Kellenberger pirkti naudotą (89)

Būklė: labai geros būklės (naudotas), Kellenberger 1000U apvali šlifavimo staklės su daug priedų parduodamos už patrauklią kainą. Šios staklės yra labai geros būklės ir visiškai veikiančios. 2019 metais pirktos po kapitalinio remonto. Kaina ženkliai sumažinta! Dcsdpfewkt Euex Am Doi

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Kellenberger apvalių paviršių šlifavimo staklės labai geros būklės. Parduodamos už palankią kainą. Kaina ženkliai sumažinta !!!!! Dodpjw Dy Rqjfx Am Dsci

Būklė: naudotas, Gamybos metai: 1977, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speeds: 1,500 / 1,700 / 2,200 rpm Infeed incrementally: 0.001–0.030 mm/Ø Infeed continuously: 0–0.95 mm/Ø Table swivel: ±8° Table longitudinal travel: 1,300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 × 2.0 m Originally supplied new to university. Taken over in 2018. Then fully serviced at BEMA and delivered to a single-operator workshop. The machine will now be serviced again and the table geometry remachined. 2-axis Fagor digital readout retrofitted. – Tailstock with fine adjustment – Internal grinding device – Coolant system Dcsdpfx Aeynmpgem Dji Additional accessories available on request.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 630005, centro aukštis: 305 mm, plotis centre: 1 000 mm, X ašies eiga: 350 mm, Z ašies eigos atstumas: 1 160 mm, valdiklio modelis: KELCO 90, TECHNICAL DETAILS Centre Height: 225 mm / 305 mm Centre Distance: 1,000 mm Z-Axis Travel: 1,160 mm X-Axis Travel: 350 mm Max. Workpiece Weight: 200 kg Workpiece Diameter: 449 mm Left Grinding Wheel Diameter: 500 mm Left Grinding Wheel Width: 80 mm Left Grinding Wheel Bore: 203 mm Right Grinding Wheel Diameter: 400 mm Right Grinding Wheel Width: 40 mm Right Grinding Wheel Bore: 127 mm B-Axis Swivel Range: +30° / -190° Max. Grinding Wheel Speed: 1,720 rpm Peripheral Speed: 45 m/s Workpiece Spindle Speeds From: 5 rpm Workpiece Spindle Speeds Up To: 500 rpm Spindle Taper: MK 5 Tailstock Quill Mount: 4 Morse Taper Tailstock Quill Travel: 50 mm X-Axis Feed: 8 m/min Z-Axis Feed: 16 m/min Max. Table Swivel: -1° / +11° MACHINE DETAILS Control: KELCO 90 Total Power Requirement: 25 kW Connection: 50 Hz, 3x 380 Volt Dcsdpfx Aeyhnrvem Doi Dimensions & Weight Machine Dimensions (L x W x H): 2,850 x 2,200 x 2,100 mm Control Dimensions (L x W x H): 550 x 450 x 900 mm Machine Weight: approx. 6,000 kg EQUIPMENT - 80 mm Raise / Height Extension - Coolant System - Automatic Tool Measurement KELSET - Dressing Device - Internal Grinding Attachment (without spindle) - Set of Flanges - Set of Grinding Wheels - Balancing Arbor - Lamp - Magnetic Chuck Diameter (2x): 300 mm / 500 mm - Electronic Hand Control Panel

Būklė: geras (naudotas), cilindrinės šlifavimo staklės Dcjdpfx Ametrguke Dei

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workpiece headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, overhauled. Hydraulics Disassembled, motor check, replacement of hoses, defective and worn parts. Hydraulic block inspected. X Axis Disassembly, replacement of worn parts such as O-rings, seals, rings, etc., overhaul of hydraulic piston, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical cabinet Complete inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer’s protocol. Inspection and cleaning of various accessories. Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff number 8460.2920 TECHNICAL SPECIFICATIONS Nominal centre distance 600 mm Max. centre distance (extended headstock) 750 mm Djdpfxew U Ry Ns Am Doci Centre height, standard 125 mm Centre height with interchangeable shoes for headstocks 175 to 250 mm Max. workpiece diameter (125 mm centre height) 250 mm Max. workpiece diameter with interchangeable shoes 350 to 500 mm Table swivelling in either direction 10° Max. length for surface grinding (max. width = 200 mm) 900 mm Table speed with continuously variable hydraulic control up to approx. 6 m/min Table reversal dwell time 0-5 sec. Wheel for external grinding, diameter-width-bore 400x50x127 mm Wheel for surface grinding 250x13x76 mm Grinding spindle speeds 1500/1700/2200/3600 rpm Grinding headstock swivel 270° With index every 90° Vertical movement of grinding headstock, centre height 125-350 mm Cross travel of grinding headstock 285 mm Hydraulic rapid advance/retract stroke 40 mm Intermittent feed of the wheel by table reversal 0.001-0.03 mm/dia Continuous plunge grinding feed 0-0.9 mm/dia Micrometric feed stop, graduated 0.001 mm/dia Workpiece headstock swivel 360° Continuously variable workpiece spindle speed, standard/special 20-400 / 10-400 rpm Workpiece headstock/tailstock internal taper 5/3 Morse Grinding headstock motor, approx. 4 HP All technical details are given without obligation and subject to errors or omissions.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, belt replacement. New spindle bearings. Newly painted. Tailstock Dcjdpfx Ajxt Ilfem Dei Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, belt replacement. New spindle bearings. Newly painted. Internal Grinding Attachment Disassembly, cleaning of parts, replacement of worn and defective components, assembly of the mounting and alignment of geometry. Newly painted. Hydraulics Disassembly, motor replacement, replacement of hoses and worn or defective parts. Hydraulic block checked. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, table grinding. Z Axis Disassembly, table grinding, replacement of worn and defective parts, hydraulic piston overhaul, scraping of V and flat guides. Newly painted. Measuring System 2-axis digital readout included Electrical Cabinet Replacement of motor terminals and relay controls. New wiring. New frequency inverter for the workhead. TECHNICAL SPECIFICATIONS Distance between centers 1500 mm Distance between centers (headstock and overhanging tailstock) 1650 mm Center height, standard 125 mm Center height with raising blocks 225/250 mm Maximum grinding diameter Ø 250 mm Maximum grinding diameter with raising blocks 450/500 mm Table Usable surface 2060x140 mm Maximum length and width for surface grinding 1750x200 mm Manual or hydraulic longitudinal travel 1750 mm Manual table movement per handwheel revolution – coarse 20.006 mm Manual table movement per handwheel revolution – fine 2.457 mm Continuous table speed, hydraulic –6 m/min Table swivel 6° Stop, return 0–5 sec. Work Spindle Workpiece speeds, continuously variable 20–400 min-1 Swivel 360° Work spindle internal taper MT5 Tailstock Tailstock spindle internal taper MT3 Manual or hydraulic spindle retraction travel 30 mm Dressing diamond internal taper MT0 Universal Grinding Head Transverse wheel slide travel 285 mm Rapid traverse, wheel slide (forwards & backwards) 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 min-1 Vertical movement of grinding spindle, center height 125–330 mm Cylindrical grinding wheel, max 400x50x127 mm Surface grinding wheel, max 250x20x76 mm Swivel of grinding head with locking at 90° increments 270° Wheelfeed One division of vernier 0.005 mm/Ø Automatic feed, max 0.9 mm/Ø Motors Grinding spindle motor 2,900 min-1 / 4.0 hp Workhead spindle motor 3,000 min-1 / 2.0 hp Coolant pump motor 2,850 min-1 / 0.12 hp Internal Grinding Device Bore 70 mm Int. grinding spindle speed Ø70 mm 14,000 min-1 Int. grinding spindle speed Ø50 mm 21,000 min-1 Unless otherwise stated, the technical data is provided without guarantee of accuracy or completeness.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 32461/2384, Origin of manufacture: Switzerland Voltage: 380 / 50 / 3 (V/Hz/Ph) Dceded Amifspfx Am Dsi Net weight: 2200 kg TECHNICAL DATA Nominal distance between centres: 600 mm Maximum distance between centres (workpiece spindle stock and tailstock retracted): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plate (workpiece spindle and tailstock): 175 → 250 mm Maximum possible swing diameter (125 mm centre height): 250 mm Maximum possible swing diameter with intermediate plates: 350 → 500 mm Table swivelling range, each side: 10° Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically and steplessly adjustable: approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding, diameter x width x bore: 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding, diameter x width x bore: 250 x 13 x 76 mm Grinding spindle speeds (rpm): 1500 / 1700 / 2200 / 3600 Swiveling range of grinding spindle headstock: 270°, lockable every 90° Vertical travel of grinding spindle headstock (centre height): 125–350 mm Cross travel of grinding slide: 285 mm Hydraulic rapid advance and return of grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev Feed amount for plunge grinding: 0–0.9 mm/rev Micro stop for feed per division: 0.001 mm/rev Swiveling range of workpiece spindle stock: 360° Workpiece spindle speeds, steplessly adjustable normal/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5/3 Grinding spindle motor, approx.: 4 HP Errors and omissions excepted. Technical data provided without obligation. Inventory No. 2170089, Machine Accessories List: 1 workpiece spindle headstock MK5 1 sine bar without dial comparator 1 grinding spindle headstock with 4 drive pulleys 1 tailstock MK3 1 collet draw system with collet and reducing sleeve B32 1 internal grinding attachment with Fischer quill UJ50x250 – drive pulley Ø 48 for 14,000 rpm 1 rotatable disc dressing device with 50 mm base 1 table rotation stop without comparator 1 coolant system by decantation 1 ejector 1 balancing bar

Būklė: geras (naudotas), Distance between centers: 1000 mm Center height: 230 mm Main motor power: 9.2 kW Grinding wheel dimensions (od x id x width): 500x80x203.2 mm Max grinding diameter: 460 mm Tailstock taper: MORSE 4 Workhead taper: MORSE 5 Dcjdotrgnzspfx Am Dji Max. Z-axis travel: 1115 mm Max. X-axis travel: 260 mm Approx. dimensions (length x width): 440x370 cm Approx. weight: 4700 kg

Būklė: geras (naudotas), Distance between centers: 760 mm Max. Z-axis travel: 650 mm Maximum grinding length: 430 mm Maximum grinding diameter: 250 mm Center height: 125 mm Maximum grinding wheel diameter: 500 mm Max. X-axis travel: 320 mm CNC brand: FANUC Dsdpfx Aev Tmtlem Deci CNC model: 18TB Main motor power: 7.5 kW Z and X-axis resolution: 0.1 µm Workhead taper: MORSE 5 Workhead through bore diameter: 38 mm Tailstock taper: MORSE 4 Workhead spindle speed: from 8 to 800 rpm Dimensions (L x W): 2500 x 2000 mm Weight: 4700 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, centro aukštis: 175 mm, ruošinio svoris (maks.): 180 kg, šlifavimo ilgis: 1 000 mm, šlifavimo disko skersmuo: 400 mm, bendras ilgis: 1 150 mm, šlifavimo skersmuo: 349 mm, The machine is operational and in use at our facility. It is equipped with 2 external diameter and 2 internal grinding spindles; features C-axis. Dcjdpfxjv Uxris Am Dji

Būklė: visiškai atnaujintas (naudotas), Kellenberger vidinių ir išorinių detalių universalioji apvali šlifavimo staklė Kellenberger 1500 U - 175 (įskaitant vidinį šlifavimo įrenginį) Dcodowqlykopfx Am Doi Atstumas tarp centrų: 1500 mm - Centro aukštis: 175 mm Siemens servovariklis. Dažnio keitikliai viduje ir išorėje, WSS Parduodama su įvairia papildoma įranga. Prieinama iš karto! 1000U variantas: restauravimo procese

Būklė: naudotas, Atstumas tarp centrų: 1000 mm Centrų aukštis: 250 mm B ašis: Tikslumas 0.1° CNC gamintojas: Kelco CNC modelis: 90 Kairiojo šlifavimo rato matmenys (išor. x vid. x plotis): Ø400 x Ø127 x 63 mm Dešiniojo šlifavimo rato matmenys (išor. x vid. x plotis): Ø400 x Ø127 x 50 mm Ruošinio laikiklio galvos pasukimas: -30° +120° Ruošinio laikiklio galvos kūgis: MK 5 Didžiausias ruošinio svoris tarp centrų: 150 kg Atatrankos kūgis: MK 4 Dedpoxmg Ekofx Am Dsci Atatrankos trumpinimo eiga: 50 mm Didžiausias perimetrinis greitis: 32 m/s Vidinio šlifavimo aukšto dažnio velenas: Ø120 mm Vidinio šlifavimo veleno gamintojas: WARNER, modelis K 3.000 Pagrindinio variklio galia: 7,5 kW Bendra galia: 26,5 kW Maks. Z ašies eiga: 1.150 mm Maks. Z ašies greitis: 15 m/min Darbo stalo pasukimas: 0°–9° Maks. X ašies eiga: 320 mm Maks. X ašies greitis: 7,5 m/min Ilgis: 3600 mm Plotis: 2000 mm Svoris (apytiksl.): 5.000 kg

Būklė: geras (naudotas), Atstumas tarp centrų: 1000 mm Centrų aukštis: 175 mm CNC prekės ženklas: FANUC CNC modelis: Oi-TD Dcedotrgn Topfx Am Doi