Karl Schermer pirkti naudotą (403)

Gamybos metai: 1962, būklė: naudotas, mašinos/transporto priemonės numeris: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine No.: 1790 Hedpfjdl Uzksx Af Uel General / Technical Data: Hydraulic horizontal internal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by oil and chip tray) Cutting speed: hydraulically adjustable, stepless from 1 m/min to 7 m/min Return speed: hydraulically adjustable, stepless from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without working area) Power supply: 380 V / 50 Hz / 15 A Hydraulic motor: 4 kW Accessories / Special Features: • The machine is equipped with a universal pull head for flat shanks • Refrigerant / lubrication system • Without tool feeder • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for manufacturing keyway slots. On request, broaching needles and mandrels can also be supplied. The machine is connected and ready for demonstration under power in our warehouse.

Gamybos metai: 1958, būklė: naudotas, mašinos/transporto priemonės numeris: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2,500 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 1 broaching station, fully operational. Tensile force: 6,000 kg Broaching length: 1,000 mm Draw head diameter: Ø 85 mm Passage width between cylinders: max. 280 mm Cutting speed: hydraulically variable, stepless from 1 m/min up to max. 7 m/min Return speed: hydraulically variable, stepless from 7 m/min up to max. 25 m/min Machine dimensions (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / Connected load: 380 Volt, 50 Hz / 4 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 1 broaching station. The tool clamping system is designed for mechanical spring locking (DIN 1415). An integrated coolant system is included. The machine features a double draw head for two flat broaching tools with workpiece support plate. Hjdsda Ugiopfx Af Usl Remarks: The machine is in age-appropriate good condition and ready for immediate use. It is designed for manual operation in medium-batch production. Installation ideally requires a machine pit or, alternatively, a platform. Draw heads are available on request. The machine does not have a tool loader. The machine can be inspected under power at our warehouse.

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1733, Vertical internal broaching machine with index plate by Karl Klink Type: RSI10DT Hedpfogyd S Sex Af Usl Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7.5 kW The machine has been fully overhauled and is therefore in very good condition.

Gamybos metai: 1964, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Mounting diameter for pull heads: 3 x Ø ___ mm Cutting speed: hydraulically infinitely variable from 1 m/min up to a maximum of 7 m/min Return speed: hydraulically infinitely variable from 7 up to a maximum of 25 m/min Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: The machine is equipped with a workpiece table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring mechanical locking in the pull bridge and hydraulic-mechanical locking in the feed. The machine underwent an electrical (Siemens S7 PLC) and mechanical retrofit in 2004. The unit is fitted with an integrated coolant system. Remarks: Hodot Dv I Aepfx Af Usl The machine is designed for use in series production; for optimal operation, a foundation pit is recommended, or alternatively, a platform may be used. Pull heads and broach lifters are available upon request. The machine can be inspected at our warehouse.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1966, bendras svoris: 7 000 kg, įėjimo įtampa: 380 V, brošavimo ilgis: 1 500 mm, brochavimo pozicijų skaičius: 3, ruošinio skersmuo (maks.): 575 mm, bendras aukštis: 5 100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700 kg Machine no.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations drawing force: 20,000 kg broaching stroke: 1,500 mm Hedpfx Afowql Rvo Uol broaching stations: 3 units spacing between broaching stations: 2x145 mm holder diameter for draw heads: 3 x Ø 85 mm passage width between columns: max. 580 mm cutting speed: hydraulically stepless, adjustable from 1 m/min up to max. 7 m/min return speed: hydraulically stepless, adjustable from 7 up to max. 25 m/min machine footprint (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. 5,100 mm height with tool feeder raised) power supply / connection load: 380 Volt 50 Hz / 14 kW Accessories / Special Equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the draw bridge and in the feeder. The machine is fitted with an integrated coolant system. Notes: The machine is designed for use in series production. For optimal operation, a foundation (pit) is ideally required, alternatively a platform. Draw heads and knockout units are available on request. The machine can be inspected under power at our warehouse. General Information: We constantly have a large selection of approx. 80 used broaching machines with drawing forces from 3,000 kg to 63,000 kg in both horizontal and vertical design in stock. A large part of our in-stock broaching machines is available for demonstration. On request we can offer you used equipment such as draw heads, knockouts, broaching tools and other specific accessories. As a contract broaching shop, we can also assist you with technical questions backed by 50 years of experience in broaching technology.

Gamybos metai: 1961, būklė: naudotas, General / Technical Data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Model: RSA 10 T/Zw. Year of manufacture: 1961 Hedolwu Hrspfx Af Uol Weight: approx. 6,500 kg Tensile force: 10 t Broaching speeds: 1 - 11 m/min Return speeds: 7 - 25 m/min Maximum stroke: per machine unit 1,250 mm Clamping surface: 500 x 500 mm Passage width: 380 mm Power supply: 380 Volt / 50 Hz Note: The machine is connected to power at our warehouse and can be inspected.

Gamybos metai: 1960, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 1732, Vertical internal broaching machine with index plate by Karl Klink Model: RSI6DT Hsdpfxjgyd Sve Af Uol Machine No.: 1732 Year of manufacture: 1960 Weight: 3.2 t Broaching force: 6,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been fully overhauled and is therefore in very good condition.

Gamybos metai: 1964, būklė: visiškai atnaujintas (naudotas), mašinos/transporto priemonės numeris: 2041, Vertical internal broaching machine with index plate by Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Hsdegyd S Djpfx Af Ujl Broaching force: 8,000 kg With index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition.

Gamybos metai: 1962, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Tensile force: 10,000 kg Broaching length: 1,200 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Holder diameter for broach heads: 3 x Ø ___mm Passage width between cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Hsdpfx Afet Dwb Do Usl Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in both the draw bridge and the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production. For optimal utilization, it ideally requires a foundation (pit) or alternatively a platform. Broach heads and mandrel ejectors are available upon request. The machine can be inspected at our warehouse.

Gamybos metai: 1965, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2549, General / Technical Data: Hsdetuuvzjpfx Af Usl Used horizontal hydraulic internal broaching machine in age-appropriate good condition with heavy-duty manual tool feeder. Broach stroke: 2,000 mm Pulling force: 25,000 kg (250 kN) Mounting in the pull bridge: Ø 105 mm cylindrical Through-hole in clamping table: Ø 125 mm Clamping surface / workpiece area: 440 mm x 440 mm Maximum workpiece diameter: approx. 800 mm (limited by the tool feeder’s tool tray) Cutting speed: hydraulically, steplessly adjustable from 1.5 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450 L / coolant approx. 100 L Machine footprint (W x D x H): approx. 8,400 mm x 1,350 mm x 1,800 mm (excluding work area) Power supply: 380 Volt, 50 Hz Connected load: 19 kW Features: • Mechanical-hydraulic control for broach and return stroke • Integrated coolant and cutting fluid system • Manual tool feed • Broaching carriage with pull head mounting guided flat on both sides • Adjustable pulling force limiter • Pulling force indicator Accessories: • 1 universal pull head for flat shanks up to approx. 40 mm width • Indexing device (see photos) • Various special adapters and clamping devices • Machine documentation Remarks: The machine is suitable for producing keyways using flat broaching tools as well as profile broaching. Thanks to the machine bed and the robust broaching tool feeder, the machine is ideally suited for heavy-duty profile broaching tools. The machine is used and in good condition for its age. The machine is available for inspection at our warehouse. The machine has newly arrived in our stock and has not yet been overhauled, neither technically nor cosmetically. Pull heads for profile broaching are available on request, depending on DIN standard, dimension, and subject to stock.

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of Manufacture: 1990 Machine No.: 3048 & 3047 General / Technical Data: Chain Broaching Machine for Continuous External Broaching Pulling Force: 25,000 kg Cutting Speed: 7.2 / 8.1 / 9.6 m/min Maximum Tool Length: 3520 mm Passage/Working Width: 520 mm Clamping Surface of Tool Carrier: 3520 x 460 mm Dimensions: 12,300 x 6,400 x 4,650 mm Power Supply: 380V 50Hz / 110 kW Accessories / Special Features: - 6 tool carriers for tool changing - Machine documentation Remarks / General Information: The machines are in good condition and currently stored dismantled at our warehouse. The total transport volume of the facility requires several trucks (approx. 70 tons per machine). The machines were previously used for the production of connecting rods for passenger car diesel engines. Chain broaching machines are designed for use in mass production environments. Hjdpfx Ajinim Tof Ujl The continuous (retraction-free) operation of chain broaching enables maximum achievable productivity for external broaching processes. The chain broaching method is the only broaching process without a return stroke of the tools or workpieces. During chain broaching, the workpiece is continuously guided past the tool, thus performing the feed motion. This unique broaching process is only used for very large batch quantities in series production.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, bendras svoris: 2 900 kg, galia: 8 kW (10,88 AG), įėjimo įtampa: 380 V, brochavimo pozicijų skaičius: 1, bendras plotis: 6 100 mm, bendras aukštis: 1 900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Hsdpfxextcz Is Af Uel Diameter of the pull head holder on the drawbridge: 85 mm Broaching tool clamping: universal pull head for flat shanks up to 25 mm wide Pass-through hole in clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine housing of the tool feeder) Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt, 50 Hz / 8.0 kW Accessories / Special features: • The machine is equipped with a manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine has a simple oil drip tray mounted on the machine bed without a tool feeder! Remarks: The machine is ideal for manufacturing keyways and profiles. On request, broaching tools, arbors, and pull heads can be supplied.

Gamybos metai: 1978, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 2751, General / Technical Data: Hsdpfx Ajiw Dlksf Ujl Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Tensile force: 6.3 t Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special features: - Coolant / lubricant unit - Without automatic tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideal for machining keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Būklė: naudotas, Gamybos metai: 1990, maks.: traukos jėga 25 000 kg maks.: įrankio ilgis 3520 mm maks.: pjovimo greitis 9,6 m/min praėjimo plotis: 520 mm Hsdpfxscm Eiwj Af Uol Mašina buvo naudojama švaistikliams ir švaistiklio dangteliams apdirbti. Mašina skirta masinei gamybai (našumas: 400 detalių/val.)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Komplette Fabrik zum Verkauf, noch in Produktion, mit einigen Stoffmustern der aktuell hergestellten Produkte. Mit vollständigem Kundenstamm und sämtlichen technischen Dokumentationen. KARL MAYER RASCHEL RJSC-4F-NE 230 584 18 MIT GARNGESTELL 844xx 2 Stück, Baujahr 1997 KARL MAYER RASCHEL RJSC-4F-NE 230 584 18 MIT GARNGESTELL 831xx 2 Stück, Baujahr 1996 KARL MAYER RASCHEL 5/2 F-NE, ZWEI JACQUARDSTANGEN, 130 330 14/14 MIT ZWEI GARNGESTELLEN 626xx 2 Stück, Baujahr 1984 KARL MAYER RASCHEL 5/2 F-NE, ZWEI JACQUARDSTANGEN, 130 330 7/14/7 MIT ZWEI GARNGESTELLEN 626xx 1 Stück, Baujahr 1984 KARL MAYER RASCHEL RG4N-1K 130 330 20 555xx 1 Stück KARL MAYER RASCHEL RMJG 5-F 130 330 7/14 MIT GARNGESTELL 543xx 1 Stück, Baujahr 1979 KARL MAYER RASCHEL RJG 5F-NE 130 330 7/14 MIT GARNGESTELL 582xx 2 Stück, Baujahr 1988 KARL MAYER RASCHEL RJMSG 4F-NE 130 330 14 MIT GARNGESTELL 762xx 5 Stück, Baujahr 1991 KARL MAYER RASCHEL RJMSG 5F-NE 130 330 14 MIT GARNGESTELL 744xx 2 Stück, Baujahr 1990 KARL MAYER RASCHEL RJMSG 5/2 F-NE ZWEI JACQUARDSTANGEN 130 330 14/14 MIT ZWEI GARNGESTELLEN 744xx 5 Stück, Baujahr 1990 KARL MAYER RASCHEL HDRJ 5/2 PLM ZWEI JACQUARDSTANGEN 130 330 16/16 MIT ZWEI GARNGESTELLEN 677xx 3 Stück KARL MAYER RASCHEL RJMSG 4F-NE 130 330 14 MIT GARNGESTELL 763xx 1 Stück, Baujahr 1991 KARL MAYER RASCHEL RJG 5/2 F-NE ZWEI JACQUARDSTANGEN 130 330 14/14 MIT ZWEI GARNGESTELLEN 654xx 4 Stück, Baujahr 1984 KARL MAYER RASCHEL RJG 5/2 F-NE ZWEI JACQUARDSTANGEN 130 330 14/14 MIT ZWEI GARNGESTELLEN 683xx 2 Stück, Baujahr 1986 KARL MAYER KS3 130 330 28 553xx 1 Stück Hjdpfx Afjxlt Rqo Uol KARL MAYER KS2 130 330 28 531xx 1 Stück KARL MAYER Schärmaschine G8 14 221x 1 Stück KARL MAYER Schärmaschine DS21 14X21 287x 1 Stück SCHWEITER Spulaufwickler 48 Positionen MC 82x 1 Stück M-TEC 4-Lagen-Stoff-Faltmaschine 330 740x 1 Stück, Baujahr 1997

Būklė: geras (naudotas), Karl Schnell FD3 proceso automatinis pjaustytuvas-maišytuvas-emulsikatorius Ši mašina unikaliu būdu sujungia maišytuvą, pjaustytuvą ir emulsikatorių uždaroje sistemoje. Akivaizdūs privalumai: – Kompaktiškas dizainas taupo vietą, – Visiškai išsiurbiama produkcija iš anksto pjaustančiame dubenyje vakuume su tuo pačiu metu maišymu ir išankstiniu smulkinimu, – Stabilus galutinis produktas su pastoviai atkuriama kokybe dėl pilnai automatinio procesų valdymo, Hsdsxnkciepfx Af Uol – Galimybė tiesioginiam ir netiesioginiam kaitinimui bei aušinimui, – Galimybė gaminti smulkias emulsijas ir pastines mases bei produktus su smulkiomis ar stambesnėmis dalelėmis. Trumpai tariant: taupomas laikas ir kaštai bei geresnė produkto kokybė. Gamintojas: Karl Schnell Modelis: FD 3 Skylės plokštė: 175 mm Partijos talpa: 310 l Emulsikatoriaus pavara: 18/37 kW Išankstinio smulkinimo variklis: 15/30 kW Maišytuvo variklis: 0,7 kW Maišytuvo apsisukimai: 13,3 min-1 Įvado sraigto pavara: 1,5 kW Matmenys (IxPxA): 2.250x1.800x2.100 mm Mašinos svoris: 3.000 kg.

Gamybos metai: 1965, būklė: naudotas, mašinos/transporto priemonės numeris: 2112, Color: green Towing capacity: 2.5 t Lift: 1000 mm Weight: 1.2 t 3 kW Hodpfx Afjbrclvj Uel Footprint: approx. 140 x 130 cm

Gamybos metai: 2000, būklė: naudotas, mašinos/transporto priemonės numeris: 3167, Jėga stumiant: 16 t Hedpfx Afoccxqte Uol Kėlimo aukštis: 1600 mm Svoris: 8,5 t

Būklė: geras (naudotas), Gamybos metai: 2002, Vakuuminis virimo ir tirpinimo įrenginys, horizontalus juostinis maišytuvas. Skirtas klampių produktų, tokių kaip lydytas sūris, gyvūnų pašaras, standartizavimo mišiniai ir pan., maišymui bei gaminimui vakuume. Dvigubos sienelės netiesioginiam šildymui arba aušinimui, galima ir tiesioginė garo įpurškimo sistema (6 garo įpurškimo antgaliai). Maksimalus slėgis apvalkale – 2 barai vandens arba garo, maksimalus – 3,5 baro. CIP sistema, išplaunama per 4 purškimo rutulius. Išvado liukas valdomas pneumatiškai. Su vakuumine sistema, vandens dozavimo sistema su srauto davikliu. Dangtis uždaromas, keliama pneumatiškai, integruotas žiedinės skysčio vakuuminis siurblys. Produkto pakrovimas: per atskirą elevatorių ir standartines 200 litrų vežimėlius (elevatorius: KS tipo 602, 1,1 kW – maks. 250 kg). Valdymo skydas su PLC (Siemens S7-300 valdikliai), dažnio keitikliai. Valdymo ekranas. Produkto kameros matmenys: 100 x 100 x 82 (ilgis x plotis x aukštis) cm. Dokumentacija prieinama. Hjdpfx Afow Uzzks Uel

Gamybos metai: 2009, būklė: naujas, Control panel for a Karl Mayer three-bar knitting machine. We also have the three servomotors available. Hjdpfx Aehva Twjf Ujl

Veikimo valandos: 20 h, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, bendras ilgis: 400 mm, bendras plotis: 1 100 mm, bendras aukštis: 800 mm, Ingridientų vežimėlis / maišų transportavimo vežimėlis „Kuli Karl“ Hedpfxsxvk Eyo Af Uol tinka 5 maišams po 25 kg Nerūdijančio plieno konstrukcija 4 pasukami ratukai Matmenys apytiksliai: 1100 x 400 x 800 mm (plotis x gylis x aukštis) Naudotas įrenginys/kaip naujas

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 50 km, pirmoji registracija: 01/2025, tuščias svoris: 10 500 kg, bendras svoris: 14 100 kg, ratų bazė: 3 850 mm, Gamybos metai: 2026, veikimo valandos: 1 h, keliamoji galia: 3 350 kg, pasukimo diapazonas: 400 °, Įranga: ABS, borto kompiuteris, diferencialo užraktas, kabelinė gervė, kranas, kruizo kontrolė, priekabos jungtis, sėdynės šildytuvas, visų varančiųjų ratų pavara,

Būklė: paruoštas naudoti (naudotas), WEG W22 variklis su Karl Klein DNG 6-25/TS-300°C ventiliatoriumi SN: 1612-302113, naudotas, geros būklės, pilnai veikiantis, komplektacija pagal nuotraukas. Hodpfx Afex Dwino Uol

Būklė: labai geros būklės (naudotas), KATALOGO NR. 7958 TECHNINĖ INFORMACIJA - Maksimalus pjovimo aukštis: 120 mm - Veleno plotis: 510 mm - Veleno skersmuo: 75 mm - Maksimali pjūklo skersmuo: 400 mm – Iš viršaus: - Atatrankos stabdikliai/atmušėjai – 2 eilės - Dantytas varantis velenas - Dantytas varantis išvestinis velenas – Iš apačios: - Atatrankos stabdikliai/atmušėjai - 2 dantyti varantieji velenai - Velenas su pjūklu - Dantytas varantis išvestinis velenas - 6 padavimo greičiai - Hidraulinės sistemos variklis (išplėtimas, padavimas, velenai) – 3 kW - Pagrindinis variklis – 22 kW - Sklandžiai reguliuojamas padavimo greitis Hsdpfxsyzr N Hj Af Uol - Valdymo pulto stovo matmenys: 700x600x1000 mm - Bendri matmenys: ilgis/plotis/aukštis – 2300x1450x1600 mm; svoris apie 2650 kg PRIVALUMAI – Pagaminta Turkijoje – Tvirta konstrukcija – Naudotas įrenginys, labai gera būklė Grynoji kaina: 37 900 PLN Grynoji kaina: 9 020 EUR pagal kursą 4,2 EUR (Kainos gali keistis dėl valiutų svyravimų)

Gamybos metai: 2016, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0162463201, For sale: Professional horizontal bandsaw USTUNKARLI-WRAVOR UHYB-120 with accessories, year of manufacture 2016. This is a robust industrial machine designed for processing logs, featuring a remotely controlled saw carriage, joystick control, and hydraulic material handling. The machine is equipped with log supports, driven feed and positioning rollers, log clamping hooks, and log turners. The package includes a control panel, hydraulic power units, and complete documentation with spare parts list and wiring diagrams. Key advantages include continuous saw feed speed of 0–42 m/min, fast height adjustment at 80 mm/s, maximum saw blade lift of 1200 mm, and industrial power supply 3 × 380–400 V / 50 Hz. The machine is suitable for medium-sized and larger woodworking operations seeking a high-performance hydraulic sawmill with complete log handling capabilities. Technical Specifications (from manual): Manufacturer: USTUNKARLI/WRAVOR Model: UHYB-120 Year of manufacture: 2016 Machine dimensions: 12,350 × 4,500 × 4,060 mm Hjdpfoy A Dymjx Af Uel Machine weight: approx. 9,650 kg Max. saw blade lift: 45–1200 mm Gauge between rails: 2220 mm Distance between rails and saw blade: 300–1455 mm Saw carriage feed drive (forward/backward): motor with gearbox Saw vertical movement drive (up/down): motor with gearbox Turners, hooks, slab-dumping system and rollers drive: hydraulic Saw feed speed: 0–42 m/min Height adjustment speed: 80 mm/s Hydraulic power unit capacity (bandsaw): 60 l Hydraulic power unit capacity (log handling): 120 l Total installed power: 59.4 kW Power supply: 3-phase 380–400 V, 50 Hz Control voltage: 24 V AC Emergency brake circuit: compressed air 6 bar Blade cooling: fuel dosing unit (diesel) Extraction: port Ø 200 mm, recommended air flow 5,280 m³/h Features and accessories included in the offer: - Log supports - Log transfer rollers - Log clamping hooks - Log turners - Control panel - Hydraulic power unit - Joystick control - Saw blade guard with safety interlock - Emergency stop button - Documentation, spare parts list, hydraulic, pneumatic, and electrical schematics