Mikron Vce 800 pirkti naudotą (190)

Gamybos metai: 1990, Sąlyga: labai geros būklės (naudotas), Mikron WF2S universal milling machine with 3-axis Elesta-Visulesta digital readout. Fixed angular table, SK 40 spindle taper. Machine is in very good, operational condition; comes from an institute. Can be demonstrated under power by prior arrangement. Laedpfx Aog Nw Rzjbksk

Gamybos metai: 1995, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 560mm/500mm/400mm, spindle speed: 5,000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3,950mm/2,650mm/2,150mm, weight: approx. 3,000kg, control: Heidenhain TNC 407/415, operating hours: 29,647h. The central lubrication system is showing issues. Documentation available. Inspection on site is possible. Lsdpfx Ajw H At Hsbkoak

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5.47.07.02, padavimo ilgis X ašis: 600 mm, padavimo eiga Y ašimi: 500 mm, padavimo ilgis Z ašis: 450 mm, sukimosi greitis (maks.): 6 300 aps./min, įrankių magazino lizdų skaičius: 44, TECHNICAL DETAILS Drive Power at 44% Duty Cycle: 9 kW Drive Power at 100% Duty Cycle: 6 kW Max. Torque: 52 Nm Processing Spindles (Vertical and Horizontal) Max. Spindle Torque at 44% Duty Cycle: 800 Nm Number of Gear Stages: 4 Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Holder / Pull Stud: SK 40 / DIN 69871 Laodjwm I N Hepfx Abkek Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Operation Longitudinal Movement Spindle Feed (X-axis): 600 mm Transverse Movement Spindle Slide (Y-axis): 500 mm Vertical Movement Spindle Slide (Z-axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y-axis: 0 – 15,000 mm/min Programmable Feed Rate Z-axis: 0 – 12,000 mm/min Rapid Traverse Speed X-/Y-axis: 15,000 mm/min Rapid Traverse Speed Z-axis: 12,000 mm/min Coolant Coolant Tank Capacity: 150 l Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-slots: 4 T-slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Positions: 2 × 22 Tool Diameter: 80 / 130 mm Tool Length (max.): 350 mm Tool Weight (max.): 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20-25 s Tool Change Time: 12 - 16 s MACHINE DETAILS Total Weight with Protective Enclosure: 3,000 kg Total Weight with Cabin Roof: 3,100 kg Environmental Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Nominal Power: 15.8 kW Utilized and Connected Power: 12.3 kW Operating Voltage and Frequency: 3 × 400 V / 50 Hz

Sąlyga: geras (naudotas), Gamybos metai: 2000, Travels: 1350 x 900 x 750 mm Machine control: Heidenhain TNC 426 Equipment: 46-position tool changer, milling spindle SK 40, 12,000 rpm, including coolant-through-spindle system and chip conveyor Glass scales 3D probe: Renishaw MP12 Extensive accessories available on request! Laodpfxji El Ias Abkek Please inquire if interested!

Sąlyga: paruoštas naudoti (naudotas), Parduodama gerai išlaikyta Mikron VC 1000 frezavimo staklė dėl naujos įsigijimo. Lsdjh Tnpxopfx Abkeak

Sąlyga: geras (naudotas), Pilnos charakteristikos yra skelbimo nuotraukose. CNC HEIDENHAIN 426. Staklės puikios mechaninės būklės. Lajdpsxl Htfofx Abkjk

Sąlyga: naudotas, Gamybos metai: 2000, X-axis travel 1000 mm Y-axis travel 1040 mm Z-axis travel 750 mm Control Heidenhain TNC 426 Spindle speed 15,000 rpm Total power requirement 40 kW Machine weight approx. 10.1 t Laodstig D Ijpfx Abkek Space requirement approx. / m Including handwheel and documentation

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1995, Travel X/Y/Z: 710mm/630mm/500mm, Table dimensions X/Y: 1200mm/600mm, Max. table load: 500kg, Tool stations: 22, Tool holder: SK40, Spindle speed: 6,300rpm, Feed rate: 10m/min, Rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2,400mm/3,400mm/2,300mm, Weight: approx. 4,600kg, Control: Heidenhain TNC 426. Includes through-spindle coolant (IKZ) and external cooling. Documentation available. On-site inspection possible. Laedpjw Exr Aofx Abkek

Sąlyga: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Ljdpfx Abst Hw D Rokeak Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2008, veikimo valandos: 3 825 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 214.84.70.265, MIKRON HSM 400 U, 2008 m., labai mažai darbo valandų Ljdpsxg Rvyjfx Abkeak

Sąlyga: naudotas, Gamybos metai: 1980, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 956.71.80.274, padavimo ilgis X ašis: 600 mm, padavimo eiga Y ašimi: 500 mm, padavimo ilgis Z ašis: 400 mm, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 400 mm, įėjimo įtampa: 400 V, Įranga: dokumentacija / vadovas, The equipment shown is in excellent condition and ready for immediate use. No heavy roughing operations have ever been performed with this machine. The machine is supplied together with a vice and an included tool cabinet containing the items shown. Additionally, it comes with 2 sets of ground parallels as well as approximately 80 milling cutters, all in usable condition (some barely used), partially as new, mostly with solid carbide coating, suitable for both steel and aluminum machining. Ljdpfx Aswnq Sgobksak

Sąlyga: geras (naudotas), Būklė: naudota Atsargų numeris: 968859 Būklė: gera Didžiausias skersmuo: 100 mm (4") Didžiausias ilgis: 100 mm (4") Dantų skaičius: 6-400 Didžiausias žingsnis pliene: 15 D.P. 12 stalo apsukų Geometriškai sukalibruota tarp 200 ir 2 400 aps./min. Pajėga: horizontali arba giluminė pjovimo eiga Pagrindinis variklis: 1,5 AG Aušinimo skysčio siurblio variklis: 0,1 AG Hidraulinės sistemos variklis: 0,1 AG Matmenys: 1120x1120x1680 mm Staklių svoris: 500 kg Lsdpfx Aexlabijbkoak

Sąlyga: naudotas, Gamybos metai: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm Table clamping surface 1000 x 500 mm Lasdpfetqqpljx Abkek Spindle taper SK 40 Control HEIDENHAIN TNC 150 Spindle speeds 31.5 - 3150 rpm Feeds - longitudinal/cross/vertical 1 - 3000 mm/min Rapid traverse longitudinal and cross 6 m/min Rapid traverse vertical 4 m/min Quill stroke 110 mm Distance spindle nose to table max. 559 mm Max. table load 500 kg Total power requirement 14 kW Machine weight approx. 3.1 t Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m Accessories: Vertical head with hydraulic tool clamping and extendable quill, fixed table, coolant system

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, Stations: 24, Substations: 20, Side stations: 20, Axes: 2 per station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35mm, Max. workpiece diameter: 25mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335h. Documentation available. An on-site inspection is possible. Lodpfew Emx Rsx Abkeak

Sąlyga: naudotas, Gamybos metai: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors, ex-stock, without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Type WF 2/3 S Year of manufacture approx. 1981 21S0401 Lsdpfx Abju U Sabskeak _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special equipment: • HEIDENHAIN 2-axis digital readout for longitudinal and cross axis • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels for all 3 axes for sensitive manual movement • Vertical head (swiveling +/- 90°) with quill and swing-out device for using the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindles • Fixed angle table 450 x 800 mounted • Built-in coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories including tool holders, horizontal milling equipment with various horizontal arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table changing device This machine is still a “real” Mikron milling machine and was made in tried-and-tested Swiss quality. This machine is ideally suited for both toolmaking and training purposes. Condition: Very good condition! Used only for toolmaking. Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net - after receipt of invoice We always have a selection of universal and CNC milling machines of all kinds in stock – Please feel free to ask about alternatives!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing table machine MIKRON MULTISTAR CX 24 The machine can be inspected under power. Part feeding is not an issue. Equipped with MITSUBISHI AACPU-S1 control – Year of manufacture: 1996 – Detailed technical data as per attachment – The machine can be inspected while cutting. Modification – installation – commissioning – application can be offered. Pricing: ex location, unpacked, uninsured. Delivery time: immediately – subject to prior sale. Technical data non-binding – errors excepted. Lajdpfxet I T N Eo Abkok Payment: As customary for used machinery, strictly net payment before collection.

Sąlyga: geras (naudotas), Mikron WF 32 CH Universal Milling Machine Machine with chip and splash guard enclosure Equipped with a Heidenhain TNC355 CNC control Technical Specifications Manufacturer: Mikron Model: WF 32 CH Control: Heidenhain TNC355 Lasdpfx Aowit Rhsbkjk Travel (axes): X 560 mm / Y 500 mm / Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min; Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg You can find more items—new and used—in our shop! International shipping costs available on request!

Sąlyga: geras (naudotas), ⚙️ Mikron Gear Hobbing Machine Type 132-02 (M23) – Now available at our facility in Ireland: a Mikron Gear Hobbing Machine Type 132-02 (M23) in very good condition. This precision Swiss-made machine is ideal for small gear production, tool rooms, and manufacturers seeking reliable, high-accuracy gear cutting capabilities. Mikron is renowned for its robust construction and long-lasting performance in gear hobbing applications, making it an excellent solution for cutting spur gears, helical gears, and splines with consistently high precision. Condition Used Stock number Lajdpfx Aoxlabcebksk 968859 Status Good Maximum diameter 100mm (4") Maximum length 100mm (4") Number of teeth 6-400 Maximum pitch in steel 15 D.P. 12 table feeds Geometrically calibrated between 200 and 2,400 rpm Feed Horizontal or plunge cut Main motor 1.5 HP Coolant pump motor 0.1 HP Hydraulic system motor 0.1 HP Dimensions 1120x1120x1680mm Machine weight 500kg

Sąlyga: naudotas, Gamybos metai: 1998, X-axis travel: 710 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Table clamping surface: 1100 x 585 mm Rotary table diameter: 500 mm Lsdpfx Abstz Sqhokjak Spindle taper: SK 40 Spindle speeds: 5 - 6300 rpm Spindle power: 11 kW Number of tool magazine positions: 2 x 22 Control: HEIDENHAIN TNC 426 Total power requirement: 20 kW Machine weight approx. 5.8 t Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system

Sąlyga: naudotas, Gamybos metai: 1997, X travel: 710 mm y travel: 630 mm z travel: 500 mm Spindle speed range: 5 - 5,000 rpm Main spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping surface: 1,200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Machine weight approx.: 4.24 t Laedslu N Hiepfx Abksk Equipped with Heidenhain TNC 426 control, 44-position tool changer, all axes with box ways, guides protected by wipers and steel covers. Heidenhain wired handwheel for easy machine setup.

Sąlyga: naudotas, Gamybos metai: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Laodpst Hwxbsfx Abkok Module – min. (not specified) Total power requirement 20 kW Machine weight approx. 6 t Space requirement approx. (not specified) CNC-controlled horizontal hobbing machine with workpiece portal loader, model A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter with automatic loading max. 150 mm Workpiece diameter with manual loading max. 200 mm Max. workpiece length approx. 400 mm Axial milling length (Z axis) 300 mm Module range for HSS/Carbide cutters 3 / 4.5 mm Number of teeth min./max. 2–999 Centre distance tool–workpiece min./max. 0–190 mm Workpiece rotation speed max. 0–350 rpm Milling slide swiveling left/right 50 / 60° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y axis) 100 mm Radial slide travel max. (X axis) 10–150 mm Tailstock travel max. (W axis) 420 mm Cutter speed stepless 0–1,500 rpm Feed range on all axes steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total power approx. 20 kW – 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment: MIKRON CNC control type 788 (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with conversational programming for creating various gearing cycles, such as helical gearing, worm and worm wheel gearing, crowned gears, with and without shifting, as well as further subprograms. Heavy duty shifting milling head with high cutter speeds and long shifting path, also for 2 cutters, with quick-change system and hydraulic counterbearing. Workpiece spindle head (C) with quick-change system (collet chuck) Heavy tailstock with 420 mm travel (W), in combination with an automatic workpiece loading device from GÜDEL Switzerland with a linear portal loader (approx. 1000 mm stroke (V)), swiveling double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm length x 25 mm Ø x module 1.5), however, without workpiece storage device. Separate coolant unit with magnetic chip conveyor Enclosed full machine guarding with sliding doors 2 machines with workpiece marking devices by BORRIES, unfortunately otherwise without accessories.

Sąlyga: naudotas, Control: Heidenhain TNC 155 Laedpfsc Tt Hrsx Abksk Tool holder: SK 40 Quill stroke: 110 mm Table size: 1000 x 500 mm Travel paths: X - 710 mm, Y - 500 mm, Z - 460 mm Spindle speed: 31.5–3150 rpm Accessories: Angle table, coolant system, various tool holders

Sąlyga: geras (naudotas), Mikron WF31D Precision Milling and Drilling Machine Machine with chip and splash guard enclosure Equipped with a Heidenhain TNC355 controller Technical Specification Ledpfjwiucfjx Abksak The WF 31 D is a precision milling and drilling machine suitable for series production and CNC training. Drive via an automatically switchable stepped gearbox and Poly-V belt. Vertical spindle extendable by 90 mm; conversion from vertical to horizontal machining possible. Ball screw drives with DC motors enable simultaneous feed movements. Guideways are protected against dust, chips, and coolant. Technical Data Manufacturer: Mikron Model: WF31D Control system: Heidenhain TNC 355 Longitudinal travel (X): 560 mm Cross travel (Y): 500 mm Vertical travel (Z): 400 mm Drive power: 3.3/4.0 kW Speed range: 40–4000 rpm Feed rate: 2–3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min Electrical Equipment Total installed nominal power: 10.0 kW Installed useful power: 7.3 kW Operating voltage: 3 x 380 V – 50/60 Hz Protection class: IP 54 Max. permissible ambient temperature: +35°C Relative humidity: 75% Dimensions and Weights Width: 2450 mm Length: 2800 mm Height: 2000 mm Net weight of the machine: approx. 2570 kg You will find more new and used items in our shop! International shipping costs upon request!

Sąlyga: naudotas, Gamybos metai: 1980, X-travel: 500 mm Y-travel: 500 mm Z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Infinitely variable feed rates: 1 - 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Lasdpfxscxxq De Abkok Equipped with Heidenhain TNC 131 CNC control, swiveling device for vertical head, coolant system, separate drive for each feed axis, automatic hydraulic clamping of all axes, working axis is automatically released, all axes can be released for manual operation.

Sąlyga: naudotas, Gamybos metai: 1989, mašinos/transporto priemonės numeris: 6766, X-travel: 560 mm Y-travel: 500 mm Z-travel: 400 mm Table size: 900 x 530 mm Control: Heidenhain TNC 355 B/Q Tool holder: ISO 40 / M 16 Spindle speed range: 40 - 4000 rpm Rapid traverse X axis: 6 m/min Rapid traverse Y axis: 6 m/min Rapid traverse Z axis: 5 m/min Infinitely variable feed X/Y/Z: 2 - 3000 mm/min Ledpfxscxxpqs Abkoak Total power requirement: 9 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.6 x 1.8 x 2.2 m with MIKRON SMP (160 mm 3-jaw chuck) mounted on table, splash guard enclosure, coolant pump, work light