Medienos Tekinimo Staklės pirkti naudotą (48 120)

Būklė: naudotas, Gamybos metai: 1987, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 280 mm Turning length: 1,500 mm Distance between centers: 1,500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Speed range: 25-1,250 / 32-1,600 / 36-1,800 - 18 steps rpm Feed range: 0.05 - 8.5 mm Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 200 mm Dsdpfx Asu Ixznjc Iouu Total power requirement: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions approx. LxWxH: 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (end position switch clutch not functional, manual shut-off required) Top slide with 4-position tool post Steel plate Ø 705 mm with offset threaded holes

Būklė: naudotas, Technical Details: Table diameter: 4500 mm Faceplate diameter: 4500 mm Operating hours: 0 h Swing diameter: 5000 mm Turning diameter: 5000 mm Maximum workpiece height: 2500 mm Control system: Sinumerik 840D SL X-axis: 300 mm ram stroke X-axis: 2850 mm ram travel X-axis: 2850 mm working travel without tool X-axis: 5000 mm travel with tool changer W-axis: 1800 mm cross rail elevation Tool stations/positions: 12 Tool holder: HSK 100 (spindle) Maximum workpiece weight: 100 t Table speed: 1 - 50 rpm T-slots: 8 units (36 H12) Ram milling speed: 4000 rpm Rapid traverse in X and Z axis: 8000 mm/min Torque (milling): 100,000 Nm Torque (turning): 200,000 Nm Total power requirement: 80 (2x40) kW Approximate machine weight: 140 t Machine dimensions approx. (LxWxH): 11.5 x 6.6 x 8.4 m NEW CNC Vertical Carousel Lathe – Produced to official order and down payment. The displayed photos are from a newly built machine delivered to a customer. (Images are for better illustration) Range of machining operations: - Turning, e.g. external longitudinal turning, internal and external facing, profiling operations, internal and external grooving - Drilling, such as short and deep hole drilling - Milling, including facing, corner, profile and T-slot milling - Thread cutting - Also suitable for roughing and end machining. The machine bed, designed as a welded construction, absorbs extreme cutting forces. The table is made from high-strength Meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with a hydrodynamic support system for the workpiece. Additional features: - Automatic tool changer - 8-jaw power chuck with hardened jaws and clamping spindle - Includes 40 bar coolant system with filtration unit - Hydraulics and lubrication equipment by ATOS and Dropsa - Linear measurement system for axes by Heidenhain - Includes Renishaw probing system Dodsu Ix H Djpfx Ac Ieuu - NEW – With warranty & service by WMW AG *

Būklė: naudotas, Gamybos metai: 1988, Technical details: Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm Control: TX-8 Spindle bore: 60 mm Dedpfsu Rqabex Ac Ijuu Spindle speed: 63 - 3150 rpm (2-step) Feed rate: 10,000 mm/min Tool turret - number of stations: 8 Operating hours (power-on hours): 8,834 h Tailstock quill taper: SK30 DIN 2080 Tailstock quill stroke: 105 mm Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 t Machine dimensions (LxWxH) approx.: 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Equipment: 200 mm hydraulic chuck (without jaws) Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system Control panel Accessories: Fine adjustment device for tool setting

Būklė: naudotas, Gamybos metai: 1976, Technical Details: Swing diameter over bed: 340 mm Swing diameter over slide: 190 mm Turning length: 800 mm Turning length: facing = 140 mm / cross = 120 mm Centre height over bed: 170 mm Spindle bore: Ø 40 mm Speed range: 25 - 2000 rpm / 20 steps Feeds: longitudinal: 0.028 - 1.0 mm / cross: 0.012 - 0.44 mm Tailstock quill taper: MT3 Tailstock quill travel: 120 mm Total power requirement: 3.0 kW Machine weight approx.: 1.1 t Machine dimensions approx. LxWxH: 2.0 x 0.8 x 1.4 m Thread cutting capability: Metric, Whitworth, and module threads Equipment: - 2-way measuring system VISUCONT Duodpfx Acsva Erte Iju - 3-jaw chuck Ø 205 mm with internal clamping jaws - Multifix quick-change toolpost - Foot brake - Coolant pump (supply line not included)

Būklė: naudotas, Gamybos metai: 1952, Technical details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 520 mm Djdpju Tq U Iofx Ac Ieuu Turning length: 2500 mm Cross slide travel in z-axis (plan): approx. 500 mm Top slide travel in z-axis: approx. 300 mm Centre height: 300 mm Spindle bore: 90 mm Speed range: 3.2 – 382 / 22 steps rpm Feed range x-direction (longitudinal): 0.213 – 2.67 / 36 steps m/min Feed range y-direction (transverse): 0.070 – 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Approx. machine weight: 8.2 t Approx. machine dimensions (LxWxH): 5.3 x 1.6 x 1.6 m Transport dimensions: approx. 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-way tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Būklė: naudotas, Gamybos metai: 2008, Technical details: Swing diameter over bed: 400 mm Swing diameter over cross slide: 400 mm Turning length: 1155 mm Max. turning diameter: Ø 350 mm Travel path - X: 205 mm Travel path - Z: 620 mm Control: Fanuc OI-TC Max. tool weight: 235 kg (with tailstock) Spindle bore: Ø 80 mm Spindle speed: stepless rpm Rapid traverse X-axis: 20 m/min Rapid traverse Z-axis: 24 m/min Tool turret - Number of stations: 12 Tailstock taper: ISO MK 4 mm Tailstock quill stroke: 150 mm Total power requirement: 45 kVA Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 2.6 x 1.8 x 2.2 + transformer m Equipment: - 3-jaw chuck Ø 260 mm with reversible jaws (internal/external) - Live center in tailstock - Disc turret Ø 480 mm - Hydraulic unit (40-litre capacity) - Coolant tray (80 kg) - LOSMA extraction filter - Chip tray (30 kg) - Chip conveyor (180 kg) Operation via control panel and foot switch Accessories: Various bar sleeves Ø 78 mm (external) Duedpfx Acev Iplao Iju Various draw bars 1x 4-jaw chuck Ø 200 mm TOS Various clamping jaws Various clamping fixtures

Būklė: naudotas, Gamybos metai: 2007, Techninės detalės: Sukimosi skersmuo virš lovos: 762 mm Sukimosi ilgis: 850 mm Plokštuminis poslinkis (x ašis): 287 mm Išilginis poslinkis (z ašis): 864 mm Valdymas: CNC Haas Veleno pratekėjimas: 76 mm Sukimosi greitis: maks. 3400 beslenkstenis aps./min Dodpfsvvt Emox Ac Ieuu Grąžto atramos priėmimas ISO: Ø 290 Grąžto atramos smūgis: taip mm Įrankių revolveris – stočių skaičius: 12 Elektrinė įranga – įtampa/dažnis: 360/400 V – 50-60 Hz Apytikslis staklių svoris: 6,3 t Transportavimo išmatavimai: apie 3,4 x 2,1 x 2,4 m Įranga: 3-žandų galingas griebtuvas KITAKAWA Ø 250 mm (be žandų), 4200 aps./min, valdomas dviejų padėčių kojiniu jungikliu Revolveris su varomais įrankiais Aušinimo skysčio sistema su elektros paruošimu Įrankių matavimo sistema yra I.D.

Būklė: naudotas, Gamybos metai: 1982, Techninė informacija: Plyšinės plokštės skersmuo: 2600 mm Sukimosi skersmuo virš atramos: 2500 mm Tekinimo ilgis: 450 mm Atstumas tarp centrų: 1600 mm Sukimosi skersmuo virš lovos: 2900 mm Verpstės anga: 100 mm Sukimosi greitis: pavarų pakopos aps./min Prapjovimo diapazonas: išilginis tekinimas 0,12-31,5, plokščių tekinimas 0,12-45 mm/min Staklių lovos kreipiamųjų ilgis: 2900 mm Didžiausias ruošinio svoris tarp centrų: 400 000 kg Bendras energijos poreikis: 45 kW Apytikslis staklių svoris (visi komponentai kartu): apie 29,0 t Staklių matmenys IxPxA: 5,2 x 5,0 x 3,1 m 3 krypčių matavimo sistema su RSF-Elektronik skaitmeniniu ekranu Valdymo pultas Dusdpfx Acswtctys Iou Rittal valdymo spintos aušinimo agregatas

Būklė: naudotas, Techniniai duomenys: Dedjwa I Shspfx Ac Ieuu Sukimosi skersmuo virš lovos: 560 mm Sukimosi skersmuo virš stumdomos dalies: 280 mm Sukimo ilgis: 2000 mm Centru aukštis: 280 mm Centru atstumas: 1600 mm Darbinio veleno skylė: 65 mm Sūkių diapazonas: 9...1800 / 24 žingsniai aps./min Išilginiai padavimai: 0,025-0,09 mm/apl Skersinis padavimas: 0,012-0,045 mm/apl Grąžto movos eiga: 225 mm Grąžto movos kūgis: MK5 Bendras energijos poreikis: 18 kW Apytikslis įrenginio svoris: 3,8 t Apytiksliai matmenys (IxPxA): 3,7 x 1,6 x 2,05 m Trijų žandikaulių griebtuvas D=320mm Viršutinė slankiojanti dalis pasukama 45° į dešinę ir į kairę

Būklė: naudotas, Gamybos metai: 2000, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm CNC control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter at front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill taper: MK4 Tailstock stroke: 500 mm (travel) Main spindle power: 7.5 kW (100% duty cycle = 11 kW) Electrical configuration – voltage/frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe is equipped with a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders are installed in the magazine, 4 of which are collet holders Coolant system, coolant supply through turret Control cabinet with cooling, Rittal Type SK3393100 Workpiece collection tray Machine lighting Djdpfeu Ixwiex Ac Ijuu Accessories: 1x driven tool as per description.

Būklė: naudotas, Technical Details: Swing diameter over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Duodpfx Aju Ixy Dec Ieu Center height: 150 mm Spindle bore: 30 mm Speed range: 35 - 1500 / 16 steps rpm Feed range x-axis: 0.04 - 2.4 / 30 steps m/min Tailstock quill travel: 125 mm Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck, 160 mm - Chuck guard - Protection system WxH: 510x400 mm - Multifix tool holder (4 pieces) - Center in tailstock - Top slide pivotable +/-45°, max. travel = 100 mm - Cross slide travel = 300 mm feed - Coolant system pump (without supply piping)

Būklė: naudotas, Gamybos metai: 1960, Technical Details: Dsdpfx Acsu Ix A Ej Ieuu Swing diameter over bed: 630 mm Swing diameter over cross slide: 320 mm Turning length: 2800 mm Distance between centers: 2800 mm Swing diameter in gap: 700 mm Gap length: 450 mm Spindle bore: 70 mm Machine weight approx.: 4.4 t Machine dimensions approx. (LxWxH): 4.7 x 1.5 x 1.5 m Thread cutting capability Accessories: 4-jaw chuck different centers gears jaws and small parts steady rest

Būklė: naudotas, Gamybos metai: 2004, Technical Details: Swing diameter over bed: 850 mm Swing diameter over cross slide: 580 mm Turning length: 4000 mm Distance between centers: 4000 mm Faceplate diameter: 800 mm Control: Siemens 810D Spindle speed: 1 - 1,600 rpm / 2-step Spindle torque: 6,000 Nm Feed drive AC: X = cross + Z = longitudinal: 16,000 / 20,000 N Rapid traverse in X-direction: 4 m/min Rapid traverse in Y-direction: 7 m/min Spindle bore: 130 mm (Spindle nose DIN 55027 Size 11) Operating hours / On-hours: to be read out Tailstock quill: ISO MT 6 Tailstock quill stroke: 350 mm Max. workpiece weight between centers: 5,000 kg Max. workpiece weight – unsupported: 1,800 kg Interface: RS 232 / V24 Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Total power requirement: approx. 52 kW Machine weight approx.: 14.0 t Machine dimensions (LxWxH): approx. 2.6 x 9.1 x 2.5 m Cycle turning lathe with Siemens cycle control Dodpfx Acju Ix Ize Iouu Motor: 37 kW, rated speed 1,500 rpm; max. speed 6,500 rpm; torque 235 Nm two gearbox stages Stage II: Spindle torque 258.9 to 1,364.6 Nm Stage I: Spindle torque 1,050.4 to 5,536.1 Nm Feed drive: three-phase servo drive 2x chip conveyors Double electrical cabinet Parat quick-change tool post Coolant system Including various accessories (see photo), as well as steady rest and 3-jaw chuck Ø 500 mm Rota-S plus

Būklė: naudotas, Technical Details: Swing diameter over bed: 1,040 mm Swing diameter over carriage: 720 mm Distance between centers: 5,400 mm Center height over bed: 540 mm Control: Siemens 828D CNC with ShopTurn Swing diameter in gap: 1,300 mm Gap length: 640 mm Spindle bore: 152 mm Spindle speed: 3.5–1000 rpm / 4 speed ranges Feed rate (X-axis): 37.24 m/min Feed rate (Z-axis): 21.91 m/min Longitudinal feed force (X-axis): 6.44 kN Maximum feed force (Z-axis): 17.2 kN Tailstock taper: Morse Taper 6 Tailstock quill travel: 300 mm Total power requirement: approx. 30 kW Machine weight approx.: 14.1 t Required space approx.: L:7.7×W:1.7×H:2.0 m The lathe is being geometrically overhauled and is currently undergoing modernization. Equipment: - Tailstock Morse Taper 6; quill travel 300 mm - 360° swiveling quick-change tool post Dujdpeu Ix Rpsfx Ac Isu - 3-jaw chuck Ø=630 mm - Chuck guard - 2 steadies (1 fixed + 1 open fixed) - 4 centers for tailstock - 5 quick-change tool holders for turning tools - 1 keyless drill chuck 16 mm + 2 drills with Morse Taper 5 adapters (Ø 68.5 mm & 24.75 mm) - 1 set of custom-made clamping devices Accessories: - Faceplate Ø=800 mm (modification required) CNC Turning with ShopTurn – Your Advantages at a Glance: · Flexible programming via graphical-interactive interface (no DIN/ISO knowledge required) or textual input with contour drawing and cycle support. · User-friendly operation with practical setup and measuring functions, clear tool management, and 3D simulation · Increased productivity thanks to PC software support for offline job preparation · Thread cutting possible (metric threads, inch threads, module threads)

Būklė: naudotas, Gamybos metai: 2016, Technical Details: Duedpfsvav Sdjx Ac Iou Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore: Ø 42 mm Tailstock quill taper: ISO MK4 Tailstock quill travel: 180 mm Total power requirement: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.4 x 1.0 x 1.7 m The lathe does not have a rapid traverse. Positioning over 2 axes Readout via Pinacho Lathe Controller Multifix toolpost with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Būklė: naudotas, Gamybos metai: 2006, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 850 mm Centre distance: 850 mm Longitudinal travel (Z-axis): 900 mm Cross travel (X-axis): 260 mm Control: Manuaplus 4110 Spindle speed: 10 – 3000 / 2x seples rpm Spindle torque: 920 Nm Spindle bore: 70 mm Cross travel (X-axis): 8 m/min Longitudinal travel (Z-axis): 10 m/min Operating hours / Power-on hours: approx. 34,600 h Tailstock taper ISO: MK 5 Tailstock quill travel: 180 mm Total power requirement: 24 kVA Machine weight approx.: 5.2 t Machine dimensions approx. LxWxH: 2.2 x 3.2 x 1.9 m Multifix toolholder size C 3-jaw chuck Ø 250 mm Chip tray Manual hour counter Live centre in tailstock Operation via control panel and monitor Accessories: 4-jaw chuck Ø 250 mm with internal jaws Dusdpfswtct Hsx Ac Iou Various chuck keys Machine lighting 8x base plates 4x wedge lifters Various sets of jaws 1x steady rest Ø 100 mm closed

Būklė: naudotas, Gamybos metai: 1975, Technical Details: Swing over bed: 500 mm Swing over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 - 2240 rpm / 24 steps Dedpfov A Sqhox Ac Ijuu Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 - 1.6 mm/rev – 32 steps Cross feeds: 0.02 - 0.71 mm/rev – 32 steps Total power requirement: 11 kW Machine weight approx.: n/a t Machine dimensions approx. LxWxH: 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle run), available free in Leipzig. Top slide rotatable 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for 2000 rpm. Thread cutting: metric, module, inch threads Chip protection wall Chuck guard (mechanical) MULTIFIX toolpost with boring bar holder Ø 40 mm Chip collection tray Coolant supply with pump Lead screw protection Machine feet CE safety pre-installed

Būklė: naudotas, Gamybos metai: 1999, Techninės detalės: Sūkių diametras virš staklių lovos: 430 mm Sūkių diametras virš skersinio stalo: 210 mm Sūkių ilgis: 510 mm Skersinis eiga (X ašis): 150–160 mm Išilginė eiga (Z ašis): 300–510 mm Valdymas: Fanuc 21T Sūkių skaičius: 6300 aps./min. Sukimo momentas ant veleno: 17,5 Nm Išorinis veleno skersmuo priekinėje atramoje: 45 mm Įrankių bokštelis – stotelių skaičius: 8 Pagrindinio veleno galia: 11 kW Elektros įranga – įtampa/dažnis: 400/50 V/Hz Bendras galios poreikis: 17 KVA Staklių svoris apie: 2,4 t Staklių matmenys (ilgis x plotis x aukštis): 2,2 x 1,4 x 2,0 m Dujdpeyw Hmfjfx Ac Iju EMCO TURN 345 – kompaktiškas, galingas CNC tekinimo staklės, skirtos tiksliam pavienių detalių, taip pat mažų ir vidutinių serijų apdirbimui. Išsiskiria tvirta konstrukcija, dideliu patikimumu ir lengvu valdymu; su patikrintu Fanuc Series 21-T valdymu užtikrinamas tikslus ir stabilus apdirbimo procesas bei paprastas programavimas naudojant standartinį G kodą.

Būklė: naudotas, Gamybos metai: 1970, Technical details: Swing diameter over bed: 325 mm Swing diameter over cross slide: 150 mm Turning length: 1000 mm Turning length: facing: 165 mm / transverse: 160 mm Centre height over bed: 200 mm Gap length: no gap mm Dedpfxju Ixydj Ac Ijuu Spindle speed range: 48 - 1,500 / 10-step rpm Work spindle bore: 40 mm Feeds: longitudinal: 0.021...2.34 mm / transverse: 0.09...1.6 mm Tailstock quill taper: MK 4 Tailstock quill stroke: 125 mm Total power requirement: 2.2 kW Approx. machine weight: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Equipment: - 3-jaw chuck Ø 200mm with internal clamping jaws - Multifix quick-change toolholder - Foot brake - Coolant pump (delivery exclusive)

Būklė: naudotas, Gamybos metai: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Dedpfeu Ix D Aex Ac Ijuu Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swivels 30° right/left 2x T-slots for copying device Live center

Būklė: naudotas, Gamybos metai: 1951, Technical details: Djdpfx Aju Ix Hdsc Isuu Swing diameter over bed: 400 mm Swing diameter over carriage: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has been newly rewired and fitted with a new control cabinet. Emergency-stop switch and chuck guard installed 3-jaw chuck Ø 250 mm Live centre Four-way tool post Tool slide swivels approx. 30° to the right/left Taper turning attachment (cone 15° right/left) 4 change gears

Būklė: naudotas, Gamybos metai: 1986, Technical details: Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over faceplate slide: 200 mm Centre height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 RPM / only 6 selectable speeds, left-right Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (transversal): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Approx. machine dimensions LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel paths: Longitudinal slide = 580 mm, Cross slide = 170 mm - incl. tool rest (steady for turning) Dusdpsu Ix Hqofx Ac Ieu - incl. change gears - Steady rest Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 RPM) Sale as described.

Būklė: naudotas, Gamybos metai: 2004, Technical Details: Swing diameter over bed: 610 mm Swing diameter over cross slide: 350 mm Turning diameter over bed: 610 mm Distance between centers: 1,390 mm Control system: Fanuc 0i-Mate TC X-axis (cross travel): approx. 305 mm Z-axis (longitudinal travel): approx. 1,350 mm Spindle speed: 22 - 2,200 rpm Feed rate (X + Z axis): 5 / 10 m/min Spindle bore: Ø 70 mm Duedpfxju Ix I Uj Ac Ieu Tool turret - number of stations: 6 Tailstock quill taper: MT5 Tailstock quill stroke: 150 mm Approx. machine weight: 2.7 t Total power requirement: 15 kW Machine dimensions (LxWxH): approx. 3.7 x 1.7 x 1.7 m Hydraulics dimensions: 630 x 460 x 900 mm Additional features: - Hydr. power chuck TONFAU Ø 300 mm - Hydraulic system - Coolant unit - Control panel - Double foot switch Accessories: - Various form jaws - Various soft jaws - 6 foot rests

Būklė: naudotas, Gamybos metai: 2008, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Dedpfxjvvtpxs Ac Ieuu Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse on X-Y-Z axes: X/Z: 30 m/min / Y: 12 m/min C-axis rapid traverse speed: 1000 rpm Tool turret - number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical system - voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions (LxWxH) approx.: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions (LxWxH): approx. 2.9 x 0.6 x 0.55 (0.38 t) m Chip tray dimensions (LxWxH): approx. 1.6 x 1.3 x 0.25 (0.2 t) m Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features C-axis, E-axis, Y-axis, and W-axis. Driven tools possible in all turret stations. Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooling unit Including hinged belt chip conveyor Chip tray Compressed air gun Note: The machine is offered WITHOUT any chucks as shown!

Būklė: naudotas, Gamybos metai: 2011, Technical Details: Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Centre distance: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Spindle speed: 6,000 rpm Control: Heidenhain CNC Pilot 4290 Spindle bore: 73 mm Dusdpfx Asw S Efzsc Iou Bar capacity: 50 mm Tool turret – Number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X + Z axes: 30 m/min Machine on-time hours: 36,443 h Spindle hours: 8,545 h Interface: yes Total power requirement: 20 kVA kW Chip conveyor dimensions LxWxH: 3.2 x 0.45 x 1.5 m CNC slant-bed lathe Equipped with a 3-jaw chuck Ø 160 mm with matching flange (max. speed 4,500 rpm) and two additional sets of replacement jaws. Turret for 12 tools, all driven; Sauter disc turret (C-axis = 300 rpm). Main spindle torque: 95 Nm at 100% and 127 Nm at 40%. Chip conveyor 450 K-1/250; year of manufacture: 2000. Electrical cabinet with Rittal cooling. The machine is not equipped with a hydraulic chuck. A manual chuck has been fitted by the previous owner. The machine is offered for sale in non-functional condition. It has an unknown turret fault, therefore reference runs and axis movements are not possible. Machining functionality is currently not possible. The machine is being sold as defective / in need of repair! i.D.