Kellenberger pirkti naudotą (82)

Sąlyga: naudotas, Gamybos metai: 1978, Grinding diameter: 500 mm Grinding length: 500 mm Centre height: 250 mm The URF model is designed for both single-piece and series production of highly precise workpieces clamped in a chuck, on a faceplate, or on a magnetic chuck, with a maximum load capacity of 330 Nm including clamping devices. This machine type is characterized by its compact and robust construction, ease of operation, and high versatility, as well as short changeover times for external, face, and internal grinding processes. Fields of application: - Toolmaking - Mould making - Gauge manufacturing External grinding wheel diameter: 400 mm Face grinding wheel diameter: 225 mm Internal grinding device for spindle diameters of 70 mm; 80 mm available upon request. Bsdpfovx Dvnox Admsdk The machine has been completely overhauled: - New control cabinet - Modern hydraulic unit - Reinforced workpiece spindle head (see photo) - 2-axis digital readout by Fagor - Sine bar for precise adjustment of the swivel angle Photos show current overhaul status. Delivery time: approx. 3 weeks from order.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workpiece headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, overhauled. Hydraulics Disassembled, motor check, replacement of hoses, defective and worn parts. Hydraulic block inspected. X Axis Disassembly, replacement of worn parts such as O-rings, seals, rings, etc., overhaul of hydraulic piston, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical cabinet Complete inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer’s protocol. Inspection and cleaning of various accessories. Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff number 8460.2920 TECHNICAL SPECIFICATIONS Nominal centre distance 600 mm Max. centre distance (extended headstock) 750 mm Centre height, standard 125 mm Centre height with interchangeable shoes for headstocks 175 to 250 mm Max. workpiece diameter (125 mm centre height) 250 mm Max. workpiece diameter with interchangeable shoes 350 to 500 mm Table swivelling in either direction 10° Bdodsw U Ry Njpfx Admok Max. length for surface grinding (max. width = 200 mm) 900 mm Table speed with continuously variable hydraulic control up to approx. 6 m/min Table reversal dwell time 0-5 sec. Wheel for external grinding, diameter-width-bore 400x50x127 mm Wheel for surface grinding 250x13x76 mm Grinding spindle speeds 1500/1700/2200/3600 rpm Grinding headstock swivel 270° With index every 90° Vertical movement of grinding headstock, centre height 125-350 mm Cross travel of grinding headstock 285 mm Hydraulic rapid advance/retract stroke 40 mm Intermittent feed of the wheel by table reversal 0.001-0.03 mm/dia Continuous plunge grinding feed 0-0.9 mm/dia Micrometric feed stop, graduated 0.001 mm/dia Workpiece headstock swivel 360° Continuously variable workpiece spindle speed, standard/special 20-400 / 10-400 rpm Workpiece headstock/tailstock internal taper 5/3 Morse Grinding headstock motor, approx. 4 HP All technical details are given without obligation and subject to errors or omissions.

Sąlyga: paruoštas naudoti (naudotas), An older precision cylindrical grinding machine from Kellenberger, including accessories, is available. Centre distance: 200 mm, centre height: 125 mm, maximum workpiece weight: 3 kg, maximum workpiece diameter: 245 mm, maximum workpiece length: 130 mm. An on-site inspection is possible. Bdjdew Edpgepfx Admsk

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, For sale is a universal cylindrical grinding machine by Strausser-Kellenberger. Technical data: Manufacturer: Strausak AG Maschinenfabrik (Switzerland) Model: 57U Voltage: 380V / 50 Hz Machinery Purchase / Sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? Bodpov E Ivfefx Admjdk For further information or contact options, please visit our website.

Gamybos metai: 2008, Sąlyga: naudotas, Packing machine for 10-bottle and 6-bottle cartons for 330 ml non-returnable bottles, including date marking via Videojet printer, year of manufacture 2016. Machine (additional): Full carton packing machine Voltage: 400 V Compressed air: 6 bar Length: 5.4 m Width: 1.15 m Bdodpfx Adovcqn Ejmok Height: 1.95 m Base construction: on legs Equipment: Inkjet date coder year of manufacture 2016, hot melt adhesive unit Weight: 700 kg

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, centro aukštis: 175 mm, šlifavimo ilgis: 1 000 mm, sukimosi greitis (min.): 20 aps./min, sukimosi greitis (maks.): 400 aps./min, valdiklių gamintojas: Fanuc, valdiklio modelis: 0i-TF Plus, Completely Refurbished Kellenberger R175x1000 CNC Cylindrical Grinder – Unused Since Overhaul! The machine has been fully retrofitted in cooperation with Fanuc and includes: - New control cabinet and wiring diagram - New Fanuc 0i-TF Plus CNC control - New Fanuc servo motors and servo drives - New Elaso balance system with GAP - Grinding wheel loader - Coolant tank with paper filtration - Geometry verified according to Kellenberger protocol TECHNICAL DETAILS: Control: Fanuc 0i-TF Plus Centre height: 175 mm Distance between centres: 1000 mm Workhead spindle speed: 20 - 400 rpm C-Axis: available Programming: Programs can be created using G-codes or via the user-friendly interface Bdsdpfx Adovmqllemek Table swivel range: 8° (for long workpieces) Headstock swiveling: 90° (for short workpieces that do not require a tailstock) Table speed: max. 10.0 m/min (stepless) External grinding: possible Internal grinding: not possible Shoulder grinding: up to 6 different diameters on the same workpiece Taper grinding: The machine features a swiveling table up to 8 degrees for long parts, and the headstock can be swiveled up to 90 degrees for short parts that do not require a tailstock.

Sąlyga: naudotas, Grinding diameter: 250 mm Grinding length: 600 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: +/- 360° Grinding headstock swivels: +/- 0° Plunge feed per stroke: 0–9.99 mm/Ø Continuous feed: 0–9.99 mm/Ø Table swivels: +/- 10° Table longitudinal movement: 700 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – between centres: 130 kg including clamping Cross-slide travel: 270 mm Tailstock quill taper: MT 3 Quill travel: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As the world’s leading company in Kellenberger overhauling/retrofit, we not only deliver machines in as-new quality and with warranty, but also offer comprehensive service for your machines. Overhauled to Kellenberger guidelines, including brand new, modern and future-proof control system. Photo shows a previously delivered machine. – Touch-panel operation is extremely easy. – The control panel’s symbols are almost identical to the original system, eliminating the need for extensive retraining. – Diagnostic function with PLC messages and digital I/O display. – Dressing function expandable or modifiable to customer requirements. – Orientated spindle stop for the workpiece spindle available upon request. – New maximum infeed amount of 40 mm, further increases upon request. – Digital readout in 2 axes. X-axis resolution: 0.5 μm. Options: – Rotary encoder with digital display on workpiece headstock – Rotary encoder with digital display on grinding headstock (no height adjustment possible with spindle) – New stable internal grinding device for diameters 80 mm or 100 mm, with height adjustment – Increase centre height up to max. 225 mm – Variable speed control for grinding spindle Included: – New DGS paper band filter – Operation tools – Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic table stroke and rapid traverse. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup of workpieces. Optional features: – Semi-automatic dressing cycles for external and internal grinding – Automatic dressing compensation Bjdsd Ih Ehopfx Admsdk – Measurement control system The machine tool currently does not comply with the basic safety and protection requirements as stipulated in BetrSichV 2015. A hazard assessment in accordance with BetrSichV must be carried out to determine the required minimum level of protection.

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 32461/2384, Origin of manufacture: Switzerland Voltage: 380 / 50 / 3 (V/Hz/Ph) Net weight: 2200 kg TECHNICAL DATA Nominal distance between centres: 600 mm Maximum distance between centres (workpiece spindle stock and tailstock retracted): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plate (workpiece spindle and tailstock): 175 → 250 mm Maximum possible swing diameter (125 mm centre height): 250 mm Maximum possible swing diameter with intermediate plates: 350 → 500 mm Bdodpod Amifjfx Admjk Table swivelling range, each side: 10° Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically and steplessly adjustable: approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding, diameter x width x bore: 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding, diameter x width x bore: 250 x 13 x 76 mm Grinding spindle speeds (rpm): 1500 / 1700 / 2200 / 3600 Swiveling range of grinding spindle headstock: 270°, lockable every 90° Vertical travel of grinding spindle headstock (centre height): 125–350 mm Cross travel of grinding slide: 285 mm Hydraulic rapid advance and return of grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev Feed amount for plunge grinding: 0–0.9 mm/rev Micro stop for feed per division: 0.001 mm/rev Swiveling range of workpiece spindle stock: 360° Workpiece spindle speeds, steplessly adjustable normal/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5/3 Grinding spindle motor, approx.: 4 HP Errors and omissions excepted. Technical data provided without obligation. Inventory No. 2170089, Machine Accessories List: 1 workpiece spindle headstock MK5 1 sine bar without dial comparator 1 grinding spindle headstock with 4 drive pulleys 1 tailstock MK3 1 collet draw system with collet and reducing sleeve B32 1 internal grinding attachment with Fischer quill UJ50x250 – drive pulley Ø 48 for 14,000 rpm 1 rotatable disc dressing device with 50 mm base 1 table rotation stop without comparator 1 coolant system by decantation 1 ejector 1 balancing bar

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 5 000 h, Funkcionalumas: visiškai funkcionalus, centro aukštis alkūniniame velene: 200 mm, centro aukštis: 200 mm, ruošinio svoris (maks.): 100 kg, šlifavimo ilgis: 1 000 mm, ruošinio svoris tarp centrų: 100 g, ruošinio skersmuo tarp centrų: 400 mm, I am offering this machine here on behalf of a customer; it is in near-new condition. Currently still under power. It is equipped with the following options: - Glass linear scales in X and Z - Electric door drive - Integrated disc changing aid Fanuc 0i TF Blue Solution HMI Back Solution Basic Black CAM Profile Security Interface Remote diagnostics via mobile network (4G) Grinding head with automatic 1-degree indexing Grinding head UR 1 - 2 - 3 (prepared for HF internal grinding spindle) Bsdpfx Adew Ed D Romedk T1 500; T2 400 mm 3-jaw steady rest Active longitudinal positioning on the head Semi-automatic balancing GAP control A brochure for the K 10 can be provided if required.

Sąlyga: naudotas, Atstumas tarp centrų: 1000 mm Centrų aukštis: 250 mm Bdjdpfx Ajxmg Ekedmjk B ašis: Tikslumas 0.1° CNC gamintojas: Kelco CNC modelis: 90 Kairiojo šlifavimo rato matmenys (išor. x vid. x plotis): Ø400 x Ø127 x 63 mm Dešiniojo šlifavimo rato matmenys (išor. x vid. x plotis): Ø400 x Ø127 x 50 mm Ruošinio laikiklio galvos pasukimas: -30° +120° Ruošinio laikiklio galvos kūgis: MK 5 Didžiausias ruošinio svoris tarp centrų: 150 kg Atatrankos kūgis: MK 4 Atatrankos trumpinimo eiga: 50 mm Didžiausias perimetrinis greitis: 32 m/s Vidinio šlifavimo aukšto dažnio velenas: Ø120 mm Vidinio šlifavimo veleno gamintojas: WARNER, modelis K 3.000 Pagrindinio variklio galia: 7,5 kW Bendra galia: 26,5 kW Maks. Z ašies eiga: 1.150 mm Maks. Z ašies greitis: 15 m/min Darbo stalo pasukimas: 0°–9° Maks. X ašies eiga: 320 mm Maks. X ašies greitis: 7,5 m/min Ilgis: 3600 mm Plotis: 2000 mm Svoris (apytiksl.): 5.000 kg

Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 613437, Overhauled Kellenberger grinding machine type 1000U/175 Centre height: 175 mm Bsdpfx Aowxl Rxedmjdk Centre distance: 1000 mm Comes with many accessories, see photos.

Gamybos metai: 1979, Sąlyga: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, TECHNICAL DETAILS Centre height: 125 mm, plus heights of 50 mm Distance between centres: 1,000 mm Grinding wheel: • Diameter: 400 mm • Width: 50 mm • Bore: 127.0 mm Swivel angle: 270° Workpiece spindle head speed: 20 - 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel angle: 8° Table feed rate: stepless up to 6.0 m/min Internal grinding spindle with 60,000 rpm External grinding wheel motor: 4.0 kW Workpiece spindle motor: 1.5 kW Machine weight: 3,100 kg Overall machine dimensions: 2,860 × 1,680 × 1,670 mm (L × W × H) Bdedpfxok H Hp No Admsk EQUIPMENT & SCOPE OF DELIVERY • Machine fully retrofitted • New control cabinet & new wiring diagram • New motor & frequency inverter for workhead • 2-axis DRO • Coolant tank with paper filtration • Geometry manufactured according to Kellenberger protocol • Internal grinding spindle • Extensive accessories Please refer to the attached inspection report for further machine details.

Sąlyga: naudotas, Gamybos metai: 2006, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Machine weight approx. 3.5 t Machine fully overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a freshly completed machine with some different options. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/planar grinding - B-axis automatic 1° Hirth toothing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount 400mm diameter - Right grinding wheel mount 300mm diameter - Internal grinding attachment with belt drive Bodpfxet Ii Nbs Admedk - Tailstock with micrometric adjustment - Fine adjustment of upper table - Paper band filter SBP4 240l

Sąlyga: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 16 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 650341, Year 1999 with Fanuc 18 TB – 3 axes XZB Marposs E30/E20 Country of manufacture: CH Voltage: 400V/50Hz/3ph Dimensions: 410 x 220 x 190 cm Net machine weight: 5000 kg TECHNICAL SPECIFICATIONS CNC: Fanuc 18TB Intermediate section Fixed intermediate section: Grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1'': R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° (+100° Spindle speed (continuous): 6 – 600 min⁻¹ Internal taper mount: MT5 Reduction sleeve: MT5/MT4 Bdjdpfew T Tb Hsx Admok Short taper external mount: DIN 55026 / Size 5 Admissible load: 160 Nm Guaranteed roundness for chucking operations Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper mount: MT4 Quill stroke: 50 mm / 2° Option: micrometric movement with correction (Ø +/- 150 µm) Grinding wheel data Diameter 300 mm: 27 m/s Diameter 400 mm: 35 m/s Diameter 500 mm: 45 m/s UR grinding head Power: 9.2 kW / 12.5 HP Left wheel mount, max.: Ø 500 x 80 mm Additional right wheel, max.: Ø 400 x 63 mm Internal grinding device: HJN 828 spindle Lower table (Z axis) Distance between centers: 1000 mm Max travel: 1150 mm Max speed: 15 m/min Max resolution: 0.1 µm Upper table Distance between centers: 1000 mm, swiveling 0 to 9° Grinding slide (X axis) Max travel: 320 mm Max speed: 7.5 m/min Max resolution: 0.1 µm Pneumatics Minimum connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max pressure connection: 3 bar Required space (version 1000): 3600 x 2000 mm All technical information is provided without obligation and subject to errors and omissions.

Gamybos metai: 2015, Sąlyga: labai geros būklės (naudotas), On behalf of a customer from Switzerland, I am offering this machine for sale. The machine is in excellent condition with only 5,200 operating hours. Previously used for prototyping, currently in operational condition. Features include: - UR grinding head - T1 500 x 80; T2 400 x 63 - 1 high-frequency internal spindle MFM 1224/42 - 1 high-frequency internal spindle MFM 1290 - Semi-automatic balancing system - KEL-TOUCH at the workpiece spindle head for internal and external grinding - KELSET grinding wheel measurement - KELPOS longitudinal positioning - Heidenhain CNC GrindPlus 640 - CNC B-axis, hydrostatic - CNC C-axis for polygon and thread grinding Bsdpsgtingjfx Admsdk - KELSOFT NCG for non-circular grinding - KELTHREAD for thread grinding - KELREMOTE for remote diagnostics - Prepared for measuring controls - Streuli 480 l paper band filter - Extraction system Short-term availability ex Switzerland.

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 600 mm, šlifavimo skersmuo: 250 mm, Mašina veikė iki visai neseniai. Šlifavimo skersmuo: 250 mm Šlifavimo ilgis: 600 mm Bodswca Hcepfx Admedk Pastabos: - Kaina NEAPIMA priedų! - Pasiėmimą organizuoja pirkėjas iš vietos. - Pasiėmimo laiką suderina pardavėjas. - Jokios garantijos - Išankstinis apmokėjimas (sąskaita) arba mokėjimas grynais atsiėmimo metu

Sąlyga: naudotas, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 125 mm - Table swivel: -/+ 8° - Universal grinding wheelhead - Left grinding wheel dimensions: 400 x 50 x 127 mm - Motor power: 3 kW - Spindle speed: 1500 / 1700 / 2200 rpm - Grinding wheelhead orientation: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workhead orientation: 180° - Spindle speed: 20 - 400 rpm - Internal spindle taper: Morse 5 - Motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Machine dimensions: 2860 x 1680 x 1670 mm - Weight: 2500 kg EQUIPMENT - Automatic cycle (roughing, finishing, and return) - Counter-centre - Sine bar for workhead - UR head: 2 external and 1 internal grinding wheel - Coolant tank with pump - 1 internal grinding spindle SFJ UJ70: 14,000 rpm - Fixed diamond dresser on tailstock - 4-jaw chuck - Magnetic chuck - Set of driving dogs - 2 steadies, two positions Bdedouhbx Tjpfx Admok - Distance piece for height 175 mm - Various wheel flanges - Various grinding wheels

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, centro aukštis: 175 mm, ruošinio svoris (maks.): 180 kg, šlifavimo ilgis: 1 000 mm, šlifavimo disko skersmuo: 400 mm, bendras ilgis: 1 150 mm, šlifavimo skersmuo: 349 mm, The machine is operational and in use at our facility. It is equipped with 2 external diameter and 2 internal grinding spindles; features C-axis. Bodpfx Aov Uxriedmedk

Sąlyga: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Plunge feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Bdsdpfx Adet Ii Nuomek Table swiveling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a worldwide leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver these machines in like-new condition with warranty, but also provide service for your machines. Machine geometry overhauled and newly painted, with original electrics. Photo shows a recently delivered 600U. - Digital readout in 2 axes, x-axis resolution 0.5 μm Options: - Rotary encoder with digital readout in the workpiece spindle headstock - Rotary encoder with digital readout in the grinding spindle headstock (no height adjustment possible with spindle) - New stable internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height can be increased up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At present, the machine tool does not comply with the essential safety and protection requirements as stipulated in the German Industrial Safety Ordinance (BetrSichV 2015). Compliance with the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Sąlyga: geras (naudotas), Atstumas tarp centrų: 1000 mm Bdodpjtrgn Tjfx Admek Centrų aukštis: 175 mm CNC prekės ženklas: FANUC CNC modelis: Oi-TD

Sąlyga: naudotas, TECHNICAL DATA - Distance between centers: 600 mm - Center height: 175 mm - Table swivel angle: 11° UNIVERSAL GRINDING WHEEL HOLDER HEADSTOCK - Left grinding wheel dimensions: 400 x 50 x 127 mm - Right grinding wheel dimensions: 225 x 20 x 76.2 mm - Motor power: 3 kW - Spindle speeds: 1500 / 1700 / 2200 rpm - Grinding wheel headstock swivel angle: 270° WORKPIECE HOLDER HEADSTOCK - Workpiece holder headstock swivel angle: 360° - Spindle speeds: 20 - 400 rpm - Internal taper: Morse 5 - Motor power: 0.9 kW TAILSTOCK - Internal taper: MT4 - Quill stroke: 30 mm DIMENSIONS - Required space: 2580 x 1680 mm - Height: 1670 mm - Weight: 2200 kg Bdjdeuhbywepfx Admjk ACCESSORIES - Coolant tank with pump - FISCHER internal grinding spindle

Sąlyga: naudotas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Left wheel 600 mm Grinding spindle head fixed, non-rotatable. Bdsdpfst Ii Rfex Admok Equipped with new FAGOR control system featuring BEMA cylindrical grinding interface. With new service-friendly enclosure. Completely overhauled according to Kellenberger measurement protocol.

Sąlyga: geras (naudotas), cilindrinės šlifavimo staklės Bedpfx Adetrgukomsdk

Sąlyga: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. Bjdouxfupepfx Admsdk A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Sąlyga: naudotas, Gamybos metai: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. Still under power at the previous owner’s site and can be inspected for a short time. In 2022, the machine underwent a partial overhaul and servicing at our facility, including restoration of the geometry to manufacturer's specifications. Equipment: Bjdpfx Adov Tqqnomedk - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment - Internal grinding attachment - Fischer UJ70 internal grinding spindle - Paper band filter - Automatic cycle: roughing - finishing - spark-out - retraction