Multipli 382 pirkti naudotą (711)

Gamybos metai: 2006, būklė: paruoštas naudoti (naudotas), An ITG induction system for the heat treatment of workpieces with a vertical chain lifting system is available. Process: Heating/hardening, Number of inductors: 2, Inductor type: copper coil, Cooling: water cooling, Connected load: 382 kVA, Rated current: 552 A. Documentation available. On-site inspection possible. Hedpfsw Exrvox Am Tjnu

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, New device with 12 months warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise dough temperature control throughout the year + Rapid swelling during mixing without the need for ice + Softer doughs thanks to freshly chilled, liquid ice water + Accurate dosing possible via water mixing and metering unit + All water-carrying components are made of stainless steel, maintenance-free + Hygienically perfect, clean potable water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration unit + Refrigeration systems with expansion valve + Electronic ice bank controller + Stainless steel cooling evaporator + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water reservoir + Drain tap in the ice water reservoir + High flow capacity + Compact dimensions + Easy-care surface structure + Low energy consumption SPECIAL accessories, optionally available at extra cost: - Wall bracket in stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - Three-way changeover valves --- for water mixing and dosing units with only 2 inlets (cold / hot) + €349.00 net Technical specifications: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters / hour - Peak cooling output*: 330 liters / hour Hnedpfx Amjivdvvs Tou - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Electrical connection: 230 V - 50Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow at 2 bar: 20 liters / min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 80 kg - Energy consumption at 100 liters: 1.5 - 2.5 kWh * at +17.5°C inflow and +2.5°C outflow

Gamybos metai: 2021, būklė: naujas, ebmpapst EC radial module, backward-curved, single-sided intake, with support spider Type: K3G250-PR04-H2 Motor: M3G084-DFePhase: 1~ Rated voltage: 230 VAC Rated voltage range: 200 - 277 VAC Frequency: 50/60 Hz Data specification type: ml Speed: 3080 min-1 Power input: 500 W Current consumption: 2.3 A Min. ambient temperature: -25°C Max. ambient temperature: 40°C The fans are new and in original packaging, with 18 units per pallet, from production year 10/2021. Hedpsi D Eiqefx Am Tsnu Multiple pallets available. Including packaging, ex works 53567 Buchholz (Westerwald), Germany. We are happy to organize shipping. Please inquire about freight costs, specifying the destination.

Būklė: naujas, Gamybos metai: 2026, The ATC plotter series has been designed for professional use in large industrial plants and factories, serving the production of complex large-format components. Thanks to its special construction, the machine is adapted for manufacturing, among other things, foundry models and yachts, significantly reducing processing time. To meet the requirements of heavy-duty machining, ATC machines feature additionally reinforced frames and more powerful AC servo drives on each axis. The presence of five axes supports the processing of even the most demanding components. Plotters in this series are standardly equipped with automatic tool changers, a six-position linear tool magazine, and a tool height sensor. These solutions significantly accelerate processing when multiple milling cutters are required. Hjdeiq U Tqepfx Am Tonu Materials that can be machined: - Wood - Wood-based materials (chipboard, MDF, OSB, etc.) - Plastics - Composites - PVC - Non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The machine frame is made of steel and cast iron, providing high rigidity and resistance to overloads related to the machining process. WORKING AREA: The usable working area of our machine is 3000 x 6000 [mm]. Z-AXIS RANGE AND GANTRY CLEARANCE: Parameters can be tailored to individual customer requirements. DRIVES: Our machines are driven by SERVO motors, ensuring proper acceleration and speed in every direction. The X and Y axes use classic, proven helical racks for durability and precision, while the Z axis is powered by a high-quality ball screw. All axes run on linear rail guides. SPINDLE: A high-class, powerful brushless spindle drives the cutting tool. Spindle speed ranges from 6,000 to 24,000 rpm. A frequency inverter with greater power than the spindle is used for power supply, protecting against speed drops under heavy load. TOOL MAGAZINE: Standard equipment includes a linear tool magazine with six HSK holders. Additional tool magazine positions are available as an option. SOFTWARE: The machine is supplied with dedicated CAD/CAM software, enabling fast and easy design of parts, which the program then converts into G-code. Import of ready-made files from other programs is also possible. CONTROL SYSTEM: Operation is managed via a controller equipped with its own processor and operational memory, ensuring stable and reliable performance.

Būklė: naujas, Gamybos metai: 2026, CNC Milling Router 2030 ATC 4 axes, tilting spindle +/- 90 degrees Working area: 2100 x 3000 mm The ATC router series is designed for professional applications in large industrial facilities and factories. These machines are intended for machining a wide range of materials. To meet the demands of heavy-duty processing, the ATC machines are equipped with an additionally reinforced frame and more powerful AC servo drives on each axis. A vacuum table is standard equipment on these machines. It is also possible to install a hybrid table. Routers in this series are equipped as standard with automatic tool change, a six-position linear tool magazine, and a tool height sensor. These solutions significantly speed up machining processes that require the use of multiple cutters. Materials processed: - Wood - Wood-based materials (chipboard, MDF, OSB, etc.) - Plastics - Composites - PVC - Non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The machine frame is made of steel and cast iron, providing high rigidity and resistance to overloads associated with machining processes. WORKING AREA: The usable area of our CNC is 2100 x 3000 mm. MATERIAL FIXING: The machine is equipped with a vacuum table. Optionally, a hybrid or T-slot table can be installed. Z-AXIS RANGE AND GANTRY CLEARANCE: Standard Z-axis travel is 300 mm (option to increase available). DRIVES: Our CNC machines use SERVO motors, ensuring adequate acceleration and speed in all directions. The X and Y axes utilize proven helical racks, delivering both long lifespan and precision, while the Z axis is driven by a high-quality ball screw. All axes move on linear rail guides. SPINDLE: The cutting tool is powered by a high-performance, water-cooled, durable brushless spindle. The spindle utilizes high-quality machine bearings for exceptionally quiet operation and above-average durability. Spindle speed ranges from 6,000 to 24,000 rpm. Power is supplied by an inverter with a higher power rating than the spindle, preventing speed drops during heavy-load operation. Hnsdpeirfavsfx Am Tju TOOL MAGAZINE: Standard equipment includes a linear tool magazine with 6 ISO30 tool holders. SOFTWARE: The machine comes with the latest version of CAD/CAM software. The software allows fast and easy design of components, which are then converted into G-code. It is also possible to import ready-made files from other software. CONTROL: Control is via a controller with its own processor and operational memory, ensuring stable and reliable operation. The controller offers active vector analysis for smooth machine movement and minimal processing errors. The controller features a resume function after power loss, eliminating the need to restart the program. Internal memory allows the machine to operate without reloading the program each time.

Gamybos metai: 2020, būklė: naujas, The use of a photocell in the workpiece area allows measurement of its length, thereby enabling activation of the spray guns when the workpiece enters detection range, and deactivation of the guns immediately after coating is completed. The photocell is provided as standard equipment. Workpiece identification is carried out using special tags. Identification plates with holes are mounted on the workpiece hanger. Based on this, the PLC controller, in conjunction with the photocell, identifies the painted item and activates or deactivates the spray guns at the appropriate moment, resulting in savings of both energy and powder coating material. Vertical contour detection of the workpiece shape: The use of light barriers with horizontal sensors enables the PLC to analyze the vertical profile of the workpiece. The PLC controller calculates the time at which the workpiece should appear in the gun zone; based on this, selective activation or deactivation of the spray guns is possible. Integration of light barriers with multiple sensors, both horizontally and vertically: This approach enables precise measurement of the workpiece’s dimensions, which also allows for manipulator control if required. Hjdpfx Ajfy T Arjm Tenu The benefits of using photocells or light barriers are primarily the savings in powder and energy. Unnecessary spraying is eliminated in areas where no workpiece is present. Precise gun control is achieved through the use of light barriers.

Gamybos metai: 2020, būklė: naujas, The company ROMER is also involved in the production of overhead conveyor systems. Cross transfers (cross transports) are designed and manufactured for specific installations. Examples of such equipment are listed below: conveyor systems. Depending on customer requirements, the conveyor systems can move on the ground or be suspended from rails. - For efficient solutions in manual installations, we recommend suspended crossbeams (cross transport). - In automated systems, chain conveyors are most commonly used, as they operate continuously and offer an excellent solution for companies focused on quality and process repeatability. - For companies that manufacture different products simultaneously and, for example, operate multiple booths with different colors, flexible solutions using a non-powered conveyor are implemented. This is the most expensive option. Hnodpfofz Difjx Am Tju

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). Hnjdpfx Aefz I Edem Teu - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2014, būklė: naujas, mašinos/transporto priemonės numeris: RE-HU-2014-1603-1, System: Chamber Filter Press, Demonstration Model - As New Operating Hours: None Application Area: Chamber filter press, laboratory press, pilot plant, wine press Design: Side-bar guided Filter Plate Size: 250 x 250 mm Number of Plates: 8 Filter Plates: Polypropylene (PP) Cake Thickness: 25 mm Filter Cloths: Optionally available, tailored to the medium Discharge: Open Hodpfx Asb Dluwjm Tsnu Filtration Area: Approx. 0.56 m² Press Capacity: Approx. 7 dm³ Plate Package Length: Approx. 379.2 mm Filtration Pressure: Approx. 15 bar Plate Handling: Manual Product-contact Parts: PP and stainless steel Dimensions (LxWxH): Approx. 960 x 400 x 360 mm Weight: 350 kg (Photo shows identical unit) Pump Technology: Optional Purchase or Rental: Inspection of units by appointment at our facility. Additional Information: Multiple units available. Please place your order in advance due to high demand. Would you like to rent or purchase this system? Contact us – we are glad to assist you.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, Demonstration machine with approx. 9 operating hours One more machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput capacity We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple turning positions Option of double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% a.d. (absolutely dry basis) Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC controller - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off when rotor is idling - Speed 70-90 rpm for high throughput - Cycling control to minimize idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform. Optional shredder features at extra cost: - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or material thickness less than 3 mm) - Angled conveyor belt + €8,770 net Angle: adjustable 0-60 degrees Hnodpfxob Ny Eye Am Tju Discharge height: approx. 2,000 mm - Automatic overband magnet + €5,980 net Alternatively, fixed magnetic block over the conveyor belt for manual cleaning + €990 net (for low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop each synchronised with the shredder) Alternatively, manual start and stop of the belts + €595 net Material requirements: - Moisture content (a.d.) must be less than 30% - Installation temperature: heated area with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., lead to increased wear

Būklė: naujas, Gamybos metai: 2025, lazerio galia: 6 000 W, darbo diapazonas: 6 000 mm, We, Airtech Stickstoff GmbH, have been a partner of Bodor Laser for 8 years. We offer our customers cost-effective, state-of-the-art laser cutting machines that deliver real value. Our comprehensive services include installation and commissioning by our own service team. German-language training is also part of our offering. Top quality at top prices. Hnodpfxefbg E To Am Tsu - Can be operated with or without a loading system; two options are available here: fully automatic with bundle storage or a semi-automatic system capable of handling multiple bars of long material. - Simple programming. - 3 machine types available for tube diameters from 120 mm to 350 mm. - Laser power up to 12 kW.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Condition of the machine is very good, it has performed only 123,000 operations. CNC-controlled automatic machine, designed for processing welded frames. Hodjm Ak R Uopfx Am Tsnu Independent drive and control system. Multiple use of the same processing time Operates in a welding and cleaning line Does not require additional floor space in the hall Can be adapted to work in a sash production line All operations are performed during the cooling phase: drainage vent grooves vent holes in colored profiles drilling of frame for mullion connector drilling of holes in the frame for hinges (x6) The center has its own frame transportation system from welder to cleaner SPS, NC control User-friendly visualization

Būklė: naujas, Extraction rate at filter unit connection*: 2050 m³/h Total power consumption*: 1.04 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 69 dB(A) Dimensions L/W/H in mm: L 1290 / W 588 / H 595 Colour: RAL 7035 Weight: 113 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour available on request Application: Separation of emulsion mist for medium to very large machine workspaces. Your advantages with the COBARON series: - 15 device variants available Hnjdpfeh Rfbxex Am Tou - Direct from the manufacturer - ISI-TRONIC included as standard (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and airflow - Available with various filter configurations - High-quality filter media for pre- and main filtration - Separation efficiencies up to 99.95% - Wide range of mounting and connection accessories - Flexible adaptation to suit the application - Optimal service life - Quality made in Germany With COBARON, we offer a filtration system that meets the diverse machining possibilities and the resulting contaminant profiles that arise today. Even the standard COBARON combination filter system features multiple filter configuration options for versatile application. The different expansion levels of the COBARON series have been specifically developed for applications that represent borderline cases for many filtration systems (mechanical or electrostatic). The combination of both proven filter principles, as appropriate for the application, increases the effectiveness of the air filter and extends service life. COBARON can be operated as a purely mechanical filter unit with various filter stages or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can, for example, be controlled via laptop.

Būklė: geras (naudotas), Size: Hnodpfoh Rmrnox Am Tju Length: 12,500 mm Width: 350 mm Multiple units in stock

Būklė: naujas, Gamybos metai: 2026, Professional CO2 laser with a 1600 mm x 1000 mm worktable and a tube rated at 150 W, reaching peak power of up to 168 W! Standard equipment includes a CW5200 industrial water chiller, a compressor for lens and material air assist, and an exhaust system. Work Area: The 1600 x 1000 mm table enables work on large and complex projects. Laser Power: 150 W rated, with peak output up to 168 W. This ensures fast and precise operation. Cooling and Performance: Equipped with a CW5200 water chiller for optimal working conditions and a compressor for lens and materials air assist. Advanced Technologies: Ruida RDC6445S controller, supporting multiple graphic file formats, WiFi and USB interface, and color separation. High Precision & Repeatability: Thanks to precision stepper motors and LEADSHINE linear guides, enabling operation at resolutions up to 2500 DPI. Versatile: Excellent results when engraving and cutting materials such as acrylic, wood, textiles, leather, plastics, and more! Unique standard equipment: PURI 150-168W laser tube, exhaust system, robust steel honeycomb table, and air assist blower compressor. Advanced features, high build quality, and a wide range of applications make our CO2 Laser 1610G not just a machine, but an investment in the future of your business! Model: 1610G Work Area: 1600x1000mm (Y-axis pass-through table) Laser Rated Power: 150 W Peak Laser Power: 168 W (!) Tube Type/Laser Type: Glass CO2 laser tube Cooling System: Closed-loop water cooling – CW5200 chiller Max Engraving Speed: 800 mm/s Recommended max cutting speed: 400 mm/s Max Cutting Thickness: up to 25 mm depending on material and parameters Hnedpfstvmnqsx Am Teu Minimum Letter Engraving Size: 1 mm x 1 mm Engraving Precision: 2500 DPI Repeatability: ±0.01 mm NEW – Controller and Mainboard: Ruida RDC6445S – a module with extensive features, ensuring advanced control over parameters and machining process Supported Graphic Formats: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported Interfaces: WiFi, USB Color Separation: Yes Drive System: Hybrid closed-loop stepper motors with high holding torque by LEADSHINE 15-mm PMI linear rails Standard Equipment: PURI laser tube 150-168W Fume extractor and ducting CW5200 chiller Knife table Robust steel honeycomb bed Air assist compressor

Būklė: beveik kaip naujas (naudotas), 1 nenaudotas universalus vertikalus frezavimo galvutė, tinkanti ORADEA / EURO-MILL FUS 32 Konstrukcija „MAHO“, įtvirtinimas ISO 40, pinolio eiga 100 mm, numatyta variklio galia apie 3–4 kW, maks. sūkiai 2000 aps./min, ... Papildoma įranga: - Daugiklis, perdavimo santykis 1:4, įtvirtinimas ISO 40 Kaina: 499,00 EUR - Priedas automatiniam vertikalios frezavimo galvutės pinolio pavaros įrenginiui, sistema „MAHO“, 6 pašaros 0,02–0,2 mm/aps. Kaina: 1.880,00 EUR - Skersinė frezavimo galvutė, papildoma galvutė vertikalios frezavimo galvutei su ISO 30 kūgiu, pasukama, 360 laipsnių Kaina: 585,00 EUR pridedama įstatyminė PVM. Hsdpfx Aoddtwbsm Tonu Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Vokietija

Būklė: naudotas, Gamybos metai: 1999, mašinos/transporto priemonės numeris: 228, MULTIPLE OSCILLATING MORTISER BACCI MOD. MX90 - USED - 5+5 horizontal spindles - 2+2 vertical spindles - Individually selectable spindle speeds per motor: 6,000 / 12,000 rpm - Max slot inclination: 20° - Standard tilt inward and outward: -7° / +30° - Max. spindle center distance: 1280 mm - Serial no. 228 - CE compliant - Year: 1999 Hnedpfxjwrd A To Am Tsu - Complete with manual and CE declaration

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Sabroe / York / Stal Ammonia Refrigeration Plant (NH3) General Specification of the Set: Main Brands: Sabroe, York, Stal, Arctos Refrigerant: R717 / NH3 (Ammonia) Description: Complete, high-capacity industrial refrigeration system comprising multiple integrated modules. The full line includes: 1. Screw Compressors: - Sabroe SAB 83 (Year 2004): Displacement 1603 m³/h, speed 3600 rpm, dimensions: 3900 x 1250 x 2150 mm. - York Refrigeration SAB 83 (Year 2001): Displacement 1331 m³/h, speed 2950 rpm, dimensions: 3150 x 1300 x 1600 mm. Set includes a 675 l pressure vessel (800 x 800 x 2150 mm). - ABB Stal Refrigeration S26B (Year 1994): Dimensions: 1550 x 1450 x 2400 mm. Hedpfxjyp H Tze Am Tjnu - Stal Refrigeration AB SVA26E (Year 1991): Compressor type S26A-25, displacement 700 m³/h, dimensions: 1600 x 1000 x 2420 mm. 2. Separator Tanks and Pumping Stations: - Stal-Astra NH3 Separator (Year 1991): Insulated, capacity 4300 l, dimensions: 4100 x 1400 x 1400 mm, equipped with ammonia pumps. - Stal-Astra NH3 Separator (Year 1991): Insulated, capacity 3000 l, dimensions: 4100 x 1100 x 1100 mm, equipped with ammonia pumps. 3. Additional Equipment and Control Systems: - Arctos ARLEX ND Deaerator (Year 2018): Modern module supporting the efficiency and safety of R717 refrigerant operation, dimensions: 570 x 400 x 1100 mm. - Main Control Cabinet: Advanced central unit, 4.8 m long, equipped with a modern Siemens HMI touchscreen panel, dimensions: 4800 x 630 x 2200 mm. - Rittal Control Cabinet: Equipped with a WEG variable frequency drive (inverter), dimensions: 1000 x 600 x 2280 mm. This powerful refrigeration plant combines proven, high-performance screw compressors from leading manufacturers. The presence of large, insulated separator tanks with integrated pumps ensures adequate power reserve and operational stability in ammonia circuits. Despite the varying ages of individual components (from 1991 to 2018), the system forms a coherent whole, managed by an advanced control centre featuring Siemens and WEG solutions.

Gamybos metai: 2007, būklė: naujas, Book Case Making Machine Hoerauf BDM Speed Year of Manufacture: 2007 Description: - Color monitor - Automatic adjustment - Board pre-feeder belt - Board magazine - Board cutter: KS - Stiff lining material feeder - Flexible lining material feeder - Multiple-up feeder - Gluing unit Hsdpfx Ajvc Ub Ajm Tsnu - Viscosity control - Two-stage lining and covering device - Pressing station - Stacking delivery - Pump Maximum opened format: 680 x 380 mm Minimum opened format: 190 x 130 mm Mechanical performance: up to 85 cases/min Note: Technical data subject to errors and specification changes in comparable models by the manufacturer.

Būklė: geras (naudotas), Gamybos metai: 2003, Horizontal band saw, fully automatic, with vise feed Cutting capacity 90° Round: 400 mm Square: 400 x 400 mm Cutting speed: 15 - 90 m/min Working height: 800 mm Saw blade dimensions: 4570 x 41 x 1.3 mm Material feed per stroke: 560 mm Multiple feed: up to 9 times = 5040 mm Motor power: 5.5 kW Dimensions (L x W x H): 2250 x 2850 x 1700 mm Weight: 2500 kg Accessories / Special features: • Fully hydraulic: workpiece clamping, saw feed, bow lift, and material feed • Vise feed • Worm chip conveyor • Fully automatic operation or single cuts • Automatic adjustment of bow lift height according to material diameter • Max. cut length 560 mm with single feed • 5040 mm with multiple feed • Hydraulic clamping pressure regulation for the vise • Saw band guidance via deflection rollers and carbide jaws • Constant saw blade tension with automatic shutoff in case of blade breakage • Coolant system • Piece counter • Emergency stop switch • CE-compliant Hnjdpfx Aeynaz Njm Teu Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: naujas, galia: 382 kW (519,37 AG), kuro tipas: dyzelinas, padangos dydis: 385/65-22,5, ašių konfigūracija: 6x6, ratų bazė: 4 350 mm, kuras: dyzelinas, kuro bako talpa: 390 l, stabdžiai: retarderis, spalva: juodas, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, pakaba: plienas-oras, Įranga: ABS, AdBlue, EBS (Elektroninė stabdžių sistema), autonominis šildytuvas, borto kompiuteris, centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, elektroninė stabilumo programa (ESP), kranas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priekabos jungtis, priešrūkiniai žibintai, retarderis, suodžių filtras,

Būklė: naujas, galia: 382 kW (519,37 AG), kuro tipas: dyzelinas, bendras svoris: 32 000 kg, ašių konfigūracija: > 3 ašys, spalva: mėlyna, pavaros tipas: automatinis, bendras plotis: 2 250 mm, bendras aukštis: 4 000 mm, krovimo vietos ilgis: 9 250 mm, krovinių skyriaus plotis: 2 550 mm, krovos erdvės aukštis: 1 050 mm, Gamybos metai: 2026, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), galinis keltuvas, kranas, navigacijos sistema, oro kondicionavimas, suodžių filtras,

Būklė: naudotas, rida: 159 000 km, galia: 382 kW (519,37 AG), pirmoji registracija: 10/2024, kuro tipas: dyzelinas, bendras svoris: 26 000 kg, ašių konfigūracija: 3 ašys, stabdžiai: retarderis, pavaros tipas: automatinis, bendras plotis: 2 550 mm, bendras aukštis: 4 000 mm, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), kranas, navigacijos sistema, oro kondicionavimas, suodžių filtras,

Būklė: labai geros būklės (naudotas), galia: 54 kW (73,42 AG), kuro tipas: dyzelinas, spalva: kitas, kėlimo aukštis: 5 850 mm, Gamybos metai: 2014, veikimo valandos: 4 124 h, Cilindrų skaičius: 4 Svoris be apkrovos: 4 500 kg Matmenys (ilgis x plotis x aukštis): 382 x 181 x 192 cm Variklio tipas: Kubota V3307-CR-T-EW02 Keliamoji galia: 2 500 kg Greitojo tvirtinimo sistema: yra CE ženklas: yra Techninė būklė: labai gera Vizualinė būklė: labai gera = Papildomos funkcijos ir priedai = - 3-iasis hidraulinis kontūras - Darbiniai žibintai - Ventiliatorius - Purvasaugiai - Padėklų šakės - Radijas - Greitas tvirtinimas - Signaliniai žibintai = Pastabos = Hodjzzcv Uopfx Am Tsnu Pavara Emisijos standartas: IIIB / IV (laikinasis) Bendras Šalies gamintoja: Prancūzija

Būklė: naujas,