Išpjaustymo staklės

Boschert KS 30-120 Stanzen

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, Used swing-beam shears RAS 86.33 with newly ground upper and lower blades, regularly serviced and only lightly used Technical data: Year of manufacture: 2008 Weight: 6,800 kg Maximum sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Back gauge depth: 5–1000 mm Working height: 800 mm Strokes per minute: 30–64 min⁻¹ Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase current Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angular gauge: 2,195 mm Machine depth with angular gauge: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame throat depth: 100 mm Iodpfx Alev Tk Exedjth Tank capacity: 150 l

Būklė: naujas, Gamybos metai: 2025, Genie GS1432m Micro E-Drive scissor lift, new, used, and demonstration units available Iedporictqefx Aldoth

Būklė: geras (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Description: The machine is in good technical condition, with the possibility of testing upon prior agreement. Equipped with the Siemens Shopturn system, including a loader, and comes fully equipped. BASIC PARAMETERS Working area - Max turning diameter: approx. 410–500 mm - Max length: 800 mm - Distance between spindles: approx. 1020 mm - Swing over bed: ~700 mm - Practical use: ideal for shafts, flanges, bodies up to ~800 mm Travel (axes) - X axis: ~480 mm - Y axis: ??100 mm - Z axis: ~800–845 mm Itedpfey Rgafsx Aldoh - B axis: ??110?? (5-axis machining) - C axis: 360° (indexing + interpolation) This makes it a full-fledged turn-mill center (not a conventional lathe). Spindles - Main spindle speed: ~5000 rpm - Main spindle power: ~25–34 kW - Bar capacity: approx. 76–87 mm - Sub-spindle speed: ~6000 rpm - Milling spindle (the main difference compared to a conventional lathe) - Speed: up to 12,000 – 20,000 rpm - Power: ~19–22 kW - Taper: HSK-A63 or Capto C6 - Supports: milling, drilling, tapping, and 5-axis simultaneous operations Tool system - Tool magazine: 24 – 48 tools - Live tools: yes (fully integrated) Control system - Siemens 840D sl + CELOS (most common) Weight and dimensions - Weight: ~10,000 kg - Dimensions: approx. 6.5 × 2.7 × 2.0 m

Būklė: geras (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 15 996 h, įėjimo įtampa: 400 V, bendras svoris: 6 750 kg, 1000 kN Max. stroke: 200 Weight: 6,750 kg Noise level: 74 dB Year of manufacture: 07/2010 Voltage: 400 V / 50 Hz Rated current: Iodpfetwliwjx Aldsth Current operating hours: 15,996 hours with manual angle measurement and correction system with safety laser UVV (accident prevention regulations) inspection performed at regular intervals / maintenance always carried out regularly by Amada Accessories: Tool Die: 2 pcs UKB 20.478 V8/12 30° 835 mm 3 pcs UKB 20.344 V4/V7 88° 835 mm Tool Holders: 4 pcs UKB base for double V die 20.287 + 60.919 835 mm Press Brakes: 5 pcs UKB 10.261 H100 R0.6/90° 2 pcs UKB 11.158 H80 R0.6/30° 2 pcs UKB 11.200 H66 R0.8/90° Other: Light curtain in need of repair (replacement value approx. €4,500) – included separately as a spare part (has been replaced) The machine can be inspected live under power in DE84051 Mettenbach by appointment. Sale only to businesses and under exclusion of any warranty!

Būklė: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Itedpfx Alod Ixadjdeh Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Būklė: naujas, Model designation Ijdpogvquwsfx Aldoth Shark 332-1 CCS

Gamybos metai: 2017, būklė: paruoštas naudoti (naudotas), - NAUDOTA - FIBRINIO LAZERIU VAMZDŽIŲ PJOVIMO MAŠINA SU AUTOMATINE PAKROVIMO/IŠKROVIMO SISTEMA MIN. APVALUS SKERSMUO: ø 25 mm MAKS. APVALUS SKERSMUO: ø 355 mm Itsdpfxex E Eihe Aldjh MAKS. KVADRATINIS PJUVIS: 260 X 260 mm MAKS. STAČIAKAMPIS PJUVIS: 300 X 200 mm MAKS. LEIDŽIAMA APKROVA: 100 Kg/m ŠALTINIS: IPG YLS-4000 ; 4000 W VALDYMO BLOKAS: SIEMENS 840D SVORIS: 12 500 Kg PASTABA: AUTOMATINIS PAKROVIMAS 3-12,5 m; AUTOMATINIS IŠKROVIMAS 12,5 m; 3D PJOVIMO GALVUTĖ; KAPACITINIS JUTIKLIS; AUTOMATINIS REGULIAVIMAS

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, plieno lakšto storis (maks.): 3 mm, bendras svoris: 15 000 kg, įėjimo įtampa: 400 V, Lenkimo kampas (maks.): 180 °, darbinis ilgis: 3 200 mm, darbo diapazonas: 3 200 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Technical specifications: Year: 2013 Working length: 3,200 mm Ijdpjwq Rumefx Aldjth Maximum sheet thickness (mild steel 400 N/mm²): 3.00 mm Maximum sheet thickness (stainless steel): 2.00 mm Maximum sheet thickness (aluminium): 4.00 mm Maximum bending height on four sides: 250 mm Upper beam stroke: 650 mm

Būklė: naudotas, Gamybos metai: 1996, Šlifavimo ilgis: 1 000 mm Šlifavimo plotis: 550 mm Detalės aukštis: 400 mm Stalo tvirtinimo paviršius: 1 580 x 550 mm Maks. stalo apkrova: 950 kg Magnetinė plokštė: 1 000 x 550 mm Stalo išilginė eiga (X ašis): 1 200 mm Stalo padavimas: 1–30 m/min Vertikalūs padavimai: 1–300 mm/min Z ašis: 470 mm Skersinis padavimas: 1–2 000 mm/min Šlifavimo disko matmenys: 400 x 100 x 127 mm Šlifavimo disko apsukos: 1 500–3 500 aps./min. Itedpfx Aloxx A Dmjdoh Šlifavimo veleno pavara: 11,00 kW Bendra galingumo paklausa: 23,00 kW Staklių svoris apie: 7,50 t Užimamas plotas apie: 4,50 x 3,20 x H2,90 m Aušinimo skystis su integruotu siurbliu hidraulinėje talpykloje, su nusiurbimu.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Naudota automatinė hidraulinė juostinė metalo pjovimo staklė MEP SHARK 332 NC EVO Juostos matmenys: 3320x27x0,9 mm Pjovimo kampas: nuo 45° iki +60° Darbo režimai: rankinis, pusiau automatinis-dinaminis, pusiau automatinis, automatinis Pjovimo greitis: 15-100 m/min (inverteris) Pjovimo pajėgumas: prie 0° – apvalus 300 mm – kvadratinis 260 mm – stačiakampis 330x260 mm Matmenys: 2600x2320x2000 mm Itjdeul Svlopfx Aldsh Pagaminimo metai: 2011 Svoris: 1050 kg Įrenginys yra pilnai atnaujintas ir patikrintas.