Paternoster pirkti naudotą (191)

Sąlyga: naujas, Gamybos metai: 2026, TOP Carousel Storage System for 3D Foil Rolls Our film carousel storage systems are suitable for storing all types of foil rolls. They can be used as a high-bay storage solution directly at the membrane press or as a space-saving 3D foil stock. Hedjff Huwspfx Af Ieng With our carousels, a large number of foil rolls can be stored in the smallest space (approx. 2.4m x 1.2m), accommodating up to 32 rolls with a diameter of 300mm. The required film is immediately accessible at the push of a button. Our standard carousels are available in heights from 2.8 meters up to 6.0 meters. Custom solutions are also available upon request. Please contact us – together we will find the right storage solution for your needs. As optional additional equipment, we offer centering sleeves, manual or automatic cutting devices, and ionization solutions. • Hanging bars with diameters from 42.4mm up to max. 76mm • Side cladding over the entire construction height • Protective grid from 2.2m above floor level up to the top edge of the carousel • Load chain as hollow pin chain, breaking strength 100 kN, pitch 50mm = support rod hanger spacing. Circulation speed approx. 5.5 m/min • Operation via key-operated switch with return (dead man’s control) for up/down movement • Rated voltage 400 V; 3N; 50 Hz, power supply cable with CEKON plug 16A, site-side fuse protection 10A time-delay • Attention!!! Installation requires a stable, level, and solid floor (no floating screed). Minimum floor load capacity must be 2.4kg/cm²

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2004, veikimo valandos: 30 629 h, lazerio galia: 4 000 W, X ašies eiga: 3 070 mm, Y ašies eiga: 1 550 mm, Z ašies eigos atstumas: 200 mm, produkto aukštis (maks.): 20 mm, Laser cutting machine including stack storage system (paternoster)! The machine was serviced by the manufacturer in 2023! LASER CUTTING MACHINE TECHNICAL DETAILS Laser Laser power: 4,000 W Peak power: 500 W Laser source: FANUC AF 4000 E Technology: c2-laser (AC-HF) Laser wavelength: 10.6 µm Laser stability: +/- 1% Laser consumption: approx. 10 l/h Working area and cutting parameters X-axis travel: 3,070 mm Y-axis travel: 1,550 mm Z-axis travel: 200 mm Table load capacity: 850 kg Material thickness (mild steel ST 1203): 20 mm Cutting speed: 0 to 20 m/min X-axis traversing speed: 80 m/min Y-axis traversing speed: 80 m/min Simultaneous axis speed: 113 m/min Z-axis traversing speed: 60 m/min Control: GE Fanuc Series 160 I-LW MACHINE DETAILS Operating hours: 30,629 h Dimensions & Weight Dimensions: 8,000 x 3,400 x 2,400 mm Weight: 16,000 kg EQUIPMENT Documentation/manual Chiller unit Safety light barrier Dry separator Keller L-CUT Transformer RIEDEL PC 315.21-ME LAS STACK STORAGE SYSTEM TECHNICAL DETAILS Maximum sheet weight: 3,000 kg Sheet thickness: 1 to 20 mm Maximum sheet size: 3,000 x 1,500 mm Minimum sheet size: 150 x 150 mm Lifting beam load capacity: 3,000 kg MACHINE DETAILS Hnsdpfsxc E Dqsx Af Ieg Dimensions & Weight Dimensions: approx. 6,400 x 5,000 x 8,000 mm Weight: approx. 8,000 kg EQUIPMENT Loading bay Unloading level Lifting beam Pallet changer Vacuum lifter

Gamybos metai: 1996, Sąlyga: geras (naudotas), For sale, we offer a used Kardex vertical carousel (paternoster). Technical specifications: Length: 3,400 mm Width including tray: 1,960 mm Width without tray: 1,650 mm Height: 6,200 mm Hsdpfx Afskuyk Ae Iong Trays: Length: 2,950 mm Width: 620 mm Height: 110 mm If you are interested, please contact us.

Sąlyga: labai geros būklės (naudotas), Greita paternosterio tipo krovimo įranga padėklų lentoms. Su lentų žurnalu. Su paketų išvadu. Jau išardyta. Daugiau informacijos pagal užklausą. Pardavimas pagal kliento užsakymą. Hedpsxz R Ufsfx Af Iong

Sąlyga: dilaminuotas dirbtuvėje (naudotas), modernized machine with new LTG-StoreControl P control system External dimensions: Installation height: 6,010 mm Installation width: 3,501 mm Installation depth: 1,774 mm 25 carriers, each with a load capacity of 628 kg with the following usable clear internal dimensions: Height = 359 mm Width = 2,880 mm Depth = 628 mm Chain pitch: 406 mm Deposit table at 1,000 mm above finished floor level, fitted with worktop / plastic surface Color: light grey, surface cleaned, signs of use possible Drive motor power: 1 x 5.5 kW / 400 Volt Further features: automatic chain tensioning, various intermediate shelves, subject to errors and technical modifications Delivery and installation currently mainly in Germany, Austria, and several neighboring countries Hnodpfx Afehfxkao Isg

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Dėl veiklos nutraukimo Norderstedt padalinyje, parduodama iš vietos, neiškrauta. Kugler Paternoster štampavimo mašina, tinkama Wire-O ir indeksams Formatas 50 x 50 cm Įskaitant 2 štampavimo įrankius Paskutinis kainos sumažinimas!!! Hedpsrn R Rfjfx Af Ijng

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 01-003191/001, bendras ilgis: 3 000 mm, bendras plotis: 2 200 mm, bendras aukštis: 8 000 mm, bendras svoris: 18 000 kg, keliamoji galia: 22 000 kg, SSI SCHÄFER SHUTTLE-250-1850 x 863-NT paternosteris su turiniu - Maksimali leistina bendroji naudingumo apkrova: 22 000 kg - Darbinė įtampa: 400 V - Nominali srovė: 3 x 8,0 A - Dažnis: 50/60 Hz - Pajungimas: 4,5 kVA - Leistina lentynos apkrova tolygiai paskirsčius apkrovą: 270 kg - Lentynos matmenys: 1850 x 863 mm - Turinys sudarytas iš įvairių įrankių, tokių kaip terkšlės, spaustuvai, sriegikliai, pneumatinės detalės, įvairūs elektriniai prietaisai, įvairūs hidrauliniai priedai, šlifavimo mašinų priedai, šlifavimo diskai, varžtai, spyruoklės, žarnos, elektros priedai, tvirtinimo priemonės, pjūklo diskai, suvirinimo ir pjovimo priedai, diržai, plaktukai, replės, šešiakampiai raktai, kaltai ir kita įrankių įranga. Hsdpfx Afox Tzm Eo Iong Dėmesio: prekė turi būti privalomai atsiimta laikotarpiu nuo 2026-02-18 iki 2026-02-26 konkrečią, papildomai derinamą dieną. FCA D-78087 Mönchweiler – pakrauta į sunkvežimį

Gamybos metai: 2017, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, For sale is a Paternoster oven from the brand Eliog, model PNO 80. This oven is a custom-made unit. Open oven for preheating components, paternoster handling system, and control panel included. Also suitable for food and cannabis drying/dehydration. The system was installed in 2017 and has only been operated occasionally since approx. 2022. Hnodpfxeup R U Us Af Iog The unit has already been dismantled. Technical data: Year of manufacture: 2017 Max. workpiece carrier surface: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C, the safety temperature limiter for the usable space shuts down!) Set throughput time: approx. 240 min Max. air flow velocity: approx. 4 m/s Heating power: 72 kW Nominal voltage: 3×400 V, 50 Hz Supply air: ambient air at the oven Exhaust air: max. 850 m³/h Usable space dimensions: 4780×2200×2250 mm Workpiece carriers: 56 pieces (capacity inside the oven) Max. workpiece weight: 0.3 kg Transport height above floor level: 400 mm Heating: 3 kW per heating element, 6 heating elements per control zone — 4 zones (total 72 kW output) Dimensions: approx. 4,425×5,425×4,980 mm Space required: 5,012.4×3,919.5×5,000 mm Oven weight: approx. 7,500 kg Control panel: approx. 450 kg (Images have been edited for copyright reasons) Transport and loading can be organised for an additional charge, Europe-wide. Prices excl. VAT. Viewing possible by appointment. Please contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase/Sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet cost-effective metalworking machine for your production? Or would you like to sell yours? For further information or ways to contact us, please visit our website.

Sąlyga: naujas, Gamybos metai: 2026, Custom-built paternoster stacking systems available in various technical designs for sawn timber lengths from 3.0 to 6.0 m (other lengths on request) Hjdpsr Nx Tmjfx Af Isng Options: • With or without lath bundling (various versions available, depending on requirements) • With or without lath magazine; single or double chamber options, depending on requirements, equipped with pneumatic gripper • Infeed and outfeed solutions tailored to customer specifications

Sąlyga: geras (naudotas), Stacking containers, stacking boxes, plastic containers, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, small load carriers, open front storage bins, shelf bins - 6,620x open front storage bins: various sizes - 771x open front storage bins, dimensions: 550/174/H110 mm Hodpfodqc Hwjx Af Ieng - 3,483x open front storage bins, dimensions: 175/135/H110 mm - 2,112x open front storage bins, dimensions: 275/175/H110 mm - 30x open front storage bins, dimensions: 138/86/H110 mm - 172x open front storage bins, dimensions: 174/136/H96 mm - 56x open front storage bins, dimensions: 274/174/H96 mm - Sale: only as a complete lot

Sąlyga: dilaminuotas dirbtuvėje (naudotas), modernized machine with new LTG-StoreControl P control system External dimensions: overall height: 5860 mm overall width: 2940 mm overall depth: 1180 mm 25 carriers, each with a load capacity of 165 kg with clear usable dimensions: Height = 380 mm Width = 2500 mm Depth = 410 mm Chain pitch: 412 mm Total load capacity up to 4110 kg Deposit table at 1000 mm above finished floor level (FFL) with rubberized worktop Color scheme: GREY/BROWN, surfaces cleaned, signs of use possible Drive motor power: 1 x 1.8 kW / 400 Volt Base machine of this modernization: SYS 180 by Kardex Hedpjdnzg Nsfx Af Iong Subject to errors, technical modifications, and deviations from the photos delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1991, Siūloma ESKA riedėjimo paternosterio tipo sandėliavimo ir pakrovimo sistema. Volelių plotis: 1600 mm, maksimali apkrova: 2800 kg, bendras aukštis: 4300 mm. Yra dokumentacija. Galima apžiūra vietoje. Hsdpfx Asw I E Dcof Isng

Sąlyga: geras (naudotas), In the field of 3D thermoforming, on Machineseeker we also offer presses, turners, brushing machines, and membranes! Paternoster For the membrane press FILM STORAGE PATERNOSTER for film rolls in storage and at the press Technical details: - Installation height: 3,800 mm - Maximum film width: 1,600 mm - Maximum roll diameter: 500 mm - Maximum film weight: 340 kg - Number of support bars: 12 - Space requirement: 1,000 x 2,370 x 3,800 mm - Including film transport trolley - Drive power: 1.5 kW - Total loading capacity: 4,080 kg with a maximum roll weight of 340 kg - Device weight incl. load: 5,240 kg - Floor load (t/m²): 1.89 - Core inner diameter max.: 90 mm, support bar diameter: 42.4 mm - Side cladding over the entire installation height - Protective grid from 2.2 m above floor level up to top edge - Load chain as hollow pin chain, breaking strength 100 kN, pitch 50 mm = support bar suspension grid - Circulating speed approx. 5.5 m/min - Operation via key switch with return (dead man's switch) for up/down - Rated voltage: 400 V; 3N; 50 Hz, mains connection cable with CEE 16A plug - Mains protection (on site): 10A slow-blow Description: The film roll storage paternoster is used for storing film rolls, for example: * Directly at the membrane press, where a large quantity of film rolls can be stored on a minimal footprint. The roll currently needed for pressing is available at the push of a button. Hnsdpfx Afebgdv Ij Iog * As pre-storage for all film rolls. Here, a large number of rolls can be stored on a small area and are always easily accessible. Optional features: * Manual or automatic cutting device available * Ionisation * Other installation heights from 2,800 mm up to 6,000 mm high paternosters * Additional suspension bars * Additional transport trolleys for rolls Price on request

Sąlyga: geras (naudotas), Gamybos metai: 1990, Kardex Vertical Carousel Model: Kardex Serial number: illegible Year of manufacture: 1990 Machine height: approx. 5920 mm Machine width: approx. 3010 mm Machine depth: approx. 1250 mm + 300 mm worktop Number of trays: 40 Tray width: approx. 2500 mm Tray depth: approx. 400 mm Tray height: approx. 235 mm Shelf load capacity: 250 kg Hedjw E Hh Ejpfx Af Iong Total load capacity: 10,000 kg Colour: White

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger-jointing press, foldable - Drying paternoster approx. 7 m, for board lengths up to 6 m - Cut-off and zero saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine not for sale - Package cross conveyor The machine is in very good condition, with very few operating hours. Machine is still assembled, but available immediately. Hnjdpowclkyjfx Af Isg

Sąlyga: geras (naudotas), Gamybos metai: 2014, Manufacturer: Hänel Model: Lean Lift Year: 2014 Hjdpfx Afevt Euzo Ieng Machine Dimensions: Height: approx. 6302 mm Width: 2805 mm Depth: 2810 mm Shelf Units: 40 pieces, up to 400 kg per container Shelf height: 57 mm Shelf depth: 825 mm Shelf width: 2460 mm Total load capacity: 40,000 kg (2 × 20,000 kg)

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Modernized machine with new control system LTG-StoreControl P 2 identical machines available External dimensions: Overall height: 4340 mm Overall width: 3270 mm Overall depth: 1680 mm 26 carriers, each with a load capacity of 250 kg Usable inner dimensions: Height = 215 mm Width = 2730 mm Depth = 620 mm Chain pitch: 254 mm Intermediate shelves are available for 0 load supports, with 120 kg load capacity per usable level Intermediate shelves can be manufactured on request Deposit table at 900 mm above finished floor level – worktop with V2A stainless steel cover Hnedpfxsdnh R Hs Af Ieg Colour finish: grey / grey, Surface cleaned, signs of use and minor deformations possible Drive motor output: 2 x 1.5 kW / 400 Volt Subject to errors, technical modifications, or slight deviations from the images Photos show a similar machine Installation currently mainly in Germany, Austria, and some neighboring countries

Gamybos metai: 2012, Sąlyga: geras (naudotas), Type: IND-PA Equipment No.: 0/1220744/1 Year of manufacture: 2012 Hnjdpfohyhlgjx Af Ieg Equipment height: approx. 5600 mm Equipment width: approx. 2870 mm Equipment depth: approx. 4000 mm Number of rollers: 45 Roller width: approx. 2370 mm Shelf load: 200 kg Total load capacity: 9000 kg Color: beige

Sąlyga: dilaminuotas dirbtuvėje (naudotas), modernized machine with new LTG-StoreControl P control system 3 identical vertical carousels available External dimensions: Total height: 6500 mm Total width: 3670 mm Hedpfjrw A Eijx Af Ieng Total depth: 1560 mm 46 carrier trays, each with a load capacity of 305 kg with the following clear usable dimensions: Height = 210 mm Width = 3050 mm Depth = 520 mm Chain pitch: 254 mm Additionally included: 46 intermediate shelves for halving the usable height Total load capacity up to 14,200 kg Deposit table at 1000 mm above finished floor level with stainless steel worktop Color: GREY / DARK GREY, surfaces cleaned, signs of use possible Drive motor power: 1 x 5.5 kW / 400 Volt Subject to errors, technical modifications, and deviations from the photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Sąlyga: geras (naudotas), Gamybos metai: 2003, Kardex Vertical Carousel Model: SYS-120-1414 Serial no.: 03001086/001 Year: 2003 Unit height: approx. 3110 mm Unit width: approx. 2950 mm Unit depth: approx. 1150 mm + 300 mm tabletop Hnodpfx Afjq I R D Nj Ieg Number of trays: 14 with 7 additional drawers Tray width: approx. 2630 mm Tray depth: approx. 320 mm Tray height: approx. 330 mm Shelf load: 100 kg Total load: 1400 kg Colour: white

Sąlyga: dilaminuotas dirbtuvėje (naudotas), modernized machine with new LTG-StoreControl P control system External dimensions: Overall height: 5750 mm Overall width: 3350 mm Overall depth: 1550 mm 26 carrier trays with a payload of 250 kg each in usable clear dimensions: Height = 335 mm Width = 2650 mm Depth = 450 mm Chain pitch: 381 mm Deposit table at 1000 mm height above finished floor level – worktop made of wood/rubber Color scheme: grey / blue, surfaces cleaned, signs of use possible Drive motor power: 1 x 3.0 kW / 400 Volt Subject to errors, technical modifications or deviations in detail from photos Delivery and installation currently mainly in Germany, Austria and several neighboring countries Hnsdsdvlt Hepfx Af Ieg

Gamybos metai: 2003, Sąlyga: geras (naudotas), Type: TLI 4500/2044 Hnodpfx Aehyhlksf Iog Serial No.: 03502 Year of manufacture: 2003 Device height: approx. 4500 mm Device width: approx. 2000 mm Device depth: approx. 7010 mm Number of rollers: 44 Roller width: approx. 1680 mm Shelf load capacity: 150 kg Total load capacity: 7000 kg Superstructure: see photo, 3000 mm Colour: beige

Sąlyga: dilaminuotas dirbtuvėje (naudotas), modernized machine with new LTG-StoreControl P control system Optional control system expansion available 2 identical machines available External dimensions: Installation height: 4,730 mm Installation width: 3,270 mm Installation depth: 1,680 mm 29 carriers, each with a load capacity of 250 kg Usable clear internal dimensions per carrier: H = 215 mm W = 2,730 mm D = 620 mm Chain pitch: 254 mm For 0 support sets, intermediate bottoms are installed, load capacity per storage level then 160 kg Intermediate bottoms can be manufactured upon request Deposit table at 900 mm above FFL (finished floor level) – working surface with stainless steel (V2A) cover Color: grey / grey Surface cleaned, signs of use possible Drive motor power: 2 x 1.5 kW / 400 Volt Hnsdpfxodnhz Us Af Ijg Subject to errors as well as technical changes or deviations in details from the photos Delivery & installation currently mainly in Germany, Austria, and other neighboring countries

Sąlyga: geras (naudotas), Gamybos metai: 1990, Megamat Vertical Carousel Model: 112-350-13 Machine No.: 7479 Year of manufacture: 1990 Machine height: approx. 2,950 mm Machine width: approx. 2,675 mm Machine depth: approx. 1,130 mm + 280 mm tabletop Number of trays: 13 Tray width: approx. 2,160 mm Tray depth: approx. 295 mm Tray height: approx. 330 mm Shelf load capacity: 100 kg Total load capacity: 1,300 kg Colour: beige Hnodpfx Afsv Ewn Do Ieg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Modernized machine with new LTG StoreControl P control system External dimensions: Overall height: 5000 mm Overall width: 2650 mm Overall depth: 1250 mm plus 300 mm storage table 34 carriers, each with a load capacity of 140 kg with usable dimensions: Height = 220 mm Width = 2220 mm Depth = 410 mm Chain pitch: 254 mm Hodednfdlspfx Af Isng Storage table at 1000 mm above finished floor level, with wooden worktop Color: GREY, surfaces cleaned, signs of use possible Drive motor power: 1 x 1.8 kW / 400 Volt Subject to errors and technical modifications. Delivery and installation currently mainly in Germany, Austria and several neighboring countries.