Monitoriai pirkti naudotą (1 965)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Austrija
1 225 km
Kaiščių gręžimo ir įkalimo staklės Ganner Index Logic
GannomatIndex Logic 130 Typ 471L130
Skambinti
Būklė: naudotas, Gamybos metai: 2014, Used machine
Year of manufacture: 2014
Features and technical data:
Completely in standard configuration with:
- Support with linear guide consisting of:
1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm
Tool speed selectable via operator software (3000/5000/8000 rpm)
1 pc. blow-off, gluing, and dowel driving station for dowels Ø 8 mm, dowel length 25-50 mm
- Fully automatic, electronically controlled central lubrication
- X-axis NC controlled, with working length 1300 mm, travel speed max. 105 m/min
- Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm
- Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter, drilling depth from 0-35 mm (with drill length GL 70 mm) is automatically set with insertion projection
- Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas
- Glue quantity continuously adjustable via operator software
- Selector switch GLUE/WATER for rinsing the glue system, each with:
1 stainless steel tank for 7.5 kg glue and 7.5 l water
- Control lamp for glue residue indication in the glue tank
- 1 pc. side stop left, 1 pc. side stop right, and 1 pc. center stop (all removable)
- 4 pcs. start buttons for individual operation with 1-4 workpieces
- 4 pcs. pneumatic angular clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm
- 1 pc. suction funnel, connection Ø 80 mm
1 pc. TCT control with:
Built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C,
TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 7
- Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and work sequence optimization, 4 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, error diagnostics in plain text
Options:
1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle
Lrjdpfx Akjy Ih Skevsn
1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel driving station (programmable from 5-40 mm), travel speed max. 30 mm/sec
1 single-spindle vertical drilling unit, drilling from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation e.g. for Häfele Minifix)
4 vertical angular clamping cylinders 10° with mounting, additionally,
1 keyboard with mounting
Availability: as agreed; currently being overhauled at Ganner factory
Location: Austria
Mažas skelbimas
Vokietija
1 266 km
EMAG VSC 250
EMAGVSC 250
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, veikimo valandos: 38 546 h, X ašies eiga: 745 mm, Z ašies eigos atstumas: 300 mm, ašies variklio galia: 18 000 W, veleno greitis (maks.): 4 500 aps./min, bendras aukštis: 3 200 mm, bendras plotis: 1 500 mm, bendras svoris: 7 000 kg, valdiklių gamintojas: SIEMENS, valdiklio modelis: SINUMERIK 840Dsl with integrated PLC S7-300, pozicionavimo tikslumas: 1 mm, gaminio ilgis (maks.): 3 900 mm, įrankių magazino lizdų skaičius: 12, ašių skaičius: 2, Šis vertikalusis tekinimo staklės modelis „EMAG VSC 250“ pagamintas 2011 metais. Jame įdiegta „Siemens SINUMERIK 840Dsl“ valdymo sistema, tvirtas hidraulinis 6-spyruoklinis griebtuvas ir 12 įrankių vietų turinti flanšinė revolverinė galvutė. Su iki 4500 aps/min sukamuoju greičiu ir 18 kW pagrindinio suktuvo variklio galia, ji idealiai tinka tiksliems ir efektyviems darbams. Norėdami gauti daugiau informacijos apie šį vertikalų tekinimo staklį, susisiekite su mumis.
Papildoma įranga (pasirenkama)
• EMAG hidraulinis specialusis 6-gripų griebtuvas su paviršiaus fiksavimo įtaisu ir centrine tepimo sistema
• 15 colių TFT monitorius
Lsdpozg I Dhsfx Akvjrn
• V24 sąsaja
Staklių privalumai
Kokybiniai staklių privalumai
• Staklės, skirtos vienos pamainos darbui
• Maksimali patalpos temperatūra: iki 30 °C
• Maksimali drėgmė: 50 %
• Garso slėgio lygis: 78 dB(A)
• Yra antrasis įrenginys, pagamintas 2014 m.
Techniniai mašinos privalumai
• Velenų sukimo momentas: 300 Nm
• VDI veleno skersmuo: 40 mm
• Maksimalus varomųjų įrankių greitis: 6000 aps/min
• Maksimalus varomųjų įrankių sukimo momentas: 40 Nm / 8,5 kW
• Aušinimo sistemos standartinis tiekimo slėgis: 7 bar Maksimalus tiekimo slėgis: 7 bar Vidinis aušinimo skysčio tiekimo slėgio diapazonas: 7 bar (nereguliuojamas) Aušinimo skysčio bako talpa: 360 litrų
• Griebtuvo modelis: 6AGF 260 K6 K14
• Spindelio skersmuo: 260 mm
• Spindelio svoris: 57 kg
• Maksimali vidinio fiksavimo jėga (50 bar): 12,8 kN
• Maksimali išorinio fiksavimo jėga (50 bar): 4,2 kN
Papildoma informacija
Mašina vis dar prijungta prie elektros tinklo
Technical Specification
Driven Tools Yes
Dimensions
Machine Depth 3900 mm
Mažas skelbimas
Salzhausen
919 km
Tinklo atsarginės sistemos, avarinė elektra, saugos elektra
Albari Power Systems GmbH
Skambinti
Būklė: naujas, Gamybos metai: 2026, bendras svoris: 5 250 kg, kuro tipas: dyzelinas, bakelio talpa: 800 l, spalva: raudona, galia: 400 kW (543,85 AG), išėjimo srovė: 720 A, išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 440 kW (598,23 AG), nominali (akivaizdi) galia: 500 kVA, bendras ilgis: 4 450 mm, bendras plotis: 1 600 mm, bendras aukštis: 2 300 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: DOOSAN, aušinimo tipas: vanduo, Ieškote individualiai pritaikytos elektros tinklo avarinės maitinimo sistemos, saugos elektros tiekimo ar pilnai integruotos energetinės sistemos pramonei, verslui, duomenų centrui, ligoninei, žemės ūkiui ar kritinei infrastruktūrai?
Albari Power Systems GmbH projektuoja, gamina ir tiekia individualius avarinio maitinimo įrenginius (NEA), saugos elektros tiekimo sistemas (SV), hibridines energijos sistemas taip pat pilnas energijos centrines pagal kliento reikalavimus.
Nuo atskirų avarinių generatorių iki visiškai automatizuotų mikro-tinklų – viską gaunate iš vienų rankų.
Mūsų paslaugos:
* Dyzeliniai avariniai generatoriai – nuo kVA iki daugiau nei 2 500 kVA vienetui
* Saugos elektros tiekimo sistemos pagal kliento poreikius
* Elektros tinklo avariniai įrenginiai pramonei, ligoninėms, duomenų centrams ir infrastruktūrai
* Izoliuotas (salos) veikimas
* Parazentralinis veikimas su tinklu
* Didžiausios apkrovos valdymas (peak shaving)
* Apkrovos paskirstymas tarp kelių generatorių
* Visiškai automatinė tinklo stebėsena
* Sinchronizacijos sistemos
* Specialiai klientui projektuotos skirstyklos
* Energijos valdymo sistemos (EMS)
Pilnų energijos sistemų integracija:
Mūsų skirstyklos ir energijos valdymo sistemos leidžia sklandžiai integruoti ir visiškai automatiškai valdyti:
* Saulės elektrines (PV)
* Baterijų kaupimo sistemas (BESS)
* Dyzelinius generatorius
* Kogeneracines (BHKW) sistemas
* Viešąjį elektros tinklą
* Vartotojų įrenginius
* Įkrovimo infrastruktūrą
* Pramoninius įrenginius
Kuriame individualias eksploatacines strategijas:
* Savo poreikių optimizavimas
* Avarinio maitinimo užtikrinimas
* Didžiausios apkrovos mažinimas
* Apkrovos valdymas
* Mikro-tinklai
* Izoliuoti elektriniai tinklai
* Hibridinės energijos sistemos
Generatorių įrenginiai tiekiami pagal užsakovo pageidavimus:
* Atvirus modelis
* Garso izoliacija su dengtu gaubtu
* Visiškai laikui atspari konteinerinė versija
* Specialūs konteineriai
* Mobilios energijos centralės
Papildomai galima įsigyti:
* Kuro sistemas
* Dienos talpos kuro bakus
* Automatinės kuro papildymo sistemos
* Nuotolinė stebėsena
* Cloud-monitoringas
* Nuotolinė priežiūra
* SCADA sistemos
* ComAp pagrindu veikiančios valdymo sistemos
* Tinklo analizė ir energijos monitoringas
Komplektacija:
Lrjdpsfn Efxjfx Akvsn
* Inžinerija ir projektavimas
* Gamyba
* Dokumentacija
* Apkrovos bandymai
* Pristatymas
* Montavimas
* Pajungimas
* Paleidimas
* Eksploatacinio personalo apmokymas
Kiekvienas įrenginys projektuojamas ir gaminamas individualiai pagal kliento techninius reikalavimus.
Albari Power Systems GmbH
Jūsų partneris avariniam maitinimui, avarinėms elektros sistemoms, baterijų kaupikliams, energijos valdymo sistemoms ir hibridinėms energijos sistemoms.
Kaina: Pagal užklausą, priklausomai nuo projekto apimties ir techninių sprendimų.
Mažas skelbimas
Lenkija
1 266 km
DMG MORI CMX 1100 V
DMG MORICMX 1100 V
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2017, X ašies eiga: 1 100 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 510 mm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: TNC 620 (3D), veleno greitis (maks.): 12 000 aps./min, ašies variklio galia: 13 000 W, ašių skaičius: 3, Šis 3 ašių DMG MORI CMX 1100 V staklės pagamintos 2017 m. Jis pasižymi įspūdingais ašių poslinkiais: 1100 mm X ašyje, 560 mm Y ašyje ir 510 mm Z ašyje. Staklės yra įrengtos 30 pozicijų įrankių magazinu ir HEIDENHAIN TNC 620 valdymo sistema. Jei ieškote aukštos kokybės apdirbimo galimybių, apsvarstykite galimybę įsigyti mūsų siūlomą vertikalųjį apdirbimo centrą „DMG MORI CMX 1100 V“. Dėl išsamesnės informacijos susisiekite su mumis.
• Darbo laikas:
• Veleno darbo valandos po keitimo: 2 900 val.
• Velenų darbo valandos (mašinos skaitiklis): 32 420 val.
• Įjungimo valandos (skaitiklis): 60 300 val.
• Būklė: Įjungta ir veikia gamybos procese; galima apžiūra (veikimas, geometrija, bendra būklė)
Lredeylkl Topfx Akvjn
• Darbinio stalo matmenys: 1400 × 560 mm
• Ašių dinamika: greitasis poslinkis 30 m/min (linijinės ašys)
• Velenas:
• Įrankio tvirtinimas: DIN 69872
• Įrankių magazinas: 30 vietų grandininis magazinas su dvigubu griebtuvu
• Aušinimas/medžiagos: aušinimo skysčio ir oro perjungimas per M-funkciją (išorinis), drožlių surinkimo dėžė
• CNC valdymas: HEIDENHAIN TNC 620 (3D) su ASCII klaviatūra ir 15 colių monitoriumi
• Matavimo sistemos: Tiesioginės matavimo sistemos (linijinės skalės) X/Y/Z ašyse; matavimo sistemos oro prapūtimas
• Papildomos staklių galimybės:
• Saugios įtampos paketas: X ir Y ašių varikliai su stabdžiais, viršįtampio ribotuvas, žemos įtampos stebėjimas su avarinio sustabdymo mygtuku
• Programinės įrangos galimybės – HEIDENHAIN:
• Pasirinkimas 3 (#21): M120 įrankio spindulio kompensavimas kontūravimui, LOOK AHEAD iki 99 blokų, 3D apdirbimas, M118 rankinio rato pozicionavimas programos vykdymo metu
Papildoma įranga
• Skutiklio tipo drožlių konvejeris (kairėje pusėje)
• Aušinimo skysčio bakas, 250 l
• Rankinis plovimo pistoletas apdirbimo zonai
• 4 spalvų signalinė kolona
• HEIDENHAIN matavimo rinkinys: belaidis ruošinio matavimo zondas ir zondo kalibravimo žiedas
• Rankinis ratukas (nešiojamas valdymo pultas)
Papildoma informacija
• 2024 m. lapkričio mėn. „DMG Service“ įdiegė visiškai naują originalų „DMG“ suklį
• Aptarnavimo ataskaitoje pateikiami tiek veleno matavimų, tiek staklių geometrijos matavimų, atliktų po keitimo, rezultatai
Technical Specification
Taper Size SK 40
Mažas skelbimas
Dortmund
1 157 km
Ciklo valdomas tekinimo staklės
MICROTURNChallenger BNC 26160X
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2007, 1 naudota, labai gerai išsilaikiusi didelio našumo ciklinė tekinimo staklė su FAGOR 8055, 8 pozicijų VDI 40 įrankių bokšteliu, pastoviu pjovimo greičiu ir drožlių transporteriu
Gamintojas: MICROTURN, kilmės šalis Taivanas
Modelis: Challenger BNC 26160X
Metai: 2007
Techniniai duomenys:
Atstumas nuo centros iki pagrindo: 325 mm
Atstumas tarp centrų: 4000 mm
Apsisukimų skaičius virš lovos: 650 mm
Apsisukimų skaičius virš skersinio vežimo: 410 mm
Apsisukimų skaičius išpjovoje: 870 mm
Sūkių diapazonas: 0–2400 aps./min.
Veleno kiaurymė: 82 mm
Veleno variklis: 15 / 22 kW
Staklių matmenys (I x P x A): 6190 x 2096 x 2050 mm
Staklių svoris: 6 800 kg
Lrodpfx Aszfqdnekvon
Priedai / ypatingos savybės:
• Ciklinis valdymas FAGOR 8055 su raidine-klaviatūriniu valdymu
o LCD spalvotas monitorius
o Grafinė ciklų simuliacija
o 2 elektroniniai rankiniai ratukai
• 3 žiuplių griebtuvai
• 8 pozicijų įrankių bokštelis VDI 40
• Žarnyrinis drožlių transporteris
• 2 fiksuotos lunetos
• Automatinis veleno tepimas
• Automatinis išilginio ir skersinio vežimo tepimas
• Konusas su hidrauliškai valdomu įvore
• Aušinimo skysčio sistema
• Žarnyrinis drožlių transporteris
• CE atitiktis
Siegfried Volz Werkzeugmaschinen
Rüschebrinkstr. 151-153
DE - 44143 Dortmund - Wambel / Vokietija
Atraskite daugiau naudotų mašinų
Mažas skelbimas
Karlsbad
1 256 km
Daugiaašė mašina
IndexMS22-6
Skambinti
Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, 6-spindle
Hainbuch Spanntop Axfix D22
ARTIS integrated process monitoring system
Slide units
- Slide unit 1.1: X-axis fixed, Z-axis NC-controlled
- Slide unit 2.1: X-axis fixed, Z-axis NC-controlled
- Slide unit 1.2: X-axis and Z-axis NC-controlled
- Slide unit 2.2: X-axis and Z-axis NC-controlled
- Slide unit 3.1: X-axis and Z-axis NC-controlled
- Slide unit 3.2: X-axis and Z-axis NC-controlled
- Slide unit 4.1: X-axis and Z-axis NC-controlled
- Slide unit 4.2: X-axis and Z-axis NC-controlled
- Slide unit 5.1: X-axis and Z-axis NC-controlled
- Slide unit 5.2: X-axis and Z-axis NC-controlled
- Slide unit 6.1: swivel axis and Z-axis NC-controlled
Lrodpfxjyymbze Akven
- Slide unit 6.2: X-axis and Z-axis NC-controlled
Synchronization device position 6.1
Part ejection via chute
Workpiece conveyor belt at spindle position 6
High-pressure pump
Fire extinguishing system
Coolant filtration system
Hinged belt chip conveyor
Bundle loading magazine: IEMCA SIR MS 22/33 P
Mažas skelbimas
Rosmalen
1 279 km
Apdirbimo centras
BIESSERover 6.40 Conf.1 FT
Skambinti
Būklė: naudotas, Gamybos metai: 2006, galia: 31 kW (42,15 AG), įėjimo įtampa: 400 V, įėjimo srovė: 53 A, įėjimo dažnis: 50 Hz, X ašies eiga: 3 685 mm, Y ašies eiga: 1 575 mm, Z ašies eigos atstumas: 265 mm, ašių skaičius: 3, įrankių magazino lizdų skaičius: 8, bendras svoris: 5 700 kg, Įranga: CE žymėjimas, Biesse Rover C 6.40 Config 1 FT CNC apdirbimo centras
Aprašymas
ROVER C 6.40 FT – skaitmeniniu būdu valdomas apdirbimo centras
Darbo laukai – 1 konfigūracija – X = 3685 mm; Y = 1575 mm; Z = 265 mm
CE saugos įtaisai
FT darbo stalas – matmenys X = 3685, Y = 1560 mm
6 atraminiai taškai su 115 mm eiga galinėje darbo zonoje
6 atraminiai taškai su 115 mm eiga priekinėje darbo zonoje
Lredpfszgwa Sex Akven
4 šoniniai atraminiai taškai su 115 mm eiga (2 kairėje + 2 dešinėje) su pneumatine sistema
Vakuuminė sistema dviems 300 m³/h siurbliams
300 m³/h vakuuminis siurblys
1 konfigūracija
Sudėtis C1-A1
Gręžimo galvutė BH 22 L
LOTE 1
9 kW (12,2 AG) elektrovelenas, HSK F63 adapteris, aušinamas oru
Parengta 360° apdirbimo mazgo (C ašies) įrengimui
Besisukantis įrankių keitiklis su 8 pozicijomis
Sudėtis C1-P1
Automatinė tepimo sistema
Spalvotas LCD monitorius vietoje standartinio LCD
Programinės įrangos atnaujinimas iš BiesseWorks (mašinos versija) į BiesseWorks Advanced (mašinos versija)
BiesseWorks – pažangi programavimo sistema
CE
(Nepaisant mūsų kruopštumo, visi duomenys, techninės specifikacijos ir kainos gali keistis ar būti su klaidomis (rašybos/techninėmis). Už atspausdintus duomenis negalime garantuoti! Galimas pardavimas iki paskelbimo momento.)
Kainos nurodytos be reklamos mokesčio platformoje Machineseeker / Kainos be įkėlimo mokesčio Machineseeker
Geriausios medienos apdirbimo staklės iš Nyderlandų
Mažas skelbimas
Hamburg
917 km
Sraigtinis kompresorius
KaeserSK 25 T
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2016, 2x Screw Compressors, Kaeser, 10 bar, with integrated refrigerant dryer, compressed air receiver, SIGMA AIR MANAGER 4.0 controller – used –:
Price per compressor ex works: €5,950 (net), dismantled, packed and loaded!
Price for the air receiver ex works: €1,450 (net), dismantled, packed and loaded!
Price for the superior controller SIGMA AIR MANAGER 4.0, ex works: €2,500 (net)!
Price for the complete system (2x compressors, 1x air receiver, 1x SIGMA AIR MANAGER 4.0 controller) = only €13,500 (net)!
Manufacturer: Kaeser
Model: SK 25 T
Year of manufacture: 2016
Lsdjzbyd Ropfx Akvjrn
Serial no.: 7201
Material no.: SK.2
Operating hours: unknown, to be provided later
Rated power: 15.0 kW
Motor speed: 2,960 rpm
Max. operating overpressure: 11.0 bar
Dimensions (according to manufacturer's datasheet) W x D x H (mm): 750 x 1240 x 1260
Option K1 T2 C3
Option K1: Special cooling oil filling
Option T2: Transformer / voltage adaptation
Option C3: Connection of the controller (Sigma Control 2) to higher-level process control or remote monitoring systems
Superior controller SIGMA AIR MANAGER 4.0: Controls compressed air stations – for optimum efficiency. Adaptive, efficient and networked – with the SIGMA AIR MANAGER 4.0, demand-oriented compressed air management is redefined.
The compressed air management system orchestrates the operation of multiple compressors as well as dryers or filters with unprecedented efficiency.
Compressed air receiver (data to be verified)
Kaeser, 1000L, permitted operating pressure: 11 bar
Condition: good
Available: from Q4/2026
Location: Hamburg
Mažas skelbimas
Italija
1 266 km
Hurco VM10i
HurcoVM10i
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2016, X ašies eiga: 661 mm, Y ašies eiga: 407 mm, Z ašies eigos atstumas: 508 mm, stalo apkrova: 1 500 kg, veleno greitis (maks.): 10 000 aps./min, ašies variklio galia: 11 000 W, įrankių magazino lizdų skaičius: 24, įrankio svoris: 7 000 g, ašių skaičius: 3, Šis 3 ašių „Hurco VM10i“ staklės pagamintos 2016 m. Jos pasižymi 661 mm X ašies, 407 mm Y ašies ir 508 mm Z ašies eiga. Staklės turi tvirtą 762 x 406 mm dydžio stalą, kurio maksimali apkrova siekia 1 500 kg. Jei ieškote aukštos kokybės apdirbimo galimybių, apsvarstykite galimybę įsigyti mūsų siūlomą vertikalųjį apdirbimo centrą „Hurco VM10i“. Dėl išsamesnės informacijos susisiekite su mumis.
• CNC valdymas: HURCO MAX 5 (programinė įranga „WinMax“, versija V10.01.131.12)
• Stalo matmenys: 762 x 406 mm
• T-formos grioveliai: 3 x 18 mm
• T-formos griovelių tarpusavio atstumas: 10 mm
• Atstumas nuo suklio galo iki stalo: 102–610 mm
• Spindelio sukimo momentas: 72 Nm
• Greitasis poslinkis (X/Y/Z): 28 000 mm/min
• Įrankių magazino talpa: 24 pozicijos
• Maksimalus įrankio skersmuo (gretimos pozicijos užimtos): 80 mm
• Maksimalus įrankio skersmuo (gretimos vietos užimtos): 120 mm
• Maksimalus įrankio ilgis: 250 mm
• Staklių darbo valandos: 15 420 val. 10 min.
• Velenų darbo valandos: 2 727 val. 59 min.
• Monitorius: 19 colių jutiklinis ekranas
• Aparatūra: 128 GB SSD, 4 GB RAM, dviejų branduolių 2,7 GHz procesorius
• Prijungimo galimybės: 2x USB 2.0 (konsolė), 2x USB (elektros spintelė), 1x Ethernet LAN
Papildoma įranga
• Nuotolinis elektroninis rankinis reguliatorius
• Sraigtinio tipo drožlių konvejeris
• Plovimo pistoletas (vanduo/oras)
• Būsenos indikatoriaus lemputė
• Fiksavimo rankenėlės
• Išlyginimo pagalvėlės
Technical Specification
Lrjdpfx Aszgf Htjkvsn
Taper Size ISO 40
Mažas skelbimas
Schorfheide
714 km
Vikšrinis ekskavatorius
SanySY265C
Skambinti
Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 142 kW (193,07 AG), kuro tipas: dyzelinas, bendras svoris: 27 000 kg, tuščias svoris: 27 000 kg, darbinė masė: 27 000 kg, grandinės būklė: 70 procentas, Gamybos metai: 2019, veikimo valandos: 1 650 h, Įranga: UVV saugos patikra, griebtuvo hidraulika, hidraulinis kūjis, kabina, oro kondicionavimas, papildomi žibintai, plieninės vikšrinės grandinės, SANY SY265C CRAWLER EXCAVATOR
Year of manufacture: 2019
Operating hours: approx. 1650
Perfection as the foundation. Efficiency as the benchmark. High-tech creates new dimensions.
EQUIPMENT:
- Cummins engine, Stage IV, approx. 194 HP, 809 Nm, 6,700 cc
- Load sensing hydraulics, max. 2x 246 l/min
- 1st proportional auxiliary control circuit for grab/hammer on joystick 1
- 2nd non-proportional auxiliary control circuit GRL on joystick 2
- Safety holding valves for arm and boom with overload indicator
- Double-acting quick coupler hydraulic circuit
Lsdszcc T Rspfx Akvjrn
- Slew brake
- 2 travel speeds
- Bucket breakout force ISO 187 kN
- Arm tear-out force ISO 130 kN
- ROPS operator cabin
- Boom 5,900 mm, dipper arm 2,950 mm
- Wear strips included as standard equipment!
- (L x H x W) 10,290 x 3,225 x 2,990 mm
- 600 mm steel tracks
- Main battery switch
- Travel alarm and rotating beacon
- Engine emergency stop switch
- 3x LED work lights on cab roof (2x front, 1x rear)
- 1x LED work light on boom
- 1x LED work light on tool box
- 12V power outlet
- Document compartment
- Radio with speaker
- Air conditioning
- Folding front windshield
- 8x auxiliary circuit flow settings via on-board computer with multifunction monitor
- Floor mat
- Cup holder
- Air-suspended seat with fabric cover and seat heating
- Refueling pump
Mažas skelbimas
Kaufungen
1 042 km
Įrankių presetteris
DMGVio 210 Microset
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2013, 1 used tool presetting device
Manufacturer: DMG
Model: Microset Vio 210
Year: 2013
Serial number: 99510021418
Measuring range X-axis: 410 mm
Measuring range Z-axis: 465 mm
Includes workbench, under-table, 1,400 mm wide,
integrated telescopic drawer cabinet with 5 drawers,
comes with 15" Terra monitor, keyboard, mouse, Dymo 450 label printer.
Lrjdpfx Ajqzgw Askven
Mažas skelbimas
Kaufungen
1 042 km
Formos matavimo stotis
PerthenMMQ 40
Skambinti
Būklė: geras (naudotas), 1 used form measuring station
Manufacturer: Perthen
Ljdpfx Akethdkwevorn
Model: MMQ40
Serial No.: 1114
For diameters up to 350 mm
Workpiece length up to 450 mm
For high-precision measurement of form and positional tolerances
Including PC, TFT monitor, keyboard, mouse, table, measurement software, form PC
Scope of delivery: (See picture)
(Subject to changes and errors in the technical data and specifications!)
Mažas skelbimas
Borken
1 181 km
Skenuojantis elektroninis mikroskopas (PC-SEM)
JeolJSM-6490 Bruker XFlash Detektor
Skambinti
Būklė: labai geros būklės (naudotas), Type: Jeol JSM-6490
Jeol JSM-6490 Scanning Electron Microscope (PC-SEM)
Modern, high-resolution, digital scanning electron microscope featuring a newly developed electron optics system and intuitive graphical user interface (GUI) running on Microsoft Windows XP Professional.
Device configuration includes the following features:
- Magnification range: 5X – 300,000X
- Accelerating voltage: 0.3 – 30 kV
- Tungsten hairpin cathode (LaB6 cathode optional)
- Large, fully motorized specimen stage with eccentric tilt function, including graphical navigation on the specimen holder
- Simple specimen navigation via click-center-zoom
- Image field-controlled navigation with 2 navigators
- Relative coordinates navigation
- Saving and recall of specimen positions
- Adjustable image-framing method for the specimen stage
- Image field correction during rotation via computer-controlled eccentric rotation
- Image field correction during tilting via computer-controlled eccentric tilting
- Calculation of possible tilt angle based on specimen geometry
- Automatic focus tracking when moving the specimen in the Z-direction
- Intelligent limit switches for the motorized axes
Specimen stage travel:
x = 125 mm
y = 100 mm
z = 5 to 80 mm (stepless)
T = -10°C to +90°C
R = 360° (continuous)
- Secondary electron detector for high-vacuum operation
- Novel superconic objective lens guarantees maximum image resolution even at high tilt angles
Ljdszd Ufaspfx Akvorn
- Guaranteed resolution in SE image: 3 nm at 30 kV and 15 nm at 1 kV
- Simultaneous live imaging from multiple detectors
- Powerful image measurement functions
- Movie function for recording dynamic processes
- Versatile specimen chamber with numerous upgrade options: free flanges e.g. for EDX, WDX, EBSD, cathodoluminescence etc.
- Low-maintenance and low-wear, quiet pumping system consisting of fore pump, vibration-free high-performance diffusion pump, and electromagnetic valve control
- Comprehensive safety features against incorrect operation and external media failure
- Ergonomic, height-adjustable system table
- SEM starter kit comprising 2 specimen holders, tool kit, and 6 replacement cathodes
Additional equipment for the scanning electron microscope:
- Turbomolecular pump instead of the standard diffusion pump
- When a turbomolecular pump is used, no cooling water is required for SEM operation
Further SEM features:
- PC for SEM control including TFT monitor
- ΟΧ200 Bruker Quantax 200 EDX System EXTENDED
- Bruker EDX software will be transferred to the new owner after purchase!
Nitrogen-free energy-dispersive X-ray analysis system, including:
- SDD detector with 127 eV or better energy resolution
- Detection of all elements from boron upwards
- Vibration-free, maintenance-free. Peltier-cooled (nitrogen-free)
- Pulse processor
- TFT monitor
- Spectrum measurement and element identification
- Fully automatic, quantitative, standardless element analysis
- Image acquisition
- Ultra-fast qualitative line scan
- Ultra-fast qualitative element mapping
- Data management and archiving system
- Report generation and result output
- Data communication
- Installation and training
HyperMap
Multipoint analysis
Bruker xFlash detector (SDD) with SVE III signal processing unit
Scope of delivery: (see photos)
Condition: used
(Specifications may be subject to change or error!)
Mažas skelbimas
Borken
1 181 km
Biologinio saugumo darbo vieta
Thermo Fisher ScientificHerasafe 2030i 1.5
Skambinti
Gamybos metai: 2020, būklė: beveik kaip naujas (naudotas), Here we offer a safety workbench.
The Herasafe 2030i Series of biological safety cabinets leverages years of global leadership in BSC design combined with groundbreaking innovations to optimize contamination control, user-friendliness, and information management, delivering the most technologically advanced Class II cabinets on the market.
Equipped with 'intelligent' safety features for self-monitoring, an intuitive graphical touchscreen user interface, and integrated connectivity for retaining critical performance data, the Herasafe 2030i impresses with its performance and unparalleled precision for demanding cell culture applications and other sensitive tasks requiring the highest level of safety for product, personnel, and environment.
Suitable for work with BSL 1, 2, and 3 pathogens, compliant with EN1822 standards, with dual DC motors, DAVe Plus, SmartFlow Plus, and SmartClean Plus. Features an intuitive touchscreen interface, a working height of 20 cm, electrically operated window, segmented work surface in 30 cm sections, and 316L stainless steel interior.
Ljdpfx Akjzd Udvevjrn
Certified by TÜV Nord according to EN12469. Includes the option of a Thermo manually adjustable base (1.5 m) and a Thermo cross-beam UV lamp.
Dimensions (L x W x H) external: 800 x 1600 x 1536 mm
Dimensions (L x W x H) internal: 627 x 1500 x 780 mm
230 V, 9 A, 2010 W
Type: Herasafe 2030i 1.5
Condition: used / as new
(Subject to technical changes and errors. All information provided without guarantee!)
For further questions, please feel free to contact us by phone.
Mažas skelbimas
Borken
1 181 km
Biologinio saugumo darbo vieta
Thermo Fisher ScientificHerasafe 2030i 1.5
Skambinti
Gamybos metai: 2020, būklė: beveik kaip naujas (naudotas), Here we offer a safety workbench.
The Herasafe 2030i series of biological safety cabinets leverages years of global leadership in BSC design, implementing groundbreaking innovations to optimize contamination prevention, user convenience, and information management—delivering the most technologically advanced Class II cabinets on the market.
Equipped with 'smart' safety features for self-monitoring, an intuitive graphical touchscreen interface, and integrated connectivity for maintaining critical performance data, the Herasafe 2030i impresses with high performance and unrivaled precision for demanding cell culture applications and other sensitive tasks requiring the highest level of protection for product, personnel, and environment.
Lrsdpfezd Udpox Akvsn
Suitable for work with BSL 1, 2, and 3 pathogens, compliant with EN1822 standards, features dual DC motors, DAVe Plus, SmartFlow Plus, and SmartClean Plus.
Includes an intuitive touchscreen interface, 20 cm working opening height, electrically operated front sash, segmented worktop in 30 cm sections, and 316L stainless steel interior.
Certified by TÜV Nord to EN12469. Optionally includes a manually adjustable Thermo base, 1.5 m.
External dimensions (L x W x H): 800 x 1600 x 1536 mm
Internal dimensions (L x W x H): 627 x 1500 x 780 mm
230 V, 9 A, 2010 W
Type: Herasafe 2030i 1.5
Condition: used / like new
(Subject to prior sale and technical modifications; specifications may be subject to change!)
For further questions, please do not hesitate to contact us by phone.
Mažas skelbimas
Borken
1 181 km
3D spausdintuvas
DynamicalToolsDT60
Skambinti
Būklė: labai geros būklės (naudotas), 3D Systems
Lrjdpfx Aszd Tugskvon
Type: DT60
Print Volume: 600 x 450 x 450 mm
External Dimensions: 1265 x 780 x 1725 mm
Precision in Z Axis: 1.25 microns
Precision in X and Y Axis: 7.5 microns
Max. Extruder Temperature: 500 ºC
Max. Build Chamber Temperature: 120 ºC
Nozzle Diameter: 0.6 mm
Other Available Nozzle Diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm
Titanium Thermal Barrier
Two Independent Extruders
Heated Filament Feed
4 Print Modes: SINGLE, DUAL, TWIN, REFLEX
220 - 240 V, 50-60 Hz
Maximum Power Consumption: 3 kW/h
7” LCD Touchscreen
Remote Monitoring
Industry 4.0 Ready: WiFi, Ethernet, HotSpot, USB
MMS System - Modular Maintenance System
Dual Filament Loading
Automatic Filament Change
Heated Feeder
Jam Detection
Filament End Sensor
Print Recovery System
Liquid Cooling
Double Hardened Glass
Base Fixed by Vacuum
High Printing Speed
Positioning Controlled by Encoder
Condition: used
Scope of delivery: (See pictures)
(Sale from site!)
(Specifications subject to change and errors excepted!)
We are happy to answer further questions by phone.
Mažas skelbimas
Borken
1 181 km
Sprogimui atspari temperatūros bandymų kamera
CTST-30/950 Ex/I
Skambinti
Gamybos metai: 2011, būklė: labai geros būklės (naudotas), CTS
Type: T-30/950 Ex/I
CTS Temperature Test Chamber, Explosion-Proof
Control System: 32-bit Controller
LCD Control Panel
Digital display of set and actual values
Numerical input of setpoints
Plain text fault messages
Interface: RS 232
Lrsdpezd Rzwjfx Akvjn
Free switching channels for user-specific test item control
Temperature Testing:
Temperature range: -30°C to +80°C
Temperature deviation: ±0.3 K over time
Temperature change rate:
- Heating: 2 K/min
- Cooling: 1.5 K/min down to -10°C
Radiant heat output: approx. 1000 W at +20°C, approx. 200 W at -25°C
Nitrogen inertization with residual oxygen monitoring:
The test chamber is first purged with a high volume of N2 until the
oxygen content is below 3%. It then switches to a base level supply (approx. 10% of the full purge rate).
Base level nitrogen flow is measured, displayed by a flowmeter, and monitored via a limit switch.
O2 monitoring continuously extracts gas from the test chamber through a flame arrester, directing it to an O2 sensor which checks the residual oxygen content. The gas is then returned to the chamber through a second flame arrester. The exhaust pump is monitored by a volume flow meter. Further details are available in the Dräger manual in the appendix.
The gas system is currently deactivated!
Technical data is based on an ambient temperature of +25°C, nominal voltage 400V, without test item, without radiant load, and without additional equipment.
Dimensions:
Test volume: 950 liters
Test chamber dimensions: approx. 700 mm (H) / approx. 900 mm (W) / approx. 1500 mm (D)
External dimensions: approx. 2400 mm (H) / approx. 1270 mm (W) / approx. 3125 mm (D)
Operating Data:
Electrical connection: 400V +6/-10%, 3/N, 50 Hz
Nominal power: 21.6 kW
Nominal current: 36.5 A
Protection class: IP 54
Condensate drain: non-pressurized, 1/2" internal thread
Sound pressure level: < 62 dB(A)
(measured per DIN EN ISO 3744 at 1m distance from the front)
Weight: approx. 1500 kg, control cabinet approx. 300 kg
External refrigeration unit
Refrigerant: R404A / R23
Important Safety Information for Buyers:
The following steps are carried out in advance on chambers we offer:
1. Functional testing and replacement of necessary components
2. Recharging with legally compliant refrigerant if necessary
3. Leak test with certification
4. After successful inspection, chambers undergo a documented test run.
Condition: used
Scope of delivery: (see picture)
(Subject to changes and errors in technical data. All information provided without guarantee!)
If you have further questions, we are happy to assist you by phone.
Mažas skelbimas
Borken
1 181 km
6 kontūrų temperatūros reguliavimo įrenginys
AutothermAWF 130-27/VK/6K
Skambinti
Būklė: labai geros būklės (naudotas), Autotherm
We are offering you a 6-circuit temperature control unit.
No active chiller included!
According to the attached technical brief:
Temperature range: -40°C … +85°C (extended range -40°C…+130°C)
Increased heating capacity: 27 kW instead of 18 kW
Includes 1x temperature control in the main circuit
Includes 6x temperature measurement in each supply line
Includes 6x temperature measurement in each return line
Includes 6x flow and pressure monitoring in each supply line
Includes 6x flow and pressure control
1 l/min … 12 l/min and 0.1 bar … 3 bar
Including strip control
Including frequency-controlled main circuit pump
Including 6x 3-way valve
Includes 6x additional adjustable bypass valves (2 … 12 bar), preset to 2.4 bar
Includes filling and draining device for all circuits at once
Including 50 l integrated tank
Including pneumatic drain function
Including S7 controller
Energy saving and increased cooling capacity:
An additional glycol circuit integrated into the temperature circuit provides cooling for the consumer in a temperature range from +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C chilled water network. At a supply temperature of +20°C, the cooling capacity is 50 kW.
This improves cooling speed for this temperature range and reduces energy consumption due to shorter compressor running times.
(The footprint of the basic system increases by approx. 0.3 m² as per the data sheet)
Mounted in Rittal bayed control cabinet:
2x TS8 800x1000x2000 mm
1x additional, lockable control cabinet min. 600x600x2000 mm (for control system/electrics)
Supplied via on-site or optional cooling medium supply
Supply temperature, on-site cooling brine -43°C, cooling brine demand 7.5 m³/h continuously regulated
A cooling medium must be connected for cooling performance!
Weight: approx. 1200 kg
Type: Autotherm temperature control unit AWF 130-27/VK/6K
Sale ex location!
Condition: used
Scope of delivery: (see picture)
Lodpfezd Rtysx Akvjrn
(Specifications and information subject to change and error!)
Further questions can be answered by phone.
Mažas skelbimas
Borken
1 181 km
Aparatas atsparumo suvirinimui
HAHN AutomationWiderstandsschweißanlage 1 BDE11154003
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2020, Here we offer you a resistance welding system.
The system is designed for automated resistance welding of the following assemblies:
- Housing + QLT
- Housing + Heater Service Unit P450
- Welding pump + Flange P 800
The machine is manually loaded and unloaded by an operator. Any use other than the use described above is not intended and therefore not permitted!
System layout:
- Welding unit
- Sledge unit
- Cleaning unit for welding electrode
- Base
- Linear unit
- Analysis unit DMC
Dimensions (LxW) mm: 1700 x 1200
Cycle time sec.: ≤ 30 - 35
Technical availability %: ≥ 95
Operator required: 1
Voltage V: 400 AC
Frequency Hz: 50
Control voltage V: 24 DC
Main fuse A: 50
Rated current A: approx. 17
Compressed air supply bar: 6
Lodpfxszd Rmge Akvjrn
Year of manufacture: 2020
System components:
- Control cabinet
- Safety enclosure
- Linear unit
-- Toothed belt axis Festo DGE-25-700-ZR-LKRV
-- Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN
-- Gear ratio i=5
-- Feed constant = 63 mm/rev
-- Reference switch: BES 516-324-G-E5-C-S49
- Sledge unit
-- Balluff BES M08EC-PSC15B-S49G
- Analysis unit DMC: Keyence SR-1000
- Welding unit
-- Horizontal spindle axis
--- Compact Module CKK 110-250 without brake
--- Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN
--- i=1
--- p=5 mm
--- Integrated reference switch: Hall PNP NO
-- Vertical spindle axis
--- Compact Module CKK 110-100 with brake
--- Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN
--- i=1
--- p=5 mm
--- Integrated reference switch: Hall PNP NO
- Welding tongs
-- Crede PSZ-K
- Control unit: ST-T13V2.0
- Power section: LT-L05-T13V13.0 (5,000A)
- Water cooler: DLK 1002-C
- Interface: ProfiNet
- Proportional control valve block PVB V1.0
- Adapter box AB V3.0 for SZ and PSZ
- Extraction unit
-- TBH GmbH GL 265 Z
- Flow monitor
-- Turck GmbH & Co. KG FCS-M18-AP8X
-- Type: BDE11154003
Condition: unused, machine has never been in productive operation
Scope of delivery: (see picture)
(Subject to changes and errors in technical data and specifications!)
Further questions can be answered by telephone.
Mažas skelbimas
Borken
1 181 km
TOX-C rėminis presas, įspaudimo staklės
TOXEMB 030.068.A.001
Skambinti
Būklė: labai geros būklės (naudotas), Here we offer you a TOX insertion press TOX-C-frame press.
TOX Pressotechnik insertion press TOX-C-frame press
Pneumohydraulic manual workstation with process monitoring for the installation of functional elements.
Technical Data:
Press type: EMB 030.068.A.001
Drive: KWE3O.0O.17O.10H
Pneumatic connection: G3/4''
Compressed air preparation: filtered and dried compressed air, max. particle size 40 µm
Air pressure during operation: Pmin. = 3.0 bar, Pmax. = 6.0 bar
Pressing force: 170 kN
Total stroke / effective stroke: 170 mm / 10 mm
Control unit: STE 326-366-3/4"-90-230V/AC special, complete
Electrical connection: 90-230V/AC
Ambient temperature during operation: Tmin. = 10°C, Tmax. = 60°C
Lodpfxozd Rhko Akvern
TOX press-in monitoring: EPW 500FP force / travel measurement
Support device: ZHE for TOX press
Installation dimensions: width 1917.5 mm, height 2506 mm, depth 1917.5 mm
Safety guarding: Leuze B20/B21 light curtain
Press-in tool: see (photos 15 to 18)
Press-in bushing (photo 17): 24.5 mm diameter
Area of application: press-in operations
Weight: 2200 kg
Type: EMB 030.068.A.001
Condition: used
Scope of delivery: (see image)
(Subject to modifications and errors in the technical data and specifications!)
If you have further questions, we are happy to answer them by phone.
Mažas skelbimas
Vokietija
1 229 km
Naudotas EMAG WEISS W11 CNC SL650 metai '20 (IntNo231185)
EMAG WEISSW11_CNC_SL650
Skambinti
Būklė: naudotas, Gamybos metai: 2020, veikimo valandos: 6 875 h, mašinos/transporto priemonės numeris: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal cylindrical grinding machine – Year of manufacture: 2020
For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding applications involving single parts, prototypes, as well as small and medium batch production.
Machine Specifications
Manufacturer: EMAG WEISS
Model: W11-CNC SL650
Year of manufacture: 2020
Operating hours: approx. 6,850 spindle hours / approx. 20,422 total operating hours
Condition: Used, well maintained, immediately available
Technical Data
Control: CNC-controlled (e.g. Heidenhain / Siemens / Fanuc – depending on configuration)
Max. grinding length: 650 mm (between centers)
Center height: approx. 200 mm
External grinding diameter: up to approx. 390 mm
Max. workpiece weight (between centers): approx. 250 kg
Max. workpiece weight (workhead only): approx. 100 kg (MK4)
X-axis travel: approx. 380 mm
Z-axis travel: approx. 1,150 mm
Grinding wheel diameter: 400 – 500 mm (depending on configuration)
Rated power: 9 – 11 kW (approx. 12 – 15 hp)
Peripheral speed: 20 – 50 m/s
Features and Performance
- Windows-based CNC touchscreen operation – convenient programming via conversational interface or DIN/ISO (optional)
- Two-in-one concept: machine operable both conventionally and under CNC control
- High-precision linear and ballscrew guides ensuring top accuracy
- Direct measuring system (glass scales) – optional for many versions
- Automatic grinding wheel dressing with compensation
Lrsdpfxjzcfgmj Akvsn
- Crash control & GAP monitoring for optimum machine and process safety
- Coolant system, emulsion separator, and chip conveyor available (depending on configuration)
- Automation preparation / robot interface possible
The machine can be inspected under power by prior arrangement.
Subject to technical modifications and errors. Prior sale reserved!
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Schijndel
1 280 km
Müller Martini klijavimo įrenginys Corona C15 S/35 (18") (2009)
Müller MartiniCorona C15 S/35 18"
Skambinti
Būklė: naudotas, Gamybos metai: 2009, Perfect binding line
Müller Martini Corona C15 S/35 (18")
Year of manufacture: 2009
Comprising:
Gathering Machine
Müller Martini 3681
Description:
- Chain tensioning station
- Number of gathering stations: 12
- ASIR optical signature recognition: III
- ASAC sheet thickness control
- Stream feeder: 3738 - 10x (yr 08 06 & 03)
- Bundle clamp: Gramatec CL 200 (yr 23)
- Bundle clamp: Gramatec CL 200 (yr 23)
- Portal system: Pfaff (yr 23)
- Pump
- Set-up unit: 3641
- Reject delivery for incomplete products: 3714
- Intermediate unit with vibration: 3643 - 2x
- Transfer to binder
Perfect Binder
Müller Martini Corona C15 S/35 (18")
Year of manufacture: 2009
Description:
- Semi-automatic settings
- Commander with touchscreen
- Main milling station
- 1st spine processing station
- 2nd spine processing station
- Brushing station
- Exclusive dust extraction (machine was connected to a central dust extraction system)
- Drive unit for 1st spine gluing station
- 1st hotmelt spine gluing unit, interchangeable
- Premelter for spine gluing: ICS C80
- Drive unit for 2nd spine gluing station
- 2nd hotmelt spine gluing unit, interchangeable
- 2nd premelter for spine gluing: ICS C160
- Drive unit for side gluing unit
- Hotmelt side gluing unit, interchangeable
- Premelter for side gluing: CLS 30
- Stream cover feeder
- Creasing station
- Pump
- Nipping station
- 2nd nipping station
- Laydown device
Conveyor Section
- Reject delivery for incomplete products
Three-Knife Trimmer
Müller Martini Zenith S (3672)
Description:
- Color monitor with touchscreen
- Semi-automatic settings
- Infeed from the right
- Counter stacker
- Knife presetting device
- Total number of knife sets: 2
- Interchangeable cutting cassettes (standard set): 4 - 17
Book Stacker
Müller Martini CB 16 (3631)
Description:
- Compensating book stacker
Ledpfxsxdx Tno Akvjrn
- Delivery to the left and right
Mažas skelbimas
Trittau
890 km
CNC tekinimo ir frezavimo centras
DMG MORINTX 3000 / 1500
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 111 111 mm, We offer you the following:
Manufacturer: DMG MORI
Model: NTX 3000/1500
Year of manufacture: 2023
Control system: DMG Mori Celos with Fanuc F31iB5
Technical Data:
Max. turning diameter: 670 mm
Turning length: 1,519 mm
Bar capacity: max. 102 mm
Travel ranges:
x1 axis: 675 mm
y axis: +/- 150 mm
z1 axis: 1,562 + 164 mm
b axis: +/- 120°
a axis: 1,542 mm
x2 axis: 200 mm
y2 axis: +/- 40 mm
z2 axis: 1,542 mm
Main Spindle:
Max. speed: 3,000 rpm
Drive power: 30/25 kW
Torque: 1,194/995 Nm
Spindle nose: JIS A2-8
Spindle bore: Ø 111 mm
Sub Spindle:
Max. speed: 4,000 rpm
Drive power: 18.5/18.5/15 kW
Torque: 599/505/409 Nm
Lrodpsy Sfx Nsfx Akvon
Spindle nose: JIS A2-8
Spindle bore: Ø 91 mm
Milling Spindle:
Speed range: 0 – 12,000 rpm
Drive power: 28/23 kW
Torque: 132/95.3 Nm
Tool interface: Capto C6
Number of tool stations: 76 pos.
Max. tool diameter: Ø 70/Ø 130 mm
Max. tool length: 400 mm
Max. tool weight: 8 kg
Turret:
Number of tool holders: 12 pos.
Max. speed of driven tools: 12,000 rpm
Tool interface: BMT40
Torque: 16.9 Nm
Rapid traverse rates:
x axis: 50 m/min
y axis: 40 m/min
z axis: 50 m/min
a axis: 36 m/min
x2 axis: 25 m/min
y2 axis: 18 m/min
z2 axis: 40 m/min
b axis: 100 rpm
Operating hours: approx. 4,500 h
Spindle hours: approx. 2,200 h
Features & Accessories:
- Hydraulic 3-jaw chuck, make SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle
- Hydraulic 3-jaw chuck, make SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for sub spindle
- Foot switch for chuck actuation
- Automatic clamping stroke monitoring of the clamping cylinders for main and sub spindle
- Tailstock function for the sub spindle
- Magazine side control panel for tool magazine
- Coolant: water-soluble coolant
- Chip conveyor (discharge right)
- Coolant temperature control/coolant chiller
- Coolant spray gun
- Float switch for coolant
- Coolant shower at the chucks of main and sub spindle
- Air blow-off system for chuck (sub spindle)
- Oil mist separator zeroGOF #2
- Oil separator
- ICS 70 bar, band filter system TMF300, tank 980 l
- Manual tool presetting device for main and sub spindle
- Direct measuring system on x1, x2, y, z1, z2 axes
- Spindle sensor measuring system with radio transmission, make Renishaw RMP600
- Universal filter
- 3D quickSET
- Alternate speed cycle
- Cycle ‘Tailstock tip on turret’
- MPC cycle – Machine Protection Control
- MVC cycle – Machine Vibration Control
- Synchronous threading without compensation chuck
- Increased input resolution to 0.0001 mm
- Cs control of tool spindle
- Program restart
Accessories, depicted tools and clamping devices are only included in the scope of delivery if expressly stated in the additional information.
Specifications and details are subject to change and errors! Prior sale reserved.
Mažas skelbimas
Borken
1 181 km
Spektrinis fotometras/Infraraudonųjų spindulių mikroskopas
ShimadzuPrestige-21 / mit AIM-8800
Skambinti
Būklė: labai geros būklės (naudotas), Shimadzu
Type: Prestige-21 / with AIM-8800 Infrared Microscope
Shimadzu IR Prestige-21 Infrared Spectrophotometer
The IRPrestige-21 is designed for both highly sensitive and broad applications in research and development.
It makes an excellent addition to the existing FTIR series, which already covers the standard laboratory range.
AIM-8800 Specifications
Optics:
15x Cassegrain objective
15x Cassegrain condenser mirror
with inlet for purging
Lredszdyyispfx Akvsn
MCT Detector:
with liquid nitrogen monitoring system
Wavelength range:
Type 1 - 5000 – 720 cm⁻¹
Type 2 - 5000 – 650 cm⁻¹
Electrically actuated aperture
XY Θ directional drive. XY directional increments can be set to 1 µm over the sample surface and 1° steps in the Θ direction (numerical input possible).
Minimum adjustment value: 3 µm
Motorized XY sample stage
Positioning range: X-axis: 70 mm; Y-axis: 30 mm Resolution: 1 µm spacing
Sample thickness:
Reflection mode - ≤ 40 mm
Transmission mode - ≤ 10 mm
Operation via the main unit's keypad
Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control
(Optional) Control via PC
Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control /
aperture setting / aperture preview / measurement position and recording of aperture setting (10 sample positions, 2 background positions)
Environmental conditions:
Ambient temperature: 15°C ~ 30°C
Humidity: 70% or less
External dimensions, weight:
W410mm x D540 mm x H520 mm x 36kg
Condition: used
Scope of delivery: (See image)
(Specifications are subject to change and errors excepted!)
For further questions, we are happy to assist you by phone.
Mažas skelbimas
Borken
1 181 km
3D spausdintuvas FDM
3D-SystemsProJet 660 Pro
Skambinti
Būklė: labai geros būklės (naudotas), Here we offer you a 3D SYSTEMS 3D printer.
The ZPrinter ProJet 660 Pro 3D printer features a large build volume, allowing for the production of larger models without the need for prior sectioning. In addition, the large footprint increases productivity when printing multiple small models in a single print run.
This is a 3D color printer offering outstanding productivity and color accuracy. The ProJet ColorJet color 3D printers from "3D Systems," also known as ZPrinter, utilize ColorJet (CJP) binder jetting technology to build up layers directly in a powder bed. As a result, even complex and highly detailed prints do not require dedicated support structures, as the loose powder supports the parts during printing and is then semi-automatically recycled.
Applications:
- Visualization of form and design
- Assembly analyses
- Initial functional tests
- Variation testing
- Shape finding
- Design, development, marketing, sales
- Master models for thermoforming
- Dental models
- Presentations
The leading ColorJet color 3D printer in its class for demanding applications, setting new standards for full-color 3D printing systems.
Technical data: ZPrinter ProJet 660 Pro 3D Printer
- Build volume: 254 x 381 x 203 mm
- Colors: 390,000 colors (5 printheads including black)
- Resolution: 600 x 540 dpi
- Minimum feature size: 0.1 mm
- Automation: Fully automated (setup and self-monitoring, automatic powder loading, recycling and removal, snap-in binder cartridges, intuitive control panel)
- Vertical build speed: 28 mm/hour
- Material options: High-performance composite
- Layer thickness: 0.089–0.102 mm
- Number of jets: 1,520
Additional details: ZPrinter ProJet 660 Pro 3D Printer
- Supported file formats: STL, VRML, PLY, 3DS, ZPR
Lrjdpszdyxrsfx Akvjn
- Machine dimensions: 188 x 74 x 145 cm
- Machine weight: 340 kg
- Power requirements: 100–240 V, 1.5–7.5 A
- Workstation compatibility: Windows® 7, Windows® XP Professional, and Windows Vista® Business/Ultimate
- Legal certifications: CE, CSA
- Special installation requirements: None
- Type: ProJet 660 Pro 3D Printer
- Condition: Used
- Scope of delivery: (see image)
(Specifications are subject to change and errors excepted!)
If you have any further questions, we are happy to answer them by phone.
Palengviname jums paiešką: "monitoriai"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.














































































































































































































































