Vertical Carousel

LTG-TOWERMAX P 7.2-250-29-215-4730

Būklė: naujas, Gamybos metai: 2024, veikimo valandos: 50 h, mašinos/transporto priemonės numeris: 305, Available: February 2023 Codpfx Apowwq Hcsasri Control unit: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots, crosswise every 250 mm Maximum load: 1,000 kg evenly distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 rpm Torque: 15.3 Nm Tool interface: HSK 63F Tool clamping: pneumatic Blow air / MQL: external Linear Axis Drives Feed rate X and Y axis: up to 50 m/min Feed rate Z axis: up to 30 m/min Color Enclosure, gantry, control cabinet: light grey Z-slide and milling head: orange Additional equipment - 15-position tool changer - Control unit in separate, mobile console

Būklė: naudotas, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Maximum spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT Cjdpfxouhauys Apajri - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simpel NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor system KNOLL VRF 500 - Workpiece evacuation with conveyor at position 6

Būklė: naujas, Gamybos metai: 2026, Working Area: 1500 – 3000 x 2100 – 12000 mm Z-Axis Clearance: 500 – 1500 mm Drive System: Omron servo drives with EtherCat protocol, X and Y axes with hardened helical racks ground to accuracy class 6, Z axis with ball screw, accuracy class 5 Linear Bearings: Bosch Rexroth 35 Travel Speed: X, Y up to 45 m/min; C, A up to 6000°/min Software Resolution: 0.0005 mm Positioning Accuracy: 0.01 mm Gantry Drive: dual-sided master/slave system with gantry angle correction Electrospindles: 8 kW to 36 kW Electrospindle Inverter: yes Maximum Electrospindle Speed: 24,000 rpm (optionally 6,000, 40,000, 50,000) Construction: welded steel, ribbed, stress-relieved, precision machined Table Type: vacuum, hybrid, steel, or aluminum with M16 or M18 holes Crodpfx Aon Nv H Sspaji #router #CNC #millingmachine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Būklė: labai geros būklės (naudotas), CHIRON DZ 18.2 KW, Year of manufacture: 2012 Crsdpfxjuviiwo Apaei Control: Fanuc 31i Travel: X / Y / Z 630 x 520 x 400 mm Pallet changer: 2x 940 x 470 mm 2 spindles Spindle distance: 320 mm 2×32-position tool changers Tool holder: SK40 Max. spindle speed: 10,000 rpm

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, X ašies eiga: 1 400 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 610 mm, ruošinio svoris (maks.): 1 400 kg, bendras aukštis: 2 492 mm, bendras ilgis: 4 367 mm, bendras plotis: 3 070 mm, stalo ilgis: 1 500 mm, stalo plotis: 650 mm, ašies variklio galia: 11 W, greitasis eiga Z ašyje: 24 m/min, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, veleno nosis: Iso 40, veleno greitis (maks.): 8 000 aps./min, veleno greitis (min.): 40 aps./min, įrankio skersmuo: 75 mm, įrankio ilgis: 250 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Included accessories: - Prearrangement for rotary table - External air blow to the spindle - Left-side screw-type chip conveyor - Automatic high-pressure coolant system through the spindle at 20 bar - Workpiece cleaning gun - Enclosure floor flushing system Csdjrg Htpopfx Apaeri - 390-liter coolant collection tank - Three-color end-of-cycle signal lamp - Full automatic shutdown

Būklė: labai geros būklės (naudotas), Taškinio suvirinimo mašina su viengubo veikimo cilindru ir viršuje bei apačioje pritvirtintais elektrodų laikikliais Gamintojas: DALEX Tipas: PMS 14-3 Išsikišimas: 350 mm Nominali galia prie 50 % ED: 80 kVA Antrinis trumpojo jungimo srovė: 54,5 kA Antrinė tuščios eigos įtampa: 7-14 V Elektrodų jėga: 80-1 200 daN įrengta: Crodpfx Ajtuwz Iopasi 8 padėčių jungiklis Pagrindinis jungiklis Prijungiamas valdymo skydelis HARMS+WENDE Sinchroninis suvirinimo valdiklis MPS 200 8 suvirinimo programos su AEG tipine lentelėle Paleidimas per kojinį jungiklį

Būklė: labai geros būklės (naudotas), Motor-driven rotary-sliding table Infinitely variable rotary table (indexing 0.001°) Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Longitudinal travel: W-axis = 1000 mm Crsdpfeif Rlbox Apasi Condition: Very good (used)

Būklė: naudotas, Gamybos metai: 2002, Maximum turning diameter: 420 mm Turning length: 1250 mm Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1250 mm Travel X2: 170 mm Travel Z2: 1250 mm Travel X3: 320 mm Travel Z3: 1250 mm Main spindle speed, max.: 3,000 rpm Main spindle motor: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Sub spindle – max. speed: 3,000 rpm Sub spindle motor: 53 kW Sub spindle bore: 102 mm Sub spindle nose: DIN 55026 size 11 Sub spindle torque: 675 Nm Sub spindle travel: 1250 mm Feed force X1/Z1: 14,000 N / 14,000 N Rapid traverse X1/Z1: 20 m/min / 40 m/min Feed force X2/Z2: 8,600 N / 14,000 N Rapid traverse X2/Z2: 20 m/min / 40 m/min Feed force X3/Z3: 14,000 N / 14,000 N Rapid traverse X3/Z3: 20 m/min / 40 m/min Number of turret stations, turret 1: 12 Number of turret stations, turret 2: 10 Number of turret stations, turret 3: 12 Number of driven tool stations: 12 / 10 / 12 Driven tool speed, max.: 6,000 rpm Torque: 36 / 21 / 36 Nm Tool holder: DIN 69880 Codpfxet U R Hze Apasri Tool holder diameter: 40 x 63 mm Total power requirement: 120 kW Machine weight approx.: 19 t Machine dimensions L x W x H: 5.77 x 2.47 x 2.62 m Accessories: HAINBUCH segment mandrel chuck on main spindle, HAINBUCH collet chuck, SPANNTOP SP on sub spindle, various tool holders (incl. for driven tools), chip conveyor, coolant system - all 3 tool turrets are prepared for internal coolant supply (ICS), but the high-pressure system is not included with the machine -

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, šlifavimo juostos plotis: 150 mm, šlifavimo juostos ilgis: 7 000 mm, aukščio reguliavimo tipas: elektrinis, bendras aukštis: 2 200 mm, bendras ilgis: 3 550 mm, bendras plotis: 2 000 mm, bendras svoris: 870 kg, šlifavimo ilgis: 1 500 mm, ruošinio svoris (maks.): 80 kg, ištraukimo jungties skersmuo: 180 mm, šlifavimo plotis: 950 mm, sukimosi greitis (maks.): 1 435 aps./min, reikalingas aukštis: 2 200 mm, vietos reikalavimas ilgis: 3 550 mm, reikalingas plotis: 2 000 mm, stalo aukščio reguliavimas: 500 mm, Įranga: dokumentacija / vadovas, Belt Grinding Machine MS92-150 3-roller redirected abrasive belt 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine base with connecting elements - Continuously variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric height-adjustable table Cedpfx Apotwb U Aoaori - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment abrasive belt - Operating instructions + manufacturer’s declaration - CE-compliant design The robust machine frame made of welded steel construction ensures extremely quiet operation. The two machine bases have an offset to allow sanding of workpieces longer than the machine table. The abrasive belt runs over 3 deflection rollers, providing a maximally accessible working area for the operator, ensuring good handling especially with manual sanding blocks. The belt drive is powered by a three-phase motor with a balanced drive pulley. The belt has adjustable pneumatic tension. The dust collection system is adequately sized to capture the resulting grinding dust and channel it to the extraction nozzle, provided it is connected to a suitable extraction system. For fatigue-free operation, the grinding unit is mounted in backlash-free linear guides. The machine table can be quickly and easily adjusted to the correct workpiece height using the electric table lift. The table lifting guide elements are maintenance-free. For loading, the table can be extended so that workpieces do not have to be pushed under the abrasive belt during placement. The electrical controls for the main functions are user-friendly and centrally located on the machine. Machine paint: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" The basic machine is supplied with one initial equipment belt (WxL) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Optional accessories: 3-axis table with integrated handling device for rotating and swiveling workpieces. The handling device is mounted centrally under the insert frame. To use the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing assembly with the rotation axis, which has a brake disc mounted on the rear. The swivel assembly is mounted on the front of the rotation axis and can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional index plate is mounted on the swivel head to allow fine alignment of the workpiece to the abrasive belt. Unlocking of the rotation and swivel axes is performed pneumatically via foot switches; movement of the rotation axes is manual. Maximum workpiece weight when used as a flat table with insert frame = 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate) = 25 daN or 120 Nm (relative to the center of the rotation axes).

Būklė: paruoštas naudoti (naudotas), Saw blade diameter: 300 mm Cutting capacity at 90° round: 100 mm Cutting capacity at 90° rectangular: 90 x 90 mm Mitre cutting capacity at 45° rectangular: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Crsdol Ra Uijpfx Apaei Space requirement: 850 x 600 x 1600 mm