūsų portfelyje yra betono blokelių gamybos mašinos, stacionarios ir mobilios betono gamyklos, akmens smulkinimo įrenginiai, akmens smulkinimo ir rūšiavimo linijos, smėlio plovimo įranga, smėlio gamybos mašinos, asfalto gamyklos, konvejerių sistemos, žiotelės trupintuvai ir mobilios smulkinimo plantacijos. Aukšti kokybės standartai, inovatyvus gamybos požiūris ir orientacija į klientą užtikrina Constmach prekės ženklo patikimumą tiek nacionalinėje, tiek tarptautinėse rinkose. Dėl patvarumo, efektyvumo ir ilgo tarnavimo mūsų įrengimai yra dažnas profesionalų pasirinkimas.

Būklė: labai geros būklės (naudotas), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Itodpfx Aox Hglysbvjg Maximum test specimen weight: 20 kg Test chamber volume: 60 liters Test chamber dimensions: width 380 mm, depth 430 mm, height 370 mm External dimensions: width 875 mm, depth 1970 mm, height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via transfer carriage) Hot chamber temperature range: +50 °C to +220 °C (calibration value +125 °C) Cold chamber temperature range: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply of the test item SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerant: R-404A R-23 Weight: approx. 800 kg Important safety information for you as the buyer! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change and error!) Please feel free to contact us by phone for further questions.

Būklė: paruoštas naudoti (naudotas), Jūs siūlote Heidenhain keitiklį UV 105, 344 980-13, serijos numeris: 13442060, keitimo būdu (Exchange service), profesionaliai pilnai renovuotą ir patikrintą, su 3 mėnesių garantija, 100% veikiantį, komplektacija pagal nuotraukas. Dėmesio: Iedox Etk Hspfx Abvstg Keitimo procedūros metu jūsų sugedęs keičiamas komponentas neturi turėti mechaninių pažeidimų, pavyzdžiui, lūžių, nes šie nebėra taisomi. Tuo atveju bus išrašyta papildoma sąskaita 400 € su PVM.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, Weishaupt L3Z/A alyvos degiklis Modelis: D Galia: 65 kg/val. Pagaminimo metai: 1995 Apžiūra tik iš anksto suderinus telefonu! Pageidautinas pardavimas prekybininkams, įmonėms arba eksportui. Visa pateikta informacija be garantijos, galimos klaidos ir tarpinis pardavimas. Pardavėjas neatsako už rašybos ar duomenų perdavimo klaidas. Visas formalias procedūras sutvarkysime mes. Pakrovimas galimas. Itedjig Txbjpfx Abvsg

Būklė: geras (naudotas), Vötsch Type: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-cooled Performance Data: With a temperature change rate of 10 K/min Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1000 mm, Depth 2480 mm Temperature range: -70°C to +180°C Temperature deviation over time: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test volume: 480 liters Left side 1x lateral port ∅ 125 mm Left side 1x lateral port ∅ 50 mm Right side 1x lateral port ∅ 125 mm Chamber is water-cooled Test room lighting: Halogen bulb 24 V, 50 W Electrical connection: Itjdpexzgn Isfx Abvjg Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1250 kg For your safety as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (see image) (Technical specifications subject to change and error!) We are happy to answer any further questions you may have by phone.

Būklė: naujas, POSEIDON-1000 valymo staklės sukurtos diagnozuoti, plauti ir džiovinti įvairių konstrukcijų DPF filtrus bei katalizatorius, atitinkančius EURO 5 ir EURO 6 standartus. Isdpspbv Hgofx Abvetg Ši įranga užtikrina švelnų, bet efektyvų filtrų plovimą, pasiekiant puikių rezultatų nepažeidžiant brangių komponentų. Staklių veikimas pagrįstas hidroimpulsu ir turbulentinio skysčio judėjimu, naudojant specialias plovimo priemones ir temperatūrinius režimus efektyviam valymui. Po valymo atkuriamos 97% filtro darbinės savybės. PAGRINDINĖS SAVYBĖS - Filtro testavimas prieš plovimą – užsikišimo laipsnio įvertinimui; ir po plovimo – valymo kokybės patikrinimui. - Automatizuotas plovimo ciklas su galimybe užprogramuoti visus darbo režimus. Filtro valymas atliekamas hidrodinamiškai, veikia hidraulinės ir pneumatinės sistemos, generuojančios hidraulinius impulsus teršalams pašalinti. - Pagreitintas filtro džiovinimas galingu karšto oro ventiliatoriumi, kas visiškai pašalina likusią drėgmę iš gaminio. >> Visa valymo procedūra atliekama per trumpą laiką, >> o klientui grąžinamas švarus ir sausas filtras, paruoštas naudojimui transporto priemonėje. VERSLO PERSPEKTYVOS SU POSEIDON-1000 • Įranga ir technologija leidžia kokybiškai valyti visų rūšių ir gamintojų DPF filtrus. • Tarp užsienio analogų – funkcionaliausias stendas, užtikrinantis didelį našumą. • Automatizuotas filtro valymo ir džiovinimo valdymas leidžia stendu naudotis vienam operatoriui. • Minimalios išlaidos ir laikas reikalingi savo DPF filtrų valymo serviso atidarymui su šiuo įrenginiu. • Greita įrangos atsipirkimo trukmė automobilių mazgų remonto tarnybose. JŪSŲ PRIVALUMAI + Automatizuotas DPF filtro valymo procesas su galimybe programuoti visus mašinos darbo režimus – galite savarankiškai reguliuoti plovimo procesą arba naudotis gamintojo nustatytais rėžimais. + Pilna filtro valymo ir džiovinimo proceso kontrolė, nes standartinėje programoje realiu laiku atvaizduojamos oro ar vandens slėgio kreivės. + Diagnostikos funkcija su galimybe spausdinti ataskaitas: prieš valymą (užterštumo lygiui nustatyti) ir po valymo (valymo kokybės patikrinimui). + Visos darbines staklių plokštumos ir korpusas pagaminti iš nerūdijančio plieno lakštų – nerūdija ir nėra paveiktos korozijos. + Hermetinė kamera ne tik apsaugo nuo techninių skysčių išsiliejimo, bet ir sumažina triukšmo lygį iki saugių ribų, todėl darbas tampa patogesnis ir saugesnis. + Greitam DPF filtro montavimui skirta atskira pneumatinė sistema su universaliu greito jungimo adapteriu. + Universalus įrankis leidžia pritvirtinti bet kurį DPF filtrą, nepriklausomai nuo transporto priemonės tipo. + Skysčių filtravimo ciklas uždaras, naudojami stambūs ir smulkūs filtrai, aprūpinti manometrais užterštumo lygiui stebėti. + Racionaliai parinkta vandens bakelio talpa užtikrina trumpą skysčio įšilimo laiką ir ilgą darbo laiką tarp skysčių keitimų. Kreipkitės į mus – pateiksime geriausią pasiūlymą!

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 12 893 h, keliamoji galia: 2 000 kg, kėlimo aukštis: 4 100 mm, stiebo tipas: triplex, statybinis aukštis: 2 150 mm, baterijos talpa: 700 Ah, akumuliatoriaus įtampa: 48 V, šakių ilgis: 1 600 mm, spalva: raudona, Įranga: apšvietimas, galvos apsauga, kabina, priekabos jungtis, šoninis poslinkis, Linde E20PH 2t Triplex 4-Wheel Electric Forklift from year 2016 with a lifting capacity of 2,000 kg. The mast is a triplex mast with full free lift, offering a lifting height of 4,600 mm. Equipped with a sideshift and fork positioner from Durwen. Hydraulics are leak-free, maintenance service completed! All work has been carried out by an authorized dealer! Battery serviced. Battery tested using the C5 procedure by a specialist. Technical Data: Manufacturer: Linde Model: E20PH Year: 2016 Load capacity: 2,000 kg Operating hours: 12,893 Overall height: 2,150 mm Fork length: 1,600 mm (shorter forks available upon request) Lift height: 4,600 mm Mast: Triplex with full free lift Cab: Protective roof Battery: 48V 700Ah from year 2020 with 70% remaining capacity Grammer seat with seat heating 12V 120W connection for terminal / power supply Non-marking, light-colored tires in very good condition Isdpjwp R Uwofx Abvotg ZH 1 + 2 (additional hydraulics 1 + 2) Fork positioner with sideshift by Durwen installed Charger included Work lights front and rear BlueSpot rear Rotating beacon Forklift in very good condition, UVV inspection can be provided upon request. Transport possible VAT deductible Net export possible with a valid VAT number within the EU or for export to a third country.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, veikimo valandos: 11 449 h, keliamoji galia: 1 800 kg, kėlimo aukštis: 3 150 mm, apkrovos centras: 500 mm, kuro tipas: elektrinis, stiebo tipas: dupleksas, statybinis aukštis: 2 050 mm, šakių ilgis: 1 200 mm, tuščias svoris: 3 100 kg, spalva: raudona, Įranga: apšvietimas, kabina, padėklų šakės, papildomi žibintai, priekabos jungtis, šoninis poslinkis, Linde E18 Duplex Electric forklift from year 2018 with a load capacity of 1800kg. The forklift has a duplex mast with full free lift and a lifting height of 3150mm. The truck is equipped with a sideshift device. Road lighting to German regulations (StVo)! Double pedal controls. Hydraulic system is leak-free, maintenance has been carried out! All service work was performed by an authorized dealer! Battery serviced. Battery tested by professional service using the C5 procedure—86% capacity (C5 test). Technical Data: Manufacturer: Linde Model: E18 Year of manufacture: 2018 Load capacity: 1800kg Operating hours: 11,449 Overall height: 2050mm Fork length: 1600mm (Standard forks can be exchanged for 1200mm or 1000mm forks on request) Lift height: 3150mm Mast: Duplex mast with full free lift Sideshift Double pedal control Charger included Itsdpfx Abswp Sb Sjvog Battery 48V, tested at 86% residual capacity (C5 tested) Grammer seat Seat heating Road lighting (StVo) Hydraulic system leak-free Work lights front and rear Tyres in very good condition Forklift in very good condition, UVV inspection possible on request. Transport can be arranged. VAT deductible Net export possible either with a valid EU VAT ID or for export outside the EU.

Būklė: naujas, Our SAPI pressure blasting unit type "Mammut" with a 60-litre tank capacity is suitable for all common blasting media. The blasting pressure can be infinitely adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit also features a permanently mounted water separator, which extracts moisture from the compressed air and thus prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety shut-off system is included. This allows starting and stopping of the blasting process via an operating lever mounted on the blasting hose. Delivery includes: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off system Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed 1" piping, internal and external - Rubber-coated metal cone with rubber seal - Generously sized hand hole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 l - Overall height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm Ijdpfx Ajwc Afhebvotg - Weight: approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT WITH SAFETY SHUT-OFF: - Extremely fast switching on and off times, complying with industrial safety regulations (VBG 48) - Pressure setting can be fine-tuned accurately prior to blasting, infinitely adjustable from 0.1 – 12.0 bar - Lower blasting media consumption, as the pressure vessel remains constantly pressurized and thus no unnecessary media run-on occurs - Upon restarting, full blasting pressure is immediately available at the nozzle, eliminating delay; this results in significantly lower media consumption and reduced wear on the blasting hose - No moisture formation (condensate) in the vessel, as it remains continuously pressurized, avoiding ventilation during each start and stop; this procedure offers additional benefits: - Optimal blasting media dosing with hardened fine adjustment valve - Reduced compressed air demand, significantly lowering fuel (diesel) consumption - Single-person operation, as the vessel pressure is continuously displayed and can be conveniently adjusted via the pressure gauge without prior startup - No failure-prone components such as control valves, membranes, or seals, resulting in high operational reliability and low maintenance. Only the hose in the safety shut-off needs to be inspected and replaced if necessary.

Gamybos metai: 2023, būklė: naujas, - Modern ergonomic design - Manual testing sequence with analog gauge (reading accuracy 0.2 HR units) - Easy operation and rapid testing procedure - Test space height approx. 185 mm Isdpfx Ajpbbc Hsbvetg - Test space depth approx. 160 mm - Dimensions 545 x 182 x 755 mm Test load ranges: 60 / 100 / 150 kg Test methods: HRA / HRB / HRC Standard scope of delivery: - Hardness tester - V-block support - Flat test table Ø150 mm - Flat test table Ø50 mm - 1/16" ball holder with ball - 120° Rockwell diamond indenter - Spindle guard - Accessory case

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Predstavljamo revolucionarnu mašinu za proizvodnju bureka koja unapređuje proizvodnju uz automatske uređaje za burek, pekarsku opremu, industrijsku tehnologiju bureka, mašine za burek i pekarske alate—obezbeđujući savršeno pečen burek u svakom ciklusu. Evoluciona mašina – Linija za proizvodnju bureka! Prednosti linije ili mašine za burek: Automatizacija procesa: Smanjuje potrebu za ručnim radom, povećava efikasnost i brzinu proizvodnje. Dosledan kvalitet: Osigurava da je svaki burek ravnomerno pečen i pravilno napunjen, pružajući izuzetan ukus. Smanjenje otpada: Precizna doziranja i automatizacija minimizuju otpad materijala. Higijena: Laka za čišćenje i održavanje, garantuje najviše higijenske standarde. Povećan kapacitet: Omogućava proizvodnju većih količina bureka za kraće vreme. Višenamenska: Sposobna za proizvodnju raznih vrsta bureka sa širokom paletom nadeva. Ekonomičnost: Smanjuje troškove proizvodnje tokom vremena i povećava profitabilnost. Ponosno predstavljamo najnovije dostignuće u svetu gastronomije – mašinu za burek koja će vašu proizvodnju podići na potpuno novi nivo! Ova inovativna mašina transformisaće način na koji pripremate i servirate tradicionalni burek. Sa intuitivnim dizajnom i naprednim funkcijama, naša mašina za burek stvorena je da pojednostavi proces proizvodnje, uz očuvanje vrhunskog kvaliteta i ukusa u svakom zalogaju. Jednostavno postavite testo i nadev po izboru, a mašina će uraditi ostalo. Zahvaljujući preciznoj tehnologiji i podešavanjima, svaki burek biće ravnomerno pečen, hrskav spolja, a sočan i ukusan iznutra. Rezultat je apsolutno savršenstvo u svakom zalogaju. Naša mašina za burek izuzetno je higijenska i jednostavna za održavanje. Kvalitetni materijali garantuju dugovečnost i pouzdanost uređaja, dok laka procedura čišćenja omogućava brzu pripremu za narednu turu ukusnog bureka. Ne gubite vreme i energiju na ručnu proizvodnju bureka. Unapredite svoj proizvodni proces našom mašinom i zadovoljite ukuse svih vaših zadovoljnih kupaca. Oslobodite se teškog fizičkog rada i uživajte u kreiranju savršenog bureka uz našu revolucionarnu mašinu. Neka vaša pekara postane epicentar ukusa i kvaliteta sa mašinom za burek koja postavlja nove standarde u industriji. Iskoristite ovu neverovatnu tehnologiju i ostvarite svoje kulinarske snove. Tehničke karakteristike: Snaga: 3 + 6 kW (3 kW za liniju, 6 kW za grejače za topljenje masti) Dužina linije: 4,8 metara Isdpjwhcz Tefx Abvstg Kapacitet proizvodnje: Podesiva brzina omogućava učinak od 40 do 120 kg/h Kontrolna jedinica sa touch panelom: Moguće programiranje do 100 recepata Namena: Idealna za pite, složeni burek i savijače Dodatni opcion unit za nadeve i prelive: 5.000 € Mašina je projektovana isključivo za evropsko tržište.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, IN-STOCK MACHINE: Working direction from left to right - Subject to prior sale - HECHT Exenso Profi Saw Cutting Center ESA-9 Comprising: Infeed: - Robust aluminum construction in proven profile design - Ergonomically adjustable working height from 985 to 1055 mm - Raw bar length from min. 400 mm to max. 6,000 mm (optional extension kit up to 6,500 mm available) - Material feed via chain conveyor for automatic allocation of 9 compartments - Working direction from left to right Professional Cut-Off Saw: - Bandsaw automatic system with pneumatic clamping system consisting of 3 clamping elements - Continuously adjustable feed rate via hydraulic unit - Workflow controlled via Exenso control system - The sawing area is safeguarded from the front by a light curtain - Saw blade drive: 1.5 kW, frequency-controlled - Saw blade dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in standard operation 15-110 m/min - Cutting range: width 10-120 mm, height 10-80 mm Outfeed: - Robust aluminum construction in proven profile design - Ergonomic removal height from 760 to 820 mm (Note: not independently adjustable from working height) - Part outfeed via powered roller conveyor with steel roller design - Roller-guided ejection unit over three levels onto an inclined removal table - Maximum part length via automatic outfeed: 3,500 mm (optionally available extension kit for up to 4,500 mm working length) - Waste disposal via ejector unit – max. length 600 mm - Waste falls via chute into customer-provided waste container (Note: waste container not included) - Remnant identification marked at storage position for manual placement by the operator Software / Data Interface: - HECHT Software Exenso ESA (version specified after joint acceptance) Operating Procedure: - Reinforcement bars are placed by the operator according to specifications/display onto the loading magazine in the infeed - Data transmission via integrated data interface from customer-side window construction software for the required lengths of the PVC cutting center - Steel is automatically loaded and fed in - Optimized cutting to specified length - Transfer of steel to removal position in the outfeed - Optional double-cutting possible after inspection Scope of Delivery: - Bandsaw - Infeed - Outfeed - Light curtain - Control unit with Win 10 and 15" touch screen - Data interface REST API can be adapted to an existing cutting center after inspection - The unit is dismantled into several packages for transport Iodpsxft I Aefx Abvstg Includes: 540.1082 1 pc. safety fence wall connection set with door switch ESA/SSA, usable right and left 723.5011 1 pc. saw blade M42 3320x27x0.9 12-16 TPI, fine 942.5541 1 pc. minimum quantity lubrication for ESA & SSA saw systems, noticeably increases saw blade service life Includes: minimum quantity lubrication nozzle, 1 l lubricant, lubricant holder, filter for protection against contamination 829.0201 1 pc. buffer monitor for ESA/SSA steel terminal, additional display

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, matavimo diapazonas X ašis: 2 500 mm, matavimo diapazonas Y ašis: 100 mm, matavimo diapazonas Z ašis: 65 mm, Stock machine - Subject to prior sale! Tactile 3-axis measuring table for quick and precise measurement of flat workpieces Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Operation | Control | Operating system: 15" touchscreen | HECHT DesQ II software | Windows Measuring range: X = 2,500 mm / Y = 1,000 mm / Z = 65 mm Accuracy: Absolute accuracy X/Y +/- 0.10 mm Typical repeatability X/Y +/- 0.02 mm Relative accuracy Z +/- 0.05 mm Typical repeatability Z +/- 0.02 mm Resolution: 0.01 mm Measurements: ⦁ Length, width, thickness (relative) ⦁ X/Y distances ⦁ Squareness ⦁ Parallelism ⦁ Borehole position X/Y ⦁ Bore diameter ⦁ Bore depth (relative) ⦁ Radii / diameters ⦁ Groove position ⦁ Groove depth (relative) ⦁ Rabbet position ⦁ Rabbet depth (relative) ⦁ X/Y/Z position of horizontal bores ⦁ Depth of horizontal bores (relative) Measuring program: 8-point measurement for 4-sided parts (e.g. rectangle, parallelogram or trapezoid) Procedure: 8 points of the workpiece are probed (two points each on the straight sides at the corners) Result: Display of 2 x length (top, bottom), 2 x width (right, left), 4 x angles Protocol: When target and tolerance values are entered, a target-actual comparison with deviations is generated and displayed in tabular form. Storage of measurement results as PDF (protocol) or in a SQL database for statistical analysis. Inspection and documentation of the manufacturing status during production, after cutting, after edge banding or after drilling operations on the workpieces, depending on the production stage. Vacuum system (Venturi principle) 6 vacuum cups integrated into the measuring area secure the workpiece during the measuring process. Technical data: Dimensions (L x W x H): approx. 2,950 mm x 1,050 mm x 2,090 mm Weight: approx. 450 kg Power connection: 230 V Compressed air connection: 6 bar Air consumption: 90 l/min Operation/control: 15" touchscreen Itsdpfxjw Ew Dqj Abveg HECHT DesQ II software Windows 10

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Tensile / Universal Testing Machine, 200 kN test force, excellent WINDOWS software (freely programmable test procedures), over 600 pre-configured test results. GALDABINI: >30,000 machines delivered worldwide / Germany >1,000 Itsdpfocyamwjx Abveg Important note before purchasing used universal / tensile testing machines: WIN XP / WIN 7 are 'obsolete', these machines—often purchased at high cost—must be modernized (electronics, software for WIN10/11, DC disc armature motor + motor controller). The total cost for purchase, transport, retrofit, commissioning, and refurbishing can turn into an expensive dead end. And one year later, the gearbox—which is no longer available—fails (... ?). New GALDABINI Universal Testing Machines with 2-year warranty, BECKHOFF electronics, premium testing software are often more cost-effective, comply with ALL standards, and are universally suitable for: * Tensile tests, compression tests, bending tests, cyclic tests * Brushless AC motor, digital motor controller, BOSCH-REXROTH ball screws * Force transducers with error margin 0.5% at 1/100 | 1% at 1/500 * Etc. Machine price EXCLUDES clamping fixtures—these must be selected according to your specific testing requirements. Included in the price: - Fully functional machine with 2-year warranty - Force accuracy: 2 to 200 kN

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Tensile / Universal Testing Machine, test force 100 kN, outstanding WINDOWS software (freely programmable test procedures), over 600 predefined test results. GALDABINI: more than 30,000 machines delivered worldwide / over 1,000 in Germany Important notice before purchasing used universal / tensile testing machines: WIN XP / WIN 7 are ‘obsolete’, these expensive machines ‘must’ be upgraded (electronics, software for WIN10/11, DC disc rotor motor + motor controller). The total cost for purchase, transport, retrofit, commissioning, and post-purchase corrections can quickly turn into an expensive dead-end. And a year later, the gearbox—which is no longer available—fails (... ?). New GALDABINI universal testing machine with 2-year warranty, BECKHOFF electronics / premium test software are often cheaper, comply with ALL standards, and are ideally suited for: * Tensile tests, compression tests, bending tests, cyclic tests * Brushless AC motor, digital motor controller, BOSCH-REXROTH ball screws * Load cells with accuracy: 1/100 error 0.5% | 1/500 error 1% * etc. Machine price WITHOUT clamping fixture - must be selected specifically for your testing application. Included in the price: Itodpfx Abjcxwq Rsvsg - Machine fully functional with 2-year warranty - Force accuracy: 1 to 100 kN