"Kardex Paternoster

Kardex SYS-181-2815-80

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 66 600 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer you the following: Technical Data: Control system: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Max. table load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary tilting table including table cooling - BLUM NT laser tool measurement system - Calibration arbor with tool holder - Wireless touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper-belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, incl. rotating sight glass, air purge, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through spindle center - Operating mode 4 Psdpfx Ajxgnz Tjf Negg - Machine preparation for handling systems, consisting of: - Automatic lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system - Selection and deselection of handling system via switch on the machine control panel - incl. additional rinsing inside the working area - incl. machine preparation for job management - incl. control panel arrangement on the left - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - incl. rotary union extended to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change and prior sale. Errors excepted!

Gamybos metai: 2021, Sąlyga: naujas, Type: Gas-fired with central recuperator Max. temperature: 1,300°C Max. furnace output: approx. 700 kg/h Clear door opening (W x H): 600 x 400 mm Number of burners: 6 Number of control zones: 3 Heating capacity: 720 kW Total electrical connected load: approx. 15 kVA PLC: Siemens S7 Pgsdpfjg E S Inex Af Nog

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, The ENR series consists of air-cooled water chillers designed for industrial applications and outdoor installation. The ENR 038 model features axial fans, scroll compressors, condensers with finned aluminium coils, and a self-cleaning coaxial evaporator for maximum operational reliability. It is equipped with an internal pump, tank, fan control, and uses the low-GWP refrigerant R454B. Cooling capacity: 37 kW, low-GWP refrigerant R454B. Pedpefmd Hhjfx Af Nogg We carry a large selection of new and used water chillers available immediately from stock. Contact us for a non-binding quote. We offer rental, sales, and nationwide service for all refrigeration systems throughout Germany.

Gamybos metai: 1998, Sąlyga: geras (naudotas), I am selling a dowel drilling machine with dowel insertion unit KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programmable CNC-controlled motorized Z-axis Working width: 1200 mm Maximum working height: 36 mm Available for immediate sale Psdjd Exwgepfx Af Njgg

Sąlyga: labai geros būklės (naudotas), Here we offer a Polychromix Phazir NIR Spectrometer. Portable near-infrared analyzer Model: 1624 Specifications: Spectral range: 1600–2400 nm Pixel pitch: 8 nm Optical resolution: 11 nm Pedpon Arm Tefx Af Nsgg Stray light

Sąlyga: naujas, Gamybos metai: 2025, keliamoji galia: 2 000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2,000 kg Handheld remote control with digital display Dual foot pedal control Pgsdjncfvhjpfx Af Njg Height approx. min. 800 mm tilted to center, max. height 1,400 mm Min. height horizontal: 1,000 mm Faceplate diameter: 1,200 mm Minimum tilt angle: 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Sąlyga: naujas, FSE lift repair kit for all types The height detection-object protection-safety evaluation unit (Cedes) has been discontinued by the manufacturer and is therefore no longer available as new. Pjdpfx Afsiwc Rlo Nogg We have developed a replacement control system for these devices, ensuring continued operation for years to come. As part of this service, we provide spare parts, such as the Cedes Safe C200 CAN, immediately and free of charge on a loan basis for repair by our technicians until the device control unit is replaced. This allows the lift to remain operational, and the control system replacement can be planned accordingly. Of course, we are also able to repair and modernize all other dynamic storage systems. We would be happy to provide you with a detailed quotation!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Išoriniai matmenys: Aukštis: 5650 mm Pastabos: Mašinos aukštis pagal kliento pageidavimą gali būti sumažintas. Sumažinimas: -1,5 m, -2,0 m Plotis: 2780 mm Pjdpfxsxmgwae Af Negg Gylis: 2312 mm Talpyklos matmenys: Aukštis: 55 mm Plotis: 2450 mm Gylis: 864 mm Lentynos apkrova: 270 kg vienai lentynai Lentynų skaičius: Skaičius pagal kliento pageidavimą Bendra naudingoji apkrova: 2 x 33 150 kg Išrašų skaičius: 1 Spalva: mėlyna Pastabos: Mašinos aukštis pagal kliento pageidavimą gali būti sumažintas. -1,5 m, -2,0 m Pardavimas tik DACH šalyse (Vokietija, Austrija, Šveicarija) ir Beniliukso šalyse (Nyderlandai, Belgija, Liuksemburgas) Informuojame, kad šiuo metu parduodame ir pristatome tik D-A-CH ir Be-Ne-Lux šalims. Dėkojame už supratingumą.

Sąlyga: geras (naudotas), Gamybos metai: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical specifications – Main data: - Table surface: 605 x 300 mm - Max. longitudinal table travel (manual): 750 mm - Cross table travel: 340 mm - Grinding height between table and new grinding wheel min/max: 22.5 / 322.5 mm - Standard magnetic chuck size: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X-axis / Longitudinal travel: - T-slots (quantity x width): 3 x 17 mm - Table feed, hydraulic: 0.3–25 m/min Pedew Dvkaepfx Af Nogg - Travel per handwheel revolution: 47 mm Y-axis / Vertical movement: - Automatic vertical feed – coarse, 12 steps: 0.001–0.03 mm - Automatic vertical feed – fine, 8 steps: 0.001–0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Scale division on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes (Ausfeuerhübe): 0–5 - Rapid traverse: 400 mm/min Z-axis / Cross travel: - Automatic intermittent cross feed: 0.5–20 mm - Automatic continuous cross feed / rapid traverse: 0.1–1.0 m/min - Travel per handwheel revolution: 5.0 mm - Scale division on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 rpm Accessories: various grinding wheels Documentation included

Gamybos metai: 1998, Sąlyga: beveik kaip naujas (naudotas), Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad multimode, 2 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W (130 W optional) in multimode, 16 W in single mode Pulse energy: 16 mJ (30 mJ optional) at 3 kHz Operating modes: CW, Q-switched from 0.1 to 100 kHz Beam deflection system: Galvanometer system Pgedpfxjd Dhw No Af Nog Line width in mixed mode: approx. 0.12 mm