Centrinė tekinimo ir veleno tekinimo staklės

NILES-ZERBST DLZ 630III

Būklė: naudotas, Gamybos metai: 1963, Technical details: Swing diameter over bed: 1000 mm Itjdpfsu Ix Arsx Agfed Swing diameter over cross slide: 620 mm Turning length: 3150 mm Centre distance: 3150 mm Swing diameter in gap: 1200 mm Gap length: 800 mm Approx. machine weight: 11.5 t Approx. machine dimensions (LxWxH): 7.5 x 1.5 x 1.7 m Including 2 steady rests and various centres

Būklė: labai geros būklės (naudotas), Ansemi parallel lathe, model Mono FAP 325 ES, distance between centers: 1500 mm, center height: 325 mm, spindle bore: 65 mm, motor power: 18 kW, overall dimensions: 3300 x 1200 x 1700 mm (H), weight: 3260 kg. Itjdjwcd Hmopfx Agfed

Būklė: naujas, Bernardo Horizontal Bandsaw HBS 275 – 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H):1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw band • Workpiece stop • Base frame • Pressure gauge for band tension • Vice with quick-action clamp • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off Itedpfx Aod Du T Isgfsd

Būklė: naujas, Delivery pressure 11 bar Iedpevkizgefx Agfstd Suction capacity 480 cm³ Flow rate 360 Tank capacity 270 l / bar Number of cylinders 1 pc. Motor 400 Volt / 3.0 kW V / kW Speed 892 rpm Machine weight approx. 200 kg Dimensions (L x W x H) 1.6 x 0.7 x 1.2 m

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBHF-KBK1, DEMAG KBK Crane Ceiling Crane Runway, dimensions approx. 12m x 3.5m Itsdpepiarnsfx Agfsd Other dimensions available on request! Load capacity / lifting capacity: 125 KG - 0.125 t Technical data of the system: - Crane runway made from Demag KBK1 rails System is delivered complete: - KBK rails, rail connectors, traveling gears, end plates, cable trolley, power supply, supports/hangers, etc. Includes 1 bridge with 125 KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Dispatch by freight or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacity 125KG - 1600KG Please inquire about your crane runway with required load moment and dimensions.

Būklė: naudotas, Techniniai duomenys: Sukimosi skersmuo virš lovos: 560 mm Sukimosi skersmuo virš stumdomos dalies: 280 mm Sukimo ilgis: 2000 mm Centru aukštis: 280 mm Centru atstumas: 1600 mm Darbinio veleno skylė: 65 mm Sūkių diapazonas: 9...1800 / 24 žingsniai aps./min Išilginiai padavimai: 0,025-0,09 mm/apl Skersinis padavimas: 0,012-0,045 mm/apl Grąžto movos eiga: 225 mm Grąžto movos kūgis: MK5 Bendras energijos poreikis: 18 kW Apytikslis įrenginio svoris: 3,8 t Itjdpfxswa I She Agfed Apytiksliai matmenys (IxPxA): 3,7 x 1,6 x 2,05 m Trijų žandikaulių griebtuvas D=320mm Viršutinė slankiojanti dalis pasukama 45° į dešinę ir į kairę

Būklė: naujas, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Weight approx.: 1.2 t Dimensions (LxWxH): Length 2400 mm, Width/Depth 2160 mm, Height 2300 mm, Weight 1200 kg Spindle speed: 60 – 4200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High concentricity accuracy due to tapered roller bearings, measured at less than 0.01 mm in the quill - Infinitely variable speed control - Clockwise/anti-clockwise rotation for thread cutting - X and Z axes with adjustable 55° dovetail guides - Y axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Clockwise and anti-clockwise rotation - Automatic quill feed, 3 steps, 0.04–0.15 mm/rev - Motorized feed on X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant channel - Central lubrication - Height-adjustable safety shield with microswitch, protects against flying chips and parts for maximum operator safety - Robust and large dimensioned cross table, precision machined with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel range: X / Y / Z axes 740 mm / 330 mm / 320 mm Isdpfed H Hhzox Agfstd Dimensions and weights Length 2400 mm Width/Depth 2160 mm Height 2300 mm Weight 1200 kg Drilling and milling performance Max. face mill diameter: 76 mm Max. shank milling cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Network frequency: 50 Hz Horizontal milling table Length: 254 mm Width: 1370 mm Max. vertical spindle to milling table distance: 405 mm T-slot size: 16 mm T-slot number: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0 – 420 mm Coolant system Coolant pump(s) drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC category: C2 Travel X axis manual: 820 mm Y axis manual: 410 mm Z axis manual: 400 mm X axis automatic: 740 mm Y axis automatic: 330 mm Z axis automatic: 320 mm Vertical spindle Overhang: 0 – 420 mm Spindle taper: ISO 40 DIN 2080 Speed range: 60 – 4200 rpm Number of speed ranges: 2 Speed control: mechanical, stepless Milling head swivel range X-Y plane: 90° Milling head swivel range Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head vertical travel Z axis: 470 mm Package unit: 1

Gamybos metai: 2017, būklė: beveik kaip naujas (naudotas), used RENNER REKO 550/50VE air compressor 10 bar with petrol engine For operations without a power supply (e.g. roadside assistance vehicles or tyre service) The compressor is used, year of manufacture 2017, and has 50 operating hours. The petrol-driven, robust piston compressors offer you, in addition to the well-known advantages of RENNER systems, especially flexible compressed air availability on construction sites, in service vehicles, and for many other applications "without a socket". They guarantee a consistent supply of compressed air, independent of location. The smaller model is mobile and can be quickly relocated thanks to its ergonomic handle, while the larger version can be easily moved and loaded onto vehicles by pallet truck or forklift due to its compact design. VE = electric start. Please note: delivered without battery. Technical data: - Intake capacity: 550 l/min - Effective delivery rate: 400 l/min - Petrol engine: 3.6 kW Honda unit with 4.8 HP - Max. pressure: 10 bar - Cylinders/stages: 2/1 - Speed: 1400 RPM - Sound pressure level: 98 dB(A) - Air receiver: 50 l Ijdpfx Aod H Dr Segfotd - Dimensions (L x W x H): 810 x 460 x 830 mm - Weight: 70 kg Visit our store in Erlangen. We have a wide selection of new and used compressors.

Būklė: naujas, Gamybos metai: 2026, Table saw with extension table on the right, straight and angle fence. This machine incorporates many solutions typically found in more expensive devices of this type. An excellent price-to-performance ratio has been achieved without compromising on quality or versatility. Machine Description The innovative table saw combines a powerful, precise, universal and compact design. It has been developed for small joinery workshops, furniture manufacturers, and craftsmen. The machine features many solutions commonly used in higher-end equipment. The outstanding price-performance ratio is achieved without sacrificing quality or universality. Included: 250 x 30 x 2 mm carbide-tipped circular saw blade Iedpfxsvxhi Es Agfstd MAXIMUM BLADE/BORE DIAMETER: 254 x 30 mm BLADE SPEED: 4000 rpm BLADE TILT RANGE: 90 – 45° MAXIMUM CUTTING DEPTH AT 45º: 65 mm MAXIMUM CUTTING DEPTH AT 90º: 80 mm CUTTING WIDTH WITH TABLE EXTENSION: 750 mm MAXIMUM CUTTING LENGTH: 1000 mm EXTRACTION PORT: 100/25 mm WORK TABLE DIMENSIONS: 635 x 420 mm WORK TABLE DIMENSIONS WITH EXTENSION: 635 x 1500 mm MOTOR POWER: 2.2 kW (S1) 400V / 3.1 kW (S6) WEIGHT: 110 kg DIMENSIONS: 1450 x 1000 x 1100 mm Manufacturer: Cormak

Būklė: naujas, Gamybos metai: 2025, Yanigav Earth Auger TAMD245 • Simple three-point hitch • Very robust, welded, machine-fabricated chassis Iodpfxer Eznis Agfetd • Versatile, high-performance gearbox for 30 to 90 HP • Usable augers from 10 cm to 80 cm diameter and up to 1.80 m length • Offset of 1.30 m on each side of the axis • Chassis length: 245 cm • Drill bit not included