Kunzmann Ba 600 pirkti naudotą (67)

Sąlyga: naudotas, Gamybos metai: 2004, Darbo valandos: Valdymas įjungtas: 3123 val. Staklės įjungtos: 2970 val. Programos veikimo laikas: 902 val. Bcsdpfxjwglape Abfsu Veleno darbas: 988 val. Techniniai duomenys: X/Y/Z eigos: 650 / 500 / 450 mm Tvirtinimo paviršius: 1000 x 600 mm Veleno tvirtinimas: SK 40 Veleno greitis: 12 000 aps./min. Maks. stalo apkrova: 400 kg Įrankių žurnalo vietų skaičius: 20 Galia: 24 kVA Staklių svoris, apie: 5500 kg Įranga: - Valdymas Heidenhain iTNC 530 - 20 vietų įrankių keitiklis - Heidenhain įrankių matuoklis - Heidenhain ruošinio matuoklis - Heidenhain rankinis ratukas - Menzel minimalaus kiekio tepimas - Apie 25 įrankių laikiklių

Sąlyga: naujas, Gamybos metai: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain path control TNC 128 Axes travel X/Y/Z = 610/400/450 mm Speed range 1–4,500 rpm Bodpfx Asuf Sv Dsbfjcu Power 8.5 kW at 100% duty cycle Spindle SK40 DIN 69871 (Type AD) with clamping bolt DIN 69872 Fixed angle table 800 x 425 mm, 6 x 14 H7 T-slots Coolant system 66 liters Electronic handwheel HEIDENHAIN HR 510 FS Further technical data available upon request. The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available, and can be inspected by appointment. Please arrange your visit in advance.

Sąlyga: naudotas, Gamybos metai: 1982, mašinos/transporto priemonės numeris: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Year of manufacture: 1982, 2 gearbox stages 1400/2800 rpm, Table size: 860x240mm, 3 T-slots 14mm, spindle mount SK30, Bcjdpfx Abjiqkc Ijfou Travel paths: X/Y/Z = 450/200/430mm, horizontal speeds: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 vertical milling arbor supports, 1 collet chuck with key, 1 machine vice with hand crank.

Sąlyga: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF 410M with Heidenhain TNC 128 Control, LIKE NEW, CE Compliant!! Technical Data: >> Year of manufacture: 2022 Machine No. 411555 >> Clamping surface of milling table: 650 x 375 mm T-slots: 5 T-slot width: 14 H7 T-slot spacing: 63 mm Maximum load: 250 kg >> Spindle speed range: 1–4500 rpm >> Feedrate X, Y, Z axes (stepless): max. 5/5/4 m/min >> Travel X/Y/Z: 410/350/450 mm >> Vertical and horizontal quill - SK40 >> Hydraulic drawbar system >> Approx. weight: 2000 kg >> Approx. dimensions: 2 x 2 x 2 m >> Connected load: 13 kVA Equipment and Accessories: >> Heidenhain TNC 128 control >> Heidenhain HR 510FS electronic handwheel >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions >> Machine lamp >> Minimum quantity lubrication >> Counterstay >> Digital display for quill travel >> Oriented spindle stop (thread cutting without compensating chuck) >> Chip guard enclosure >> Edge finder KT 130 >> Coolant system >> Rotary table 200 mm >> Indexing device with 125 mm three- and four-jaw chuck Bcodpfx Absv Rppkjfeu >> 125 mm hydraulic vise About the Machine: For sale is a tool milling machine Kunzmann WF 410M, year of manufacture 2022, LIKE NEW, equipped with a Heidenhain TNC 128 control. The TNC 128 offers numerous user-guided cycles with graphic simulation for quick and simple data entry, e.g.: various drilling cycles, thread cutting, bolt circles, hole rows, rectangular pockets, rectangular bosses, and surface milling. The control unit is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the tiltable vertical head. The guides are lubricated regularly by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the Kunzmann under power at our location.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Very Good Condition, CE Certified! Bcjdjwrhxfspfx Abfsu Technical Specifications: >> Year of Manufacture: 2006, Machine No. 348013 >> Fixed angular table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic tool clamping system >> Weight approx. 1,800 kg >> Required space approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Equipment and Accessories: >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered here is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition. It comes from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. Moreover, the machine features hydraulic clamping both vertically and horizontally. Switching between vertical and horizontal operation is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Milling Machine Kunzmann WF7/3 with Heidenhain TNC 310 CNC Control – Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2004 Machine No.: 370506 >> Milling table clamping surface: 800 x 425 mm T-slots: 6 T-slot width: 14 H 7 T-slot pitch: 63 mm Maximum table load: 300 kg >> Spindle speeds up to 4,500 rpm >> Feed range up to 2,000 mm/min Rapid traverse up to 5,000 mm/min >> Travel axes X/Y/Z: 600/400/400 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic drawbar system >> Weight approx. 2,000 kg Bsdswpkchepfx Abfjcu >> Dimensions approx. 2 x 2 x 2 m >> Main drive motor: 5.5 kW Additional Equipment and Features: >> Heidenhain TNC 310 CNC control >> Vertical and horizontal hydraulic clamping >> Automatic central lubrication >> Spindle brake >> Electronic handwheel >> Heidenhain probe >> Technical documentation, spare parts manuals, operating instructions >> Full safety enclosure >> Coolant system About the Machine: Offered here is a Kunzmann WF7/3 tool milling machine with Heidenhain TNC 310 CNC control. This universal milling machine is in excellent condition. The control system is user-friendly and easy to operate. The machine features hydraulic clamping for both vertical and horizontal operations. Changing from vertical to horizontal milling is straightforward thanks to the swing-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control – Excellent Condition, CE Compliant! Technical Data: - Year of manufacture: 2008 - Machine No.: 348084 - Fixed angle table Bcedpfjv Dut Iox Abfeu - Speed: infinitely variable up to 4,500 rpm - Feed rate: stepless in 3 axes from 0 to 2,000 mm/min - Rapid traverse: - X and Y axis: 5,000 mm/min - Z axis: 4,000 mm/min - Travel X/Y/Z: 400/350/400 mm - Table surface: 650 x 350 mm - Table load: 250 kg - Vertical quill stroke: 60 mm - Both vertical and horizontal spindle with SK40 taper - Hydraulic clamping system - Approximate weight: 1,800 kg - Required space (LxWxH): approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contouring control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operating manual for the control, and programming samples - Handwheels - Coolant system - Electronic handwheel HR410 About the machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring control. This universal milling machine is in excellent condition. It comes from a facility where it was only used infrequently for training purposes. The control system is very user-friendly. In addition, the machine features hydraulic clamping for both vertical and horizontal operations. Changing from vertical to horizontal is very simple thanks to the pivoting vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann on site under power.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Year of manufacture: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in operation; test runs can be performed during inspection; Good technical condition; Folding machine manufactured by the renowned German company GUK, equipped with a high pile automatic feeder (sheet feeding by top suction roller) FL2-50, 2 folding units, both buckle folding units with a maximum working width of 50 cm, and stream delivery. GUK folding machine model FA 50/6-6 FL2-50 – feed width up to 50 cm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: 45 mm Sheet feeding speed from the automatic feeder: 40 - 180 m/min Bedpfx Absrx S Iwsfscu Maximum output: up to 27,000 A4 sheets/hour Electrical supply: 400 V / 50 Hz Machine features: High pile automatic feeder FL2-50; Multifunction counter for programming machine operation. Enables folding of sheets in groups (batches) with a set quantity per batch, including stepless adjustment of intervals between batches. First folding unit FA 50/6, 6 folding pockets; Soundproof cover for the upper side of the first folding unit. Second folding unit FA 50/6, 6 folding pockets; Soundproof cover for the upper side of the second folding unit. Stream delivery S 520; Can be attached after the first or second folding unit.

Sąlyga: naudotas, Gamybos metai: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm Tool holder SK 40 Spindle speed 1.0 - 4,000 rpm Feed rates 0 - 2,000 mm/min Quill stroke 60.0 mm Table size 650 x 350 mm T-slots 14 H7 Control unit TNC 124 Motor power 5.5 kW Weight 1,800 kg Required space approx. 2,000 x 1,000 x 2,100 mm Original price ~ €55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN path control TNC 124 - Swiveling control panel, positioned to the right of the machine - Hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed: 0 - 2,000 mm/min - Y-axis feed: 0 - 2,000 mm/min - Z-axis feed: 0 - 2,000 mm/min - Centralized lubrication, electric - Coolant system - Chip tray - Operating manual for machine and control unit Special accessories included: - Hydraulic machine vice - Numerous tool holders - Electronic handwheel HEIDENHAIN HR 410 Bcedpfx Asw U U Siebfeu

Sąlyga: geras (naudotas), Horizontal milling attachment – Counterholder for KUNZMANN milling machines, WF series. Bcedpfxevr Stuo Abfeu This was an accessory for a KUNZMANN WF 4/3 TNC 124. There are 2 units available. The current list price at Kunzmann is over €2,000 plus VAT. With an appropriate adapter plate, it should also fit other machines (e.g. EMCO, MIKRON, DECKEL, FPS, etc.). Net price ex stock.

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 400 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, For sale is a milling machine from Kunzmann, model WF 4/3. The machine is fully functional and ready for immediate use. Technical specifications: Control: Heidenhain TNC 124 Year of manufacture: 1996 X-axis travel: 400 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Rigid angle table, clamping surface: 650 x 350 mm Maximum load: 250 kg Main drive AC motor: 5.5 kW Feed drives: separate AC drives Infinitely variable feed rate: 0–2,000 mm/min Tool holder: SK 40 Speed range: 1–4,000 rpm Quill, vertical: stroke 60 mm Swivel range vertical milling head: ±90° Tool clamping: hydraulic Direct, distance-encoded linear measurement systems resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441: 0.015 mm Operating voltage: 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg Bedpfxevftrxe Abfecu Transport and loading can be organized Europe-wide on request, subject to an additional charge. Prices are plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you! Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Kunzmann WF 410 M frezavimo staklės (2022) Gamintojas: Kunzmann Tipas: WF 410 M frezavimo staklės Pagaminimo metai: 2022 Būklė: naudota, labai gera, kaip nauja Įjungimo valandos: 2355 h Veleno darbo valandos: 253 h X krypties eiga: 410 mm Y krypties eiga: 350 mm Z krypties eiga: 450 mm Pagrindinis pavara (100 %/25 % darbo ciklas): 6,8/13,0 kW Apsisukimų dažnis: 1–4500 aps./min Įrankio laikiklis: SK 40 DIN ISO 7388-1 Pjovimo greitis iki 5 m/min Svoris apytiksliai: 2 000 kg Kampinis stalas, fiksuotas Tvirtinimo paviršius: 800 x 425 mm T-grioveliai: 6 x 14 H 7 Stalo apkrova maks.: 300 kg Aušinimo skysčio sistema Mašinos šviestuvas Horizontalus frezuojantis velenas su pavarų dėže Komplektacija: – El. rankenėlė HR 510 Bcodpfjx Ni U Nox Abfou – Originali dokumentacija Be spaustuvo.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, X ašies eiga: 600 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 1 aps./min, plunksnos brūkšnys: 60 mm, bendras aukštis: 2 000 mm, bendras plotis: 2 000 mm, bendras ilgis: 2 000 mm, stalo plotis: 425 mm, stalo ilgis: 800 mm, bendras svoris: 2 000 kg, ruošinio svoris (maks.): 250 kg, Travel distances X/Y/Z 600/400/400 mm, spindle speeds 1 - 4500 rpm, motor 7.5 kW, spindle taper SK 40, control Heidenhain TNC 124, table size 800x425 mm, hydraulic tool clamping, edge finder, swiveling milling head, coolant system, tool holders, electronic handwheel, operating manual Bedpfew Ay N Djx Abfscu

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Kunzmann WF 410 MC universalioji frezavimo staklės (2021) Gamintojas: Kunzmann Modelis: WF 410 MC frezavimo staklės Pagaminimo metai: 2021 Būklė: labai gera, kaip nauja, mažai naudota Valdymas: HEIDENHAIN TNC 620 X eiga: 410 mm Y eiga: 350 mm Z eiga: 450 mm Pagrindinė pavara (100%/25% ED): 6,8/13,0 kW Bjdox Ivypspfx Abfecu Sukimosi greičių diapazonas: 1–5 000 aps./min. Įrankio tvirtinimas: SK 40 DIN ISO 7388-1 Padavimo diapazonas iki 5 m/min Svoris apie 2 000 kg Kampinis stalas, fiksuotas Tvirtinimo paviršius: 800 x 425 mm T formos grioveliai: 6 x 14 H 7 Stalo apkrova maks. 300 kg Aušinimo sistema Įrengtas mašinos apšvietimas Horizontalioji frezavimo galvutė su pavara Komplektacija: – Elektrinis rankinis valdymo pultas HR 510 – Originali dokumentacija – Įskaitant įrankių matavimo prietaisą – Įskaitant 20 įrankio tvirtinimų

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control – Excellent Condition, CE Compliant! Technical Data: - Year of manufacture: 2003 Machine no.: 344174 - Rigid angle table - Spindle speed: stepless up to 4,000 rpm - Feed: infinitely variable in 3 axes from 0 to 2,000 mm/min - Travel (X/Y/Z): 400/320/400 mm - Table size: 650 x 350 mm - Table load: 250 kg - Quill stroke vertical: 60 mm Bsdpfox Elxpjx Abfocu - Vertical and horizontal quill – SK40 taper - Hydraulic clamping system - Weight approx. 1,800 kg - Required space approx.: 2.3 x 2 x 2 m - Drive capacity: 12 kVA Accessories and Equipment: - Heidenhain TNC 124 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control operation manual, and programming examples - Handwheels - Coolant system - Heidenhain electronic handwheel About the machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with the Heidenhain TNC 124 control. This universal milling machine is in excellent condition. It comes from a facility where it was used predominantly for training purposes and saw little actual machining. The control unit is very intuitive and user-friendly. The machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is extremely simple thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. Our team has mechanically and electrically inspected the Kunzmann. You are welcome to view and test the machine under power at our facility. The machine is immediately available.

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Prieinamumas – iš karto Gera techninė būklė Bodpfx Aexn Sy Nobfscu Vieta – Varšuva Konfigūracija: - Aukšto stovo padavėjas - Garso izoliaciniai gaubtai - Valdiklis su skaitikliu ir partijų žymėjimu - 6 lankstymo kišenės - 2 lankstymo peiliai - Mobilus srauto išvedimas TECHNINIAI PARAMETRAI Didž. įėjimo formatas: 52 x 80 cm (lygiagretus lankstymas) Maž. įėjimo formatas: 15 x 19 cm (lygiagretus lankstymas); 15 x 19 cm (kryžminis lankstymas) Popieriaus gramatura: min. 40 g/m², maks. 300 g/m² Minimalus lankstymo ilgis: 45 mm

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Universal Tool Milling Machine Brand: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 – partially overhauled, newly painted, Bedpfx Asm Nbwtsbfecu RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine no.: 344025 with warranty Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D probing system for detecting workpiece position for determining workpiece reference points for measuring finished parts incl. Weldon collet chuck SK40/Ø 16 mm - Universal table 650 x 395 mm (T-slot: 14 mm) tiltable on 3 axes rotatable 360° (displayed as the 4th axis digitally in the control) swivels +/- 30° tilting range towards the machine 45° tilting range away from the machine 15° centering bore Ø 32 mm table load 150 kg - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant device - Splash guard enclosure, movable, electrically secured - Operating manual Used, sold as seen Technically the machine complies with the standard of its year of manufacture.

Sąlyga: naudotas, Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture: 1998 Travel distances X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed range 40 - 2500 rpm Feed rates X, Y and Z axes 0 - 1000 mm/min, infinitely variable Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill travel vertical 60 mm Spindle drive power 3 kW Electrical connection 400 Volt, 50 Hz - CNC contouring control Heidenhain TNC 124 - Spindle speed via 2 gearbox stages and infinitely variable electronic variator drive - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet fixed to machine - Coolant tank with pump adjacent - Centralized lubrication system - Lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Bjdpfx Aolvyrbjbfocu In good condition

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 2009, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 370791, padavimo ilgis X ašis: 800 mm, padavimo eiga Y ašimi: 400 mm, padavimo ilgis Z ašis: 400 mm, veleno greitis (maks.): 4 500 aps./min, stalo plotis: 420 mm, stalo ilgis: 800 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the specified period from 28.07.2025 to 31.07.2025. Bsdpjwvi T Esfx Abfecu TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Feed rate X-axis: 2,000 mm/min Feed rate Y-axis: 2,000 mm/min Feed rate Z-axis: 2,000 mm/min Rapid traverse X-axis: 5,000 mm/min Rapid traverse Y-axis: 5,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Spindle Spindle speed: 1 - 4,500 rpm Tool holder: 40 mm Speed range 1: 1 - 1,125 rpm Speed range 2: 1,125 - 4,500 rpm Table Table width: 420 mm Table length: 800 mm MACHINE DETAILS Overall height: 2,000 mm Overall width: 1,750 mm Overall length: 1,750 mm Total weight: 1,800 kg Machine weight: 2,025 kg Input frequency: 50 Hz Operating voltage: 400 V Power consumption: 13 kVA EQUIPMENT - The machine vise visible on the table surface is not included in the scope of delivery.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain Digital Readout, Year of Manufacture 1994, Excellent Condition!! Technical Data: >> Year of manufacture: 1994 Bcodpfxjvyr R Ns Abfou >> Fixed angle table >> Spindle speeds from 40 to 2550 rpm >> Infinitely variable feed rate in X, Y, Z axes from 0 to 2000 mm/min >> Travel paths X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Quill stroke (vertical): 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the Machine: Offered is a Kunzmann WF4/3 universal milling machine in very good condition. It comes from a government facility where it was only lightly used. Conversion from vertical to horizontal operation is very simple, thanks to the folding vertical head. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our premises.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition | CE Compliant | Ex-Training Workshop! Technical Data: >> Year of manufacture: 2010 | Machine No. 347283 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse: X and Y axis 5,000 mm/min | Z axis 4,000 mm/min >> Travel x/y/z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories & Equipment: >> Heidenhain TNC 320 path control Bsdpfxjxuppue Abfocu >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts manuals, control unit operating instructions, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About This Machine: We offer here a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 path control unit. This machine is in excellent condition with very low operating hours, coming from an educational facility where it was used solely for training purposes. The TNC 320 features an intuitive, easy-to-use control interface. Both vertical and horizontal clamping are hydraulically operated. Changing from vertical to horizontal operation is extremely straightforward thanks to the pivoting vertical head. The machine’s guides are regularly lubricated by the central automatic lubrication system. This Kunzmann has been mechanically and electrically tested in our facility. Take advantage of the opportunity to inspect and test the Kunzmann powered up on-site. We currently have 7 units of the Kunzmann WF4/3 with Heidenhain TNC 320 milling machines available. The machines are immediately available.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contouring Control in Excellent Condition – CE Compliant, from Training Workshop! Technical Data: >> Year of construction: 2010 Machine No.: 347284 >> Fixed angular table >> Speed: stepless up to 4,500 rpm >> Stepless feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axis: 5,000 mm/min, Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Max. table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx.: 2.3 x 2 x 2 m Bsdpfx Aexupdlebfocu >> Drive power: 15 KVA Features and Accessories: >> Heidenhain TNC 320 contouring control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts lists, control operating manual, and programming samples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 contouring controller. This universal milling machine is in excellent condition, with only minimal operating hours, and originated from a facility where it was used solely for training purposes. The controller is particularly easy to operate. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple due to the swing-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann on-site under power. A total of 7 Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control are available. Machines are in stock and immediately available.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE-compliant, from a Training Workshop! Technical Data: >> Year of manufacture: 2010, Machine No. 347247 >> Fixed angle table Bjdpfx Abjxupc Uefjcu >> Infinitely variable speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Max. table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Floor space required: approx. 2.3 x 2 x 2 m >> Power requirement: 15 KVA Equipment and Accessories: >> Heidenhain TNC 320 contour control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 contour control. This machine is in excellent condition with very low operating hours and was only used for training purposes. It features very user-friendly controls. The machine also offers hydraulic clamping in both vertical and horizontal orientations. Changing from vertical to horizontal mode is quick and simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the automatic central lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. You are welcome to view and test the machine under power at our premises. There are 7 units of the Kunzmann WF4/3 with TNC 320 Heidenhain control available. The machines are ready for immediate delivery.

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Kunzmann WF 7 CNC Milling Machine TNC 410 Control Manufacturer: Kunzmann Model: WF 7 Year of manufacture: 2001 Condition: used, powered Control system: Heidenhain TNC 410 X-travel: 610 mm Y-travel: 400 mm Bsdpfoxwl Ufex Abfjcu Z-travel: 400 mm Spindle taper: SK 40 Spindle speed: 1–5000 rpm Tilting / Swiveling table Scope of delivery: – Documentation – Various tool holders

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, veikimo valandos: 12 959 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 650 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 450 mm, veleno greitis (maks.): 12 000 aps./min, bendras aukštis: 2 450 mm, bendras plotis: 2 400 mm, bendras ilgis: 3 100 mm, stalo plotis: 630 mm, stalo ilgis: 630 mm, stalo apkrova: 350 kg, bendras svoris: 6 800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Centre (2009) Bcsdsxwl T Uopfx Abfou Manufacturer: Kunzmann Model: WF 650 5-Axis Simultaneous Machining Centre Year of Manufacture: 2007 Commissioning: 2009 Condition: Used, very good Machine ON Time: 46,181 hours Spindle Hours: 12,959 hours Control System: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-Axis Travel: 650 mm Y-Axis Travel: 500 mm Z-Axis Travel: 450 mm Swivelling Range of Vertical Milling Head: -5° to +95° NC Rotary Table Diameter: 630 mm Table Load Capacity: 350 kg Spindle Speed: 12,000 rpm Tool Holder: SK40 Tool Changer for 20 Tools IKZ: Tool clamping with coolant supply and blow-out device through the spindle; delivery rate 25 l/min at 40 bar Selectable water/air through spindle Paper band filter CNC-controlled Milling Head (B-Axis) Preparation kit for touch probe TS 640 3D Probe with Infrared Transmission Dimensions (LxWxH) approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant System (LxWxH) approx.: 1.6 x 2.0 x 0.5 m Scope of delivery: – Documentation – Machine feet – Machine lamp