Karšto Ūkio Įranga pirkti naudotą (24 658)

Būklė: labai geros būklės (naudotas), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used to carry out temperature shock tests and is typically utilized in industry, research, and quality assurance sectors. Application areas: - Material testing - Aging tests - Electronics and component testing - Temperature shock and thermal cycling tests Technical Data: Type: TSS-70/130 Bwjdpfxey Hkd He Aa Dor Test chamber volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient to +180°C Cooling rate: approx. 4 K/min from ambient to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change speed: - Max. 100 K/min mean for shock test cycles (without heat radiation) Changeover speed: - ≤ 15 min between -65°C and +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical Data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Rated current: approx. 29 A On-site fuse: 32 A slow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / Features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs possible) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external test item control - Fault signal on potential-free contact Load capacity up to 30 V DC, 2 A EMC tested Technical Design: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / transfer basket made of stainless steel, material no. 1.4301 - Insert rack made of stainless steel wire - Tubing port NW 50 with sealing plug - Compressed air connection 1/4" male thread - Condensate drain, non-pressurized R 1/2" female thread - Safety door locking mechanism - Lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Intake dimensions approx.: 1990 x 940 x 1652 mm Chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh Important safety information for buyers: The following measures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Mitutoyo Model: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture: 2017 – incl. software & accessories For sale is a high-quality Mitutoyo QS250Z CNC vision measuring machine from 2017 in very well-maintained condition. This is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics processing, and much more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: • 2D coordinate measurement • Contour and profile measurement • Determination of distances, radii, angles, and diameters • Measurement of holes, slots, edges, and complex geometries • Serial measurements with automated measurement programs • Documentation and report generation via Mitutoyo software The measurement is performed contact-free by a high-resolution camera system with image processing. Ideal for delicate or small components where tactile measurement is unsuitable. Thanks to CNC control, automated measuring processes are possible—perfect for repetitive inspection tasks. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code no.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): 150–200 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see pictures) • Mitutoyo QS250Z main unit • Joystick box • Software package: - QS-ConfigDisk - QSPAK - FORMTRACERPAK-AP Bedpfx Aoynkbaea Dowr - MiCAT Vision / Form • Manuals & documentation • Various electronic boards (see images) • Additional accessories as shown (Subject to changes and errors in the technical data. All specifications are without guarantee!) Further questions? We are happy to answer your questions by phone.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests on lithium-ion energy storage systems. Special Added Value: The unit is constructed to safely detect, monitor, and securely contain critical battery events up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) - Conduct aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Temperature endurance and temperature cycling tests - Testing unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test laboratories & safety testing - Automotive / e-mobility / energy storage Bwodpszizr Rjfx Aa Dor The P Plus package transforms the KB 720 into a genuine battery safety test chamber: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Fire detector with visual & audible alarm - Mechanical double-door locking (safe containment) - Spark protection in the interior - Exhaust vent with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual activation of the suppression system - Access ports for charging and measuring cables Result: The unit is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, without explosion or uncontrolled spread. Not an abuse or destruction test device, but a reliable, standard-compliant test chamber for actual operating and fault scenarios. Technical key data: - Temperature range: –10 °C to +100 °C - Chamber volume: approx. 698 liters - Trays: 4 × stainless steel - Max. load per tray: 45 kg - Max. total load: 100 kg Electrical data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why is this device special? - True battery safety test chamber - Suitable for EUCAR hazard level 5 - Integrated CO₂ fire suppression system - Large chamber (≈700 l) - High market & resale attractiveness - Weight: approx. 285–300 kg - Condition: used - Scope of delivery: (see image) (Subject to technical modifications and errors in data!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bendras svoris: 500 kg, Taip pat žr. pagrindinį puslapį: bdtronic.com/de-de/heissnietanlagen/vollautomatisch-heissnieten/ Bodpfoy Nzhbsx Aa Dowr Be to, yra ir daugiau panašių įrenginių. Šiuo metu fiziškai randasi dukterinėje gamykloje.

Būklė: naudotas, Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SNDE106744, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, Vacuum potting system was used for casting epoxy resin into plastic housings. Bwsdpfxsvnrz Dj Aa Der

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded Bwodpfx Aaozizghj Der - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW Bwedpfjzizdyox Aa Djr - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Mettler Toledo Type: TGA/DSC 1 STAR® Description For sale is a METTLER TOLEDO TGA/DSC 1 STAR® system, a high-quality and precise laboratory instrument for thermal material analysis. Bwedpfxezix Dds Aa Dsr This device combines Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) in one system, making it ideal for use in industry, research, material testing, and quality assurance. Features & Applications - Thermogravimetric analysis (mass changes) - DSC analysis (heat flow, melting points, Tg) - Analysis of plastics, polymers, chemicals, pharmaceutical substances, and materials - Temperature- and time-dependent measurements - High precision and stability - Network and PC connectivity (STAR® system) Technical Data (approx.) Dimensions: approx. 500 × 500 × 600 mm Manufacturer: METTLER TOLEDO Model: TGA/DSC 1 STAR® Sensor type: SDTA FRS2 Power supply: 100–240 V / 50–60 Hz Power consumption: approx. 300–600 W Weight: approx. 35–45 kg Important Note: "The table shown in the pictures is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications are subject to change and mistakes excepted!) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), EOS EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The system has been regularly maintained (last service 08/2024). The unit has only been used with PA11 (EOS PA1101). Unit includes accessories: 1 x Build Box, Docking Station, Multibox with chiller. Operating hours: 5962.3 h “The printer is equipped with a new IntelliScan III scanner, including laser deflection head, and has been thoroughly tested.” For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing processes (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet and control terminal Exchange frame with build platform Blade cassette II (blue) Software: Windows 7 Process Software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical capacity: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. quantity 420 g) The Multibox is a standard accessory on EOS systems for powder management and allows for transport and interim storage of material. Technical Specifications: Laser and Optics: Laser type: CO₂ laser Nominal power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure field: 350 × 350 mm Beam deflection speed: max. 6 m/s Bwodpfx Aozixziea Dor Mechanics & Build Volume: Build space: 350 × 350 × 620 mm X axis (coater): travel distance 690 mm, speed max. 200 mm/s Z axis (build platform): travel distance 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin-tube radiator with pyrometer control Removal chamber heating: 1.6 kW, resistance heating coil with separate temperature measurement Control & Operation: Process computer with Windows 7 operating system 15.1" TFT display, membrane keyboard & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Nominal power: 10 kW Rated short-circuit current: 5 kA Current consumption (full load): 16.0 A Network fuse: 32 A Total weight: approx. 1,400 kg Condition: used Scope of supply: (see image) Base machine with control cabinet & control terminal Exchange frame with build platform Blade cassette II (blue) Software: Windows 7 Process Software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information subject to change and error!) We are happy to answer further questions by phone.

Būklė: geras (naudotas), Gamybos metai: 2012, Lothar Starke Airless stūmoklinis siurblys HP 4/32 Bwodpfx Aaoy A Tpqo Dor Lothar Starke Airless įrenginys su dažymo pistoletu Trikojis stovas Santykis: 32 / 1 Pakuotė su filtru Suslėgto oro manometras Gera būklė Vieta: sandėlyje 54634 Bitburg - galima iš karto -

Būklė: naujas, Electric Heated Platen Press Manufacturer: SCM Model: GS 6/90 30-13 Offer type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of heating platens: 2 pcs Max. temperature of heating platens: 120°C Recommended working temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Bwjdpfx Aefh Tmmsa Djr Pressing force: 90 t (900 kN) Press cylinder diameter: 70 mm Number of daylight openings: 1 pc Daylight opening approx.: 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminum sandwich platens by ELKOM - Germany. Continuously adjustable up to 120°C, up to 150°C on request. Thermal insulation between platens and press frame. The heating platens are mounted with special brackets to allow necessary thermal expansion. Hydraulics: Compact hydraulic pump by HAWE Germany, integrated in the press frame. 2-stage design for closing and pressure build-up phases. Hydraulic cylinders made from high-grade, tempered, and ground steel with large diameters. Press Frame: The press frame is constructed from heavy-duty, torsion-resistant, stress-relieved welded steel. Presses of the GS series can be loaded from all four sides. Press tables are welded from HEA profiles. Precision machining of all assemblies is performed on state-of-the-art CNC machining centers. Uniform and precise movement of the press table is ensured by rack-and-pinion drives and self-lubricating guides at two corners of the press frame. Control System: Side-mounted control panel with SIEMENS 7'' color touchscreen. SCM's proprietary software enables simple and intuitive control of the press. The following parameters can be programmed, retrieved, and changed: - Automatic calculation of the maximum permissible hydraulic pressing force based on the workpiece size. - Ability to store up to 100 programs (temperature, specific pressure, pressing time, platen size). - Direct setting of hydraulic pressure - Option for internet connectivity for remote service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault messages displayed on the screen. OPTIONAL: - Electronic flatness control (misplacement monitoring) - MYLAR film for protection and easy cleaning of electric platens - Surcharge for pressing force 120 t - ELKOM platens with gold anodized finish

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, lazeri tipas: šviesolaidinis lazeris, lazerio galia: 3 000 W, Įranga: CE žymėjimas, Lengva lazerinė vamzdžių pjovimo technologija – patikima, universali ir pelninga Ekonomiškas lazerinis vamzdžių pjovimas iki 170 mm išorinio skersmens: net ir esant mažam apkrovimui. Nesvarbu, ar norite patikėti kokybės kontrolę, greičiau ir lanksčiau gaminti, ar pritraukti naujų klientų ir plėsti rinkas: „TruLaser Tube 3000“ yra jūsų mašina, kuri dėl paprasto naudojimo idealiai tinka pradedantiesiems arba kaip papildoma mašina. Įskaičiuota: Vamzdžių atrama (žaliava) su automatiškai nuleidžiamomis vamzdžių laikikliais Bwjdpfxezi Rc Ee Aa Dor Kietojo kūno lazeris „TruFiber 3001“ Mašinos stalas 6,5 m ilgio žaliavai Išleidimo stotis 3 m ilgio gaminiams (įskaitant šlamano talpą) „LoadMaster Tube“ 6,5 m ilgio žaliavai (įskaitant plokščią dėklą) automatiniam pakrovimui Papildomos galimybės: Mašinos stalas 8,0 m ilgio žaliavai pakrovimui ir iškrovimui Technologijos paketai: įstrižas pjovimas, greitas pjovimas ir suvirinimo purslų kiekio mažinimas („Spatter Guard“) Suvirinimo siūlės atpažinimas („SeamLine“) iš vidaus ir išorės Labai pažangi ir paprasta „TRUMPF“ programavimo sistema „Programming Tube“ Paslaugos: Montavimas, paleidimas, instruktavimas 12 mėnesių garantija Nuotolinės techninės priežiūros sutartis pirmiesiems metams „TRUMPF“ kokybė Visame pasaulyje mūsų greita nuotolinė techninės priežiūros komanda pasirūpins jūsų klausimais. Daugiau techninių duomenų rasite duomenų lape arba mūsų svetainėje. Jei turite klausimų, susisiekite su mumis. Apie „TRUMPF“: per daugiau nei 100 metų istoriją turėjome galimybę dalyvauti kuriant tūkstančius metalo apdirbimo gaminių tik Vokietijoje. Šia patirtimi kasdien dalijamės su savo klientais. Siūlome inovatyvias mašinas ir funkcijas, visapusiškiausią paslaugų koncepciją rinkoje, taip pat ekspertus programinei įrangai, automatizavimui ir „Smart Factory“. Visada pateikiame individualų pasiūlymą, pritaikytą jūsų poreikiams. P. S.: Taip pat mielai padėsime finansavimo klausimais. Naudodamiesi „TRUMPF Financial Services“ finansavimo, lizingo ar „Pay-per-Use“ modeliais, padėsime jums spręsti finansines ir verslo problemas.

Būklė: naudotas, pavaros tipas: kitas, kuro tipas: dyzelinas, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: naudotas, pavaros tipas: kitas, kuro tipas: dyzelinas, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: naujas, pavaros tipas: kitas, kuro tipas: dyzelinas, vairuotojo kabina: kitas,

Būklė: naujas, pavaros tipas: kitas, kuro tipas: dyzelinas, vairuotojo kabina: kitas,

Būklė: naudotas, pavaros tipas: kitas, kuro tipas: dyzelinas, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: naudotas, pavaros tipas: kitas, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: naudotas, pavaros tipas: kitas, kuro tipas: dyzelinas, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: naudotas, pavaros tipas: kitas, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: naudotas, pavaros tipas: kitas, kuro tipas: dyzelinas, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: naudotas, pavaros tipas: kitas, kuro tipas: dyzelinas, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: naudotas, pavaros tipas: kitas, kuro tipas: dyzelinas, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: naujas, pavaros tipas: kitas, kuro tipas: dyzelinas, vairuotojo kabina: kitas,

Būklė: naudotas, pavaros tipas: kitas, kuro tipas: dyzelinas, rida: 1 001 km, vairuotojo kabina: kitas,