Mikron Vce 800 Pro pirkti naudotą (193)

Sąlyga: paruoštas naudoti (naudotas), Parduodamos penkios senesnės Mikron srieginių frezavimo staklės: 3x hidraulinės volinės frezavimo staklės Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 ir 1x trumpųjų sriegių frezavimo staklės Mikron 106.01. Galima apžiūra vietoje. Cedpow Sxyxefx Af Tegn

Sąlyga: paruoštas naudoti (naudotas), Speed: 3150 rpm, Travel X/Y/Z: 710mm/500mm/500mm, Number of spindle speeds: 21, Feed rate: 2000 mm/min, Spindle taper: ISO40/M16, Distance from milling head to table: 559 mm, Table size X/Y: 500mm/1000mm, T-slot spacing: 63 mm, Max. workpiece weight: approx. 500 kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, Weight: approx. 3300 kg, Control: Heidenhain TNC 155. Documentation available. Cgjdpfx Astuwk Uef Ton

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, Stations: 24, Substations: 20, Side stations: 20, Axes: 2 per station, Collets: 24, Production output single/double cycle: 120/240 pcs/min, Stroke: 35mm, Max. workpiece diameter: 25mm, Spindle speed: 20,000 rpm, Machine weight: approx. 2,650kg, Control system: Mikron MAC 50, Operating hours: approx. 17,335h. Documentation available. An on-site inspection is possible. Cgedpfxsw Emx Rj Af Tsn

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1995, Travel X/Y/Z: 710mm/630mm/500mm, Table dimensions X/Y: 1200mm/600mm, Max. table load: 500kg, Tool stations: 22, Tool holder: SK40, Spindle speed: 6,300rpm, Feed rate: 10m/min, Rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2,400mm/3,400mm/2,300mm, Weight: approx. 4,600kg, Control: Heidenhain TNC 426. Includes through-spindle coolant (IKZ) and external cooling. Documentation available. On-site inspection possible. Codpfew Exr Aox Af Tjgn

Gamybos metai: 1995, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 560mm/500mm/400mm, spindle speed: 5,000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3,950mm/2,650mm/2,150mm, weight: approx. 3,000kg, control: Heidenhain TNC 407/415, operating hours: 29,647h. The central lubrication system is showing issues. Documentation available. Inspection on site is possible. Cgodpfx Afew H At Ho Ten

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5.47.07.02, padavimo ilgis X ašis: 600 mm, padavimo eiga Y ašimi: 500 mm, padavimo ilgis Z ašis: 450 mm, sukimosi greitis (maks.): 6 300 aps./min, įrankių magazino lizdų skaičius: 44, TECHNICAL DETAILS Drive Power at 44% Duty Cycle: 9 kW Drive Power at 100% Duty Cycle: 6 kW Max. Torque: 52 Nm Processing Spindles (Vertical and Horizontal) Cgsdpfx Aowm I N Hef Ten Max. Spindle Torque at 44% Duty Cycle: 800 Nm Number of Gear Stages: 4 Adjustable Speed Range (vertical and horizontal): 10 – 6,300 rpm Tool Holder / Pull Stud: SK 40 / DIN 69871 Max. Tool Weight: 13 kg Tool Diameter: 130 mm Pull-in Force: 10,000 N Ejection Force: 3,500 N Travel Paths in Automatic Operation Longitudinal Movement Spindle Feed (X-axis): 600 mm Transverse Movement Spindle Slide (Y-axis): 500 mm Vertical Movement Spindle Slide (Z-axis): 450 mm Feed Drive (AC) Programmable Feed Rate X / Y-axis: 0 – 15,000 mm/min Programmable Feed Rate Z-axis: 0 – 12,000 mm/min Rapid Traverse Speed X-/Y-axis: 15,000 mm/min Rapid Traverse Speed Z-axis: 12,000 mm/min Coolant Coolant Tank Capacity: 150 l Flow Rate: approx. 20 l/min Noise Emission Sound Power Level: 75 dB(A) Clamping Table Table Size: 530 × 900 mm Number of T-slots: 4 T-slot Width: 14 H7 Table Load Capacity: 400 kg Tool Changer TCD 44 Tool Positions: 2 × 22 Tool Diameter: 80 / 130 mm Tool Length (max.): 350 mm Tool Weight (max.): 6 kg Max. Workpiece Weight in Drum Magazine: 200 kg Chip-to-Chip Time: 20-25 s Tool Change Time: 12 - 16 s MACHINE DETAILS Total Weight with Protective Enclosure: 3,000 kg Total Weight with Cabin Roof: 3,100 kg Environmental Conditions Max. Permissible Ambient Temperature: 35 °C Max. Permissible Relative Humidity: 75 % Electrical Connection Data Total Installed Nominal Power: 15.8 kW Utilized and Connected Power: 12.3 kW Operating Voltage and Frequency: 3 × 400 V / 50 Hz

Sąlyga: labai geros būklės (naudotas), MIKRON WF 3 DP Universal Milling Machine Cgodolnfggopfx Af Tsn TECHNICAL DATA Swivelling Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling spindle drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step increment: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed drive Feeds in all 3 axes: steplessly adjustable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travel distances Longitudinal travel of the clamping table (X-axis): automatic: 400 mm Cross travel of the clamping table (Y-axis): automatic: 400 mm Vertical travel of the clamping table (Z-axis): automatic: 385 mm We do not assume any liability for the correctness, completeness, or currentness of the information provided.

Gamybos metai: 2005, Sąlyga: labai geros būklės (naudotas), MIKRON HSM 400 U High-Speed Machining Center The exact scope of delivery can be seen in the photo gallery. Included, among others, are: touch probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, belt filter system, approx. 50 HSK tool holders, etc. 1. TECHNICAL DATA Working area X-axis: 400 mm Y-axis: 450 mm Z-axis: 350 mm B-axis: ±110° C-axis: 360° Spindle Speed range: 100 – 42,000 rpm Tool interface: HSK E 40 Spindle power at 40% duty cycle: 13 kW Spindle power at 100% duty cycle: 10 kW Torque at 60% duty cycle: 4.25 Nm Torque at 100% duty cycle: 3.2 Nm Lubrication: oil/air Feed Rapid traverse rate: max. 40 m/min B-axis: 150 rpm C-axis: 250 rpm Axis acceleration XYZ: max. 1g (10 m/s²) B-axis: 100 rad/s² C-axis: 300 rad/s² Tool changer: 68 positions Chip-to-chip time: 12.5 s Tool change time: 10.0 s Worktable: 120 mm Cgedpfx Aeigrf Ijf Ton Max. workpiece diameter for 360° rotation: 230 mm Max. workpiece height: 350 mm Max. workpiece weight: 25 kg Control: Heidenhain iTNC 530 Weight: 5,500 kg No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Gamybos metai: 1987, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 152.41.74.002, Table clamping surface: 500 x 1000 mm Travel path x: 630 mm Travel path y: 500 mm Travel path z: 460 mm Quill stroke (manual): 45 mm Spindle taper: ISA 40 Spindle speeds: 31.5 – 3,150 rpm Feed rates, infinitely variable: 1 – 3,000 mm/min Rapid traverse: x/y 6 m/min, z 4 m/min Electrical connection: 380 V, 6/8 kW Space requirement: 1,800 x 2,120/2,600 x 2,020 mm Weight: 3,100 kg Control: HEIDENHAIN, TNC 155 Cgsdpe H I Hdsfx Af Ten

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Heidenhain iTNC 530, darbinis plotas X 600 x Y 450 x Z 450 mm, veleno tvirtinimas CAT40, 24 pozicijų automatinis įrankių keitiklis, 20 000 aps./min. velenas, staklių svoris 6 100 kg, prijungimo galia 16 kW, pagrindinė saugiklis 32 A, darbinė įtampa 400 V, 50/60 Hz Codow Hxzmopfx Af Togn

Sąlyga: paruoštas naudoti (naudotas), Parduodama gerai išlaikyta Mikron VC 1000 frezavimo staklė dėl naujos įsigijimo. Cjdpfx Afeh Tnpxe Togn

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: KU 4165M, X ašies eiga: 572 mm, Y ašies eiga: 322 mm, Z ašies eigos atstumas: 265 mm, sukimosi greitis (maks.): 15 000 aps./min, įrankių magazino lizdų skaičius: 22, The value of the delivered spare parts amounts to approx. €70,000 TECHNICAL DETAILS Codpexamh Eofx Af Tsgn Loading modules: 1 module Machining modules: 3 modules Number of spindles: 6 Control System: Bosch Rexroth MTX Part program size: unlimited Remote diagnostics: available Programming: ISO code, simulation via CAM software EdgeCAM Workpiece transport and loading system Loading system: parallel to main time, manual, with 3-axis handling or robot Part feeding: paternoster / stack magazine Workpiece change (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed force X: 1,100 N Feed force Y1/Y2: 1,100 N Feed force Z: 2,500 N B-axis rotational speed: 1,000 rpm C-axis rotational speed: 500 rpm B-axis acceleration: 52 rad/s² C-axis acceleration: 90 rad/s² B-axis torque (clamped): 1,000 Nm B-axis torque (unclamped): 287 Nm C-axis torque (clamped): 300 Nm C-axis torque (unclamped): 187 Nm Working spindle Tool holder: HSK 40-A Outer diameter: 108 mm Rotational speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece clamping Clamping system: EROWA clamping system Operation: pneumatic, 6 bar Tool changer Tool discs: externally pre-settable with position coding, diameter: Ø 290 mm Tools (2 discs with 12 positions) per machining module: 22 Tool disc weight: 5 kg Max. tool weight: 2.5 kg Max. free tool length: 186 mm Max. tool diameter: 63 mm Max. tool diameter with free space: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. total tool weight per disc: 15 kg Positioning time per tool step: 250 ms Tool holder: HSK 40-A, acc. to DIN 69893 MACHINE DETAILS Machine dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per machining module: approx. 4.5 t Weight per loading module: approx. 2.5 t

Sąlyga: geras (naudotas), Gamybos metai: 1972, Ratų skersmuo – maks. 80 mm Ratų plotis 60 mm Modulis – maks. 3 Modulis – min. 0,1 Csdpsw N S D Ssfx Af Tsgn Bendras galios poreikis 0,4 kW Mašinos svoris apie 120 kg Reikalinga erdvė apie 0,6x0,6x0,75 m Mašina skirta nedidelių kūginių / tiesių krumpliaračių šlifavimui. Kūginių krumpliaračių frezavimui naudojama Mikron 102.01.

Sąlyga: geras (naudotas), Gamybos metai: 1991, Machine weight approx. 6 t The base machine design is characterized by the following features: - Horizontal orientation of the workpiece spindle; vertical orientation of the milling spindle or milling head - Workpiece clamping is between the workpiece spindle head (left) and the tailstock (right) - The radial slide is mounted on the machine base (X-axis) - The axial slide travels on the radial slide (Z-axis) - The shift milling head is equipped with automatic angular adjustment (A-axis); the shift slide (Y-axis) moves tangentially to the workpiece diameter - CNC controlled - IBH control system - Loading device - Extensive accessories Technical specifications: - Maximum module for gear hobbing with hobs according to DIN 8002: 4.5 mm - Maximum module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Maximum workpiece diameter with manual loading: 200 mm - Maximum workpiece diameter with automatic loading: 150 mm - Maximum workpiece length: 400 mm - Maximum / minimum cutter diameter: 102/40 mm - Maximum cutter length: 230 mm - Maximum / minimum cutter arbor diameter (standard): 32/16 mm - Axial slide travel = maximum milling length, Z-axis: 300 mm - Radial slide travel, X-axis: 140 mm - Cutter traverse (shift travel) Y-axis: 100 mm - Tailstock travel W-axis: 420 mm - Swivel angle shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 100 - 150 mm - Y-axis (milling spindle face): 50 - 230 mm - W-axis (tailstock spindle face): 165 - 585 mm - Cutter speed range, standard B-axis: 0 - 1500 rpm - Workpiece speed, C-axis: 0 - 350 rpm Feed rates: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min Codeub Amfepfx Af Tjgn - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (portal loader): 80,000 mm/min

Sąlyga: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Codpet Hw D Rsfx Af Tjgn Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.

Sąlyga: naudotas, Gamybos metai: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors, ex-stock, without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Type WF 2/3 S Year of manufacture approx. 1981 21S0401 _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special equipment: • HEIDENHAIN 2-axis digital readout for longitudinal and cross axis • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels for all 3 axes for sensitive manual movement • Vertical head (swiveling +/- 90°) with quill and swing-out device for using the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindles • Fixed angle table 450 x 800 mounted • Built-in coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories including tool holders, horizontal Cgedpeu U Sabjfx Af Tjn milling equipment with various horizontal arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table changing device This machine is still a “real” Mikron milling machine and was made in tried-and-tested Swiss quality. This machine is ideally suited for both toolmaking and training purposes. Condition: Very good condition! Used only for toolmaking. Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net - after receipt of invoice We always have a selection of universal and CNC milling machines of all kinds in stock – Please feel free to ask about alternatives!

Sąlyga: naudotas, Gamybos metai: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. (not specified) Total power requirement 20 kW Machine weight approx. 6 t Space requirement approx. (not specified) CNC-controlled horizontal hobbing machine with workpiece portal loader, model A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter with automatic loading max. 150 mm Workpiece diameter with manual loading max. 200 mm Cjdpfst Hwxbsx Af Togn Max. workpiece length approx. 400 mm Axial milling length (Z axis) 300 mm Module range for HSS/Carbide cutters 3 / 4.5 mm Number of teeth min./max. 2–999 Centre distance tool–workpiece min./max. 0–190 mm Workpiece rotation speed max. 0–350 rpm Milling slide swiveling left/right 50 / 60° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y axis) 100 mm Radial slide travel max. (X axis) 10–150 mm Tailstock travel max. (W axis) 420 mm Cutter speed stepless 0–1,500 rpm Feed range on all axes steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total power approx. 20 kW – 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment: MIKRON CNC control type 788 (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with conversational programming for creating various gearing cycles, such as helical gearing, worm and worm wheel gearing, crowned gears, with and without shifting, as well as further subprograms. Heavy duty shifting milling head with high cutter speeds and long shifting path, also for 2 cutters, with quick-change system and hydraulic counterbearing. Workpiece spindle head (C) with quick-change system (collet chuck) Heavy tailstock with 420 mm travel (W), in combination with an automatic workpiece loading device from GÜDEL Switzerland with a linear portal loader (approx. 1000 mm stroke (V)), swiveling double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm length x 25 mm Ø x module 1.5), however, without workpiece storage device. Separate coolant unit with magnetic chip conveyor Enclosed full machine guarding with sliding doors 2 machines with workpiece marking devices by BORRIES, unfortunately otherwise without accessories.

Sąlyga: naudotas, Gamybos metai: 1997, Technical details: X-axis travel: 710 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Spindle speed range: 5 - 5,000 rpm Drive power – working spindle: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping surface: 1,200 x 600 mm Table load capacity: 0.5 t Csdevb Hzrspfx Af Tsgn Total connected load: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, 44-position tool changer, flat guides on all axes, guides protected with wipers and steel covers. Heidenhain wired electronic handwheel for easy machine setup.

Sąlyga: geras (naudotas), Gamybos metai: 2001,

Sąlyga: naudotas, Gamybos metai: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm Table clamping surface 1000 x 500 mm Spindle taper SK 40 Control HEIDENHAIN TNC 150 Spindle speeds 31.5 - 3150 rpm Cgsdpfotqqpljx Af Ten Feeds - longitudinal/cross/vertical 1 - 3000 mm/min Rapid traverse longitudinal and cross 6 m/min Rapid traverse vertical 4 m/min Quill stroke 110 mm Distance spindle nose to table max. 559 mm Max. table load 500 kg Total power requirement 14 kW Machine weight approx. 3.1 t Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m Accessories: Vertical head with hydraulic tool clamping and extendable quill, fixed table, coolant system

Sąlyga: naudotas, Gamybos metai: 1998, X-axis travel: 710 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Table clamping surface: 1100 x 585 mm Rotary table diameter: 500 mm Spindle taper: SK 40 Spindle speeds: 5 - 6300 rpm Spindle power: 11 kW Number of tool magazine positions: 2 x 22 Control: HEIDENHAIN TNC 426 Cjdpfxetz Sqhs Af Tjgn Total power requirement: 20 kW Machine weight approx. 5.8 t Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing table machine MIKRON MULTISTAR CX 24 The machine can be inspected under power. Part feeding is not an issue. Equipped with MITSUBISHI AACPU-S1 control – Year of manufacture: 1996 – Detailed technical data as per attachment – The machine can be inspected while cutting. Modification – installation – commissioning – application can be offered. Pricing: ex location, unpacked, uninsured. Codpfxet I T N Ee Af Togn Delivery time: immediately – subject to prior sale. Technical data non-binding – errors excepted. Payment: As customary for used machinery, strictly net payment before collection.

Sąlyga: geras (naudotas), Mikron WF31D Precision Milling and Drilling Machine Machine with chip and splash guard enclosure Equipped with a Heidenhain TNC355 controller Technical Specification The WF 31 D is a precision milling and drilling machine suitable for series production and CNC training. Drive via an automatically switchable stepped gearbox and Poly-V belt. Vertical spindle extendable by 90 mm; conversion from vertical to horizontal machining possible. Ball screw drives with DC motors enable simultaneous feed movements. Guideways are protected against dust, chips, and coolant. Technical Data Manufacturer: Mikron Model: WF31D Control system: Heidenhain TNC 355 Longitudinal travel (X): 560 mm Cgodowiucfopfx Af Ton Cross travel (Y): 500 mm Vertical travel (Z): 400 mm Drive power: 3.3/4.0 kW Speed range: 40–4000 rpm Feed rate: 2–3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min Electrical Equipment Total installed nominal power: 10.0 kW Installed useful power: 7.3 kW Operating voltage: 3 x 380 V – 50/60 Hz Protection class: IP 54 Max. permissible ambient temperature: +35°C Relative humidity: 75% Dimensions and Weights Width: 2450 mm Length: 2800 mm Height: 2000 mm Net weight of the machine: approx. 2570 kg You will find more new and used items in our shop! International shipping costs upon request!

Sąlyga: geras (naudotas), Mikron WF 32 CH Universal Milling Machine Machine with chip and splash guard enclosure Equipped with a Heidenhain TNC355 CNC control Technical Specifications Manufacturer: Mikron Model: WF 32 CH Control: Heidenhain TNC355 Travel (axes): X 560 mm / Y 500 mm / Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min; Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg Csdpfxjwit Rhe Af Tjgn You can find more items—new and used—in our shop! International shipping costs available on request!

Sąlyga: naudotas, Gamybos metai: 1980, X-travel: 500 mm Y-travel: 500 mm Z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Infinitely variable feed rates: 1 - 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Equipped with Heidenhain TNC 131 CNC control, swiveling device for vertical head, coolant system, separate drive for each feed axis, automatic hydraulic clamping of all axes, working axis is automatically released, all axes can be released for manual operation. Cgjdpecxxq Dsfx Af Tsn