Mep Tiger 300 pirkti naudotą (113)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Aktualumas
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Nurodyta data
- Seniausi skelbimai
- Nurodyta data
- Trumpiausias atstumas
- Atstumas
- Didžiausias atstumas
- Atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Naujinta paskutinį kartą
- Seniausias atnaujinimas
- Naujinta paskutinį kartą
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- Modelis
- Modelis nuo Z iki A
- Modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- Aktualumas
- Aktualumas
MEP
Mažas skelbimas
Vokietija
999 km
Juostinis pjūklas - horizontalus
MEPShark 281 CCS
Skambinti
Sąlyga: naujas, Cutting diameter 250 mm
Saw blade length 2950 x 27 x 0.9 mm
Table height approx. 800 mm
Blade speed 36/72 m/min
Total power requirement 1.5/1.8 kW
Machine weight approx. 0.37 t
Space requirement approx. ... m
MEP Sawing Machine:
Saw bow, vice unit, and base made of heavy-duty cast iron
Precision angle scale on the cast iron frame
Bcedefg E H Ijpfx Abfsu
Electrical system (with fully labeled wiring and 24 V low voltage system)
Control handle IP 55 for manual cycles (if available)
Rotating chip removal brush for the saw blade
Quick-approach clamping unit with vice
Accurate adjustable stops for mitre cuts at 0°, 45°, and 60° to the left
Bi-metal saw blade 2950 x 27 x 0.9 mm
Wrench, operating instructions, and spare parts order instructions in the user's language
SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting by automatic head feed via gravity.
CCS (Cut Control System) with (A) switch for manual and automatic cut – (B) cutting speed regulation – (C) hydraulic brake with tank – (D) end stop for stopping the blade, also available as an option for previously delivered machines.
Quick-adjust vice
Hydraulic converter for blade tension indication
Electric coolant pump for cooling and lubricating the saw blade and easily accessible coolant tray above the base
On models with pneumatic vice (MA), opening and closing of the vice is performed via a manual valve (optional pedal control available)
Mažas skelbimas
Vokietija
999 km
Juosta pamačiau - Automatinis - horizontali
MEPSHARK 350 CNC HS 4.0
Skambinti
Sąlyga: naujas, Cutting diameter round: 355 mm
Cutting diameter square: 350 x 350 mm
Saw band dimensions: 4640 x 34 x 1.1 mm
Band speed: 15 - 115 m/min
Total power requirement: 5.5 kW
Machine weight: approx. 2.8 t
Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m
Automatic electromechanical band saw in dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm.
Standard equipment includes:
- Powered chip conveyor, mountable on either the right or left side of the machine.
Bodpfx Aofm T Hbobfecu
- Clamping pressure regulation of the machine vices.
- Feeder with vertical rollers for lateral material support.
- Sensors for material start detection.
- Clamping pressure regulation.
- Storage for up to 300 programs.
- The machine is available with either a 34 mm or 41 mm blade at no extra cost.
Price on request.
Mažas skelbimas
Vokietija
999 km
Automatinis juostinis pjūklas - horizontalus
MEPSHARK 350 NC HS 5.0
Skambinti
Sąlyga: naujas, Cutting diameter round: approx. 355 mm
Cutting diameter square: 350 x 350 mm
Saw blade length: 4640 x 34 x 1.1 mm
Table height: mm
Band speed: 15 - 115 m/min
Total connected load: 4.0 kW
Machine weight: approx. 2.8 t
Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m
Shark 350 NC HS 5.0, fully automatic hydraulic bandsaw machine in dual-column construction for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes:
+ Powered chip conveyor, installable on the right or left side of the machine.
Bcjdpfefg E Hzjx Abfsu
+ Adjustable clamping pressure of the vices.
+ Feed conveyor with vertical rollers for lateral material support.
+ Numerically controlled bandsaw machine which can also be operated in semi-automatic mode, equipped with the new MEP 50 control system, specifically developed by MEP for automatic machines, based on Windows CE.
+ "Clean Cut" cycle: the feeder retracts the workpiece to prevent scoring on the cut surface when the band returns to the top at the end of the cut.
+ Fieldbus communication system with dual microprocessor and serial connection.
+ User interface with 7" touch screen display and mechanical buttons for machine operations, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Vokietija
999 km
Geležies lenkimo staklės
MEP Macchine Elettroniche PiegatriciSystem N
Skambinti
Gamybos metai: 1997, Sąlyga: paruoštas naudoti (naudotas), Single wire diameter: 6mm-14mm, double wire diameter: 6mm-10mm, max. bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank capacity: 300l. Machine dimensions (L/W/H): approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection possible.
Bcsdpfx Abouwrv Dofju
Mažas skelbimas
Wiesbaden
1 198 km
Konvejeris
MEPK 250
Skambinti
Sąlyga: beveik kaip naujas (naudotas), Overall length: 1500 mm
Width: 500 mm
Bcedefn Thhjpfx Abfju
Height adjustable with leveling feet: +/- 900 mm
6 rollers, diameter: 60 mm
Roller width: 430 mm
Atraskite daugiau naudotų mašinų
Mažas skelbimas
Wiesbaden
1 198 km
Ritininis konvejeris
MEPShark 40
Skambinti
Sąlyga: naujas, Length: 1500 mm
6 rollers made of steel tube, width: 185 mm
Diameter: 20 mm
Height adjustable continuously: 650 - 1030 mm
Bsdefxu Tkjpfx Abfjcu
Required space: 1500 x 250 x 650/1030 mm
Mažas skelbimas
Lemmer
1 215 km
Juostinis pjūklas
MepShark 330HH
Skambinti
Sąlyga: geras (naudotas), Apvalaus plieno pjovimo diapazonas ties 45°: 250 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 280 mm, pjovimo aukštis (maks.): 330 mm, Saw capacity:
280 mm round
330 mm square
Saw capacity at 45º:
250 mm round
250 mm square
Saw speed: 40/80 m/min
Saw blade: 3,320 x 27 x 0.9 mm
Mitre angle: 0 - 60º
Equipped with:
- Cooling system
Country of origin: Italy
Motor power: 1.8 kW
Bcsdpfx Abjtt Nd Rsfsu
Machine weight: 700 kg
Machine dimensions (LxWxH): 190 x 120 x 135 cm
Mažas skelbimas
Rednitzhembach
1 088 km
Mašinos bazė
MEPSägemaschinen - Untergestell
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 750 mm, bendras ilgis: 450 mm, bendras plotis: 450 mm, Band saw machines - base frame
with front flap
the colour RAL 6011 reseda green
Bodpfxevzak Ho Abfjcu
Mažas skelbimas
Böblingen
1 247 km
Juostinis pjūklas
MEPSHARK 230-1 NC HS 5.0
Skambinti
Sąlyga: naujas, MEP SHARK 230-1 NC HS 5.0 Double-Column Metal Band Saw
Article Number: SH230-1NCHS
Motor Power: 2.2 kW
Vice Opening: 235 mm
Bcsdpfx Abechhfuefsu
Blade Dimensions: 2950x27x0.9 mm
Weight: 1,000 kg
Cutting Speed: 15 - 100 m/min (stepless)
Cutting Capacity 0°: 230 / 230x230 mm
Cutting Capacity 45° right:
Cutting Capacity 45° left:
Cutting Capacity 60° right:
Cutting Capacity 60° left:
Description:
SHARK 230-1 NC 5.0, electro-hydraulic double-column fully automatic band saw with both semi-automatic and fully automatic operating modes.
Max. remnant length: 70 mm.
Bundle cutting: 230 x 230 mm.
Numerically controlled band saw with the new MEP 50 – Windows-based control system.
Material feed via stepper motor and ball screw, mounted on opposing ball bearings.
Single stroke: 500 mm, repeatable to saw any length.
Simple programming – enter cutting length and quantity, then press "START".
Electronic blade tension control.
Automatic cutting load monitoring through a servo valve mounted directly on the cylinder.
Rotation control of the blade with instant stop in the event of a jammed saw blade.
Mažas skelbimas
Böblingen
1 247 km
MEP COBRA 352 SX EVO Aliuminio skersinio pjovimo pjūklas
MEPCOBRA 352 SX EVO Aluminiumkreissäge
Skambinti
Sąlyga: naujas, MEP COBRA 352 SX evo [Semi-automatic]
Article number: CB352SX
Motor power: 1.5/2.2 kW
Bcodpfx Ajchkv Iobfeu
Vice opening: 180 mm
Blade dimensions: 350x32x3.4
Weight: 285 kg
Speed: 1700/3400 rpm
Cutting capacity 0°: 120 / 105 / 180x70
Cutting capacity 45° right: 120 / 100 / 135x60
Cutting capacity 45° left:
Cutting capacity 60° right:
Cutting capacity 60° left:
Description:
Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide tipped blade.
Standard configuration:
- Machine suitable for mitre cuts from 45° right to 45° left.
- The vertical alignment allows for saw operations with a head inclined from 0° to 45° left.
- * MEP features the latest generation of microprocessor controllers developed for semi-automatic machines, with single-axis control.
- FEATURES: At the beginning of the cycle: - Vice closes and motor starts – saw head descends for cutting – motor switches off – saw head lifts – vice opens.
- New – 16-character x 2 line display to show the following technical parameters: + Number of cuts performed + Cutting time + Ammeter + Displays over 100 diagnostic messages and warnings
- New – Display and log of alarm and error messages with the ability to view the incidents occurred.
Electrical equipment:
- New – Low-voltage control panel: Membrane keypad made of polyester with thermoformed, raised pushbuttons and actuation control signal.
- Saw bow stroke can be programmed directly from the control panel, adjustable according to the material to be cut.
- Ball-bearing mounted rotary table for easy and precise rotation.
- Clamping system consisting of two front-mounted vices, freely positionable along the longitudinal axis of the workpiece.
- Adjustable mechanical stops for quick positioning of the head at 0° and 45° right/left.
- Chip conveyor prepared for OPTIONAL exhaust system.
- Automatic blade lubrication system, only activated at the start of cutting.
- Machine supplied without saw blade.
- Prepared for installation of the optional minimal blade lubrication kit, in addition to the standard coolant-based lubrication with emulsion oil.
- Tool kit and operating manual with spare parts list included.
For further technical details, please refer to the attached PDF document (catalogue, page 2).
Mažas skelbimas
Böblingen
1 247 km
Juostinis pjūklas
MEPSHARK 332-1 CCS
Skambinti
Sąlyga: naujas, MEP SHARK 332-1 CCS Metal Band Saw with Semi-Automatic Descent.
Authorized MEP Dealer – Please send us your inquiry!
Motor power: 1.5/1.8 kW
Vice opening: 335 mm
Blade dimensions: 3650x27x0.9 mm
Weight: 640 kg
Cutting speed: 40/80 m/min
Cutting capacity at 0°: 300 mm / 260x260 mm / 330x260 mm
Cutting capacity at 45° right: 260 mm / 250x250 mm / 270x200 mm
Cutting capacity at 45° left: 200 mm / 180x180 mm / 200x160 mm
Cutting capacity at 60° right: 180 mm / 170x170 mm / 170x170 mm
Cutting capacity at 60° left: --
Description – MEP Metal Cutting Saw:
CCS version operating principle: Once the material is positioned and the vices are closed, the cutting process is initiated. The arm lowers by gravity, counterbalanced by a spring and regulated by a hydraulic brake cylinder. After the cut is completed, the saw arm is manually returned to the loading position for material feed.
Electrical control panel (labeled wiring, operating status indicator, safety main switch lockable via padlock, selector or speed switch, emergency stop, thermal-magnetic protection, 24V low voltage system)
Electronic bandsaw blade tension converter with on-screen display.
Manual vice with rapid clamping.
Base frame with integrated coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional).
Electric coolant pump for band cooling and lubrication.
Chip removal brush.
Adjustable precision stops for consistent cut lengths.
Machine designed for pallet truck handling.
Bimetal saw blade for solid and structural steel.
Toolkit and operating instructions included.
Motor: 1.5/1.8 kW
2 speeds: 40/80 m/min
Vice opening: 335 mm
Bandsaw blade: 3650 x 27 x 0.9 mm
Bcsdpfx Abocgbt Rsfsu
Weight: 640 kg
Refer to image for cutting data.
Further technical details can be found in the attached PDF document.
Mažas skelbimas
Böblingen
1 247 km
Juostinis pjūklas
MEPSHARK 281 CCS
Skambinti
Sąlyga: naujas, MEP SHARK 281 CCS Metal Band Saw with Semi-Automatic Descent. Item number: SH281CCS
Motor Power: 1.5/1.8 kW
Vice Opening: 285 mm
Blade Dimensions: 2950x27x0.9 mm
Weight: 375 kg
Cutting Speed: 36/72 m/min
Cutting Capacity at 0°: 250 / 230x230 / 280x200 mm
Cutting Capacity at 45° right: 190 / 180x180 / 180x180 mm
Cutting Capacity at 45° left: —
Cutting Capacity at 60° right: —
Cutting Capacity at 60° left: —
Description:
- Saw bow, vice assembly, and base made of high-strength cast iron
- Precision angle marking on the cast iron frame
- Electrical system (with fully identifiable wiring and 24 V low voltage system)
- IP 55 switch lever for manual cycles (if equipped)
- Rotating chip brush for the saw blade
- Rapid-approach closing device with quick-action vice
- Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left
- Bi-metal saw band 2950 x 27 x 0.9 mm
- Includes service tools, operating manuals, and spare parts ordering instructions in the user’s language
- SHARK 281 available with manual function; SHARK 281 CCS with manual mode and automatic descent by gravity
- CCS (Cut Control System) with: (A) Selector switch for manual and automatic cutting, (B) Adjustable cutting speed, (C) Hydraulic brake with reservoir, (D) End stop for blade stopping; also retrofittable to existing machines
- Quick-release vice adjustment
- Hydraulic sensor for blade tension display
- Electric coolant pump for blade cooling and lubrication, with accessible coolant tray above the base
- Pneumatic vice versions (MA): vice opens and closes via manual valve (optional pedal control available)
MEP SHARK 281 SXI evo [Semi-Automatic]
Item number: SH281SXI
Motor Power: 1.5/1.8 kW
Bjdpfx Aocgbp Iobfecu
Vice Opening: 285 mm
Blade Dimensions: 2950x27x0.9 mm
Weight: 435 kg
Cutting Speed: 36/72 m/min
Cutting Capacity at 0°: 250 / 230x230 / 280x200 mm
Cutting Capacity at 45° right: 190 / 180x180 / 180x180 mm
Cutting Capacity at 45° left: —
Cutting Capacity at 60° right: —
Cutting Capacity at 60° left: —
Description
Semi-automatic operation:
The vice closes and the motor starts, the saw head lowers for the cut, the motor stops, the saw head rises, and the vice opens.
Key Features:
- New centralized control console on an articulated arm
- Latest-generation hydraulic control unit: highly efficient and energy-saving
- Base with extendable coolant tray
The machine is fully compliant with all CE standards!
For additional technical details, please refer to the attached PDF document.
Mažas skelbimas
Böblingen
1 247 km
Šaltas diskinis pjūklas
MEPFALCON 352 Kreissäge
Skambinti
Sąlyga: naujas, Motor power: 1.1/2.2 kW
Vise opening: 130 mm
Blade dimensions: 350x32x2.5 mm
Weight: 220 kg
Speed: 30/60 rpm
Cutting capacity at 0°: 115 / 100 / 130x80 mm
Cutting capacity at 45° right: 100 / 85 / 90x80 mm
Cutting capacity at 45° left: 75 / 75 / 90x65 mm
Cutting capacity at 60° right:
Cutting capacity at 60° left:
Description:
Manual crosscut saw for mitre cuts from 45° right to 45° left, featuring high cutting performance.
Robust cast iron construction, practical and safe for every cut. The FALCON 352 is available as a workbench version or on a stand (accessory). The machine is equipped with a two-speed three-phase motor. Upon request, the machine is supplied with a pneumatic vice (FALCON 352 MA; when the head is lowered, the vice closes automatically). This version is always delivered with a stand.
Standard features:
- Externally adjustable clutch
- Locking mechanism with vice
- Slidable on prismatic guide with adjustable strip
- Fixed vice jaws with axial adjustment for clamping the workpiece close to the cutting line
- Adjustable steel swarf remover
- 48 V electric coolant pump for blade cooling and lubrication
- Double return spring for securing the loading table
- Machine can be lifted
- Worm shaft mounted on bearing pair
- Saw blade shaft mounted on offset stamp
- 2 speeds: 30 and 60 rpm
- Vice opening: 130 mm
- Machine supplied without saw blade
Electrical equipment:
- Electrical control panel
- Marked cable connections
- Main safety switch lockable with padlock
- Emergency stop device
- Phase failure protection
Bodpfxscgrkye Abfscu
- Speed selector switch
- Thermal magnetic protection
- Undervoltage release
- Motor with protection class IP 54
- Low-voltage control unit 24 V
- Electric coolant pump 48 V
- Motor 1.1/2.2 kW – 400 Volt
For further technical data, please refer to the attached PDF document.
Mažas skelbimas
Böblingen
1 247 km
Juostinis pjūklas
MEPSHARK 350 NC HS 5.0
Skambinti
Sąlyga: naujas, MEP SHARK 350 NC HS 5.0 Fully Automatic Twin-Column Metal Band Saw
Article Number: MEP SHARK 350 NC HS 5.0
Motor Power: 4.0 kW
Vise Opening: 355 mm
Blade Dimensions: 4640x34x1.1 mm
Weight: 2,800 kg
Cutting Speed: 15 - 115 m/min, infinitely variable
Cutting Capacity 0°: 350 / 350x350 mm
Cutting Capacity 45° right:
Cutting Capacity 45° left:
Cutting Capacity 60° right:
Cutting Capacity 60° left:
Description:
Automatic hydraulic band saw featuring a twin-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm.
Numerically controlled bandsaw, also capable of semi-automatic operation, equipped with the new MEP 50 control system, specifically developed by MEP for automatic machines, based on Windows-2 "CE".
Standard features include:
Powered swarf conveyor, can be installed on either the right or left side of the machine.
Vise pressure regulation for the clamping jaws.
Material feeder with vertical rollers for side support.
Clamping pressure regulation.
Storage capacity for 100 programs.
Bedpfxei Hmcdj Abfscu
The machine can be supplied with either a 34 mm or 41 mm band at no additional cost.
Mažas skelbimas
Böblingen
1 247 km
Juostinis pjūklas
MEPSHARK 282 SXI EVO Metallbandsäge
Skambinti
Sąlyga: naujas, MEP SHARK 282 SXI evo [Semi-Automatic]
All MEP models available on request!
Motor power: 1.5 / 1.8 kW
Jaw opening: 285 mm
Blade dimensions: 2950x27x0.9 mm
Weight: 485 kg
Blade speed: 36 / 72 m/min
Cutting capacity at 0°: 250 / 220x220 / 280x220 mm
Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm
Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm
Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm
Cutting capacity at 60° left:
Description
The SHARK 282 SXI EVO is an electro-hydraulic, semi-automatic bandsaw with both semi-automatic dynamic and manual modes, equipped with MEP-28 control for mitre cuts from 45° right to 60° left.
Semi-automatic function:
At the start of the cycle: - The vice closes and the motor starts – Saw head descends for cutting – Motor switches off – Saw head returns – Vice opens.
Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button).
Key features:
• New centralized control console on a pivoting arm, allowing operator access from any working position
• Low-voltage control panel:
– Polyester membrane keypad with thermoformed raised buttons and actuation control signal
– Display shows:
* Diagnostics (messages in user’s language)
* Alarms (causes description)
* Status of inputs and outputs
* Cut counter
* Time used for each cut
* Saw blade motor current draw
* Saw blade tension
* Saw blade speed
* Numeric display of saw head position
– Manual 24V operation switch, IP55-rated
• Complete program for all special cutting cycles
Bcsdpocgbq Iefx Abfju
• Identification of additional special cutting cycles for unique applications
• New generation hydraulic control system: powerful and energy-efficient
• Large working surface with turntable on roller bearings, 265 mm diameter with preloaded thrust bearings
• Dual blade speeds (36/72 m/min) with control
• Prepared for optional electronic inverter for stepless blade speed regulation from 20 to 90 m/min
• Saw bow stroke programmable directly from the control panel, allowing adaptation to the workpiece height
• Movable clamping device to the left and right, with quick-release vice
• Manual blade tensioning control with electronic readout on display
• Base frame with pull-out coolant tray
• Electric coolant pump for blade cooling and lubrication
• Prepared for installation of minimum quantity lubrication system for the saw blade (optional), as well as standard emulsion oil lubricating system
• Chip removal brush
• Designed for forklift transport
• Length stop for repeat cuts
• Material support arm with roller for mounting a loading table
• Bi-metal saw blade for solid and profile materials
• Tool kit and operating instructions in the user’s language
For further technical data, please refer to the attached PDF document.
Mažas skelbimas
Böblingen
1 247 km
Juostinis pjūklas
MEPSHARK 331-1 NC 5.0 Spider
Skambinti
Sąlyga: naujas, MEP Bandsaw SHARK 331-1 NC 5.0 Spider
All MEP models available on request!
Bcedjchhdispfx Abfsu
Motor power: 2.2 kW
Vice opening: 340 mm
Blade dimensions: 3650x27x0.9 mm
Weight: 1,240 kg
Cutting speed: 15 – 100 m/min, stepless
Cutting capacity at 0°: 280 / 260x260 / 330x260 mm
Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm
Cutting capacity at 45° left: —
Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm
Cutting capacity at 60° left: —
Description
- Fully automatic hydraulic bandsaw
- Mitre cuts up to 60° to the left possible
- Blade length: 3650x27x0.9 mm
- Single stroke: 600 mm (programmable up to 10 m)
- Intuitive touchscreen control
- Saw arm made of spheroidal cast iron – robust and stable
- Required floor space: 3.4 m²
- Dimensions: 1,900 mm width x 1,800 mm depth
For further technical data, please refer to the attached PDF document.
Mažas skelbimas
Böblingen
1 247 km
EP narys COBRA 352 MA aliuminio diskinis pjūklas
MEPCOBRA 352 MA Aluminiumkreissaege
Skambinti
Sąlyga: naujas, MEP COBRA 352 MA
Article Number: CB352MA
Motor Power: 2.2 kW
Table Opening: 180 mm
Blade Dimensions: 350x32x3.4
Weight: 210 kg
Speed: 1700/3400 rpm
Cutting Capacity at 0°: 120 / 105 / 180x70 mm
Cutting Capacity at 45° right: 120 / 100 / 135x60 mm
Cutting Capacity at 45° left:
Cutting Capacity at 60° right:
Cutting Capacity at 60° left:
Description
Manual circular saw for cutting aluminum, with miter cuts from 45° right to 45° left and the saw head tilting from 0° to 45° to the left. On the Cobra 352 MA (automatic vice), the vices close automatically when the saw head is lowered.
Standard Equipment:
- Roller-bearing mounted turntable for quick and precise miter adjustment
- Clamping system for locking the saw head in any position
- Automatic blade lubrication
- Clamping system consisting of two vices
- Saw head lock in the upper position
- Adjustable length stop for repeat cuts of the same length
- Vice opening 180 mm
- Includes tools and user manual
Electrical Equipment:
- Control panel
- Labeled cable connections
- Operation-ready indicator light
Bodpfxschku So Abfocu
- Main safety switch
- Emergency stop button
- Speed selector switch
- Thermal-magnetic protection
- Undervoltage release
- Trigger handle protection type IP 55
- Low voltage circuit 24 Volt
- Motor 1.5/2.2 kW – 400 Volt
For further technical details, please refer to the attached PDF document.
Mažas skelbimas
Böblingen
1 247 km
EP narys COBRA 352 NC 5.0 pjūklas
MEPCOBRA 352 NC 5.0
Skambinti
Sąlyga: naujas, MEP COBRA 352 NC 5.0 [Fully Automatic]
Article number: CB352NC 5.0
Bcjdpfochkwhjx Abfju
Motor power: 2.6/3.5 kW
Vice opening: 180 mm
Blade dimensions: 350x32x3.4
Weight: 600 kg
Speed: 1700/3400 rpm
Cutting area 0°: 120 / 105 / 180x70
Cutting area 45° right: 120 / 100 / 135x60
Cutting area 45° left:
Cutting area 60° right:
Cutting area 60° left:
Description
Automatic mitre saw with semi-automatic function for the cutting of aluminum and light metal alloys. Mitre cuts from 45° right to 45° left, with the saw head swiveling 0°-45° to the left.
Control is managed via multi-microprocessors, with two NC-controlled axes enabling programming of up to 1,000 different cutting programs per material, each with different quantities and lengths.
-New centralized control console on an articulated arm, allowing easy operation from any working position with immediate access to the emergency-stop switch.
-Fieldbus communication system with dual microprocessor and serial interface.
-Display with 20 characters x 4 lines, showing technical parameters such as: number of programmed and completed cuts, saw blade thickness, feed length, cutting time, ammeter, and indications for over 100 diagnostic messages and warnings.
-New – Display and recording of alarm and error messages, with the option to view incidents that have occurred. New – Material feed of 600 mm with cutting motor and ball screw mounted on opposed bearings.
-New – Low-voltage control panel: Polyester membrane keypad with thermoformed and raised keys and actuation signal.
-Lifting stroke of the saw bow programmable directly from the control panel, allowing adaptation to the cutting material.
-Ball-bearing rotary table for smooth and precise rotation.
-Clamping system using two front-positioned vices, which can be freely positioned along the longitudinal axis of the workpiece.
-Adjustable mechanical stops for quick positioning of the saw head at angles of 0 and 45 degrees left and right.
For further technical data, please refer to the attached PDF document (page 3 of catalog excerpt).
Mažas skelbimas
Misterton
1 608 km
Uždengimo mašina
MEPAVT400
Skambinti
Sąlyga: geras (naudotas), Gamybos metai: 2021, MEP AVT400 Fassverschließmaschine
Seriennummer: 271221
Bcjdpfx Asu S Rk Hobfsu
Baujahr 2021, Edelstahl-Verschließer, robuste und benutzerfreundliche Verschließmaschine, geeignet zum Aufbringen von ROPP- und Schraubverschlüssen auf Flaschen mit Schraubgewinde. Max. Flaschendurchmesser: 195 mm, max. Flaschenhöhe: 355 mm, Leistung: bis zu 400–600 Flaschen/Stunde, mobil, 1-phasig.
Mažas skelbimas
Velen
1 176 km
Juostinis pjūklas - horizontalus
MEPSHARK 382-1 SXI EVO
Skambinti
Sąlyga: naujas, Cutting diameter: 280 mm
Cutting capacity at 90 degrees, flat: 380 x 260 mm
Cutting capacity at 90 degrees, square: 260 x 260 mm
Speed range: 40 / 80 m/min
Saw blade dimensions: 3440 x 27 x 0.9 mm
Motor power: 1.5 / 1.8 kW
Weight: 670 kg
Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic modes, suitable for cuts from 45° right to 60° left.
Key features:
- Swivelling control panel mounted on a vertical post.
- 420 mm large rotary table on roller bearings with preloaded thrust bearing and interchangeable steel inserts.
- Dual blade speed (40/80 m/min.).
Bcedpfx Aefg E Iajbfou
Mažas skelbimas
Velen
1 176 km
Juostiniai pjūklai - horizontali
MEPSHARK 512 SXI EVO
Skambinti
Sąlyga: naujas, Cutting diameter: 330 mm
Cutting range at 90° (flat): 510 x 320 mm
Cutting range at 90° (square): 320 x 320 mm
Speed range: 40 / 80 m/min
Saw blade dimensions: 3440 x 27 x 0.9 mm
Motor power: 1.5 / 1.8 kW
Weight: 670 kg
Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right.
Versatile machine with a 4640 x 34 x 1.1 mm blade for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°.
The operator console on a swivel arm allows comfortable and safe operation from any position.
Bcsdpsfg E Ibsfx Abfsu
Electronic inverter for stepless adjustment of the blade speed from 15 to 100 m/min.
Large rotary table with a diameter of 280 mm, featuring an engraved, precise fine scale, easily adjustable and mounted.
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Velen
1 176 km
Juostiniai pjūklai - horizontali
MEPSHARK 281 SXI EVO
Skambinti
Sąlyga: naujas, Cutting diameter: 250 mm
Cutting capacity at 90 degrees, flat: 280 x 220 mm
Cutting capacity at 90 degrees, square: 220 x 220 mm
Speed range: 36 / 72 m/min
Saw blade dimensions: 2950 x 25.4 x 0.9 mm
Bsdefg E H Rspfx Abfocu
Machine weight: approx. 0.4 t
Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m
Semi-automatic function:
The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off after the cut, the saw head lifts, and the vice opens.
Some features:
- New centralized control console mounted on a pivoting arm
- Next-generation hydraulic control system, highly efficient and low energy consumption
- Base frame with extendable coolant tank
The machine fully complies with all CE regulations!
Mažas skelbimas
Velen
1 176 km
Šaltas diskinis pjūklas
MEPFALCON 352
Skambinti
Sąlyga: naujas, Saw blade diameter: 350 mm
Cutting capacity at 90 degrees: round 115 mm
Cutting capacity at 90 degrees: square 100 mm
Cutting capacity at 90 degrees: flat 130 x 80 mm
Cutting capacity at 45 degrees: round 100 mm
Cutting capacity at 45 degrees: square 85 mm
Cutting capacity at 60 degrees: flat 90 x 80 mm
Clamping range: 130 mm
Speed: 30 / 60 rpm
Saw blade dimensions: 350 x 32 x 2.5 mm
Total power requirement: 1.1 / 2.2 kW
Machine weight: approx. 0.22 t
Space requirement: approx. 1200 x 860 x 900 mm
Manual mitre saw for miter cuts from 45° left to 45° right.
Steel worm wheel with double ball bearings
Saw blade shaft mounted on an eccentric made of spheroidal cast iron
Bronze gear with key and conical coupling for maximum power transmission
to the steel worm wheel
Vice with adjustable guide strips
Adjustable burr-free cutting device (enables burr-free cuts)
Length stop
Double return springs
Main safety switch
Emergency stop button
Speed selector switch
Bedpfx Abofmck Hsfecu
Electric coolant pump for lubrication and cooling of the saw blade (micro-spray unit can be installed as an option)
Motor: 1.5/1.8 kW - 400 Volt
Optional base frame: 361 Euros
Mažas skelbimas
Velen
1 176 km
Aliuminio diskinis pjūklas
MEPCOBRA 352 SX EVO
Skambinti
Sąlyga: naudotas, Saw blade diameter: 350 mm
Cutting range at 90° (round): 120 mm
Cutting range at 90° (square): 105 mm
Cutting range at 90° (flat): 180 x 70 mm
Cutting range at 45° (round): 120 mm
Cutting range at 45° (square): 100 mm
Cutting range at 45° (rectangular): 135 x 60 mm
Saw blade speeds: 1700 / 3400 rpm
Total power requirement: 1.5/2.2 kW
Machine weight approx. 0.285 t
Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m
Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide-tipped blade.
Bedpfefc T Ugox Abfscu
The machine enables mitre cuts from 45° right to 45° left. The vertical alignment allows sawing operations with the head tilted from 0° up to 45° to the left.
Mažas skelbimas
Velen
1 176 km
Šaltas diskinis pjūklas
MEPFALCON 275
Skambinti
Sąlyga: naudotas, Gamybos metai: 1999, Diskinio pjūklo skersmuo: 275 mm
Pjovimo sritis prie 90°: apvalus 80 mm
Bedpol R Nnnefx Abfscu
Pjovimo sritis prie 90°: kvadratas 70 mm
Pjovimo sritis prie 90°: plokščias 100 x 60 mm
Pjovimo sritis prie 45°: apvalus 70 mm
Pjovimo sritis prie 45°: kvadratas 60 mm
Pjovimo sritis prie 60°: plokščias 80 x 50 mm
Spaudimo sritis: 110 mm
Sūkių dažnis: 45 / 90 aps./min
Bendras galios poreikis: 0,5 kW
Staklių svoris: apie 0,07 t
Užimama vieta: apie 900 x 700 x 1600 mm
Rankinis šalto diskinis pjūklas su:
- Staklių pagrindas
- Atraminė liniuotė 1500 mm
Palengviname jums paiešką: "mep tiger 300"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Mep Tiger 300 (113)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo




















































