Tiksliojo tekinimo staklės

Schaublin 102N-VM-CF high precision lathe

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Nwjdouxft Espfx Abbof Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 250 mm, ruošinio svoris (maks.): 200 kg, bendras aukštis: 2 372 mm, bendras plotis: 1 731 mm, bendras ilgis: 1 000 mm, stalo plotis: 630 mm, plunksnos brūkšnys: 250 mm, stalo ilgis: 400 mm, ruošinio ilgis (maks.): 800 mm, ruošinio plotis (maks.): 500 mm, ruošinio aukštis (maks.): 265 mm, GF AgieCharmilles FORM 20 Pagaminimo metai: 2017 AC-FORM HMI valdymas Ėjimo eigos: X=350 mm, Y=250 mm, Z=250 mm Didžiausias ruošinio dydis: X=800 mm, Y=500 mm, Z=265 mm Didžiausias ruošinio svoris: 200 kg Didžiausias elektrodų svoris: 50 kg Atstumas nuo stalo iki spaustuvo: 230 - 480 mm ISPG generatorius – darbinė srovė 80 amperų Njdsxf Dvqopfx Abbowf Geriausias pasiekiamas paviršius Ra 0,1 µm Linearūs stiklo liniuotės su 0,05 µm matavimo raiška Įeina pneumatinis Erowa ITS 50 spaustuvas Įeina 4 vietų elektrodų keitiklis žurnale Mašinos svoris (neto): 2000 kg Mašinos matmenys (I x P x A): 1000 x 1731 x 2372 mm Mašina bus išvalyta, aptarnauta ir išbandyta po užsakymo gavimo. Pagal pageidavimą taip pat galime atlikti mašinos paleidimą.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Completely overhauled BRUDERER stamping press BSTA300 including new press control system Technical Specifications: ----- Tonnage: 300 kN Die installation opening: 750 mm Stroke rate: 80–1400 (depending on selected stroke) Adjustable stroke: 13, 16, 19, 25, 32, 38, 44, 47 mm Njdpfxjtvnlbs Abbowf Ram adjustment range: 51 mm Die installation height: 171–239 mm (depending on selected stroke) Bolster plate: 740 x 480 mm Ram area: 630 x 360 mm Strip passage width: 206 mm Base plate opening: 710 x 160 mm Strip feed height: 50–120 mm Strip travel direction: left to right Feed type: Servo feed Machine weight: approx. 5,150 kg Machine color: RAL 1013 pearl white Add-on component color: RAL 7016 anthracite Control cabinet color: RAL 7035 light grey

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: used, very good, as new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed carriage travel: 350 mm Bed width: 205 mm Tool post cross section (H x W): 20 x 20 mm Height from compound rest to spindle axis: 30 mm Spindle nose according to ISO DIN 702-3 (DIN 55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Nwedsx Ivy Nspfx Abbjf Main spindle internal taper Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Face feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 Morse taper Weight, without packaging and accessories approx. 1,150 kg Dimensions (L x W x H), net: 1720 x 890 x 1700 mm Headstock / Rear cover / Sliding safety guard: Light grey RAL 7035 Machine base / Lathe bed: Basalt grey RAL 7012 Digital display housing: Blue NCSS 4550-R80B

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of Manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by appointment. Condition: Very good (high precision), immediately available for operation. Spindle hours (as of August 1, 2025): 9,580 h The core of the machine is the integrated travelling column with turning-milling spindle and interpolating B axis. Machine base data: * Partial hollow chucking device (hydraulic) * C axis * Upper cross-slide with turning/milling spindle as motor spindle, with hydraulic clamping for turning operations, spindle interface: Capto C6 * Y axis: +/- 200 mm * B axis: +/- 120° * Tool disc magazine * Absolute, direct linear measurement systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3D path control TURN PLUS Nedpfx Abow Hg Nlobewf Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1,510 mm * Maximum bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C axis speed: up to 5,000 rpm Turning-milling spindle: * Tool holder: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (approx. W/D/H): 6,860 x 4,220 x 2,530 mm * Total weight of the machine (approx.): 18.5 t EQUIPMENT: Good equipment ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical information and equipment details. Detailed technical data sheet and further equipment information available on request.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Universalus įrankių frezavimo staklės DECKEL FP 3 Su 3 ašių aktyviu skaitmeniniu indikatoriumi Heidenhain TNC 11 Pagaminimo metai: 1984 Važiavimo eiga: X 500, Y 300, Z 400 mm Apsisukimų intervalas: 25 – 2500 aps./min Su šia papildoma įranga: Standus kampinis stalas 850 mm x 400 mm tvirtinimo paviršius Pasukamas apvalus stalas Ø 450 mm su padalijimo diskais Pjovimo galva Stumdomas vertikalus frezavimo galvutė Ištraukiama gręžimo pinolė Njdpoxuh Rdjfx Abbjwf Besižingsnis padavimas per potenciometrą Įvairūs frezavimo dirželiai SK 40 / S22 x 2 Drožlių talpa Automatinis centrinis tepimo siurblys X, Y, Z ašims Staklių apšvietimas Aušinimo įrenginys 4 vnt. staklių kojelės Eksploatacijos instrukcija

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Heidenhain digital readout Fehlmann cross table KS 322 D Nwsdpfx Aewkrp Eobbsf Working area: Quill travel Z-axis: 110 mm Travel of machine head: 450 mm Table to spindle nose: 0 – 527 mm Quick-change system SF 32 Work spindle: 2.9 kW Continuously variable speed range: 50 - 6300 rpm Clamping surface: 320 x 670 mm Dimensions and Weight: Space requirement (W x D x H): 1.5 m x 1.35 m x 2.1 m Weight: approx. 850 kg

Būklė: geras (naudotas), Gamybos metai: 1970, For sale: Hilgeland model CH5AL header The machine is in perfect technical condition. Machine weight: approx. 20 tons The header is equipped with a comprehensive set of accessories. Loading provided. Maximum diameter of normalized bolt: 16 mm Maximum length: 200 mm Nedpfx Asu Szucebbewf

Būklė: labai geros būklės (naudotas),

Gamybos metai: 2024, būklė: naujas, oris- Extruder MINI ESE 20/25 D Technical Data Screw Diameter [mm]: 20 Nwedpfx Aehx Elfjbbof Screw Length [L/D]: 25 Screw Speed [rpm]: 20-200 rpm Screw Axial Pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency converter Drive Power [kW]: max. 2.5 Reduction Gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590 *) Electrical Connection Values: 3 / N / PE Supply Voltage [V]: 400 at 50 Hz Control Voltage [V]: 230 Temperature Control: Electric mica resistance heating bands Max. Processing Temperature [°C]: 300 Control Cabinet and Control Panel The electrical installation of the extruder is located in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; the water connection must be provided by the customer. A chiller unit for cooling the water is not included in the offer. Extruder tooling is not included in the scope of supply.